Showing 1062 items
matching bendigo heritage
-
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Uniform Coat, unknown
... Bendigo Tramways (managed by the Bendigo Heritage ...This object is part of a collection of items donated by the Hopgood family that belonged to Bendigo Tramways employee, Barry Hopgood.Green, woollen coat with cotton lining, leather trim and brass buttons. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Ticket Punch, approx October 1921
... Bendigo Tramways (managed by the Bendigo Heritage ...Brass & metal alloy ticket punch'10'/21 and 'TB' -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Service Record, 1914-1969
... Bendigo Tramways (managed by the Bendigo Heritage ...Photocopy of a 20-page, ruled, A4 document, hand-written in black ink. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Bendigo Tramways Timetable, Official Bendigo Tramways Time Table, June 1940
... Bendigo Tramways (managed by the Bendigo Heritage ...Small Bendigo Tramway Time table booklet, orange outer, printed white paper inner containing Schedule of Fares, charges including Luggage & Parcels prices. Bendigo Tramway routes showing sections and fares..bendigo tramways, bendigo, sec, state electricity commission of victora -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Photographs, Bendigo Birney Trams, July 1961
... Bendigo Tramways (managed by the Bendigo Heritage ...Original black and white, gloss photograph.July 1961 -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Photograph, Bendigo Tram No17
... Bendigo Tramways (managed by the Bendigo Heritage ...Tram Number 17 known in Bendigo as the Summer Tram. Now (2015) fully restored, Photo was taken by Lloyd Rogers Black and White Photographtoast rack tram, bendigo, tram -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Photograph, Bendigo Tram number 6, Single truck combination, scrapped 1956
... Bendigo Tramways (managed by the Bendigo Heritage ...Bendigo Tram The second Tram to carry the number 6, Number 6 was scrapped in 1956, Former Prahran & Malvern Tramways Tram. photographed 19 Jan 1962 by Lloyd Rogers at Myers Flat west of Bendigo.Black and white19th Jan '63 Myers Flat near Bendigo. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
BOOK, 'THE FIRST ELECTRIC ROAD A history of the Box Hill and Doncaster tramway' by Robert Green, 1989
... Bendigo Tramways (managed by the Bendigo Heritage ...This item was donated to the Bendigo Tramways Depot Archives by the author, Robert GreenThis is a history of the first electric tramway in Australia.The history of the first electric tramway in Australia, and the southern hemisphere, examining the conflicts and challenges faced by all those involved. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Black and White Photograph, Tram Number 2, Bendigo, 20/04/1962
... Bendigo Tramways (managed by the Bendigo Heritage ...Built By Adelaide firm, Duncan & Fraser in 1916. Tram number 2, first operated in Melbourne as Hawthorn Tramways Trust number 20. She was transported to Geelong Tramways Trust in 1947 and changed to Number 34. Following the closure of the Geelong Tramways in 1956, the tram transferred to Bendigo where it became Tram Number 2.Tram number 2, climbing View Street Bendigo. 20th April 196220th April 1962tram, bendigo. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Black and White Photograph, Mitchell Street Bendigo. circa 1905, circa 1905
... Bendigo Tramways (managed by the Bendigo Heritage ...Street view, looking East along Mitchell Street BendigoMitchell street Bendigo, looking east. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Tram Rail, Assembly (circa 1990) using Tramways Rail (circa 1890)
... Bendigo Tramways (managed by the Bendigo Heritage ...Made at the Bendigo Tramways, to mark the one hundred year celebration of the Battery powered trams in BendigoSmall specimen of tram rail painted gold fixed to wooden base with brass plaque.THE BENDIGO TRAMWAYS 1890-1980 ORIGINAL 1890 BATTERY TRAM TRACK No 49 -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Trolley Wheel, unknown
... Bendigo Tramways (managed by the Bendigo Heritage ...Trolley wheels are used to contact the overhead copper wire, they rotate and connect the DC power to drive the tram's electric motors.Brass trolley wheel mounted on a turned wooden support.bendigo tramways, tram, trolley wheel, -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Internal Tram bell, circa 1980
... Bendigo Tramways (managed by the Bendigo Heritage ...Brass bell, support arm and leather pull strap. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Bendigo Easter Fair, 21/4/1962
... Bendigo Tramways (managed by the Bendigo Heritage ...Photograph taken at the Bendigo Easter Fair 21/4/1962, Charing Cross.Colour Photograph.A/40/62 -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Five Lions Hotel, Bendigo, 1962
... Bendigo Tramways (managed by the Bendigo Heritage ...Tramcar number 5, turning into Barnard Street from View Street Bendigo. On the 21st April 1962. The Five Lions Hotel was removed to make way for a Service Station and later a Chemist.Colour Photograph -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Bendigo Easter Fair. 1962, 21/4/1962
... Bendigo Tramways (managed by the Bendigo Heritage ...Bendigo Easter Fair, Tramcar 23 passes the Fountain, Charing Cross 21/4/1962Colour PhotographA/40/62bendigo, tram, bendigo easter fair. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Book, Brush Tramcar Engineers, Brush Electric Street Cars, Early 1900's
... Bendigo Tramways (managed by the Bendigo Heritage ...This book contains examples of various types of electric tramcars for street services, they are presented in the pages, together with some illustrations of standard trucks. The Tramcar Works of the Brush Electrical Engineering Co. at Loughborough was the largest in the United Kingdom during the early 1900's.Only copy of this book known Burgundy with Gold embossed lettering on a hard cover book, printed paper pages.The Electric Supply Company of Victoria Ltd.tram, bendigo, brush, tramcar. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Tram Tickets, circa 1970
... Bendigo Tramways (managed by the Bendigo Heritage ...State Electricity Commission of Victoria, Tickets used on the last tram rides in Bendigo. 16th April 1972.Electricity Commission of Victoria, Provincial Tramways Tickets. Stamped Bendigo Tram Last Day 16th April 1972Stamped in red ink, Bendigo Tram Last Day 16th April 1972 -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Staff Photograph, 1923
... Bendigo Tramways (managed by the Bendigo Heritage ...1923 Bendigo Tramways Staff formal photograph, taken in front of the Bendigo Trades Hall Council Building View Street Bendigo.Black and white photograph stuck onto a grey matt cardboard.Dated 1923 -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Photograph, The Electric Supply Company of Victoria Limited, Bendigo Branch, unknown
... Bendigo Tramways (managed by the Bendigo Heritage ...Black and White PhotographThe Electric Supply Company of Victoria Limited. Includes a list of names, which are mostly not readable. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Bendigo Tram No 19 and six employees, circa 1935
... Bendigo Tramways (managed by the Bendigo Heritage ...Built by Duncan & Fraser South Australia in 1917, for the Hawthorne Tramways Trust. Sold to SECV Bendigo Tramways in 1935. Pictured from left W. J. Evans, (superintendent) P. Pithie, (Senior traffic inspector) A. Holl, (tramways inspector) H. Rexstraw. (Motorman) on tram W. O'Brien Good condition -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Charing Cross, circa 1910
... Bendigo Tramways (managed by the Bendigo Heritage ...Sepia Photograph, Bendigo Charing Cross, a street scene looking North towards the Bendigo Post Office.Mr Barton written on back -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Order Guide, Order Guide for Parts of Brill Trucks, 1911
... Bendigo Tramways (managed by the Bendigo Heritage ...Brown cardboard cover, printed in Gold and Black. Embossed. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Book, The Electric Tramcar Handbook, 1909
... Bendigo Tramways (managed by the Bendigo Heritage ...A brown hard cover reference book, designed for use by Motormen, Inspectors and Depot Workers, by W.A. Agnew.Stamped on first page; Agents for Western Australia. H.B. ALBERT & CO. Book & Music store 20 to 38 Central Arcade, Perth. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Reference Book, Albert J. Mullett, Government Printer, Melbourne, Handbook to Victoria- British Association for the Advancement of Science, CIRCA 1914
... Bendigo Tramways (managed by the Bendigo Heritage ...1914 Handbook prepared for the members of the "British Association for the advancement of science" on the occasion of their visit to Victoria, under the direction of the Victorian Executive Committee. Hard covered green handbook, gold leaf lettering. Printed text with Illustrations, Maps, Plans and Diagrams.Stamped: "WITH THE COMPLEMENTS OF THE GOVERNMENT STATIST." victoria, 1914, education, population, immigration, mining, geology, land, law, government, forestry, maps, public works. -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Book, Editors- Various. Wholly set-up, printed & bound in Australia for Hutchinson & Company Ltd. by the Specialty Press Pty Ltd, Three Decades
... Bendigo Tramways (managed by the Bendigo Heritage ...With the compliments of The Chairman & Commissioners of the State Electricity Commission of Victoria 1948. Includes Foreword by the Hon. T. T. Hollway Premier of Victoria.History of the State Electricity Commission of Victoria, inception to Dec. 1948sec, state electricity commission of victoria, tram,, victoria, melbourne, bendigo, yallourn, kiewa, morwell -
Bendigo Tramways (managed by the Bendigo Heritage Attractions)
Photograph copy, Brunswick Tramways Cricket Club, circa 1910
... Bendigo Tramways (managed by the Bendigo Heritage ...Brunswick Tramways Cricket Club Premiers MTCA 1908-9 1909-10. Photo contains pictures, names and title of club officialsBlack & White Photograph copy of original.Presented to R Mc Dowell, by the players and officers of the club.brunswick, tramways, cricket club 1909, tramways, cricket club, brunswick -
Vision Australia
Painting - Artwork, Portrait of John Wicking, 1980
Framed portrait of John Wicking who was President of the Association for the Blind 1973-1984 as well as a generous benefactor. It is part of a series of paintings commissioned by the AFB Board to commemorate the work of past presidents of the organisation. Mr Wicking wears a navy suit, white shirt and navy blue Kiwi tie. John Wicking served as President of Vision Australia from 1973 to 1984 and as Vice President in 1990. He was Managing Director and Chairman of Kiwi International when he was introduced to the Committee in 1971. With a natural air of authority, he was known to be both strong and wise. One of the first hurdles Mr Wicking faced following his election as President in 1973 was understanding the health service system and sorting out the differing views of committee members over recommendations for projects costing hundreds of thousands of dollars with no funds to implement them. The ten years of his Presidency were a time of exceptional growth and expansion. He was instrumental in acquiring an adjacent property to those already owned in Glenferrie Road in 1974 at a cost of $120,000, on which the Low Vision Clinic was erected – the first of its type in Australia. Land was also bought in both the metropolitan and country areas for future expansion. Day care centres were opened in Ballarat and Bendigo and new metropolitan services commenced. Mr Wicking formed a committee to explore the possibility of a radio station people unable to read standard print. As a result 3RPH commenced broadcasting in 1981. Mr Wicking was also involved in the incorporation of Vision Australia under the Companies Act in 1990. After his retirement as President Mr. Wicking continued as a committee member until 1994. In 1995 he was instrumental in the establishment of the Tilly Aston Heritage Collection, on which he served as Chairman until sadly passing away in 2002. 1 art original in old gold frameThe plaque at the base of the painting reads 'Mr John O. Wicking AM / President 1973-1984 / Association for the Blind'. association for the blind, vision australia, john wicking -
Friends of Kurth Kiln
Pederic Gas Producer, ~1939
The Unit was picked up from a paddock on a farm in Bagshot, near Bendigo. It was donated to the Friends of Kurth Kiln Heritage Collection by the Family of Cyril H Peatling on 23 December 2006.Gas Producer Units are of significance to Kurth Kiln because they demonstrate the enduse of the charcoal that was created at Kurth Kiln. Considerable documentation has been made available to us on its history, including a picture of the truck is was mounted on. A Gas Producer Unit that converted charcoal into a gas suitable for the combustion engine. Used on motor vehicles during WWII petrol rationing restrictions. It consists of a hopper to hold the charcoal and a firebox to generate the gasNameplate missinggas producer, bagshot, wilma -
Puffing Billy Railway
Double Headed Rail, circa 1872 - 1883
Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.