Showing 496 items
matching heat
-
Melbourne Tram Museum
Document - Report, Melbourne & Metropolitan Tramways Board (MMTB), "Preliminary investigation of track curves designed for regions of acceleration and retardation", May. 1966
Report - Foolscap 9 pages typed carbon copy including drawings, some on heat sensitive paper, with card covers and a red binding strip titled - "Preliminary investigation of track curves designed for regions of acceleration and retardation" Looks at varying curve radius. Dated May 1966trams, tramways, trackwork, melbourne -
Melbourne Tram Museum
Drawing, Commonwealth Engineering (Comeng), "T3000-B Articulated Tram", c1984
Photocopy on heat sensitive photocopy paper of the proposed outline of the B class tram or T3000-B joined on three sheets of paper with tape and staples, Drawing No. A100100669. Tram has number 2000 on the front of it. Gives dimensions and seating arrangements. Would be a Comeng or Commonwealth Engineering drawing.trams, tramways, b class, construction, comeng, articulated trams, tram 2000 -
Beechworth Honey Archive
Uncapping Knife
The knife was placed in hot water to heat. Once heated, it was used for removing caps from individual cells in one sweep across the frame. This exposed the honey before the fame was placed in the extractor.Metal uncapping knife with wooden handle.uncapping, knife, metal, beekeeping, beechworth honey -
Whitehorse Historical Society Inc.
Domestic object - Kerosene Cooking Stove, c1934
The donors advised that it was purchased in England in 1934 by one of the parents (not advised) and then brought out to Australia when the immigrated. It was used by them in the eastern suburbs when the did not have electricity or gas. They later moved to the Dandenongs and again had to use it for cooking.Unit consists of a base with three large adjustable kerosene burners under a grid on which pots and pans were placed. At the right hand end is a round metal enclosure in which is enclosed a large glass bottle with a special top. Bottle is filled with kerosene (Royal Daylight Oil) and inverted. Kerosene then flows from container to burners. Flow is controlled by the adjustable needle jet for each burner.|OVEN is separate and has open frame of holes at bottom. It is placed over one of the burners. Heat of the oven is therefore controlled by adjusting the heat of the burner underneath.|There is a spare burner, trays etc and some spare parts in the oven. There are four parts to the stove.Oven - Valor No 112|Base - Valor No 603|Patent No 333107|Reg Design No 777773 - 1932|Patent No 405758 - 1934domestic items, cooking -
Moorabbin Air Museum
Document (Item) - Calloy - A New Wear Ressistant Material
Description: Date: 21/05/1972 Author: N. Pipers Publisher: Pergamon Press Ltd Pages: 4 Binding: Permanent/Soft Keywords: Vacuum Heat Treatment Level of Importance: World. -
Anglesea and District Historical Society
Clothes Iron, Coleman Lamp Stove Co Ltd, Spirit-fuelled Clothes Iron, Estimated circa 1936
Coleman Lamp Stove Co Ltd possibly making irons by arrangement with Coleman Lamp & Stove Co Ltd in Canada. Origin of these companies - started by William Coleman of Oklahoma and Kansas, USA. Iron has chrome plated sole - blue enamel body with white speckles and hemispherical tank (probably copper - has typical green verdigris appearance) for the lighting fluid that would have supplied the heat. The wooden handle is painted blue. Top screw is missing from the fuel tank.clothes iron -
Bendigo Historical Society Inc.
Document - BILL ASHMAN COLLECTION: CORRESPONDENCE
Unsigned and undated, Blurry carbon print letter with printed letterhead Stevenson Bros., Motor Service Station, Hargreaves Street, Bendigo (next to Crown Hotel). The writer asks for a report on the scalebuoy in relation to the running of the motor, heat, oil, carbon and petrol economy since the purchase of the scalebuoy(s).sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, fargo trucks, de soto cars, stevenson bros, crown hotel -
The Ed Muirhead Physics Museum
Photograph, Cyclotron accelerator
Builit in 1950s and used till the mid 1970s within the Physics Department used in Melbourne. John Rouse and David Caro was involved in the construction.Black and white photo of cyclotron (nuclear physics accelerator): View of DEE & accessories, Ron Gray in background. . Sticky typed label on back from top and right to left: “MAIN MAGNET WATER HEAT EXCHANGE; VIEW OF DEE & BEAM EXIT; COIL CANS” Handwritten on back left hand corner in pen: “Ron Gray” -
The Ed Muirhead Physics Museum
Photograph, Cyclotron accelerator
Builit in 1950s and used till the mid 1970s within the Physics Department used in Melbourne. John Rouse and David Caro was involved in the construction.Black and white photo of cyclotron (nuclear physics accelerator): Dee & beam exit. Image shows Ron Gray at work. Sticky typed labels on back from top and left to right: “MAIN MAGNET WATER HEAT EXCHANGE, VIEW OF DEE & BEAM EXIT, COIL CANS” Handwritten in pen in bottom right hand corner: “Ron Gray” -
Royal Melbourne Yacht Squadron
L.A. Nangle Perpetual Trophy
In 1961, George Venables resigned after 38 years of faithful service to the Club. He spent the first 21 years as Head Steward, the remainder as Secretary, a position that in his latter years became Secretary/Manager. Prior to leaving, he presented to the Club the Quadrant once owned and used by his father when one of the Navigating Officers aboard H.M.V.S. Cerberus. This was to lay idle in as cupboard in the Office until one day seen by then Commodore Les Nangle, who decided to put it to good use. Following being mounted in a case, July 1969, it was allocated as a trophy by Commodore Les Nangle. Originally it was for a Distance event for 1st Division and One-Design Classes, with the first event season 1969-70, being from St Kilda to Mornington, won by Brian Morris skippering the Diamond Class yacht, Vulpine. In an endeavour to raise interest in Twilight events for both the racing and Club revenue, the trophy was re-allocated, December 1990, for a Combined Club and Classes, including Trailerable yachts, Mid-Week Summer Twilight Pursuit Series, held on consecutive Wednesday’s, commencing January 1991, of seven, later amended to nine heats without spinnakers, initially with trophies awarded after each heat. The best five results to count, contested in accordance with the VYC handicapping system. Trophy was first won Season 1971-1972, by Roy Duncan with his Tumlare, Marie, From 2007 onwards the contests were amended to allow for at least seven heats to be set in the race calendar with a minimum of 5 heats to be conducted to constitute a series. Seventy percent of results to count for the series scores when the number of heats exceeded ‘Five’.Brass quadrant upon coastal chart, enclosed in a glass fronted wooden case. Silver winners inscription shields attached around edge of case.L. A. NANGLE PERPETUAL TROPHY THIS QUADRANT IS OF THE TYPE USED BY THE EARLY AUSTRALIAN NAVIGATORSl.a. nangle, perpetual, trophy -
Montmorency/Eltham RSL Sub Branch
Mess Tin WW1, 1916
Mess tins were used to prepare or heat food, but thay were also used as a container from which to eat or drink. The tins are lightweight and sturdy but they became hot very quickly when heated.Used by Australian military servicemen during WW1Two piece "D" shaped silver coloured metal mess tin and lid. Used by Australian military servicemen during WW1, it is believed to be based on a British design. Made of tin plated steel, this mess tin has a wire rod carrying handle and rectangular metal wire clips for a shoulder strap, attached to the top section of the mess tin by metal rivets and straps. There is a metal wire rod folding handle mounted on the inside of the removable lid section. The mess tin has a folded seam on the bottom edge and along the left hand side. A wire rod is mounted around the top section of the mess tin as a base for the removable lid. The lid has a folded metal seam on the top edge and along the left hand side. The bottom edge of the lid is folded around a metal wire rod.A. SIMPSON & SON LTD 1916 ADELAIDEmess tin, ww1, australia, military, metal, two piece -
Federation University Historical Collection
Ethnographic, Advanced Stage Points and Scrapers
Silcrete can create sharp flakes and has been an important material for stone tool making in Australia. Silcrete was commonly used and widespread. Heat treatment of silcrete made the rock easier to fashion into flakes.Stone points and scrapers at an advanced stage, some just need sharpening. Collection includes rocks of silcrete, quartz, and quartzite.aboriginal, tools, stone tools, stone, flakes, points, scraper, quartz, flake tools, quartzite, silcrete, flaking, archaeology -
Shepparton RSL Sub Branch
Grenade, World War Two period
WW2 Mills Bomb (Hand Grenade M36.WW2 Hand Grenade used by Australia and Commonwealth Countries.Segmented Cast Iron body with lever (now softened) and with Safety Pin and Ring. Firing Pin in position with heat softened firing pin spring. Non regulation filler screw fitted. The Grenade has been totally burnt out, there is no Base Plug and no Firing Pin/Fuse Holder assembly.The body is marked R B D which stands for R.B.Davies the lever is marked the same. -
Flagstaff Hill Maritime Museum and Village
Iron
Charcoal Box iron, self heating family charcoal iron. Hinged top with wooden handle and grate inside. Has hand heat shield Also metal protecting plate for hand. Manufactured by C. H. Crane, Wolverhampton, England H22.5 x W 12 x L 24 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Whitehorse Historical Society Inc.
Functional object - Iron
Small travelling iron with stand. Also known as a 'Goffering' iron or 'Sad Iron'. The iron is in three parts - a base plate on which to place the hot iron - the top which consists of a handle, skirt, and locking device for the centre of the iron which placed on a fuel stove to heat. The core of this iron is asbestos.Patented - May 20 1900|Asbestosdomestic items, irons, personal effects, travel goods -
Federation University Historical Collection
Ethnographic, Partly Worked Aboriginal Tool Blanks
Silcrete and chert can create sharp flakes and have been important materials for stone tool making in Australia. Silcrete was commonly used and widespread. Heat treatment of silcrete made the rock easier to fashion into flakes.Partly worked, incomplete Aboriginal rock blanks. The collection includes rocks of silcrete, quartz, and chert. 8969.26 is quartz chert. 8969.37 is a flint stone with a vein of quartz. The dark brown rock is silcrete with more iron than others (possibly 8969.41). 8969.45 is Quartz. aboriginal, tool, blank, rock, scraper, aborigines, quartz, silcrete, chert, stone tools, quartzite, flaking, flake tools, archaeology -
Vision Australia
Sign - Image, Wash Your Hands
These signs were printed and placed on to chip board for display in the kitchen area (as shown by the screw marks in the top corners). Brown marks and heat damage were most likely caused by their location in the kitchen at Ormond Hall.2 digital images of Department of Health Regulation 85 around cleanlinesssignage, ormond hall, royal victorian institute for the blind -
The Ed Muirhead Physics Museum
Photograph, Cyclotron accelerator
Builit in 1950s and used till the mid 1970s within the Physics Department used in Melbourne. John Rouse and David Caro was involved in the construction.Black and white photo of cyclotron (nuclear physics accelerator): H.V. Power supplies & acceessories. Sticky typed labels on back from top and left to right: “4KV DRIVER POWER SUPPLY, 14KV RECTIFIER SET, 14KV CHOKE, OIL PUMP & HEAT EXCHANGER” Handwritten in pencil on top left hand corner: “6” -
Orbost & District Historical Society
foot warmer
This container could be filled with hot water and put on the floor of a train so that passengers could warm their feet by placing their feet near the container. A blanket could be put over the warmer to contain the heat. This foot warmer was used on trains. A galvanised iron container with a screwable stopper at the top and metal handles on both ends. foot-warmer metal-foot-warmer -
Flagstaff Hill Maritime Museum and Village
Functional object - Spirit burner, early 1900's
This spirit burner was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Spirit or alcohol burner, round squat shape, clear glass base and bulbous top with cotton wick inside; wick has metal holder. Top sits on base, to snuff flame. Suitable for liquid fuel such as methylated spirits; heat from flame is used to sterilize surgical instruments (W.R. Angus Collection)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spirit burner, alcohol burner, glass spirit burner, metical equipment, dr w r angus, medical equipment, surgical instrument, dr ryan, nhill base hospital, flying doctor, medical history, medical treatment, mira hospital -
Bendigo Historical Society Inc.
Ephemera - BENDIGO HOTEL COLLECTION: BELMONT HOTEL GAME CARDS
Fold up game card. On the cover ''With the compliments of A. Jackson's Belmont Hotel, Kennington, Bendigo'' Inside on the left column for the name of eight players on the right a blank square. How to play: each player selects a number, apply heat to back of square marked, result and winning number will appear. (two copies of the card)bendigo, hotel, belmont hotel -
The Ed Muirhead Physics Museum
Mechanical equivalent of heat(J): remnant of torque mechanism
From label: Remnants of the “J” Apparatus beam balance for the measurement of the mechanical equivalent of heat. The solid object is the rotating magnet the construction of which is illustrated on the cover of \\\"A man Ahead of his Times\\\". Made in the Nat. Phil. Workshop for J experiment.Three components of “J” Calorimeter made of metal and covered in green enamel. One small weight from 33.3 has become detached from string. -
Greensborough Historical Society
Book - Digital Image, Sunbeam Corporation, Sunbeam Frypan instruction manual, 1959_
Covers from "Sunbeam Frypan instruction manual". An example of 1950s advertising through cooking and homemaker books. In this book, instructions and recipes are given for using a Sunbeam controlled heat electric frypan. The back cover shows examples of other Sunbeam appliances.An example of mid 20th century advertising through 'how-to' books.Digital copy of front and back covers of a book.historic advertisements, recipes, electric appliances, electric frypans, sunbeam appliances -
Hume City Civic Collection
Domestic object - Flat Iron
These small heavy flat irons were used to iron clothes prior to electric irons being invented. They were heated on a wood fire stove top and used quickly before they lost heat to iron items of clothing and other small items. These irons were very heavy so that they retained the heat when heated by a wood fire stove top prior to electricity being connected to houses. Flat irons were used in the 1800's and in the early 1900's.Heavy black small flat iron with handle on top. Iron tapers from flat wide base to rounded point. It has a round logo on front under the handle.Unreadable round possibly manufacturers logo.social history, irons, ironing, domestic items, 1800's -
Federation University Historical Collection
Document - Document - Syllabus, Education Department: Technical Schools Syllabus, 1921
A syllabus for each subject taught in Technical Schools that was provided by the Education Department of Victoria. .1: Syllabus for Heat Engines - side 1, Grade 1; side 2, Grade 2 .2: Syllabus for Refrigeration - Grade 1 and Grade 2 on side 1. .3: Syllabus for Farm Irrigation and Irrigation Engineering - side one, Farm Irrigation; side 2, Irrigation Engineering. .4: Mechanics and Mechanics applied to Mining - 4 pages covering Mechanics (Applied) Grade 1, Grade 2, Mechanics (Applied) Structures, Grade 3, Mechanics (Applied) Machines, Grade 3; Mechanics Applied to Mining and Theoretical Mechanics .5: Syllabus for Mechanics and Heat - First Grade Mechanics students will be required to know the general principles and formulae of the science, apparatus used method of using and to verify formulae experimentally. Second Grade course includes all subjects for Grade 1 plus Newton's proof of the parallelogram of forces, rotation round fixed axis, laws of rotary motion of a body, resistance, harmonic motion, friction,impulsive forces, barometer corrections and Heat and thermodynamics. Third Grade students, an intimate knowledge of the courses for first and second grades plus remaining portions of thermodynamics. A special course for Evening Students in Mechanics and Heat outlined. .6: Syllabus for Electricity - covers the requirements for First Grade, Second Grade and Grade 3. Areas covered are Magnets and Magnetism, Electroscopes and Electrification, Electronic Fields, Voltaic Electricity, Measurement of Current, Electromagnetism, Amperemeters, Resistance, Electrical Technology,A5 size pages, typed. Some are doubled sided.education department victoria, technical schools, syllabus, 1921, heat engines, refrigeration, farm irrigation, irrigation engineering, mechanic, mechanics applied to mining, mechanics and heat, electricity -
Bendigo Historical Society Inc.
Book - BILL ASHMAN COLLECTION: CORRESPONDENCE
Technical Bulletin from A. K. Lever & Co. Pty. Ltd., manufacturers of 'Nulon' Nylon Bearings & Bushes. Headings include: General Characteristics, Co-efficients of friction for Nylon on steel, Chemical Resistance, Water Absorption, Condition of material, General, Lubrication, Load and Speed, Heat Conductivity - Wall thickness, Thermal Expansion, Fitting and Wear - Running in,sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, a k lever & co pty ltd, nulon nylon bearings & bushes technical bulletin, mcpherson's limited -
Kiewa Valley Historical Society
Iron - Kerosene
Kerosene irons were used c1930 - 1950 especially where electricity wasn't available. Shelite was another fuel that could be used instead of kerosene. The advantage of the kerosene iron was that it didn't require a stove to be lit (especially in summer) to heat the iron and it didn't require electricity.Residents in the Kiewa Valley used kerosene irons.This black iron is made of cast iron with a steel base and a black wooden handle. This Comfort iron has a ball shaped container with a screw-on lid to hold the fuel (kerosene or Shelite). At the bottom of this ball is a pipe going down then meeting another pipe at right angles to it leading into the iron. At the pipe junction there is a handle on a screw to limit the amount of fuel. The Kerosene would flow through this pipe. There is a filler plug air stem on top. This is a self-heating iron.Comfort iron / Self Heating Comfort Iron MFD by / National Stamping and Electric Works / made in U.S.A. Chicago iron, domestic, laundry, pressing clothes, household, kerosene, shelite -
Warrnambool and District Historical Society Inc.
Domestic object - Food Cover, c. 1930
This is a food cover, most commonly used in homes in the days before refrigeration and plastic containers. It usually contained food, mainly meat, to protect it from flies, heat or draught while allowing the air to circulate around it and it could be hung in sheds, kitchens, cellars etc. This food cover is retained as a memento of domestic objects used in the past and will be useful for display purposes.This is a food cover made of metal with a circular base and decorative sides, finely pierced to create a mesh pattern. It has a fluted and patterned top with a ring handle. It is rusted.vintage kitchen items, warrnambool & district historical society collection -
Royal Brighton Yacht Club
half model, Mornington Perpetual Trophy
Mornington Perpetual Trophy Donor: The Mornington Yacht Club 1985 Deed of Gift: No Donated to commemorate the Jubilee class 50th anniversary and is awarded to the winner of the last heat of the Victorian Championship for the J. A. Linacre Memorial Trophy. First Winner: Killara J, R. A. Chisholm 1986 jubilees, mornington -
Flagstaff Hill Maritime Museum and Village
Equipment - Boiler, T & F Johnson, boilermakers, late 19th century
A steam boiler like this one, made in the late 18th century, is often called a colonial boiler. Steam boilers were used in factories throughout Australia, mounted over similar designs of brick furnaces. This boiler is a fire tube type, in which the heat from the fire travels through the tubes and water circulates around them. Another kind of boiler is a water tube boiler, in which the water is inside the tubes and the heat of the combustion surrounds the tubes. The boiler in our collection burned wood as fuel but others of this design could also burn coal, coke, gas and liquid fuels. The boiler was made by T & F Johnson, boilermakers. In 1922 their factory was located at Coventry Street, South Melbourne. They were still advertising their 'Colonial, multi, vertical boilers, all sizes' at the same address in 1934. The connected pressure gauge, made in London by Dewrance, measures 0 to 400 pounds per square inch. John Dewrance is renowned as a pioneer of the steam locomotive in the early 19th century. He founded John Dewrance & Co. in South London in 1844. His son Sir John Dewrance took over in 1879. In 1939 the company became a subsidiary of Babcock & Wilcox, and was eventually owned by Emerson. How the boiler works: - A boiler is about two-thirds filled with water and heat is applied, in this case in the form of burning wood. The heat is transferred through the metal of the boiler to the water. When the water boils the steam rises to the top, and as it escapes from the boiler the steam pressure builds up in the steam space to later be released to do work; drive machinery such as ship and train engines, turbines, presses, wheels, and driving belts to operate looms and saws. The heat associated with the boiler can be used for preserving food, sterilising, factory manufacturing processes, and steaming wood for shipbuildin. Every boiler has several components fitted for safe operation: - - Safety valves - Gauge glass - Pressure gauge - Main steam stop valve - Water check valve - Blowdown valve - Manhole doorThe boiler is a significant item that gives us a snapshot of early Melbourne's industrial history. It is an example of the technological advancement during the Industrial Revolution where steam-driven machinery and motors could perform tasks more efficiently than manual labour. The makers were one of many boilermaker businesses in Melbourne during the early late-19th andearly 20th centuries. The maritime trade and skills of boilermaking are still learned and applied today. The Dewrance steam pressure gauge connected to the boiler was made by the London firms foundered by John Dewrance. He was renowned for developing the steam locomotive in the early 19th century.Boiler; a horizontal cylindrical underfired steam boiler. It is a multi-tubular design and is timber plank-clad, with brass fittings and pressure gauges. The boiler has an iron door at one end with a metal chimney above it. It is installed over a brick-enclosed solid fuel furnace. Two large, wood-mounted pressure gauges are connected to the boiler and have inscriptions. An inscription is on a red, cast iron plaque above the boiler door. The boiler's maker is T & F Johnson, South Melbourne. One of the pressure gauges was made by Dewrance, London..Maker's plate: "T & F JOHNSON / BOILERMAKERS / SOUTH MELBOURNE" Pressure gauge: "POUNDS PRESSURE / PER [square] INCH / DEWRANCE LONDON"flagstaff hill, warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, boiler, multi tube boiler, steam boiler, steam technology, underfired boiler, horizontal boiler, timber clad boiler, steam power, industrialisation, boilermakers, south melbourne, dewrance, john dewrance, pressure gauge, dewrance pressure gauge, t & f johnson, london, steam engine, steam locomotive, pounds per square inch, 19th century, steam machine