Given to the Society's Museum by the Nunawading Rotary Club following their visit on 14 February 2001.Nickel plated spear shape letter opener with round emblem inscribed with Rotary International on blue panels on cream and gold circle. Centre crossed with blue panels covered with plastic.Rotary Internationalcivic mementoes, souvenirs

Calico sheet with stencil for making apron. Shape of apron in broken line with stencil pattern for embroidery of mexican donkey pulling flower cart. Attached is a sheet with colour references for embroidery.Semco Fashion Pattern Semco Design K912handcrafts, needlework

Waterproof vinyl package (packet opened) rectangular in shape. Discoloured on outside olive green drab on inside. has a tear strip. Gauze bandage attached to stretch material bandage. Packet. on Front. 6510-66-108-4140 DRESSING,WOUND *sterile compressed for field use. CAPO 7830065AC Lot number B93433 Smith + Nephew * Inner Pack Contains Sterile Dressing Date stamped "2 May 1994" Packet on Back To open tear down here. DIRECTIONS FOR USE Retain outer bag. Remove dressing from inner bag. Grasp bandage and pull pad open. Place face of pad onto wound. Place outer bag on to the other face of pad and bandage. Wrap bandage around and tie or pin bandage as required. DO NOT HANDLE WOUND OR PAD. (Recorded on Dressing) OTHER SIDE TO WOUND.

Used as footrest for horse riding. Attaches to a strap which attaches to a saddle.Stirrups x 7, dome shaped. Various shaped footrests} 2 oval ring shapes, 2 oval shaped rings with middle strip & 3 solid oval shaped.

19th Century Reticella lace - probably Italian.White cotton Reticella needle lace edging. V-shaped pickets are on one end and along one edge. Centre design has leaf-shaped tallies and circle shapes.Nillace, italy, reticella, handmade

2 x metal/iron shaping tools. Flat rectangular metal piece has corrugated pattern underneath. This metal piece has a rectangular metal handle welded onto itblacksmith, forge, shaping tool

White china plate from the Bee Hive Café Sandhurst, oval shape with blue around rim, insignia in blue reads BEE HIVE CAFÉ H BURRIDGE SANDHURST.J.F.Wilemanorganization, business, bee hive

A Legacy badge that was issued by some Clubs to widows, using the term Torch Bearer. Possibly from Legacy Club of Sydney. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The card makes a tax deductible receipt.Enamel badge in the shape of the Legacy torch, it is made of gold coloured metal with white, red and blue enamel, and the words Torch Bearer in gold. Fastening is a safety pin style clasp.Imprinted on reverse 'AJ Parkes' who were the manufacturer.badges, widows

Straw container, original to the Cafe, which supplied afternoon teas and suppers to casual visitors and Chalet guests. Spiders and milkshakes were popular with yung guests after evening tournaments, films and concerts. 'When the Victorian railways took over managemen of the Chalet from 1 october 1924, they ran their dining room and cafe in similar fashion to the dining cars on their trains and refreshment rooms on their stations, using the same ceramic hotel-ware and electro plated nickel silverware (EPNS), all made to order items that are clearly idenitified by the distinctive 'VR' monogram. The Chalet retains a good selection of of the diverse range of EPNS item formerly used in the dining room..- which in all theoir variety and function help to interpret the dining room protocols of the 'tourist house' and the service provied by the Victorian Railways refreshment and Services Branch. Many of the items were manufactured by by Stoke & Sons of Melbourne (est. 1856.' (Pg 103. Historica) Listed in Draft Inventory of Significant Collection items. Appendix A.3.Tableware. (Pg 166 Historica).Electroplated silver drinking straw container. Tube shape. Moulded circular base with matching lid with central post which can be pulled up to reveal drinking straws resting on it.On front, "VR / Straws" Also silver stamp on base and inscription;"Parmount / plate / best / EP A1 NS / quality / warranted / hardsoldered / K. G. LUKE / MELB / 6889"

Used in the 19th century.A wide bladed forged steel adze with a smooth curved wooden handle. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes, wood

Wreckage from unknown ship. Found on "big beach" at Telegraph Point. 2002. Made of wood with corroded metal fragments, the hatch is undated wreckage from an unknown ship. The remnants of shipwreck fabric have second level contributory significance for their interpretive and historic value as artefacts that highlight the distinctive history of the Gabo Island Lightstation.Timber & steel hatch cover from ship.(wrekage) Rectangular shaped piece of wood with a circular shape cut from centre. Corroded metal fragments have adhered to the wood.

Melbourne Legacy has relied for funding on grants as well as donations, and continues to do so in the absence of any government funding. The 1988 grant by the William Buckland Foundation was substantial enough to warrant a commemorative plaque.Evidence of one of Melbourne Legacy's sources of funding.Plaque, brown rectangular shape, raised symbol of Legacy top centre, raised printing and edges. Mounted on rectangular timber, 2 holes drilled centre top and bottom of mounting.Brass plaque, raised symbol of Legacy top centre. Raised printing "Melbourne Legacy gratefully acknowledges the substantial financial assistance received from THE WILLIAM BUCKLAND FOUNDATION towards the provision of assistance to the training programme for Legacy handicapped dependants of deceased ex - servicemen. 1988plaques, donations

The EK was the first model Holden that had the option of automatic transmission. This was the 3 speed hydra-matic that offered performance and economy that was not far short of the manual. This vehicle still used the tried and true 138 cubic inch power plant.This was a local Trafalgar vehicle formerly owned by Graham Cook and family. The interior of this vehicle is totally original while the exterior has undergone a substantial repaint and re-chrome, This was required because the previous owner kept the external spotlessly clean and wore the paint out.Blue body sedan with white roof ,sun visor, upright rear vision mirrors added on .Hub caps featured lion emblem. Chrome arrow shape ornament on bonnet.Holden Special Registered number 63453-Hvehicle, holden, 1961, car

Established at Victoria Barracks, in Melbourne, in June 1940, the 2/23rd Battalion was raised as part of the all-volunteer Second Australian Imperial Force and assigned to the 26th Brigade. Under the command of Lieutenant Colonel Bernard Evans, a small cadre of experienced personnel drawn from Victorian Militia units were concentrated at Victoria Barracks prior to the battalion headquarters being relocated to Albury, New South Wales, where a large number of volunteers were completing their recruit training at the 4th Recruit Training Battalion. Upon the conclusion of this course, the recruits were posted to the 2/23rd and the battalion – over 900 strong– moved to Bonegilla, Victoria, just across the border, where more complex collective training was completed prior to departure overseas. A large majority of the battalion's initial intake of volunteers came from the Albury–Wodonga region and as a result, the 2/23rd became known as "Albury's Own"This item is part of a collection of items owned by Athur Lock, a member of the 2/23rd Battalion, an all-volunteer Second Australian Imperial Force which served as part of the garrison during the Siege of Tobruk, then at El Alamein, New Guinea and Borneo. It has particular local significance as the battalion was know as "Albury's Own" because a large majority of the battalion's initial intake of volunteers came from the Albury–Wodonga region.A wooden plaque in the shape of a shield commemorating the 2/23rd Battalion known as "Abury's Own". It incorporates a representation of the 2/23rd Battalion colour patch worn after the Siege of Tobruk. At top of plaque "2/23RD AUST.IN.BN./ALBURY'S/OWN"world war 11, rats of tobruk, tobruk, arthur lock

This Roll begins in 1924 which is incorrect. As the notations centre of the board states “there is gross errors and emissions etc”, “refer to Appendix One of A Century of Service”, the history of the RSL Bendigo, Cat No 8093. The true roll starts 2015/16. Also stated “As of 28.10.2000 - Bendigo District RSL”. Names were added on this role up to approx 2015. As a new Honour Board was being put together to combine the old & new RSL Sub Branch it was decided to omit the names on the old board so it only reflected “Bendigo RSL”. The new board will be placed in the Bendigo District RSL Sub Branch Havilah Rd plus also contain Life Members. The old board will remain in the Soldiers Memorial Institute Building. Refer also Cat No’s 8019 & 8020.Honour Board rectangular shape, timber construction, brown stained with text in gold writing re the Presidents, Secretaries and Treasurers of the Bendigo RSL Sub branch from 1924 - 2005.“Bendigo R.S.L.”brsl, smirsl, executive, bendigo

Used by Melbourne tramways to assist tram drivers in driving through critical areas, such as providing clearance marks at turnouts, cross-overs, and stopping points. See item 1188 for a guidebook. Demonstrates the method of providing road marking systems to drivers.Stainless steel object square shape with a machine punched and formed prong to enable it to be placed and secured into the ground. Item has been used and has bitumen road materials attached to it.signs, tramways, drivers, stud markings, instructions

Robert Clark was a self educated man who had arrived in Australia with his step father to take up mining in 1854. He worked in several local mines and being familiar with the hardships associated with mining life, helping to establish the eight hour day for miners. Robert married Sarah Jane Kernaghan in 1862 and together they had nine children. Robert Clark was first elected in 1872 and remained a councillor until his death in 1883. He died aged 41 years. This elaborate Letter of Appreciation was hand drawn and painted by artist and photographer Frederick de Kock who was associated with Mr N Caire's photographic Studio, View Place and by 1882 was producing and teaching hand painting on ceramics. In 1883 he advertised as a photographer with his own studio on the corner of Mitchell and King Street, which was later named the Bendigo Portrait Rooms. 180.1 Donated by Jenny Taylor; 180.2 Organisational created. Illuminated Letter of Appreciation in shape of arched window. From Sandhurst Pioneer Co-Operative Co Limited to Robert Clark. Hand drawn and painted on card. Signed by eight directors.mayor city of sandhurst, councillor robert clark, mayor clark, mayor of the city of sandhurst

This small handcrafted bookmark was made by one of the Jones sisters, Gwen or Edna of 'The Union' homestead at Woolsthorpe in Western Victoria. An Australian domestic example of a corner bookmark of a type popular in the 1950s.Two small pieces of blue felt cut into shape of lady's face and stitched together with features added with wool stitching. Wool thread as hair stitched to hang outside the pages.Nilbookmark, felt, woolsthorpe, victoria

Peter Ball collection, refer Cat No 4704Foot powder tin green colour rectangular shape, top has a rotating cap with 6 holes in, two sides have details in black print re makers and content.Front side, “(arrow up) FOOT POWDER 2 oz Net weight”. On rear side “Formula, salicylic acid 3% starch 10% Talc 87%” On base in pen, “PBall”tins, foot powder, talc

Twin cloisonné vases decorated ornately in red with floral designs in green, blue, and white on carved wooden bases. The vases have a bulbous shape, and the lip of each is painted gold.cloisonné, vase, enamel

WW11 uniform patches all had the grey background. These belonged to Clarence W Curnow VX100151, 2nd AIF. Refer Cat No’s 1444, 1445.2..1) Colour Patch, felt. Rectangular shape, grey background. Dark Blue on the Left and White on the right. .2) Same as 1448.1 Both relate to The Australian Army Service Corps.badges, uniforms, army, curnow

Belonged to Capt Warick Rosenthal No TX6321 AAMC. Refer 622.3, 775..1) Officers shoulder rank insignia, blackened pressed brass, square shape pyramid style. On rear two clips & pin. .2) Same as .1) except has no pin.numismatics, badges, military rank

This butter cooler was used in households to prevent butter from melting in the warmer weather. Ice would have been used in the butter container. The top of the container is domed, indicating the shape of the butter at that time (late 19th century). This butter cooler would have been a costly item and would have graced the dining table of a family that had considerable means. It would have been used on a dining table even after the invention of refrigeration in the 1880s as the eating rooms would have had little or no cooling mechanisms in the late 19th and early 20th centuries. This butter cooler has no known local provenance but it is a very attractive item and is retained as a good example of a household item no longer in use. It will be very useful for display.This is a silver butter cooler with a circular base with an ornamented edge. The base has a stem holding two highly ornamented arms branching out from the sides. These arms hold an oval container which has a chased silver base and an overhanging chased silver top. Inside the container is the space to hold ice or cold water. On top of the inside of the container sits a small round lid which holds the butter and the ice. The lid has several small holes for the ice water to drain underneath. The base of this lid is impressed with moulded fruit and leaves. The oval container has an over-arching handle attached. This is highly ornamented in fretwork. The sides of the container have two projecting pieces for holding the butter cooler and two other smaller projecting pieces with chains attached for hanging the object. One of these pieces has an oval holder for turning the hinged top of the container to close the container. This top has a chased silver patterning on its top. When the lid is closed the container adapts to a globe or egg shape.‘Made and Guaranteed by Meriden B. Company 5085 U.S.A. household items, history of warrnambool, silver butter cooler

This type of butter mould was used by rural families in the Kiewa Valley to fashion/shape home/farm made butter either for domestic use or to sell locally.Kiewa Valley was a dairying district with many farms in remote locations especially before the State Electricity Commission of Victoria built the Kiewa Hydro Electric Scheme from the 1940's. This pair of butter pats have been crafted from wood. One has one side with grooves running from the handle to the tip of the rectangle. the other side is smooth. These grooves would stop the wet butter from clinging to the pat. The top side of the pat has been bevelled. The second pat is longer and wider without grooves along the handle. This one also has 3 arrows on the handle pointing down towards the handle end and isn't bevelled. 3 arrows.kiewa valley. butter pat. farm produce. domestic produce. dairy. farms

Two photographs of Main Street Stawell Scenes - Set in Australia Shape. Main Street taken from front of Town Hall and Lower Main Street stawell streetscape

The objects comprise a quantity of small calibre lead shot raised from the LOCH ARD shipwreck site by Flagstaff Hill divers in 1976. The Maritime Village’s collection has companion pieces. The three masted, iron hulled, LOCH ARD was wrecked against the tall limestone cliffs of Mutton Bird Island in the early hours of the first of June 1878. Included in her diverse and valuable cargo were 22 tons of lead shot, packed in cloth bags and wooden casks. Bulk quantities of lead shot, uniformly round balls of dull grey metal ranging from 2mm “birdshot” to 8mm “buckshot”, were routinely exported to the Australian colonies. Shot was used mostly as projectiles fired from smooth bored guns to bring down moving targets such as wild ducks and small game. It was also useful as ballast, when a dense, “pourable” weight was required to fill cavities or establish volume within a measuring container. The production of consistently round spheres of lead shot required the pouring of molten metal through a sieve and then a long drop through the atmosphere to a water filled basin for final cooling and collection. This “shot tower” process was first patented by William Watts of Bristol in 1782. His calculation of a 150 feet fall was not only to form evenly spherical droplets through surface tension, but also to provide partial cooling and solidification to each shot before they hit the water below. The value of his innovation was the minimising of indentation and shape distortion, avoiding the expense of re-smelting and re-moulding the lead. Lead shot was already being produced in Australia at the time the LOCH ARD loaded her cargo and left Gravesend on the second of March 1878. James Moir constructed a 157 feet circular stone shot tower near Hobart in 1870, with a peak annual production of 100 tons of lead shot sold in 28 pound linen bags. However colonial demand exceeded this source of local supply. The continued strength of the market for lead shot in the Colony of Victoria prompted substantial investment in additional productive capacity in Melbourne in the next decade. In 1882 Richard Hodgson erected the 160 feet round chimney-shaped Clifton Hill shot tower on Alexandra Parade (VHR H0709) and in 1889 Walter Coop built the 160 feet square tower-shaped Melbourne Central shot tower on La Trobe Street (VHR H0067). At its peak, the Coop Tower produced 6 tons of lead shot per week, or 312 tons per annum. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the LOCH ARD is of State significance – Victorian Heritage Register S417 Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A quantity of lead shot pellets retrieved from the wreck of the LOCH ARD. There are 242 loose 2mm pieces and 17 loose 4mm pieces. They are in good condition, with some shape distortion and sedimentary concretion, and shot tower made.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, lead shot, colonial industry, melbourne shot towers, victorian metallurgy, colonial imports

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1" Rounding/Bullnose, Moseley & Son London. Stamped ‘14’, and with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘1’ added on entering the collection in 2010.bertie greenwood, woodworking tools, moulding planes, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/8”, Beading, Moseley & Son London. Stamped ‘1/8’, and with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘2’ added on entering the collection in 2010.bertie greenwood, woodworking tools, moulding planes, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Wood & Metal, 3/4” Ogee, Sims Queen St West London. Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘3’ added on entering the collection in 2010.bertie greenwood, woodworking tools, moulding planes, carpentry, burwood road — hawthorn (vic.)