Colin 'Steak' Shapter was born in Queenscliff in 1913 and fished from 1927 to 1953 on a 20 foot clinker boat 'JWC'Framed pencil drawing of prominent Queenscliff fisherman Colin 'Steak' Shapter. One of a series of 10 drawings entitled 'The Old Salts'queenscliff, fishermen, jwc

Ian 'Sam' Culliver was a fisherman in Queenscliffe from 1930 to 1992 using a 26 foot Couta boat called 'Phyllis'One of a series of 10 pencil drawings entitles 'The Old Salts' of prominent Queenscliffe fishermen Framed pencil drawing of prominent Queenscliff fisherman Ian 'Sam' Culliver signed by artist Dr Mike Birrell 1996. One of a series of 10 drawings entitled 'The Old Salts'dr mike birell, ian 'sam' culliver, phyllis

Ron 'Bluey' Welch was a fisherman in Queenscliffe from 1938 to 1987 using a 24 foot Couta boat called 'Claire Sans'One of a series of 10 pencil drawings entitles 'The Old Salts' of prominent Queenscliffe fishermen Framed pencil drawing of prominent Queenscliff fisherman Ron 'Bluey' Welch signed by artist Dr Mike Birrell 1996. One of a series of 10 drawings entitled 'The Old Salts'dr mike birrell, ron 'bluey' welch, 'claire sans

'Young' Les Wright was a fisherman in Queenscliffe from 1945 to 1991 using a 36 foot flush-deck well boat called 'Sea Hunter'One of a series of 10 pencil drawings entitles 'The Old Salts' of prominent Queenscliffe fishermen Framed pencil drawing of prominent Queenscliff fisherman 'Young' Les Wright signed by artist Dr Mike Birrell 1996. One of a series of 10 drawings entitled 'The Old Salts'dr mike birrell, 'young' les wright, 'sea hunter'

Lewis Ferrier was a fisherman in Queenscliffe from 1938 to 2008 using a 26 foot Couta boat called 'Rosebud'One of a series of 10 pencil drawings entitles 'The Old Salts' of prominent Queenscliffe fishermen Framed pencil drawing of prominent Queenscliff fisherman Lewis Ferrier signed by artist Dr Mike Birrell 1996. One of a series of 9 drawings entitled 'The Old Salts'dr mike birrell, lewis ferrier, 'rosebud'

Adelaide Steamship Co. MV 'Manunda' built Glasgow 1927, commenced coastal passenger service in Australia 1929, converted to 2/1 Australian Hospital Ship (AHS) in 1940 for service to Middle East, New Guinea and New Zealand. Returned to coastal trade in 1948, sold to Japan 1956, broken up in 1957. 9 drawer timber desk with brass drawer pull handles. Several stamps on the inside of top middle draw - 'Radio Maintenance Store, Transmitting Station Essendon' and 'Paul.J.Barton, 33 Bellbird Cres, Vermont 3133''Manunda' stamped on back of deskship, furniture, manunda, doctor'sdesk, desk, steamship, ahs

A traditional term in the British Navy meaning to serve out an additional tot of grog to a ship's crew. The main brace itself was a purchase attached to the main lower yard of a square-rigged ship to brace the yard round to the wind. However, it probably has little to do with the saying beyond the fact that hauling on the main brace called for a maximum effort by the crew. In the days of sail the main brace was spliced (in terms of drink) in very bad weather or after a period of severe exertion by the crew, more as a pick-me-up than for any other purpose. But with the introduction of steam propulsion, with machines to take most of the harder labour out of seagoing, the main brace was spliced only on occasions of celebration or, occasionally, after battle. Now that rum is no longer issued aboard ship, splicing the main brace is a thing of the past.A small tap used to empty contents from a barrel containing rum or whisky aboard ships.Brass spigot or tap used for inserting into a barrel containing liquid such as rum, whisky or vinegar etctap, spigot, barrel, alcohol, liquid storage

An aneroid barometer is an instrument used for measuring air pressure as a method that does not involve liquid. Invented in 1844 by French scientist Lucien Vidi, the aneroid barometer uses a small, flexible metal box called an aneroid cell (capsule), which is made from an alloy of beryllium and copper. The evacuated capsule (or usually several capsules, stacked to add up their movements) is prevented from collapsing by a strong spring. Small changes in external air pressure cause the cell to expand or contract. This expansion and contraction drives mechanical levers such that the tiny movements of the capsule are amplified and displayed on the face of the aneroid barometer. Many models include a manually set needle which is used to mark the current measurement so a change can be seen. This type of barometer is common in homes and in recreational boats. It is also used in meteorology, mostly in barographs and as a pressure instrument in radiosondes.5 inch Aneroid barometer on wooden basebarometer, aneroid

An inclinometer measures the angle of inclination of a vessel or aircraft to the horizontalTimber and brass inclinometer from the M.V. Australian Explorer. Triangular timber shape with curved base. Brass measuring plate with measurements from 0-40 degrees on each side. Brass pointer indicates angle of inclination of vessel. 'EIWA' label on front. '87-156' inscribed in pen on back and underside. navigational instruments, australian explorer

Around the 60s and 70s the most popular catamaran sailing on Port Phillip was the Cunningham designed Quickcat. Popular marine ply catamarans mostly owner built and used extensively in Port PhillipQuick Cat 16 foot, timber catamaran with trailer, beach buggy and construction blueprint Y Wood Ya, RGYCquick cat, catamaran, marine ply cats

Returning from Manila in 1856 with a cargo of rice, sugar and rope. Mountain Maid was wrecked after colliding with the Victorian steamer, SS Queen. No lives were lost but the ship sank quickly and the crew was forced to swim for their lives. The pilot onboard Mountain Maid was dismissed from the Pilot service, as he'd already run two other ships aground before changing direction and causing the collision with SS Queen (Lomdahl 1992:Mountain Maid). Pintle and Gudgeon Type Ruddermountain maid, shipwrecks, rudder

This drum winch was used by the Pilot Service to haul dinghies into the work shed in Tobin Drive Queenscliff. It was situated on the slip way on the fishermen's pier.This drum winch was used by the Pilot Service when it was situated on the slip way on the fishermen's pier in Queenscliff.Drum winch used by the Port Phillip Pilotswinch, port phillip sea pilots

Unknown history but potentially off wrecked yachtPortable compass in metal case with glass front and spirit light compartment on left sidecompass, navigation

The MV Duntroon was a 10,346 ton passenger liner built for the Melbourne Steam Ship Co. by Swan, Hunter & Wigham Richardson's yard, Newcastle-upon-Tyne, in 1935. One of the last purpose-built passenger & general cargo ships for the Australian coastal trade, the Duntroon was also known for its role as a troopship (1942-1949) and for the tragic incident on 20 November 1940 when she hit and sank the small auxiliary minesweeper HMAS Goorangai off Queenscliff with the loss of all 24 of Goorangai's crew. This was the first RAN ship to be lost during the Second World War.Crockery; 7 pieces from the Melbourne Steamship Co. off the MV Duntroon; 2 tea cups with saucers, 2 side plates, 1 small milk jug, floral border pattern Crest on front: Melbourne Steamship Co. Ltd. On base: C McD Mann and Co. Ltd. Hanley Staff, 101 Leadenhall St. London. Made in Englandmv duntroon, goorangai, melbourne steamship co ltd

Kent was used to carry migrants from the UK at the time of the Victorian Gold Rush Model of Sailing Ship 'Kent' - British Registry kent, clipper ships, malcolm pascoe's family, immigration, gold rush

Electric Light bulb used in Point Lonsdale Lighthouse in the 1960sElectric Light globe used in the point Lonsdale Lighthouse Globe, Electric 240V, 500W, E40240V, 500Watt. Made in Germany. E40point lonsdale lighthouse, electric light, light bulb

The MV Duntroon is of historical and social interest to Queenscliffe primarily due to its involvement in the collision and loss of all hands of HMAS Goorangai near the Rip. It also continued to work as an interstate sea liner up to the 1960s. Cups, plates and saucers with the crest of the Melbourne Steamship Co and an art deco edge patternCrest: Melbourne Steamship Co. Base: C Mc D Mann and Co. Ltd. Hanley Staffs and 101 Leadenhall St. London. Made in Englandmv duntroon, hmas goorangai, crockery, melbourne steamship co ltd

Timber notice board used at the booking office for the SS Time to indicate sailing informationSailing Notice Board made of timberSS Time; Will Sail; At; For ss time, corsair rock, notice board

Extendable telescope with painted timber look on outer casing. telescope, navigational aides

Roller bearing parallel ruler in timber case.navigation, drafting, instrument

Popular beach side postcards of years gone by depicting scenes of QueenscliffeColour postcard with flap showing photos in and around Queenscliff It's "appealing" at Queenscliffqueenscliff, tourism, postcards

The Australian pilot vessel and steam yacht Alvina had a long and varied career. It was built in the UK as a private yacht, 1891 and in 1903 came to Australia to commence in the pilot service at Port Phillip Heads. This model of the pilot ship is held by the nearby Queenscliff Maritime Museum in Victoria. In 1923 the larger Akuna took over from the Alvina, which then served as an excursion steamer and ferry in Westernport Bay for another 10 years when in 1933 it was replaced by an ex-Sydney vehicular ferry displaced by the new Harbour Bridge. Alvina was not scrapped until 1961. DSC_0046In 1901 the pilots took delivery of their first steam-powered pilot cutter, “Victoria”, 46 metres in length, built at Williamstown. “Victoria” was followed by “Alvina”, “Akuna”, “Akuna II” and in 1953, “Wyuna”, a twin-screw diesel electric pilot cutter 63 metres in length. “Wyuna” served until November 1979 and was then sold to the new Australian Maritime College at Launceston, Tasmania for use as a training ship.Model of the Pilot vessel 'Alvina in glass casepilot service, pilot vessel 'alvina', mr a g woodley

A Couta boat is a type of sailing boat originally designed and built in Victoria, Australia, around Sorrento, Queenscliff and along Victoria's west coast as far west as Portland. It was originally used as a traditional fishing boat from around 1870 until the 1930s, although it survived as a commercial fishing vessel until the 1950s. From the 1970s onwards a community of enthusiasts started restoring old couta boats to use recreationally.The Couta Boat has been associated with the fishermen of Queenscliff from the first quarter of the 20th Century, and still is of significance due to the popularity of this boat as a leisure sailing vessel.2 Reproduced photographs of couta boat fishing fleet under full sail in Queenscliffcouta, couta boat, sailing, fishing, port phillip, queenscliff

Timber and glass skylight from the 'SS Shandon'.skylight, ships fittings, 'ss shandon'

Half model of a clinker bay boat with white superstructure and green hullASTURIASasturias, half model boat

Half model of an 1890 couta boat made to plans of 'Ariel'1890's Couta Boat Victoria Aust.couta boat, 'ariel', half model

This nameless three-masted sailing ship half model is typical of a piece produced by a first year apprentice. Nameless three-masted sailing ship half model, typical first year apprentice piece. Model acquired damaged and incomplete. Repaired and completed by Arthur Woodley Crib Point September - October 2008.boat building, boat half model