Showing 233 items
matching forests commission victoria
-
Forests Commission Retired Personnel Association (FCRPA)
Buckingham steel climbing spurs (missing leather straps)
Spurs were attached with leather straps which held them to the climbers legs. The straps are missing on this pair They have a contoured shank with offset stirrup for the climbers boots Buckingham manufacturing dates back in America to 1896. Climbing spurs were made in their blacksmith shop and were popular with linesmen, loggers and tree arborists. Buckingham steel climbing spurs -
Forests Commission Retired Personnel Association (FCRPA)
Wooden tree measuring calipers (inches)
Foresters usually measure the diameter of trees at Breast Height – traditionally 4 foot, 6 inches – now 1.3 m – which is termed Diameter Breast Height Over Bark (DBHOB). The most common way to measure tree diameter is to place a calibrated tape around the stem at breast height. It’s simple, but can be slow, particularly if the scrub is thick, or if there are heaps of trees. A tree caliper is another quick method of estimating DBHOB. Wooden tree measuring calipersMeasurements are in inches (pre metrication in 1974) A crown faint crown mark (331) and crows foot is visible on one end forest measurement -
Forests Commission Retired Personnel Association (FCRPA)
IBM Port-A-Punch
... Forests Commission Retired Personnel Association (FCRPA) 94 ...The Forests Commission began using computers in the 1960s for resource inventory under the Chief Forest Assessor Murray Paine IBM introduced the Port-A-Punch in 1958 as a fast, accurate means of manually punching holes in specially scored IBM punched cards. Designed to fit in the pocket, Port-A-Punch made it possible to create punched card documents anywhere. The product was intended for "on-the-spot" recording of data such a assessment plotsThe IBM Port-A-Punch prepared computer data and programming cards. Normally there is a a separate stylus pen, similar to a ball-point pen to punch the holes in the cards, but it is missing This instrument consists of a plastic frame that holds 13 long plastic rectangles along its length. A transparent plastic template which has an array of evenly spaced holes fits over the rectangles, and cards are placed over this. IBM Portapunchforest measurement -
Forests Commission Retired Personnel Association (FCRPA)
Basal Area Angle Gauge
Foresters usually measure the diameter of trees at Breast Height – traditionally 4 foot, 6 inches – now 1.3 m – which is termed Diameter Breast Height Over Bark (DBHOB). Basal Area is the cross section of the tree trunk at breast height, and the sum for the stand or group of trees is expressed square feet per acre (after 1973 it was expressed in square metres per hectare). Lots of skinny trees, or a few fat ones, can have the same Basal Area, but when combined with the number of stems, Basal Area is a good indicator of stand density. Two common methods are used to measure of Basal Area – fixed area plots and angle count sampling. 1. Fixed area plots require setting out a small area, commonly 50 m x 20 m, and measuring all the trees at breast height, and doing some quick sums. 2. Angle count sampling involves a simple sweep of the forest from a fixed sampling point using a relascope, dendrometer sight, angle gauge, or glass wedge prism. This wooden builders ruler has been shaped at one end to create a shallow angle (usually less than 3 degrees). Standing in one spot, a sweep is made with the wedge held to the eye, and trees are counted as either “in” or “out”. The number of trees is multiplied by conversion factor of the wedge (10 in this case) to estimate basal area. It’s very quick and effective.Basal Area Angle Gauge The two ends fold up and one end (on the right) has been reduced in width to create a shallow angle for the viewer Home made by cutting down a wooden builder's ruler Many forestry students made their own Basal Area Angle Gauges and its thought this may be oneforest measurement -
Forests Commission Retired Personnel Association (FCRPA)
Gunter's Chain
Before metrication was introduced into Australia in the 1970s land was measured in chains and links. Many old parish plans show length measurements in chains and links. Area was shown in acres, roods and perches. Gunter's chain was used for measuring distance in surveying. It was designed and introduced in 1620 by English clergyman and mathematician Edmund Gunter (1581–1626). Gunter developed the measuring chain of 100 links. The chain and the link, became statutory measures in England and subsequently the British Empire. After metrication units of length were measured in meters and area in hectares. The chain was later superseded by steel ribbon tape.The 66 foot long brass Gunter's Chain is divided into 100 links (each 7.92 inches long), and marked off into groups of 10 by shaped tags which simplify intermediate measurement. It was heavy but flexible enough to be dragged through the bush on surveying transects.(Hence the common forestry term "chainman). The chain was a precision part of a surveyor's equipment. It required frequent calibration, yet needed to be sturdy enough to be dragged through rough terrain for years. It has brass hand grips at each end of chain. 1 chain = 100 links = 22 yards = 66 feet = 792 inches. 10 chains = furlong 80 chains = 1 mile 1 acre = 10 square chains = 4 roods (1/4 acre) = 40 perches.forest measurement -
Forests Commission Retired Personnel Association (FCRPA)
Bushfire Awareness - gallows sign
Bushfire awareness gallows signs were common features during the summer fire season and hung outside both FCV offices and on major roadways This large metal sign has different text on each side and the text and lettering is simple enough to be read from a moving vehicleBushfire Awareness - gallows signbushfire -
Forests Commission Retired Personnel Association (FCRPA)
Myrtleford Forest District office sign, Included Oven's nursery
This metal and enamel sign is believed to have hung outside the Myrtleford Forest District Office. It includes directions to the Ovens Nursery, Office and Residence Phone numbers, radio call signs (VL30V) and office hours are included It also makes reference to hardwood and softwoods In 1956, the new Chairman of the Forests Commission, A V Galbraith, introduced a major restructure of the organisation to create 56 Forest Districts. The process included amalgamating the plantations and hardwood divisions, which had been separate and rival entities up to that time. Things remained largely unchanged for the next three decades until the early 1980s.Myrtleford Forest District office sign -
Forests Commission Retired Personnel Association (FCRPA)
Shooting Prohibited Sign - canvas, 1953
Signs were erected around the forest to restrict the use of firearms.Shooting Prohibited sign - canvas -
Forests Commission Retired Personnel Association (FCRPA)
Dugout sign, Post 1966
Considered in terms of both loss of property and loss of life, the Black Friday bushfires on 13 January 1939 were one of the worst disasters to have occurred in Australia and certainly the worst bushfire up to that time. The fires burnt 2 million hectares, 69 sawmills were destroyed, 71 people died, and several towns and sawmills were entirely obliterated. Among those killed were four men from the Commission The subsequent Royal Commission conducted by Judge Leonard Stretton has been described as one of the most significant inquiries in the history of Victorian public administration. Its recommendations led to sweeping changes. In addition to building dams and water points, the Stretton Royal Commission recommended expanding and controlling the use of bushfire dugouts at forest sawmills. Well-constructed dugouts had saved the lives of many sawmill workers and their families during the 1939 bushfires. But in some locations, they had proved fatal. Dugouts became mandatory for those few sawmills that remained in the forest after the 1939 fires. Many remote logging coupes and FCV roading camps also had dugouts. The local District Forester was required to make annual pre-season inspections of all dugouts on State forests and those within the Fire Protected Area (FPA). Some were built privately on private land. Most were primitive construction with a log or corrugated iron roof covered with earth. A hessian bag often hung at the entrance to keep the heat and smoke out. But they were dark and damp with snakes and other creepy crawlies often lurking inside. By 1940-41 there were 19 new dugouts constructed by the Commission and a further 128 by forest licensees. Ten years later there were 8 new Commission dugouts and 21 new ones built by other interests. By 1960-61 the rate of new builds was declining but the Commission still managed 103 dugouts while 127 were looked after by others. However, as the forest road network improved and gave all-weather access to modern two-wheel-drive vehicles the reliance on dugouts receded.Large metal sign that was positioned near forest dugoutsbushfire -
Forests Commission Retired Personnel Association (FCRPA)
Fire tower warning sign
bushfire -
Forests Commission Retired Personnel Association (FCRPA)
Back pack (for radio gear)
Back pack used to carry portable two-way radios and spare batteries to remote bushfiresCanvas backpackFCV Radio Labbushfire -
Forests Commission Retired Personnel Association (FCRPA)
Back pack (for personal gear)
Canvas bag issued to FCV staff to take personal belonging to bushfiresCanvas Bag for personal gearRus Ritchie, Divisional Forester, Wangarattabushfire -
Forests Commission Retired Personnel Association (FCRPA)
Safety hardhats
... Forests Commission Retired Personnel Association (FCRPA) 94 ...The Forests Commission took safety very seriously, long before it became standard practice in the bush. The Chairman of the Commission, Alan Threader, personally chaired the safety committee Sandy Dobbin was appointed as the first "safety officer" in the early 1970s There were many innovations including safety boots and safety hardhats. Safety hardhats. One new hat with "two trees" FCV logo. One with hat with older style FCV sticker belonging to District Forester Col Almond (decorated with logos from the amalgamated CFL agencies). -
Forests Commission Retired Personnel Association (FCRPA)
Wicker basket to transport seedlings
Seedlings were lifted from seedbeds in FCV nurseries, usually early in the morning, then packed to be transported by road or rail. The seedlings risked damage if they dried out. These baskets were used to transport and protect open-rooted pine seedlings. Thought be used at French Island in about 1920.Large wicker basket used to transport seedlings With metal locking mechanism and wicker handle Donated by FCV forester, Bert Semmensnurseries, plantations -
Forests Commission Retired Personnel Association (FCRPA)
ICI Explosives Sampler
... Forests Commission Retired Personnel Association (FCRPA) 94 ...The Forests Commission had a large and active engineering branch which was often called upon for major demolition or quarry work. Most overseers, as well as some foresters, were trained in the use of explosives to “blow stuff up” such as removing stumps and rocks from roads. Districts usually had a small powder magazine tucked away in the bush for storage of gelignite and detonators.Sample board showing examples of explosives and detonatorsroad construction and maintenance. -
Forests Commission Retired Personnel Association (FCRPA)
Sirex wood wasps
In 1949 the Commonwealth Forestry and Timber Bureau proposed a national planting program to make Australia more self-reliant in timber products after the shortages experienced during the war. The threat of introduced sirex woodwasp from Europe in the early 1950s and its eventual discovery on the Australian mainland in 1961 brought the softwood plantation program into question. However, quarantine and control measures using tree destruction and a nematode parasite was put in place.Sirex noctilio was a serious threat to softwood plantations in AustraliaSirex wood wasps encased in resinplantations -
Forests Commission Retired Personnel Association (FCRPA)
Pulpwood billet hook
Pulpwood was often split by hand or with black powder splitting guns into more manageable sizes and cut into 8 foot lengths (or billets). Billets were first stacked endwise to drain the sap and lighten the load before they were loaded by hand onto flat bed trucks for transport to the mills. This long length metal hook was used to pull and manoeuvre the pulpwood billets onto the truck. The advent of excavators in logging operations in the 1970s led to the loading and carting pulpwood in long tree lengths.Long steel tool with handle on one end and hook on the other. -
Forests Commission Retired Personnel Association (FCRPA)
Driptorch - Firebug (hand held), c 1985
The origins of the humble handheld driptorch have been lost in time. They are widely used for ignition in controlled burning operations in forest and grasslands. The “Pacific Forester“ with its short central wand and somewhat leaky ball-valve was made by the American Wajax company in the 1940s. The Pacific Forester is slightly different in design from the more robust and common “Panama” driptorch first manufactured in 1933 and used extensively by Queensland cane farmers. The Panama is closely related to the current “Firebug” used in Victoria which is manufactured by Rodney Industries in Brisbane and has an offset wand design which gives it good balance. The fuel is a mixture of petrol and diesel and every FCV District had their own closely-guarded secret formula ... 2:1, 3:1, 1:1, 4:1 or 3:2 ratio. There was also the choice of 91, 95 or 98 octane petrol mixed with summer or winter diesel. Occasionally some of the old Avgas or Jet-A1 lying around the depot was added with a splash of engine oil to make the mixture stick to the fuel to be ignited. The fuel mixed also varied between autumn or spring, heathland, mixed forest, or high-intensity slash burnsCommon driptorch used throughout AustraliaDrip torch with handle Wand has loop and valve. The loop is designed to assist with even flow of fuel which flows out onto the burning head of the wand. Pressure equalising value in top of aluminum fuel container which holds 4 litres of burner mix. Gravitational feed of the driptorch allows the unit to drip fire, making it simple and quick to operate. Instructions for use. CF+L written with texta pen.bushfire -
Forests Commission Retired Personnel Association (FCRPA)
Driptorch - hand held - unknown date, design or manufacturer, c 1950s
The origins of the humble handheld driptorch have been lost in time. They are widely used for ignition in controlled burning operations in forest and grasslands. The date, origins and manufacturer of this particular model are unknown. The “Pacific Forester“ with its short central wand and somewhat leaky ball-valve was made by the American Wajax company in the 1940s. The Pacific Forester is slightly different in design from the more robust and common “Panama” driptorch first manufactured in 1933 and used extensively by Queensland cane farmers. The Panama is closely related to the current “Firebug” used in Victoria which is manufactured by Rodney Industries in Brisbane. The fuel is a mixture of petrol and diesel and every FCV District had their own closely-guarded secret formula ... 2:1, 3:1, 1:1, 4:1 or 3:2 ratio. There was also the choice of 91, 95 or 98 octane petrol mixed with summer or winter diesel. Occasionally some of the old Avgas or Jet-A1 lying around the depot was added with a splash of engine oil to make the mixture stick to the fuel to be ignited. The fuel mixed also varied between autumn or spring, heathland, mixed forest, or high-intensity slash burnsEarly driptorch designDrip torch with handle Wand has loop and valve. The loop is designed to assist with even flow of fuel which flows out onto the burning head of the wand. Soldered tin fuel container which holds burner mix. Gravitational feed of the driptorch allows the unit to drip fire, making it simple and quick to operate. bushfire -
Forests Commission Retired Personnel Association (FCRPA)
Burning wand - kerosene, c 1950
The origins of the humble handheld driptorch have been lost in time. They are widely used for ignition in controlled burning operations in forest and grasslands. This "home made" burner wand uses kerosene and dates from the 1950s. It has an unusual long handle with a bend and wick one one end.Unusual "home made" design Long handle burning wand with a wick at one end. Brass flow valve in the middle. Base attached to a container of kerosene and has a screw cap. bushfire -
Forests Commission Retired Personnel Association (FCRPA)
Canvas fire hose and roll carrier
Method of carrying rolled up canvas fire hose. Canvas hose needs to be washed, dried, rolled and stored properly after it has been used otherwise it will rot. Unrolled hose is notorious for becoming tangled. Canvas fire hose and roll carrier. The wire handle separates in the middle to release the hose rollbushfire -
Forests Commission Retired Personnel Association (FCRPA)
Fire hose nozzle(s) with Y joint and brass attachments
Hose nozzle size can affect the stream of water. A smaller hole puts out a longer stream but with less volume. A longer water stream is useful when trying to extinguish fire or sparks high in the tree tops. They were often used with high pressure pumps like the Pacific Marine.Aluminum fire hose nozzle(s) with Y joint and interchangeable brass attachments For 1.5 inch hose with screw attachments rather than modern twist-camm locks. The main nozzle is aluminum alloy and the interchangeable nozzles are made of brass.bushfire -
Forests Commission Retired Personnel Association (FCRPA)
Y Valve
Y valves were used to split water supplies so it could be directed to a number of locations on a fire. In this case four outlets with two controlling valves. Canvas 1.5 inch hose was normally attached Screw connections rather than twist-camm locksY ValveYarrawonga Forests Commissionbushfire -
Forests Commission Retired Personnel Association (FCRPA)
Photo - Royal Australian Engineers - Forestry Company
Soon after the outbreak of World War Two, the British Government requested experienced forestry soldiers from Australia, New Zealand and Canada to be deployed in France as part of the British Expeditionary Force. The first Forestry Company (2/1) was based in Sydney with men from NSW, Queensland and South Australia, led by Captain Cyril Richard Cole, a professional forester from the Australian Capital Territory. The second Forestry Company (2/2) included many Forests Commission staff, local sawmillers and experienced bushmen from Victoria, WA and Tasmania including veterans of the First World War. They were led by Captain Andrew Leonard (Ben) Benallack, a graduate from the Victorian School of Forestry in 1922. Both Forestry Companies sailed from Fremantle on the Stratheden in late May 1940 and landed in England not long after the evacuation of Dunkirk. The foresters were recalled to Australia at the insistence of Prime Minister John Curtin in late 1943 because of the War in the Pacific. After reequipping and some refresher training in jungle warfare at Kapooka the 2/2 Forestry Company was deployed to Lae in Papua New Guinea in May 1944. This photograph was probably taken in Australia before deployment to PNG.Photo in wooden frame of Royal Australian Engineers Forestry Company -
Forests Commission Retired Personnel Association (FCRPA)
Presentation plaque from the "Woodpeckers"
In the post-war era from 1947 to the mid-1980s, the Forests Commission sponsored Australia's only military sawmilling unit, the 91 Forestry Squadron. It was a special reserve unit of the Royal Australian Engineers (RAE). Established and commanded by Commission forester and WW2 veteran, Major Ben Benallack, the "Woodpeckers" as they were known comprised a small pool of specialised soldiers capable of rapid mobilisation in the event of need. Several other Victorian departments such as the State Electricity Commission (SEC) did the same thing who supported a construction squadron based at Newborough in the Latrobe Valley. The scheme created a very active and capable part-time military group that completed many worthy projects across the State. In addition to their military training, the Woodpeckers operated bush sawmills, built timber bridges along the Murray River, the Snake Island Jetty, forest roads and performed various demolition tasks.Presentation plaque from the "Woodpeckers" Mounted on polished wooden burl -
Forests Commission Retired Personnel Association (FCRPA)
Roll of Honour, State Forest Department
Honour boards and rolls were erected in many local schools, halls, churches and offices as a means of acknowledging the commitment made by the community to the military forces. The criteria used for inclusion of names on an honour board were determined by those creating the board and can vary. This board lists the names of 20 people from the State Forests Department who enlisted in WW1. The most significant name is Albert Jacka VC who was perhaps Australia’s finest fighting soldier, and has the honour of being the first Australian to be awarded the Victoria Cross during WW1, the highest decoration for gallantry in the face of the enemy. Most of the other names have been researched.Roll of HonourMembers of the Forest Service of Victoria who enlisted & went to The Great War 1914 - 1919 -
Forests Commission Retired Personnel Association (FCRPA)
Portable UHF Radio - Sawtron / Kyodo, c 1980s
After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. Rapid improvements in technology led to various models of bulky handheld portables with heavy batteries that always seemed to go flat. In fact, batteries were a constant impediment at bushfires. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 4G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s.Portable UHF Radio with leather carrying case and strap. Charging station. Kyodo Model KC-1109 MOYHU Whitfieldbushfire, radios -
Forests Commission Retired Personnel Association (FCRPA)
Base station radio with handset, Mid 1980s
After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 4G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s.Base station radio with handsetRC-4B Amalgamated Wireless Australiabushfire, radios -
Forests Commission Retired Personnel Association (FCRPA)
Phone handset with winder
Dedicated phone lines were often connected between FCV District Offices and firetowers or local depots. These lines were activated by winding the metal handle to ring the bell at the other end of the line.Bakelite phone with handset and winder. Made of Bakelite.radios -
Forests Commission Retired Personnel Association (FCRPA)
Radio set
After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. The communication systems were regarded at the time to be more technically advanced than the police and the military. These pioneering efforts were directed by Geoff Weste, and later technical experts like Rex Philpot, John Whitehead, Charlie Reisinger and many others who designed, built and repaired most of the radio equipment. There was a dedicated radio laboratory at Surrey Hills in Melbourne.Radio setManufactured by McLeod Electric - Derrinallumradios