RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a long association with Wodonga due to its service at the Bandiana base just outside of Wodonga. The inscription on the side of the base reads: "Presented to the Citizens of the Rural City of Wodonga by the Commanding Officer and members of RAEME Trg Centre on the occasion of the granting of the Freedom of the Rural City of Wodonga to RAEME Trg Centre 21 October 1978RAEME Corps has a long association with the city of Wodonga through its involvement in training and logistics at the army base at Bandiana.An award featuring a small model of the cannon "Zamzama" (Captor of Forts) mounted on a polished wooden base. The award includes a plaque outlining the significance of "Zamzama" on the top and another plaque explaining the significance on this award on the front of the base.Explanation of "Zamzama" beside cannon: "ZAMZAMA (CAPTOR OF FORTS)/ The original 14' 4 1/2" long, with 9 1/2" bore, was cast in brass in one/ piece by Muslim engineers in the year 1757 on the orders of the/ emperor AHMAD-SHAH-ABDALI. It was used in several battles and/ proved its value as a great weapon of destruction. It soon became to be/ regarded as a "Tallsman of Power" and continued as such until it was/ ruined in 1818 at Multan. Today it is housed in Lahore, where it was/ placed by H.R.H. the Duke of Edinburgh in 1870."raeme, rural city of wodonga, freedom of the city wodonga, australian military, bandiana

Louis Heinrici, Germany, circa 1900 a small Stirling type hot air engine in which a body of air is worked constantly, being alternately heated and cooled during each revolution of the crankshaft. Heinrici hot air engines are of the valveless, closed cycle type, generally called Stirling cycle engines, after Robert Stirling, the Scottish Presbyterian minister who pioneered their development in the early 1800's. They operate by alternately heating and cooling a quantity of air, called the working fluid, contained in the engine's internal spaces. Heat is applied externally and passes through the cylinder wall, heating the working fluid, which is then expanded against a piston to do mechanical work. After heating and expanding, the working fluid is moved to a cool space where it cools and contracts before being returned to the hot space for the cycle to repeat. It has a displacer (just a loose piston), below and in the same cylinder as the power piston to which it is connected via cranks and linkages so as to lead by 90degrees of crankshaft angle. The displacer space and the piston space are connected by the annular gap around the loose fitting displacer so that the working fluid moves between these spaces and changes volume by the appropriate ratio as the engine rotates. Because they have no valves and experience no sudden pressure changes, Stirling engines are noted for quietness and reliability. Heinricis use air at atmospheric pressure for their working fluid, but for higher specific output (power for size) and better efficiency, modern Stirling cycle engines use pressurised gas- air, nitrogen, helium or hydrogen.Historic - Hot Air Engine - MotorHot Air Motor made of Steel with two drive wheels. a small Stirling type hot air engine in which a body of air is worked constantly, being alternately heated and cooled during each revolution of the crankshaft. Heinrici Motorheinrici hot air motor, puffing billy

Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

Taken between circa 1920 - 1930 this photograph depicts a Hydraulic water jet in the foreground and a man dressed in dark trousers, a white long sleeved shirt and broad-brimmed workers hat digging around in the Three Mile Mine at Barramutha. The mine was an important gold resource and was typically mined using a method known as hydraulic sluicing whereby high powered water jets are used to dislodge rock or move sediment. The remaining water sediment slurry is directed through sluice boxes to remove the gold. The Beechworth mining district was one of six mining districts established by the governor-in-council on 4th of January 1858 under the provisions of An Act for Amending the Laws Relating to the Goldfields (21 Vic no. 32).This photograph shows cultural and research value into the historical methods of hydraulic sluicing in the Beechworth mining disctrict. It also shows the evolution of the mining methods and has potential for understanding future engineering endeavors in the context of victorian mine goldfields.Black and White rectangular photograph printed on matte photographic paper. Reverse: Copied from original on loan from Webb (QLD)/ Donated Nov 2009/ Barnawatha Three Mile Mine c1920-1950/ Owned by Plain Bros then Parkinsons/ Managed by John Weir, Peter Jenson, Jack Cox/ Slicing. three mile creek, three mile goldfields, three mile beechworth, goldfields, #beechworth, hydraulic mining, hydraulic sluice, burke museum

The Dead Man's Penny is a commenorative medallion presented to next of kin of men and women who died during \world War One.The Bronze medallion features an image of Lady Britannia surrounded by two dolphins (representing Britain's sea power) and a lion (representing Britain) standing over a defeated eagle (symbolising Germany). Around the outer edge are the words 'He died for freedom and honour'. Next to Lady Britannia is the deceased Soldier's name, with no rank provided to show equality in their sacrifice. The Dead Man's Penny was accompanied by a letter from King George V, stating 'I join with my grateful people in sending you this memorial of a brave life given for others in the Great War'.William Hendric 3373 Enlisted 3/8/1915 Embarked ex-Brisbane on H.M.A.T "Sea Bas" 4th Pioneer Battalion A.I.F. Born 1994 Died 1st April 1918 Foster Mother: Mrs J Charlesworth, Creswick. (Cabbage Tree)The Bronze Medallion Features an image of Lady Britania surrounded by two dolphinsInscribed William Hendricww1, creswick, hendric, 4th pioneer battalion a.i.f

This photograph was reproduced on the cover of the magazine 'Housewife, Home and Family', in October, 1960 with the heading, 'Miss Frances Burke, Brilliant Australian Textile Designer'. The photograph contains interesting contradictions: Burke, wearing a cocktail hat whilst painting, was never a housewife, nor did she have children. Gladys Hain, editor of the magazine, exhorted women who did have children to get busy, start businesses and contribute to the economy! The image highlights Burke's ability to attract publicity and demonstrates her acute understanding of the power of PR and marketing. Burke established her textile business in 1937, developing it between the wars in a very challenging marketplace by capitalising on opportunities as they presented. Robyn Oswald-Jacobs, 2017Photograph featuring Frances Burke painting at desktextile design, studio, rmit design archives

Document regarding the abandonment of tramways in Ballarat and Bendigo. Presented to State Parliament Sept. 1970 by the MInister for Fuel and Power, the Hon J C M Balfour MLA. Outlines the losses incurred by the SEC, replacement public transport system, the worn out nature of the system, the gifting of one Bendigo tramcar to the AETM, costs of track repairs and new trramcars, tenders for replacement bus services, retrenchment payments to staff, reconstruction of existing roads following removal of the tracks, and town planning and traffic aspects. Includes a photo of a bus and interior seating. A graph from 1934 to 1970 shows the service miles, passengers carried, average fare, expenditure, revenue and loss, along with dates of major fare revisions.Yields information about the 1970 proposal to close Ballarat and Bendigo tramway systems which was successful despite previous attempts when the Bolte Governments did not have the numbers in the upper house.Document 16 Quarto sheets, duplicated and one sheet with a folded colour graph.In ink on front sheet "D/T/S"tramways, ballarat, bendigo, abandonment, closure, parliament

Bendigo Advertiser "The way we were" from Saturday, April 3, 2004. Power brokers: this photo of members of the 1960 Bendigo Junior Chamber of Commerce was taken at the City Club Hotel (now Fountain Court). Pictured are from left back row: John Hulls. Third row: Neville Stllwell, Tim Webb, Wal Gillard, Alan Johnson, Bill Edgar, Ron Angus, Peter Huthnance. Second row: Lindsay Mann, Ken Birch, Frank Sumner, Greg Hunter, Brian Armstrong, Ian Jenkins, Corvan Townsed. Front row (seated): Brian Eskdale, Jack Burns, Ken Lewis, Stan Biggs, Peter Bird (president) Lin Jackman, Graeme Norris, Frank Maher, Dal Martin.newspaper, bendigo advertiser, the way we were

Photograph - black and white. The new SEC building still under construction. The 'old market building' can be seen to the left of the photo. Man on bicycle in dark clothing, man in black clothing walking to the right, lady in dark clothing walking to the left, light post with three cross bars and street light, advertising material displayed on corner section of fence, man in black standing over bhis bicycle to right of tree, dark colour utility vehicle parked in williamson street, twin power poles connected with 5 or six cross bars, vehicle angle parked in front of utility. Rear of photo has stamped name of the developer of the photo printed by Oliver's Bendigo. Number 79 witten in pencil.Printed by Olivers, Bendigo.organization, public utility, electricity company, s.e.c. victoria. 1939. bendigo.

Used to communicate with the local telephone exchange and for connection to other subscribers. The introduction of automatic exchanges saw the their demise. This phone was used in the family home of the donor at Caboolture (aboriginal for carpet snake) during the 1940s and 1950s.A magneto telephone for communication with a manual telephone exchange. The handle on the right hand side, which was turned to rotate the magneto to call the exchange - ask operator for a number and then to be connected. Telephone enclosed in a specially designed box for mounting on the wall. There was a bell on top which rang when the magneto ringer at the exchange was turned. Fitted with a carbon microphone mounted on the front of the box for the transmission of the spoken word and an electro- magnet. A receiver which hangs on the left hand side on a hook. The hook acts as the on and off switch to answer the call and to switch on the battery to provide power for the receiver and energize the transmitter. There is an angled ledge for writing any messages. There is no battery. The circuit for the phone is on the inside of the door to the interior of the phone. pHone is type CDA116 - PMG Registered - Ericsson.communication, telephonic

713.1 & 71.32 - A4 sized originals (ex Laser Printer) of BTM Exhibition brochure titled "Law and Order on the Trams". Prepared for the 1997 CHHA Exhibition, 11&12 October 1997, then at the depot. Features three photographs - opening of Lydiard St. North, ESCo No. 2 and power station and group of ESCo employees in front of the Grenville St. shelter. Has notes on horse trams, trams and MP's during World War II, the last tram of the day and policing employees. Printed onto "Premium coated ink Jet" paper, 25% cotton. Printed by a HP6P printer. 713.3 - photocopy of 713.1 and .2 as handed out, printed onto white "Reflex" paper. Image added 20-12-2016trams, tramways, law and order, employees, police, esco

Forty Eight page book stapled with a fold out track map at rear contained within a glued light card cover. Printed on gloss paper with many black and white photos. Book titled "Melbourne's Tramways in 1974" written by David R. Keenan. Details the operation of the Melbourne Tramway system prior to the introduction of the then new Z class trams, in the final decade of the MMTB, its operations, track, training, management, power supplies, tickets and other operational systems. Includes notes on services, tramcar fleet allocation, depots, fare sections and running times. Has introduction by author looking at Melbourne compared to other tramway systems around the world at the time and acknowledgements. Two copies held. On the front cover in black ink "Ex ARHS Archives". Copy 2 has a price sticker "2.25" in top right hand corner.trams, tramways, melbourne, mmtb, tramways, tramcars

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "5" stamped in black in top corner. Photo of the SEC Ballarat Ford welding truck, at the intersection of Macarthur St and Wendouree Parade, View Point Junction. Note tram stop signage. Three SEC workers in view, with road signage set up and truck connected to the overhead for welding work. Note bicycle leaning against truck. Welder - Weld For high resolution scan see btm2864.tif See Reg Item 7700 for another photo of the truck in the Power Station yard. "Drummond St. and View Point Junction Ballarat" / "8-4-58"tramways, trams, rails, welding, trucks

Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 1, No. 4, Feb 1937 titled "Electricity Supply for Buninyong" and "Ballarat Trams in Picturesque Setting". Each item had a thin strip of paper attached by staple to the top left hand corner, giving the Vol. No. details. The first story features the provision of power to the town of Buninyong on 14/1/2937. The supply was provided by a 6.6kV line running from Sebastopol. The second story with a photo of a line up of 7 trams in the Gardens following the annual outing of the Pleasant Street State School trip to the Botanical Gardens and special trams in general. Record revised 3/4/2019 to add digital images with those from Andrew Cook CD.trams, tramways, power supply, picnics, buninyong, wendouree parade

Yields information about the Geelong Railway Station and Geelong's tramcars, c1915.Black and white reproduction photograph of a page from the Now Magazine, 21.3.1912 issue featuring photographs of the opening of the Geelong Tramways on the 14.3.1912. 4407.1 - features 6 photographs: Guests at the Works, Mayoress of Newtown at the wheel; Pakington St Geelong West, Mayoress of West Geelong at Driver, Guests at the Power house, and Guess returning to their homes by Tram (see 4407.3) 4407.2 - Reproduction from page 15, NOW Magazines, News of the Week, of the first car leaving the sheds - Mayoress of Geelong Driving, H.L. Potter photograph. Two copies 4407.3 - separate print bottom photo titled "Guests returning to their homes by Tram" Note each of the trams driven by the respective mayoresses, were decorated differently. Some printed on Hewlett Packard paper.4407.1 - on the front in ink "12) other side of page" "12)", "13)1" and "14.3.1912" and "21.3.1912" along the bottom edge. On rear "12) top rt hand pic only ie Newtown car" and "13)1 Bottom rt hand pic only ie guests going home". Also has a "William Scott" address label. 4407.2 - On the front in ink "NOW Magazine, issue 21.3.1912 (News of the Week magazine Geelong", "14.12.1912" and on rear "11" and a "William Scott" address label. 4407.3 - On the front in ink "News of the Week, a Geelong magazines / opening day 14.3.1912", and "issue 21.3.1912" and "13)2" in top right hand corner. On the rear "13)2 same as 13)1 bottom right hand corner only, Guests going home" and a "William Scott" address label..trams, tramways, geelong, first tram, opening, newtown, tram 4

Ski-Horizon is the official journal of the Federation of Victorian Ski Clubs which began publication in 1949. The were 26 original member clubs which included Albury Ski Club, Bogong Ski Club, Myrtleford Ski Club, Tallangatta and District Ski Club and Wangaratta Ski Club. Two pioneers of Falls Creek, Tom Mitchell, M.L.A., and Martin Romuld were Vice-Presidents of the Federation.This Journal is significant because it documents the early development of skiing in Victoria.The journal features stories and events chronicling developments in Victoria and internationally. Items related to the Falls Creek Area in this publication include:- Page 2: Reference to ski instructors and Ski Schools in Victoria including Bob Hymans' School and Ernst and Auriel Forras who operate the Nussen School with Max Denham. Page 5 Bogong High Plains locality map, with construction areas and power lines marked. It is accompanied by a notice regarding safety and access from H. H. C.Williams, Construction Engineer. Page 12 An article referring to Tom Mitchell's stallion "Debtor" and Ernest Forras, Ski Instructor. Page 13: Continuation of Ernest Forras' profile. Page 22 Comment by Toni St. Elmo and the Myrtleford Ski Club Tow. ski history victoria, federation of victorian ski clubs, ernest forras, nissen ski school

.1 - Book - 4 pages, (brown paper) + card covers (brown printed matching brown on one side) - side stapled, titled "Cable Trams", published by the Science Museum of Victoria, Swanston St, at the time of the launch of the No. 1 cable tram set in the glazed display case 1/5/1975. Gives a description of cable tramways, a map, summary history, winding houses (power), the trams, cable, bell punches, grips, crews and "mind the curve". .2 - Program for the launch event and a list of speakers - Judge R. J. Leckie, F. R. Kirby, R. J Hamer and R. H. Fowler of the Museum. Also contains a pamphlet for the Science Museum of Victoria. Two copies held.trams, tramways, cable trams, science museum, displays

1 - Copy of letter from F Sanders to Secretary MMTB advising of Scout event at Como Park, requesting extra tram service. 2 - Copy of letter from unnamed manager to Mr FRG Sanders, General Secretary, Boy Scouts Association, regarding inability to provide extra tram services for Scout Week Celebrations at Como Park on 26 February 1946. Commonwealth restrictions, power restrictions and labour shortages prevent this from occurring. 3 - Memo titled "Scout Week Celebrations Camp Fire at Como Park, Saturday, 26th February, 1944 Commencing 8.15pm". Memo from Dist Traffic Supt SS to Mr McCutchan, Hanna St Depot & Mr Fisher, Hawthorn DepotPencil comments to Mr Harry to notetrams, tramways, events, parades, scout jamboree, hanna st depot, hawthorn depot

Black and white photograph of the conversion of the intersection of Domain Road, St Kilda Road, Domain Junction from cable tram to electric tram. Shows the Toorak Road Tram remaining trackwork, the temporary track for the electric trams with 276 inbound with the destination of North Coburg and another W class tram outbound to St Kilda Beach. Note the temporary platform and the temporary board crossing. Has "The Foundation Company Engineers and Contractors" sign in the view and the petrol? powered roller. Photo from the Collection of the Department of Infrastructure now with the Public Records Office - image number H101. Note: this photo is now out of copyright and was not an original VR photograph, but one copied from another source and collected as their Heritage series.Has Department of Infrastructure copy right stamp on rear and number "H513" in ink on rear and "2-5".trams, tramways, swanston st, cable trams, trackwork, new tramway, flinders st, conversion

Hand shears - also called blade shears - were used to shear sheep prior to the introduction of machine shears and are still used today where no power machinery is available. Hand shears consist of two blades with a hinge at the end furthest from the point. The cutting edges pass each other as the shearer squeezes them together and shears the wool close to the animal's skin. In 1892 Jack Howe an Australian shearer sheared 321 sheep in one day using hand shears. This record has never been broken. This pair was made by Burgon and Ball in Sheffield under patent number 294. Filed in 1865, this brand of shears has been in constant production since then, although this pair was probably made in the 1930s.Spring double handled hand shears for shearing sheep."HIND'S PATENT DOUBLE HOLLOW GROUND BURGON AND BALL PATENT NO. 294 (inside a shield with a crown on top) MADE IN ENGLAND"churchill island, hand shear, burgon and ball, shearing

This mikiphone has an approximate manufacture date of circa 1926. It is stamped in the interior with the maker’s mark of Palliard Cie (St Croix), who partnered with the patent owners, Nicolas and Etienne Vadasz for the large scale production of the mikiphones. A Mikiphone – or Pocket Phonograph is one of the earliest versions of a portable music player. The Mikiphone was small enough to fit into a pocket for portability, and once unpacked had the ability to play 10” records. Power was supplied to the unit by a small hand crank, and sound was amplified by a small resonator. It is estimated that 100,000 to 180,000 of the units were made between 1924 and 1927. Luxury editions were also available with either a gold or silver casing. Le Corbusier is quoted as saying he could ‘see in the Mikiphone the essence of Esprit Nouveau’. The pocket gramophone is significant for historical and social reasons. It is primarily an enabler of leisure activities due to its portability and size. The design of the object is also significant as it showcases design advancements in the early part of the 20th century. The Swiss made "Mikiphone", the smallest talking machine ever placed on the market folded up to the size of a large pocket watch or small cheese case. Production stopped in 1927. A total of 180,000 were made. A few were made in a luxury version with gold or silver case for a "Pretentious clientele".Inside on dial: Mikiphone / Pocket Phonograph / Swiss made / System Vadasz. Outside: Pocket Phonograph / Mikiphone / System Vadosz / Patented in all countries.pocket phonograph, mikiphone, gramophone, pocket, music player, swiss made, switzerland

Until 1925 Beech Forest saw three trains or six train movements each day, from 6.50,am until 3.05 pm, and the railway personnel reflected this movement. A Station Master, porter, goods clerk, train crew, engine cleaner and track gang were employed. While economic activity slowed a little bit after this it still remained vigorous for another three years. However, the frequency of goods trains started to decrease from 1926 when the small NA class locomotives were partly replaced by a Garratt engine that had greater hauling power. Three regular train services continued to run each day, two of these being NA drawn and the other a Garratt train.B/W. Beech Forest Railway Station, a group of two men and a single man standing outside. On No.2 Road an NA locomotive, the single man watching. On No.3 Road a line of NQR open wagons.beech forest; railways; loco na;

In 1974, this 18 foot (5.5 meter) diesel-powered workboat was one of the last boats built to operate from the pilot cutter Wyuna. These boats were used to transfer pilots from the Wyuna to the ship being serviced or vice versa. Until 1946 they were propelled by two oars then simplex two-stroke petrol engines were fitted followed by diesel engines. The Pilot Service Shipwrights built the boats in a shed which stood on the site of the present Pilot Station, Tobin Drive, North of Shortland Bluff. The design is based on a Gig and was developed by the Pilots as suitable for the severe conditions at the entrance to Port Phillip. To understand how these boats were used view the film "Through The Rip" on the video in the Exhibition Hall.Close association with QueenscliffTimber Workboat used to transfer pilots between Wyuna and ship requiring servicepilot service, wyuna, workboat, boat buiding, port phillip sea piots

Arthur V Gregory b.1867, d.1957 worked from studio at 326 Albert Road South Melbourne established by his father G F Gregory in 1852. FALIE operated for many years as a cargo ship, largely around South Australia where it formed a strong regional association. During World War II, FALIE was requisitioned by the Royal Australian Navy for service, and was on patrol off Sydney Heads during the mini-submarine raid on Sydney Harbour in May 1942. After the war it returned to commercial service and was retired in 1982. It was then the last working ship representing the South Australian ketch fleet, and along with NELCEBEE ( HV000419) one of the last two working sail powered cargo vessels in South Australia.Water colour painting in painted gilt frameFalie off Cape Schank A.V. Gregory 1934falie, a.v. gregory, water colour, painting

Patsy Coverdale wrote on about the artwork which is found with the bedspread "This trousseau bedspread commemorates a century of our daily living, of four generations, a bedcover where many loves and lives have begun and ended. Once immaculate, its years of service, of blood, sweat and tears, have seen so many building washes that today's embroideries would shrink from. I rescued it, patched its tears and wears with needlework from ancestors and aunties to celebrate the International year of Women in 1975. It symbols include the IYW to the left, women's work and its rhythms and cycles, a pearl button for our pleasure centre. The male phallic symbol illustrates the organ's early development and its natural power with the energy of relativity behind it all."A quilt made for the centenary of the Hospital made for the International year of women 1975. Re-purposed from a quilt used at the hospital. Given to QVWC in 1997 for the grand opening. textile art, centenaries, hospitals

This engine turned belts to power battery operation. Used from C 1910-1920, some are parts missing. 'Tangye' had offices in Sydney.The first gas engine, a 1 nominal horsepower two-cycle type, was sold in 1881, and in 1890 the firm commenced manufacture of the four-cycle gas engine. Incorporated as a limited company from 1881, in 1894 they produced their first hot bulb engine.[2] Richard Tangye was knighted in 1894. After the deaths of Richard (1906) and George (1920), with the family owning the majority of shares, their sons entered the business.[2] In 1919, the company started production of large-scale industrial diesel engines, pumps and hydraulic equipment. Engine production was stopped after World War Two. A Tangye 35HP suction gas engine. (incomplete). Large green cast iron engine sitting on large white concrete block, with inscriptions on both sides. The green engine has 3 outlet/inlet pipes and joins onto one belt wheel; belt wheel joins onto another belt wheel which is sitting on another white concrete block."Tangye/patents/birmingham"

James Reid was born in Scotland near Glasgow and came to Victoria as a young man in 1854. Shortly after arriving he came to Bacchus Marsh where he lived until his death in 1902 at the age of 74 years. For most of these years he conducted a wheelwrights and coach builders business in Bacchus Marsh. In the nineteenth and early twentieth centuries, wheelwrights and blacksmiths played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, wheels and other components of vehicles for transport, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll' The photo shows a plain brick house with a central front door with a window on either side. There are a further two windows along the side of the house. On the left-hand side of the building there is a smaller room with its own entry door. The main roof is tiled with shingles or slate and features two substantial chimneys. At the front of the house stands a young woman with her hands clasped. A horse can be seen at the rear of the house. From the photo of the James Reid Wheelwright and Blacksmith Shop, Victorian Collections No.VC 618, we know that this house stood to the rear of the workshop. The wheel tracks which can be seen lead out to Main Street. On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE houses bacchus marsh, stevenson and mcnicoll 1883 photographs of bacchus marsh and district, james reid 1828?-1902, wheelrights bacchus marsh

Stevenson screens were first introduced in Australia in the 1880s and were widely installed by 1910. The screens have been used to shelter and protect thermometers and other meteorological instruments from rain and direct heat while the holes and double-louvre walls allowed air to flow around them. Sometimes other meteorological instruments were included in the weather stations, so there were different Stevenson Screen sizes. This authentic, original Stevenson screen was previously owned by the Australian Bureau of Meteorology and was used for many years for weather readings at the Cape Otway Light Station in southwest Victoria. The Lighthouse Keepers recorded the readings for minimum and maximum temperatures at 9 a.m. every day from January 1865 until April 1994. The equipment was sheltered in a Stevenson Screen from 1902 until April 15 1994, when the mercury thermometer was replaced by a platinum resistance probe within an Automatic Weather Station (AWS). This Stevenson screen is one of the two screens that then became redundant. The other Stevenson screen was kept to display to visitors. Lightkeepers were no longer required at the Cape Otway Light station either, due to the automated system. The meteorological instruments donated with the screen were used for measuring temperature and humidity. They are mounted on a metal bracket that fits across the screw holes on the screen’s internal frame. The glass-covered Relative Humidity (RH) sensor was made by the renowned precision instrument maker, Rotronic AG of Switzerland, which was founded in 1965. The firm made its first electronic temperature and humidity instrument in 1967. Meteorological records have been collected in Australia from the 1800s. The records were collated, published and used as a basis for weather forecasts. Many sectors, such as maritime and agriculture industries, have relied on these figures for making important decisions. The quality and placement of the meteorological instruments used to measure temperature and humidity are of utmost importance for accuracy. In early colonial times, there were no national standards for meteorological instruments that would allow for accurate figures and comparisons. Once the Bureau of Meteorology was established (around 1908 to 1910) the department installed Stevenson screens throughout Australia, many at lighthouses and light stations, and the measuring instruments were standardised. The Stevenson Screen was named after its inventor, Scottish Civil Engineer Thomas Stevenson (1818-1887) who was also the father of Robert Louis Stevenson, author. Stevenson developed the small thermometer screen around 1867. It had double-louvred walls around the sides and a top of two asbestos sheets with an air space between them and was thickly painted with a white coating that reflected the sun’s rays. This design was modified in 1884 by Edward Mawley of the Royal Meteorological Society. Standards were set for the locations of the screens and instruments, including their distance above ground level and the direction the door faced.Stevenson screens played a significant part in providing a standardised shelter for all meteorological instruments used by the Australian Bureau of Meteorology from about 1910 until 1994. The readings from the instruments gave the meteorological statistics on which weather forecasts throughout Australia were based. This Stevenson screen was used locally at Cape Otway, along the Great Ocean Road in southwest Victoria, so contributed towards our local forecasts and weather warnings.Stevenson screen, original, from the Australian Bureau of Meteorology’s weather station at the Cape Otway Lighthouse. The screen is a white wooden cupboard with a slanted cover raised above the top. The top has ten drilled ventilation holes, and the sides and door are made of downward-slanting double louvres. Two brass hinges join the door to the lower edge of the screen and a metal fitting at the top edge allows for a padlock closure. The screen is supported on four short legs, each with a hole drilled from side to side for fitting to a frame. Inside the screen are two wooden frames fitted with hooks and screws. The floor has three boards; one across the back and one across the front at the same level, and a board wider than the space between these boards is fitted higher, overlapping them slightly. Inside the screen, a pair of electronic instruments with short electric cables is mounted on a metal bracket with drilled holes in it. One of the instruments is a Relative Humidity (RH) probe. It is 26 cm long and is a glass tube with a filter on one end and an electrical connection on the other. It has inscriptions on its label, showing that was made by Rotronic AG, Switzerland. The other instrument is a Resistance Temperature Device (RTD) thermometer. It is 22.5 cm long and has a narrow metal probe joined to a hexagonal metal fitting. A brass plate on the front of the screen has impressed inscriptions. The screen is Serial Number 01/C0032, Catalogue Number 235862.Stamped into brass plate "CAT. NO. / 253862 / SERIAL NO. 01/C0032" On instrument’s electrical fitting; “CD2” [within oval ‘+’ above S] “Serie693 op65 / 220/380V~16A” On instrument’s glass; “rotronic ag” “SWISS MADE” “CE / CH-8303 / Bassersdorf” Symbol for [BARCODE] “ART NO MP 101A_T4-W4W” “POWER 4.8.30VDC“ “OP. RANGE: 0-100%RH/-40+60° C” “OUT H 0-100% 0-1V” “OUT T -40+60°C -0.4..+0.6V” “SERIE NO 19522 009”flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, cotton region shelter, instrument shelter, thermometer shelter, thermoscreen, thermometer screen, measuring instruments, meteorological instrument, weather recording, weather station, lighthouse equipment, light station equipment, stevenson screen, marine instruments, mercury thermometer, platinum resistance probe, aws, automatic weather station, rotronic ag, swiss made, meteorological device, weather forecast, weather prediction, weather records, meteorological forecast, meteorological record, australian bureau of meteorology, bureau of meteorology, bureau, bom, relative humidity, rh, relative humidity probe, resistance temperature device, rtd, thermometer, temperature, humidity, cape otway, cape otway lighthouse, cape otway light station, rotronic, switzerland, swiss instrument, thomas stevenson, double-louvered walls, edward mawley, royal meteorological society, 01/c0032, serial number, cat. no. 235862, serial no. 01/c00323