This was the first rock drill to be made in Australia and was made in Maldon. It was used in the Carmen's Tunnel mine Maldon.Oswald pneumatic rock drill. What appears to be an operating lever extending to one side. Body only, no drill bits. Unpainted.Cast in relief on body "Late / R. D. Oswald / Maldon".tools, machinery, metalwork, mining

Used in the late 19th or early 20th CenturyA two piece steel Burritt Combination Clamp and Drill (clamp is missing) with a wooden handle at the top that turns to operate the mechanism. It was used in the late 19th or early 20th Century.1901 - 1908 Brand: O.W. Burritt & Bro Weedsport, NY, USAdrills, push drills, hand drills, tools, hand tools, clamps, handscrew clamps

Used to drill railway sleepers in the early 20th Century.'Jigger" - an antique steel large two piece drill used to drill railway sleepers around the early 20th Century. The 50cm drill piece can be detached and replaced and it has a handle with a knob on top to turn the drill. The drill is attached by a bolt and screw.steel, metal, tool, drills

Used in the late 19th centuryA forged steel Bit brace with a large screw to secure the drill bit and a knob at the end of the turning handle. It was used in the late 19th century.on the knob - "10" is stampedsteel, tools, carpentry tools, woodworking tools, cutting tools

Used in the 19th centuryA two piece large wooden handled Auger or steel drill bit with the insignia 'Hardypick, Sheffield, England' stamped on the top of the drill bit. It was used in the 19th century to drill holes in especially large wood.'Hardypick, Sheffield, England'steel, wood, woodworking tools, carpentry tools, auger bits, augers, cutting tools

A steel manual breast drill with an attached curved flat plate at the top to apply pressure with the chest.. This plate is attached to the drill by a screw. A wooden handle turns the drill mechanism to operate it and a second wooden handle is to steady the operation. It was used for making cylindrical holes by rotation.drills, push drills, hand drills, tools, handtools, breast drills, woodworking tools

This style of geared drill was commonly referred to as an egg-beater drill and was first patented in 1838. During the late 19th century these drills became more common due to the development of mass production. Users also began to mount the drill onto a frame. This allowed greater control over the drill and removed the need to be holding it in both hands. This gave the operater greater control over the item to be drilled. The drill could be easily removed when required. This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools. The construction of the basic wooden frame also demonstrates the ingenuity of early pioneers and tradesmen in adapting tools to suit their own needs.A metal hand drill which has been mounted on to an improvised wooden stand. hand tools, mass production, egg beater drills

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century.Pattern; hexagonal wooden shape painted orange. The thick carved wooden shape is in halves forming a hole when locked together with the dowel pegs and opposing drilled holes. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

BHS CollectionTimber wine press screw. Large timber screw inserted through a rectangular block of timber. Top of screw is cylindrical in shape and has has a hole drilled through the half way point.

Small hand drill with holding handle with a winding handle with " Leytool - made in England" Covered by Pat No. 20987/44 World PatentsAs abovetools, drill, leytool

Small hand 'stanley' drill with red dial with a handle and a wooden knob. A '104' drill, has a handmade replacement handle.C0525 0255 on Dialtools, hand drill, stanley