As the Yarra became unsuitable as a source of water, several attempts were made to find alternative sources for the growing population of Melbourne. It was not until 1891 that the efforts to sewer Melbourne came to fruition with the setting up of the Melbourne Metropolitan Board of Works (MMBW), now known as Melbourne Water. From 1891 until 1992, it was the responsibility of the MMBW to safeguard public health by providing a sewerage system and a safe water supply system. In 1992, The MMBW merged with a number of smaller urban water authorities to form Melbourne Water.This first aid kit is of historical significance for its association with the former Melbourne and Metropolitan Board of Works (MMBW). The kit is relatively intact and a rare surviving object of standard Board issued equipment. The kit is significant for its representativeness of the theme of Safety that continues to resonate strongly within Melbourne Water today. First Aid Kit (plastic lunch box)MMBW 1339 (burnt into plastic) Board of Works Decalmelbourne metropolitan board of works, melbourne water, first aid kit, mmbw, safety, water, sewerage

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]Palmer's diathermy forceps. It has two pronds for grasping that retracts with a screw mechanism. Purchased by Geoff Bishop as an additional part of original laparoscopy set, also included in this accession 1999005.laparoscopy, tubal ligation, infertility investigation

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This Spackman's cannula was used by Dr Geoff Bishop during gynaecological laparscopioc surgery.He used this decice as a uterine elevator. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: ANAX.laparoscopy, tubal ligation, infertility investigation

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This cannula has two points for tubal attachments at one end. At yhe other end, a bell cap with a nossel.This was used by Dr Geoff Bishop during gynaecological laparscopioc surgery. This instrument is commonly used for suction. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: PRECIOUS.laparoscopy, tubal ligation, infertility investigation

Contains mossie headnet and mittens, tablets, safety pin, fire starting kit.0545 - c50 - 9500survival equipment, army

Mk. 3 Martin Baker ejection seat. Canberra bomber pilot reat. Consists of oxygen hose, safety harness, leg restraints, face blind, seat harness, head cushion, parachute back support padejection seat, canberra bomber

Mechanical resuscitation devices, such as the Pulmotor and Lungmotor, were popular in the early part of the twentieth century. Their use waned in the 1920s as significant bodies like the British Medical Research Council and American Red Cross refused to endorse them. The most popular of the resuscitators to emerge in the 1930s was the E&J (Ericson and Johnson) resuscitator. The device was soon widely available, vigorously promoted with support from many medical practitioners. They were soon to be found in hospitals, emergency services like the ambulance and fire brigade, and voluntary life-saving organisations. In Australia, Norman James, director of anaesthesia at the Royal Melbourne Hospital, developed an interest in equipment for ambulances and the resuscitation of drowning victims. Little in the way of practical, portable equipment was available to either the ambulances or the voluntary life-saving organisations, such as Surf Life Saving Australia (SLSA); American resuscitators, like the E&J, were expensive and bulky to import. James designed a simple portable resuscitation device for local use after being approached by Jack Conabere, secretary of the Elwood Life Saving Club (ELSC). The resulting Royal Melbourne Hospital resuscitator, or the R.M. resuscitator as it was marketed, was a simpler, manual version of those available overseas. It was gas driven with a plunger, marked “Press”, and a safety valve. The small working unit attached directly to the facemask. Once the patient was positioned facedown and the airway cleared of debris, the mask was placed firmly over the face. The plunger allowed gas to flow and lung inflation; releasing the plunger allowed expiration. This simple resuscitator was marketed by Commonwealth Industrial Gases (CIG) and became very popular in Australia with volunteer and professional rescue organisations. It represents one of the many innovations in resuscitation equipment that resulted from cooperation between volunteer life savers and medical practitioners. Norman James worked closely with Jack Conabere and the Government Pathologist to develop the equipment. ELSC was the first life saving club to use the resuscitator on the beach. While conducting an early training exercise on 23 December 1951, they used it to successfully resuscitate a man who had drowned after capsizing his home made yacht. The R.M. resuscitator was also used in more inventive ways. At Fairfield Hospital in Melbourne, a group of physiotherapists and doctors did some innovative work with polio patients, teaching them glossopharyngeal (or “frog”) breathing, as a means of becoming less dependent on ventilators. In 1981, the Australian Standards Association stated that the RM head failed to meet its revised standards and it was withdrawn from the market. Red leather suitcase with black leather trim with metal studs. There are clip locks for locking the suitcase in the closed position. The suitcase contains equipment for oxygen resuscitation. There is a space allocated for two oxygen cylinders, however there are no cylinders present.Embossed into metal plaque: The C.I.G. / Oxy-viva / PORTABLE UNIVERSAL OXYGEN RESUSCITATORresuscitation, portable, surf life saving australia, royal melbourne hospital, rm resuscitator

Railway stretchers were carried in all Guards Vans on Victorian Railway trains, for use when an accident occurred. Regular training and annual events in first aid competitions ensured most staff were well versed in the requirements of an emergency. Historic - Victorian Railways - First aid stretcher Timber stretcher, two beams encased in canvas with extendable metal straps.VICTORIAN RAILWAYS 513 / SUBURBAN TRAIN FLINDERS STREETrailway stretcher, victorian railways, puffing billy, first aid stretcher, suburban trains, flinders street, guards van, health and safety

Used to support bucket on a windlass rope.mining, equipment, trades, blacksmithing

Shell dressings were carried by individual soldiers, intended to be used as a first dressing in event of wounding or injury. Each cloth pack contains dressings comprised of a gauze pad stitched to a bandage and a safety pin. The field dressing was often the first line of treatment and was intended to be applied by the wounded man himself or other soldiers.This dressing is significant as a representative object carried by every soldier in WWII.Bandage covered in light brown cotton casing. Front side has inscription and instructions for use.Commonwealth of Australia / Shell Dressing / (directions for use)dressing, bandage, australia, johnson & johnson

Used from 1939 /. 1945.First Field Dressing in calico bag. Rectangle shape. Closed with safety pin.

Case believed to have been manufactured to hold ammunition for the Vietnam conflict.Brown metal box with yellow and white writing665 cart 9mm ball mk2z ctn mf 19-5-66 Australian government explosive Safety class 6

Steel box designed for carrying and storing ammunition. Painted Khaki Green in colour.Australian Government Explosive, Safety class 6. 665 Cart. 9MM BALL MK2Z CTN 4 - 4 - 67vietnam war, ammunition box, australian army

First aid container metal Drab olive green metal container with red cross and yellow writing, Containg first aid equipment 3 first field dressing, Electrolyte powder, Kaolin compound powder, 1 band aid, adhiesive plastic patch. 3 Pin, Safety, Brass, Nickel plated, 1/2 inch 00083.1openend field dressing 00083.2 first field dressing un opened 00083.3 first field dressing un opened 00083.4 kaolin compound powder 00083.5 plastic band aid 00083.6 electrolyte powder 00083.7 safety pins X3 6545-66-019-9802 First Aid Kit General purpose For MT (CES 6007)first aid kit, medical supplies, bandages, metal medical container

Mobile suction unit with power. Possibly used from the late 1970s and into the 1980s for mechanical suction control. Possibly used in non MICA rural ambulances. Maintenance sticker on object indicates that it was last serviced in 1997. This suggests that the equipment may have been in use to that date.Grey plastic case with handle containing suction equipmentCHEMTRONICS P/L SAFETY TESTED PERFORMANCE TESTEDsuction

This photograph is taken in the lady's home, and the Medical Student and Royal District Nursing Service (RDNS) Sister are supervising the lady walking with two 4 prong sticks.From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as Royal District Nursing Service (RDNS) from 1966, the rehabilitation of patients to ensure they were able to live independently in their own homes was at the forefront of care given by their Trained Nurses (Sisters). As well as teaching and supervising the use of equipment, their Sisters taught them safe transfer techniques. These techniques were also taught to family members to enable them to care for their loved ones. RDNS at first held workshops given by a contracted private Physiotherapist before employing their own Physiotherapist in 1975 who taught staff the correct techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. When required the Physiotherapist accompanied the Sister on her visit to the patient in their home.On the left of this black and white photograph is the rear view of a Medical Student who is standing side-on looking towards the right, and smiling at an elderly lady. He has short dark curly hair and is wearing a white hospital style coat, which has a stethoscope folded in the pocket, over grey trousers. His right hand is resting on top of the lady's right hand which is on the top of a metal 4 prong stick. The lady, who is wearing glasses and has short wavy grey hair, is standing holding the tops of the metal 4 prong sticks which are standing either side of her on the grey carpet. She is smiling at the doctor. She is wearing a black skirt and a black sleeveless jacket over a black and white patterned blouse, and is wearing black shoes with her left shoe raised with a deep sole and heel. To her right, standing side-on facing her, is a Royal District Nursing Service (RDNS) Sister who has her long dark hair drawn back. She is wearing a white short sleeve gown and her right hand is behind the lady; her left hand is on the lady's right hand on top of the 4 prong stick. In the left background is a vinyl style grey couch and on the right is a window with open Venetian blinds and open long dark curtains on either side. An air-conditioner sits in the lower section of the window.Barry Sutton Quote 25royal district nursing service, rdns, rdns rehabilitation

Specification document comprising printed cover, eight typewritten pages (black carbon copy) and two photo pages of a J.G. Brill Co. of Philadelphia PA, Birney Safety Car. Specification No. 100, revised 1/10/1919. On the printed cover, which has three holes for a clip on the left hand side, printed with the Birney Safety Car trade mark, the names of the J. G. Brill associated companies (American Car Company of St. Louis, G. C. Kuhlman Car Co. of Cleveland Ohio, and Wason Manufacturing Company of Springfield, Massachusetts). On the inside of the front cover and on the outer back cover is the Brill logo. On the inside of the back cover is a floor / seating plan of the Birney Safety Car, giving overall dimensions, location of equipment etc. Item secured with one brass clip in the top left hand corner. The eight typed pages details the specification of the construction of the tramcar, equipment details etc for a single truck, double end Birney Safety (tram) car. Gives dimensions of the tramcar, materials, construction methods, finishes, equipment, glass, etc. Also details additional items that could be ordered with the tramcar. First photo shows the Birney car without a trolley pole, lettered for the KC Rys. Co. The second photo shows an interior view of the tramcar. Scanned for COTMA Website - pdf version.trams, tramways, birney, j. c. brill co., tramcar specifications, tramcar construction

Book, titled "Door and Step Control", 192 pages printed on white art paper, with green inside covers and end covers, 12 sections, full bound, sewn into green Rexene outside covers with title and company logo in gold on front cover and publisher "National Pneumatic Company" on spine. Details equipment available for control of doors and steps using compressed air, manual methods, with photos of various types of railway and tramway vehicles, equipment and drawings. Has an index. Also details of sash (window) and garage door control systems. Has been stamped with the ESCo Company stamp in a number of places.trams, tramways, tramcar equipment, doors, safety

Book, titled "101 and 1 ways to Save Money with Portable Compressors", published by Ingersoll-Rand Co. London, 120 page book, within yellow covers, centre stapled. Published 1929. On front cover has an colour picture of a large work scene with a the construction of a suspension bridge in the background. Details equipment that is available and the possible uses it could be put to, with numerous photos. Has a list of equipment, index and on last page a list of officers and directors. Has been stamped on the top left hand corner with the ESCo Company stamp but overwritten in ink with a BTPS catalogue number and information. Stamped dated 23 Feb. 1934.On front cover and page 1, hand written in black ink "Ballarat Tramway Preservation Society Catalogue No. 18".trams, tramways, trackwork, doors, safety, compressors, esco

Four issues of "MMTB News" - The Magazine of the Melbourne and Metropolitan Tramways Board. Two copies of each issue. Second copy added 31/8/2004. 2718.1 - Vol. 1, No. 1 - 16 pages, August 1964, with Bus No. 701 on the front cover. Has articles on; New Buses, Traffic Noise and Trams, Preston Workshops. Cover an cream colour gloss paper, rest of magazine - white gloss paper. 2718.2 - Vol. 1, No. 2 - 16 pages, September 1964, with a photo of a "resilient crossing" on the front cover. Has articles on; MMTB Band, Les Organ - 40 years of service, Tramways Benefit Society, Safety, tram poles, Preston workshops. Cover an cream colour gloss paper, rest of magazine - white gloss paper. 2718.3 - Vol. 1, No. 3 - 16 pages, October 1964, with a photo of part of the training room at Hawthorn depot on the front cover. Has articles on; equipment testing, memories of the cable days, sporting news. Cover an cream colour gloss paper, rest of magazine - white gloss paper. 2718.4 - Vol. 1, No. 4 - 20 pages, November - December 1964, with a colour photo of the new Supervisory control room at Carlton on the front cover. Has articles on; chairman's message, tramway band, Carlton Control - Supervisory Centre, safe electrical working, Christmas celebrations, the old power control centre, a obituary for H. H. Bell, Remembrance day. Printed on gloss white paper. Each issue has stamped on the front cover "The Australian Railway Historical Society (S.A. Branch).trams, tramways, mmtb, carlton control, preston workshops, hawthorn depot, tramway band

Yields information about the equipment offered to Ballarat at the time of the determining what type of signals to put in to improve safety on the system, following the take over by the SEC of the tramways. Gives details about other tramway equipment available on the market place.A set of documents under cover of a Forest City letter dated 29/7/1936 to the General Manager Ballarat, typed in black and red ink. Has a date received stamp of 20 August 1936. Contains the following items. 4911.1 - Letter from "The Forest City Electric Co. Limited" to ESCo re Point controllers, tramway signals and warning signs, dated 29/7/1936 - 2 pages 4911.2 - Collins Patent Automatic Point Turner - sheet 19 - 4 pages - sheet 19, two copies 4911.2a - ditto, sheet 18 QT - four pages 4911.3 - Electrically operated Point switches, overhead frogs and signals for tramcar depots. - four pages 4911.4 - Automatic Tramway Signals - five pages - sheet ATS1 4911.5 - Universal Insulator - Sheet 17 - 2 pages 4911.6 - Porcelain hangers - sheet 15/1 - 2 pages 4911.7 - Porcelain insulators for cap and cone suspensions - page 11, 1 page. 4911.8 - Motor Bus and Tramcar Stage and Fare Signs in Cast Aluminium - sheet MD2 - 1 page 4911.9 - Flashers and Spellers - Sheet F1 - 2 pages 4911.10 - Forest City Relays - 2 pages 4911.11 - Traffic light - 1 page, sheet 2A Note the letter the price of the non car counting signals is 20 pounds, including freight.On letter notes in margins and margin on page 2 against tramway signals, marked in red. On rear of page 2 is a pencil sketch.trams, tramways, signals, overhead, traffic lights, points

A first aid box, rectangular shaped metal box 180mmHx265mmWx215mm D, painted black, hinged lid with 2 hinges, metal carrying handle on top, and metal locking clasp on the front. Has a white sticker with first aid written in red on the lid, and a gold SECV transfer. On the front of the box, below the locking clasp are the numbers "2787" in a gold transfer. Inside of box is gloss white, there are four metal brackets to hold some kind of partition. In the lid a four brackets to hold some kind of implement, and four corner brackets (similar to photo mounts) to hold something. There is a "B" written in top left inside corner of the lid and next to that a rubber stamp imprint with the date "16 April 1970".First aid sticker on lid, SECV logo transfer on lid, Number 2787 in gold transfers on the front, "B" written inside lid, and date stamped "16 April 1970" left hand top corner, inside lid.trams, tramways, ballarat equipment, ballarat depot, first aid, safety, secv tramways

Example of aquatic safety at sea equipmentHand held aquatic emergency lightemergency light, safety at sea

Pains Wessex Mini Resqsat RB3 Personal 121.5 / 243 MHz EPIRBKinetic Technology Int Pty Ltdepirb, safety at sea

A battery operated emergency life buoy light4.88emergency light, safety at sea

Smoking equipment used by troopsVeryMatch box containing matches and "rolly" cigarettes (Top) Army Canteens Special Safety Matches made by Bryant & May. Average content 60. (Bottom) Save matches they're scarce. Made in Australia

White catalogue with blue printing for a sale on the 14th April, 1992 on account of Carlton and United Breweries Ltd, Abbotsford. For sale was pumps, valves, components and spares, New electrical fittings and parts, and general equipment and spares.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - carlton and united breweries ltd, malcolm mackinnon, j h curnow & son p/l, occupational health and safety act 1985, noel dyett, fred dyett, ian dyett, bolton bros p/l