This is a photo of the fence at the side of Delley's house. The construction method is interesting; two branches crossing each other were used as uprights and branches were layed across the forks thus created at the railing. This photo is enlarged from the left hand side of Record 531.The photo shows a rough fence built from untreated branches. It runs through low scrub and some low rock can be seen in the background behind it.buildings, houses

Solid metal base with decorative pattern. on-off switch is on base. Flexible metal upright leads from the base to the light globe socket (globe missing). This is covered by a metal half-sphere hood. Lamp has no electric cord attached.light, electric, desk lamp

Simple funnel type drenching was used by dunking base into saucepan containing drench. Funnel was then held upright and current dosage was retained in the funnel. With the drenchers finger covering the filling opening the pointed end of the funnel was then placed sufficiently far into the sheeps mouth to release dose into throat.Drench funnel.

This ink well could have been for household use but was more likely to have been used in an office or business. No information has been found on the name on the base – A.R. McLachlan. Ink wells began to be less used when fountain pens came into general use in the 1940s and went out of use completely when ballpoint pens became the popular writing instrument in the 1950s. This ink well is of interest as an example of the ink wells used early in the 20th century. It was probably used in an office or business building. This is a metal container with a circular base and an upright circular tube in which is inset a china ink well. The ink well is covered with a hinged metal lid and there are four round holes around the lid area. Both the lid and the base are etched with circular ridges. ‘A.R.McLachlan 1920’ office equipment, warrnambool, history of warrnambool

Vacuum cleaners have been part of the household for many years. Beginning as simple tools blowing the dust to the current sucking up the dust and being powered by electricity. From the shape of a barrel to those that stand upright, from being fitted onto a 'sled' to those with wheels and from heavy to light.Used by a resident in the Kiewa Valley Electrolux cannister steel vacuum with leather handle at the top, the electric socket (and cut power cord attached) at one end and the cloth covered hose at the other end. Two steel extension handles, hose and cord works. Parts with combination dusting and upholstery tool and hardwood floor dust mop and refrigerator crevice tool. The cannister sits on a 'sled' of two long rods on each side.Hand written on the cannister "1932 Model" "Electro / lux / Made in Sweden / Design Nr B156 Registered" on top On bottom "Ser 1234 No. 1456 / Volt Watt" ....(not legible)electrolux, vacuum cleaner 1932

The children at Bulla Primary School were celebrating Arbor Week in 1989 by improving the school garden. Three boys are digging a hole for a pole which will support a sign while their teacher Mr. Jolly is holding the post in an upright position. During that week the children worked on various parts of the school garden.A non-digital coloured photograph of three children digging in a garden with four others looking on and an adult supervising thew work.arbor week, mr. jolly, gardens, bulla primary school

As well as assistance in education and employment, agencies also provided support for adapting around the home. In this example, one woman is shown by a worker how to feel the temperature points in a pressure cooker. They stand in a kitchen, in front of an upright Davell cooker, next to a fridge and with steel utensils hanging on the wall behind the cooker.orientation and mobility, royal blind society of nsw

This copper nail, sometimes known as a ‘Dumpy Bolt’ or spike, was salvaged from the hull of the wreck of the “George III”. It dates back to at least 1810. It was found by an abalone diver on the south east coast of Tasmania. The nail would have been used to hold the layers of the ship’s keel frame and the planking together. The nail has been passed from the abalone diver to an interested business man on a trip to the south of Hobart, on again to the business man’s close friend who then donated it to Flagstaff Hill Maritime Village. The metal of nails such as this one, after being in the sea for a long time, become affected by the natural reaction of the sea water, causing it to degenerate and thin, and the stress from the force of the sea over the years alters its shape. Iron nails had been used on ships previously, but they quickly corroded in the salt; ships needed regular, costly and time-consuming maintenance to replace the iron nails. Towards the end of the 18th century the British Navy trialled the use of copper nails, finding them to be very successful. Merchant ships began to adopt this process in the early 19th century, although it made ship building very expensive and was more often used for ships such as the “George III” that sailed on long voyages. The three masted sailing ship “George III” was a convict transport ship built in Deptford, England, in 1810. On 14th December 1834 she left Woolwich, England, bound for Hobart Town, Van Diemen’s Land (Tasmania), under Captain William Hall Moxey. She was carrying 220 male convicts plus crew, guards and their families, totalling 294 persons (another 2 were during the voyage). Amongst the cargo were military stores including several copper drums of gun powder. On 27th January 1835 the “George III” was near the Equator, about half way into her journey. A fire broke out and the gun powder was in danger of explosion, threatening the whole ship. Two convicts braved the heat and smoke, entered the store and seized the gun powder drums, suffering burns for their efforts but saving a probable disaster. The fire destroyed some of the provisions and food was scarce. Many became ill with scurvy and some died during the journey. Nearing the end of their journey on 10th April 1835 the “George III” was headed through the D'Entrecasteaux Channel, south east Tasmania, between the mainland and Bruny Island. She was sailing in the moonlit night to hasten her arrival in port due to the great number of sick on board. She struck uncharted rocks, known only to the local whalers, between Actaeon Reef and Southport Lagoon and within hours began to break up. The ship’s boats were used to first rescue the women and children. Firearms were used to help quell the panic of the convicts below decks and some were killed by the shots. Many convicts, including the sick, were drowned. In all, 133 lives were lost including 5 of the crew, guards and their families. It was the third worst shipping disaster in Tasmanian waters. A monument in honour of the prisoners who perished in the “George III” has been erected, noting the date of the wreck as “Friday 10th April 1835.” (NOTE: there are a few differences between sources regarding dates of the shipwreck, some saying March and others April 1835. There are also differences in the figures of those on board and the number of lives lost.) The copper nail is significant as an example of sailing ship construction; fasteners used in the early 19th century on ships carrying convicts to Australia. The nail is also significant for its association with the ship “George III”. The “George III” is registered on the Australian National Shipwreck Database, ID 7195 as an Historic Shipwreck. She is the third worst shipwreck in Tasmanian waters. She is also associated with Early Australian History and the transportation of convicts to Australia. The incident of the fire on board and the bravery of the convicts in making the gun powder safe is an example of the social character of the people in early Tasmanian colonisation. Copper nail (also called a Dumpy bolt or spike) from the convict ship George III, wrecked in 1835. Nail is long, bent in an ‘L’ shape about 3/5ths along, tapering from both ends to the bend. Both ends are flat and do not taper to a point, nor have a thread. The shorter end has been polished, showing bright copper. There is pitting along the nail and virdigris is evident on the longer, unpolished end. The nail is displayed with the longer section resting on a wooden board between two ‘U’ shaped uprights, the shorter section upright. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, george iii, ship construction, ship nail, 1835 shipwreck, 19th century shipwreck, william moxey, d'entrecasteaux channel, convict transportation, copper nail, dumpy bolt, spike, keel nail

The Morse telegraph system had its beginnings in 1836 when Samuel Morse, Alfred Vail and Joseph Henry developed an early model of the system. There are a number of variations on the machine but the operating system is very similar in all and the language is a standardised international code which has been in operation since the 1860's. Morse code consists of five elements, dots, dashes, and gaps of one , three and seven units in length. It is still in use to this day and has been applied to other systems of communication such as amateur radio, mobile phones and communication systems for disabled people. This particular telegraph key possibly has post office or naval origins.Morse code was an important invention in world communication systems and this machine therefore has important social and research significance. It is useful as an interpretive item.This instrument sits on a black rectangular base of black bakelite. The mechanism ids held in place by three larger metal screws and two smaller ones on the upright section from the base.The movable part is metal with the attached handle a similar black material as the base.ADMY.PATT No 7681 KEY MORSE SERN PL 23780 Rocker Front contact. Lift @ turn on one of the screws on the bar.history of warrnambool, rocker telegraph, telegraph key, morse code

Three colour photographs: 1. Eltham Community Centre, Pitt Street, looking south 2. Eltham Community Centre, Pitt Street, looking south 3. Eltham Community Centre, Pitt Street, looking north; oregon uprights and mudbrick wallseltham, eltham community centre, buildings, construction

Three colour photographs: 1. Eltham Community Centre, Pitt Street, looking south 2. Eltham Community Centre, Pitt Street, looking south 3. Eltham Community Centre, Pitt Street, looking north; oregon uprights and mudbrick wallseltham, eltham community centre, buildings, construction

Three colour photographs: 1. Eltham Community Centre, Pitt Street, looking south 2. Eltham Community Centre, Pitt Street, looking south 3. Eltham Community Centre, Pitt Street, looking north; oregon uprights and mudbrick wallseltham, eltham community centre, buildings, construction

Colour photograph of farm shed, near Goornong. Shed is open shelter, has hand hewn uprights, corrugated iron roof. On back of photo:' 29.3.96 near Goornong, Vict, 14.30 hrs Shepparton Bendigo Road, by Roy J Mitchell, Bendigo.agriculture, farm, machinery

The photograph depicts a group of adults dressed in everyday clothing viewing a theatrical performance of 10 adult actors dressed in Victorian era costumes. The actors are performing on a make-shift stage that features upright logs as a background. Next to the stage is a group of workers laying bricks. The audience is seated on a grassy ground in front of the stage.Black and white rectangular reproduced photograph printed on matte photographic paper.Reverse: 5655 (in black pen)/ Beechworth (in blue pen)/entertainment album, beechworth, burke museum, performance, play, theatrical performance, performers

This chair has no maker's marks. The studs still on the seat, and the ventilation holes in the wooden seat, seem to indicate that the seat once had an upholstered cushion. Chair, wooden, with carved backrest and carved second horizontal back support.Seat has holes in a pattern, also studs around its perimiter. Legs and bracing ring are bentwood. Top of uprights for backrest have slight indentation design. Bemnants of dark colour stain, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, 19th or early 20th century chair, victorian furniture, kitchen furniture, dining furniture

Chair wooden curved arms and back rest. Hand grip in middle of back rest. Front legs, front spokes and spokes joining legs, and spokes connecting back rest to chair seat are decoratively shaped turned wood. Back upright piece missingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This Farrand & Votey pump organ was manufactured in Detroit USA c1885. It was lovingly restored by the late Peter Frost of Tallangatta. The organ was gifted to Peter in 2000 in a state of disrepair and was not working. Peter was born in Devon, England in 1930 and completed an apprenticeship in joinery and cabinetry, specialising in ornate church and cathedral furniture. He migrated to Australia in 1957 and became a highly regarded woodwork and building science teacher as well as a Building Inspector. He was also a passionate musician. On completion of the refurbishment Peter gave the organ to his daughter at Georges Creek. Farrand & Votey started out as the Detroit Organ Co. in 1881. They started building pipe organs in 1888. Votey did pioneering work on piano players, developing the famous Pianola. However, in 1897 the company split up, Farrand remaining with the reed organs as the Farrand Organ Co., and Votey taking the pipe organ and player piano business. The Farrand Organ Co. later brought out its own piano player, the Cecilian, but went bankrupt in 1915.This organ is an example of a craftsmanship from the late 19th century and has been fully refurbished by a skilled craftsmen from the Tallangatta district near Wodonga.An upright Farrand & Votey Pump Organ which was originally manufactured in Detroit, USA. It has been fully refurbished and is in working condition. Ron Fudge, a pump organ restorer in USA has dated it at c.1885 based on its serial number 14404 83.Above keyboard: "Farrand & Votey"farrand & votey, pump organ, organ restoration

Cooker is made of galvanised tin - hinged on both sides which can be set in two positions. Upright for mess tins and at 45 deg for mug or small containers. Base is designed to accommodate Hexamine tablet. When closed, the cooker is designed to carry a packet of Hexamine tablets.hexamine stove, mess tin

David Gordon Collection. Torpedo bottles, also known as Hamilton bottles, were used for aerated or carbonated water. They were oval shaped with a neck at one end, and were deliberately designed so that they could not be stored upright. Torpedo bottles were in common use from the 1840s to the 1870s, when they were superseded by the Codd Neck bottle.

Photograph - colour photograph of a large white upright memorial Cross surrounded by a number of smaller white memorial posts surrounded by a background of tropical vegetation. Frame - timber with decorative trim; brown stain with gold painted inner edge, glass fronted. Mount - cardboard, midgreen colour.Black print within the mount "LONG TAN CROSS - STH VIETNAM 1994". photograph, framed accessories, vietnam war, memorial

Certificate of the Poultry Industry Spitfire Appeal 1941. Dark blue & red colour printing on fawn background. Rectangular shape frame made of clear plastic cover on the front with metal back plate & upright support. Metal painted in fawn colour. Certificate presented to R Robbins.Handwritten in black ink: "R Robbins Esqe D Granter G Abberton"documents - certificates, military history - fundraising, passchendaele barracks trust

Chair donated to Melbourne City Mission (probably in 1941) by Mrs RODDA of Williamstown and used at the Port Branch (Jubilee Hall) until its closure . From the 1950s it was used by Sister Norma BARNETT, who kept it until her death. It then went to her 'sister' Janne RAY, and on her death to Janne's daughter Tracey RAY. She donated this plus related items to PMHPS in 2017 (refer 1506 and 3906).01 - solid wooden chair with peaked/pointed shaped back. Arms have rounded ends. Upright section of chair has two indented pieces and a small 4 leaf shape under the top of the point with a small brass plaque attached under it. .02 - Cushion - velourOn plaque "Presented to the Port Melbourne Branch of the Melbourne City Mission in loving memory of my husband N.P.Rodda. Died 28th November 1941 at Williamstown. A life lived for others. Lead kindly light.religion - melbourne city mission, sister norma jean barnett, jubilee hall, tracey jane ray, janne ray

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Japanese pottery and ceramics had varying basemarks, particularly those designed for export. Some restrictions were due to requirements imposed by other countries after WW2. This Japanese type of china was advertised in the 1920's and 1930's. During the years of the American occupation of Japan (1945-1952), all exports from Japan were marked "Made in Occupied Japan" and after the occupation simply "Japan". This information helps to establish the provenance of items such as this toast rack.This item is representative of ceramic domestic items used in Australian homes in the 1920s and 1930s.A ceramic rectangular toast rack decorated with a cherry design. Each end is shaped as a shallow bowl and there are 3 upright dividers to support slices of toast. The cherry design is hand painted and then glazed. The bottom centre is stamped with MARUHON WARE, HAND PAINTED, JAPAN around a K in a circle.Underneath "Maruhon Ware/ K in circle/ HANDPAINTED/ JAPAN"domestic items, japanese pottery

This piano was made by Aucher Freres of Paris, said to be famous for its pianos in the mid-late 1800s. Aucher Freres (Aucher Brothers) produced a model of piano that was built specifically for use on sailing vessels, the upright yacht-style piano. Pianos were amongst the domestic goods brought to Australia by many colonial immigrants. They were also imported by Australian distributors by the shipload and sought after by settlers. A piano was often found in a Missions to Seamen club room, where visiting seafarers would entertain or be entertained by music and song as part of their relaxation in port. A sarcastically written news article of January 2nd 1869 reported that the Secretary of the Loyal Liberals of Ballarat, Mr Henry Bell, was presented both with a “illuminated address” and a piano. The piano was made by Aucher Freres of Paris and was purchased for sixty guineas (which converts to around $7,500 Au in 2019). The gift was criticised for encouraging foreign industry rather than native Australian products, thus going against what the Loyal Liberals own protectionist policy. The writer goes on to state that several pianos made in the Colony compared very favourably at the International Exhibition with those manufactured by the English or French. He then says that “… the secretary … might learn a lesson from his piano ... the name Aucher Freres, Paris emblazoned on its front should be … a perpetual reminder of the hollowness of that protectionist imposture …” [Refer to Intercolonial News, Victoria, originally published in The Argus, was repeated in the Wallaroo Times and Mining Journal of South Australia 2-1-1869.] Aucher Freres pianos were still around in 1930. A second-hand model was advertised for sale as a good practice piano. The advertisement was placed by the Mount Gambier, SA, agents for Saver’s Pianos Ltd of Adelaide. The piano was described as “a sound little instrument of good tone and appearance”. The asking price in November 1930 was 32 pounds and ten shillings (which converts to about $2,500 Au in 2019). [Refer to Savery’s advertisement, Mt Gambier Border Watch 11-11-1930]This piano is significant for its connection with the time period of chapel and club room at Flagstaff Hill's St Nicholas Seamen's Church. It represents the form of entertainment enjoyed by seafarer's world wide, which is appropriate for a maritime village. The maker of the piano is famous for its quality pianos of the 19th and early 20th century.Piano, upright, polished wood. The wooden hinged keyboard cover lifts up to allow access to the keyboard. The piano also has two brass candlesticks. The top of the piano is hinged and lifts up to allow access to the piano mechanic's inside for tuning and maintenance. The inside flap has a music stand incorporated into it. It also has the usual two hard-soft pedals at the base. There are two brass decorated hooks at each end to allow for ease of movement when the position of the piano is changed. Maker's name inscribed inside keyboard lid in gold lettering. Made in Paris by Aucher Freres (Aucher Brothers)."AUCHER FRERES / Paris" (NOTE: the "C" is sometimes mistaken for a "G")flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, piano, music, upright piano, paris, france, aucher freres