Auger bits fit into the jaws of a hand brace (brace and bit), which is used to bore holes into wood. The tapered end, or tapered shank, fits into the brace, while the twisted shank and twisted point draw the bit into the wood. The twisted shank guides the bit into the wood, helping to remove chips produced by the cutters and enabling the user to bore deep straight holes. The collection pictured here includes two common patterns of twist bits: the ‘Jennings’ double twist pattern; and the ‘Irwin’ single twist pattern. Their finely pitched threaded points are typically used to cut hardwood timber.Set of thirteen auger bits, with tapered proximal ends and corkscrew spiraled distal ends. Some with tight and loose spiral patterns. Paint spots and surface rust.[size of each bit stamped on]churchill island, tool, auger bits

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Used by the donor in clearing timber at Olinda and Shady Creek, Victoria. Forms part of a timber clearing tool collection including cross cut saws and Trewhella jack.wood cutting/splitting wedge. Steel. commercially made. Has relief groove.TROJAN [stamped on side]timber cutting;, timber splitting, olinda, shady creek, churchill island heritage farm, wilfred dungan collection

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.one of three wedges cut from one piece of steel. No relief grooves.timber splitting, churchill island heritage farm, olinda, shady creek, blacksmith made, wilfred dungan collection, wedge

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.One of three wedges cut from one piece of steel. Blacksmith made.churchill island, wedge, wood splitting

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.one of three wedges cut from the same piece of steel. No relief groovestimber splitting, churchill island heritage farm, olinda, shady creek, wedge

On loan as part of the Herks CollectionWooden framed sign saying Ladies Tailor. The letters are made of silver paper pressed into the shapes of the letters which have been cut out of a thin veneer of wood.Ladies Tailor

Churchill Island Heritage Farm has a large photograph collection dating from the mid-nineteenth century to the last decadeBlack and white photograph of a woman standing behind a cart with another man on the cart. In the background, a building and some cattle can be seen.Catalogue number written in pencil on reverse. On reverse in pen '1939 Roy Chellew (in cart) and sister campbell. This is the wood dump behind Rogers Cottage. Various fallen branches collected over the island and were brought up and dumped here - either sawn or cut up for use in the (?) or open fires'churchill island

Pittock collection tools - Capstan cigarette tin containing mixed timber drills and one punch. Capstan Navy Cut Cigarettes tin, W.D. & H. O. Wills (Australia) Ltd. Sydney. Items stored in Pittance Coach builder's box, reference 13000.1.

Pittock collection: three wood spokeshaves, metal construction * one straight spokeshave, marked 64, 230 mm L x 40 mm W * one rounded spokeshave, marked B, 250 mm L x 60 mm W * one specialised marking/shaping tool, wide guide, marked Stanley No. 66 Pat'd Feb 9.86, 300 mm L x 50 mm W x 55 mm D * variety of shaping tool blades for Stanley tool, 60 mm x 15 mm blades. Stored in Havelock Flake Cut Pure Virginia Tobacco tin, 80 mm L x 55 mm W x 15 mm D Items stored in Pittock coach builder's box, reference 13000.1.

Georg Chodziesner made this chanukiah in Hay Camp in 1940. It was made to celebrate the Jewish festival of Chanukah. Georg was born in 1900 in Berlin to a prominent Jewish advocate Justizrat, Ludwig and wife Elise. Fearing arrest at the outbreak of war, Georg fled Germany to the United Kingdom. His wife, Dorothea, and son, Wolfgang Benno, emigrated to Chile. Like many German Jewish men, Georg found himself on board the HMT Dunera, bound for interment at Tatura. On release, Georg joined the Australian Army 8th Employment Company in which he served for the remainder of the war. Georg sought permission for his son to join him in Australia, and the pair were reunited in Melbourne in May 1945. Dorothea had passed away from illness in 1943. After settling in Australia, Georg worked as a Patent Attorney and remained working at the same firm until his death in 1981.This Chanukiah was cut from a kerosene tin using nail scissors and mounted on a wood block base. Medium: Wood, tin and ink The Chanukiah is embossed with a Magen David, the Star of David, and the wooden base has a poker work inscription: "Hay 5701 / 1940".dunera, wwii, internment, jewish history & people

Made by Karl Kirsch at Camp 3Square wooden buckle with cut out centre prong. Dark wood. Lacqueredbuckle, wooden, kirsch k, camp 3, tatura, ww2 camp 3, costume, accessory, clothes

1. Rectangular block of wood with shallow lozenge shaped cut out on one side. 2. Rectangular block of wood with planed edges. 3. Shavings of white oak timber recovered from hull of "Lightning" contained in glass jar.1. and 2. have "Lightning" written on them.ss lightning

There are two categories of cutting edge on broad axes and both are used for shaping logs by hewing. 1. Single bevel axe - one side is flat and the other side bevelled, also called a side axe. The handle may curve away from the flat side to allow an optimal stance. The flat blade but can only be worked from one direction and is right-handed or left-handed. 2. Double bevel axe - both sides are bevelled and produces a scalloped cut. The axe has a straight handle and can be swung with either side against the wood. A double-bevelled broad axe can be used for chopping or notching as well as hewing. Broad Axe - Double bevelled edge Straight wooden handlesmall lettering and government crows foot

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle is straight and the blade has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe or mattock used for agriculture and horticulture. Adze - smalltimber tools

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle of this adze is shaped like an axe handle and the blade also has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe used or mattock for agriculture and horticulture.Adze - Largetimber tools

Wood collection blocks. These are blocks made from cut-offs from the CSIRO Dadswell Wood Collection.Wood Specimens

This paper roll holder would have been used in a retail premises. Large brown paper rolls were able to be cut to any length for wrapping goods.Two wooden bevelled pieces, narrow piece on top wider piece on bottom with steel support ends and moveable centre piece screwed to wood pieces. Steel ends have "U" shaped holder in inside at centre.Steel ends have two raised diamond patterns. "24in CLARENCE 24in"shops, george evans collection

Wayne Alfred is a member of the Namgis Tribe of the Kwakwaka'wakw people. As a master carver he has an extremely high level of carving skill and knowledge about his peoples cultural objects, customs, tribal stories and legends. The Totem Poles of the North Pacific Coast in British Columbia and Alaska are traditionally carved out of red or yellow cedar, which has a spiritual and practical purpose. The wood was known for its durability, its resistance to rotting and the inner bark was utilised in ropemaking, clothing, hats, baskets and so forth. The Kwakitul People consider the cedar tree to be among the most sacred of all things provided by the Creator. They believed the Cedar tree to be the axis of the world and a pathway to the upper world. The wood is shaped using implements such as adzes, axes, chisels, carving knives, and chainsaws. Misinterpreted as Gods and idols to be worshipped, totems usually serve six purposes, such as a house pillar for support, a memorial or mortuary pole to commemorate (and house) the deceased, a potlatch pole (used for important traditional indigenous celebrations), a ridicule pole used to shame and a heraldic or family crest pole. Characters and symbols on these totem poles usually display family crests, history, wealth, social rank, inheritance, and privilege, as well as animalistic imagery derived from native animals and mythological creatures. Their sequence are indicative of past family events, ancestors, myths, and heraldic crests, with the bottom figure usually being the most prominent. In this work the 'thunderbird' is symbolic of power, strength and of ancestory. The Commonwealth Games Totem Pole was presented to the people of Nillumbik on behalf of the Canadian Government in recognition of Melbourne as the hosts of the Melbourne Commonwealth Games Team in 2006. Carved in cedar wood, this totem pole incorporates bold cuts and colours (such as red and green) offset by strong black. A relative degree of realism is used to depict the alligator located on the bottom of the pole, a man and a 'thunderbird'/eagle located on the top. With protuding element. No inscriptions. Bold cuts used to outline the characters and symbols as well as decorative and stylised features all over the pole. public art, kwakwaka'wakw, namgis, alfred, north pacific coast, british columbia, canada, totem pole, carved, commonwealth games, melbourne festival, cedar