H.M.A.S Watson, navy cap. Cream cap with blue tally band around it and tied bow attached on side. Stitching at the front of blue band - words ‘H.M.A.S Watson’. Two holes on either sides of cap for string to go through. Blue ribbon attached to inside. Also piece of string attached to inner cap, coming off stitching on one side.H.M.A.S. Watson stiched in yellow stitching on blue band at front of cap. A B Young inscribed in pen on inside material in white. 5 also inscripted under A B Young with other text - nnoa? White label stiched inside - AGCF - Australian Government Clothing Factory, VIC RAN Size 6 7/8, Indent No. 8405.66.0756070

Manufactured during World War II Manufactured during WWIIWWII 3 inch Mortar sight, Mk1, Lensatic. Dark green coloured brass metal body with brass fittings. Aluminium coloured circular dial with black painted numeric (zero to 180 degrees) and alphabetic (left and right) markings. Silver coloured butterfly nut fitting on lower body for sliding clamp adjustment. Steel screws and nut fittings. Two clear glass levelling bubbles are provided. Left and right adjustment dials, locking clamp provided for fitting of sight to a circular post fitting.SAR 1941 24-36 DD02124-3 TO LOCK (with direction arrow) L R (with arrow point marking) 0 to 9 R 0 to 9 L 0 to 180 R 0 to 180 L 210 GRS SEC CHARGE II I MR 2454 graticule markings 1400 to 600 Graticule markings 2700 to 10003 inch, mortor, sight, australian defence forces, ww ii

A circular cloissonne medallion Multi coloured with illustrations and writing on one side and a symbol on the other 2nd battalion Fox, Echo, Golf, Hotel MCRD San Diego Marine Corps Recruit Depot San Diego Californiathe military mint, military medal

Typical scabbard for the Pattern 1907 Sword Bayonet as used on the Short, Magazine Lee Enfield Rifle during World War 1. This Pattern was introduced in 1915. Leather Sword-Bayonet Scabbard with steel top-mount and chape for Hooked Quillion Bayonet (Item 0131). Teardrop stud for attachment to either a leather or webbing bayonet frog. Lithgow 'Star' trademark.

Black bottle with long neck, made of black glass with black metal screw top and label front and backKapyong 1989 is at top of label with emblem between, then 111, 38th year, Kapyong, Commemorative Port. 750 ml. Wine made in Australia. 18% Alc/vol. Mt Aitken Vineyard Gisborne Vic On the back of the bottle

An irregular cloissonne medallion Yellow with gold illustrations and red and gold writing on one side and silver gun, bayonet and fist on a black background with red and silver writing Crucible Enter recruits 54 hours 48 miles 49 lbs of gear 36 stations 29 problem solving exercises 8 hrs sleep 3 MRE’s Exit Marines One mind any weapon the military mint, military medal

Rectangular calculating instrument with (1) 'hinged lid' fitted with circular rotating dial for setting/reading altitude, speed, distance and temperature, (2) notebook inside lid, (3) circular dial with perspex cover, beneath which is (4) graph chart, moveable up-and-down by means of rotating knob on side of device. Curved brackets and elasticized straps on back for strapping onto pilot's leg.R.A.A.F. Ident. No. G6B/145 Serial No. WG/2233 COMPUTER NAVIGATIONAL Mk. III D. (Other inscriptions including instructions for use and scales for various measurements) "AB" hand written on strap (owner's initials?)

The original aircraft depicted was assigned to the US 5th Air Force, 49th Fighter Group, 9th fighter Squadron and flown by Lt. Reynold from May 1942 until early August 1942. The aircraft was nicknamed "Stardust". On 8th August 1942 this P40 was assigned to the Royal Australian Air Force as Kittyhawk A29-136 and assigned the code letter "N", retaining the "Stardust" nickname. This aircraft was often flown by Flying Officer Bruce Watson of 75 Squadron RAAF.1/48 plastic scale model of a P40E-1 Kittyhawk painted to represent 75 Squadron, Royal Australian Air Force in New Guinea in mid 1942.kittyhawk

The HMAS Maryborough was a famous First World War warship and this crest is commonly associated with the ship.A wooden plaque with decorative motifs, including two mounted plaques - including a photo of the original Maryborough and a patchwork insignia/crest.This crest has the patchwork with the words HMAS Marynorough written in stitching under the patch and crown. H.M.A.S MARYBOROUGH 1941-1946 J195-B248 brass plaque on the front, mounted to wood. hmas maryborough, australian navy, war, ships, plaque, insignia, crest

This model clinometer used in both WW1 and WW2 for checking artilllery and mortar barrel anglesPrecision instrument widely used by Alliied forces in two warsMetal with some parts painted black. Device comprises a segment of a circle with an adjustable radial arm with bubble level on a slide attached"Clinometer Field Mark VI No. A.221" Noblet and Forrest 1941" "Direction of Target" with arrow. "Use this Base for 0° - 45°" "45° - 90° Target" with arrow Circle segment graduated with 0 - 44 degrees on side, 45 - 89 degrees other side. Arm graduated 0 - 60 minutes both sides clinometer, artillery instruments

The aircraft depicted is a DAP MK 21 Beaufighter of 93 Squadron RAAF. The squadron formed in January 1945 and was disbanded in August 1946. It saw little combat in WW2.1/72 scale model of a Bristol Beaufighter Mk 21 as built by the Australian Dept of Aircraft Production in 1944.beaufighter

Tin box, scratched, rusty, black colour in appearance with writing on internal lid. Two bulbs, small tin containing clips, nuts and bolt. Front of lid LAMPS, SIGNALLING DAYLIGHT BOX SPARE PARTS MKII PMG 1942, Internal Lid - IMPORTANT When fitting a new bulb it should be INCLINED as shown, so that washer may be readly inserted between the spring contact and bridge piece. lighting tongue in washer must be in correct position......to the front of the lamp and the stem must be pushed right back in slot. LAMPS SIGNALLING DAYLIGHT.signalling, daylight, short range, lamps, spare parts

Framed A4 leaflet for Medals presented to the children of Victoria Wing - Warrant Officers and Non Commissioned Officers Academy soldiers who have served on operational deployments.

Jungle Green 50 round bandolier (with strap and 2 brass rings as 'buckle') for holding up to 10 x 5-round charger clips (2 charger clips per pocket.) With 'Carr Fast Australia' snap fasteners. AUST/MK1 CPI 6/67 N

Circular Medal Gold-colored edge, red center surrounding Marine Corps insignia badge (obverse) Gold-colored with multi-colored "MCRD" insignia/badge (reverse) "Marine Corps Recruit Depot; Leadership and Teamwork; San Diego" (obverse) "Headquarters And Service Battalion; The Making of Marines" "We Support" above MCRD badge/shield (reverse)

Two metal tins of which one fits into the other. Larger tin has two handles, smaller tin has only one handle as the other has broken off.Smaller tin - D(arrow)D, IDtin, mess tin

Awarded to L.G. Donelan by the Shire of TowongMetal medallion, tarnished on face and rear.Face - FOR GOD, KING AND COUNTRY Back - SHIRE OF TOWONG For Honourable Service Rendered L.G. Donelan World War 1939 - 45l.g. donelan, towong

Metal Box, 5-sided, various sighting and other dials and attachments (including battery compartment)A. M. BUBBLE SEXTANT MARK IX 6B/151 No.15798/40 BRIT. PATS. 480112 490621 AND PENDING

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. shirt, australian armed forces, auscam cammo, uniform

WW II British Gun Sight 'Telescopic Bearing' Brass barrel with tops lens for sighting (missing lens cap on barrel) Originally on a circular metal base plate, most of which has been cut off(T)EL BEARING No 10 MK I (imprinted on underside of base plate; other inscriptions on base plate of original article missing from this item) ("T" missing as a result of base plate cutaway)

World War II Manufactured during WWIIDark brown rectangular stitched leather case with folding lid for a WWII 3 inch Mortar sight, Mk1, Lensatic. The folding lid has a leather strap and metal buckle to hold the lid closed. The leather case has a leather adjustable carrying strap with a metal buckle. Shaped leather covered wooden mounting supports are located inside the case. Leather covered padding is provided on the inside of the case lid.CASE 3 INCH stamped on case top. Other markings on the case top are illegible. White painted number 3 with a faded red background on the case lower front. White number 1.3 painted on case top.3 inch, mortor, wwii, australian defence forces, case, sight, leather

Box with fittings/padding inside for securing sextant (see Item 0172.1)Front Plate: 68/151 BUBBLE SEXTANT MK. IX No. 15708/40 INDEX CORRn. 0

Dark blue printed instructions on paper mounted on a buff coloured cardboard card.LAMPS, SIGNALLING DAYLIGHT, SHORT RANGE Lamp can be used either (1) on the spike and spike extension stuck in the ground or (2) in the hand if necessary, or (3) withe the adaptor provided on a standard helio stand. SIGHTING TUBE: It is important to see that the lamp is so aligned that the distant receiving station is at the centre of the cross slots and maintained in that position the whole time that signals are being sent. BULBS: when fitting a new bulb, insert the locating tongue on the washer to the front and push the stem right back in the slot. BATTERIES: The correct replacment unit for this set is 8 "S" cells connected "in series". Screw up both terminal nuts tightly, ans see thar all connectors are in position. NIGHT SIGNALLING: An adjustable screen is supplied for reducing the light and one of the colour discs should always be used in conjunction with it when signalling at night under enemy observation. KEY CONNECTIONS. Use the two-pin plug in No.1 socket as long as the light is good enough, then cahnge to No.2. This will greatly lengthen the life of bulb. Used bulbs and batteries should not be relaced in the box, but discarded and a fresh supply obtained. Get a copy of detailed instructions "How to Use" this signalling outfit. KEEP LENS, MIRROR, BULB AND FRONT GLASS CLEAN.instructions, lamp, signalling, daylight, short range

Patented by William Mills and known as 'Mills Bombs', these were first used in WW1 and were used by the British Army until 1972. Three models were made - No. 5, No. 23 and No. 36. The latter two could be fired from a rifle (with suitable attachments). Note that the casing is grooved to assist fragmentation. These grenades had a time delay fuse of 7 seconds initially but later a 4 second fuse was introduced. Upon explosion, its lethal range was approx. 90m but on hard ground it could be double that. Over 75 million were produced.Cast-iron 'pineapple' shaped anti-personnel grenade.

This is believed to be a period "reproduction" most likely made from a JEEP vehicle spring by Australian soldiers to sell as a souvenir. US soldiers were prime targets for this type of deception as they were known to pay a premium for "Japanese" samurai swords.Steel blade and wooden handleNone

Circa WWII type 92 Japanese steel helmetCirca WWII japanese type 92 steel helmetWWII Japanese steel helmet, Type 92, painted silver post-war. A five point star is soldered to the front. There are four small holes (two on either side) in the top of the helmet. A circular metal stud is located on either side of the helmet at the rear. Three liner mounting attachment points are located on the inside rim of the helmet. The rim of the helmet is cracked in two places.helmet, japanese, headgear

Identification plate is for the Royal Australian Mechanical and Electrical engineers (RAME), 3rd Military District, vehicle number 743.Vehicle identification plate used by the Australian Army.Small square shaped steel metal plate. Khaki coloured paint on rear face. Blue, yelow and red horizontal painted stripes on the front face. White coloured numbers with a narrow horizontal white line painted on front face. Small hole drilled through the plate on the top.Horizontal blue, yelow and red horizontal stripes. Number 3 on top of a narrow horizontal white line with the numbers 743 underneath.vehicle, identification, plate, rame, 3rd military district

Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters

Steel scabbard for 182.1Nil