0-6-2 Tank Locomotive No.1 "Delta" Gauge 2'0" Identification: 1 Delta Type: 0-6-2T Builder: Perry Engineering, Mile End, South Australia Builder's number: Perry 7967.50.4 of 1950 Building date: 1950 Current status - Static Exhibit Wheel Arrangement 0-6-2T Cylinders (Diameter X Stroke) 10 inches X 18 inches Boiler Pressure 180 psi Driving Wheel (Dia.) 28 ½ inches Weight 16 tons Coal Capacity 27 cubic feet Water Capacity 500 gallons The Perry Engineering Co, Mile End, South Australia built a total of 18 locomotives for the 2’0” gauge tramways used by the sugar industry in Queensland. This 0-6-2T locomotive was built by Perry Engineering Co. Ltd. of Mile End, Adelaide as their Builder's No. 7967.50.4 of 1950. It was used at Qanaba Mill, Bundaberg where it was known as No.1 "Delta". / Qanaba Mill No.1 No. 1 “DELTA” 0-6-2 TANK LOCOMOTIVE Gauge: 2 foot Built by Perry Engineering Company of South Australia in 1950 (Builder’s number 7967.50.4), “DELTA” is a medium sized Australian designed locomotive featuring Walschaert’s valve gear driving piston valves. Weighing 16 tons (16.3 tonnes) it was one of the post-war narrow gauge steam locomotives, which worked in the canefields of Queensland until 1978. “DELTA” worked at various sugar mills in the Bundaberg area and was finally withdrawn from service at Quanba Mill after a life of 28 years. Obtained by the Puffing Billy Preservation Society in 1981. Delivered to Australian Estates Co., Kalamia Mill named DELTA in 1950. Purchased by Fairymead Mill as No 20 DELTA. Purchased by Millaquin Sugar for Qanaba Mill as No. 1 DELTA, 1970 Withdrawn from service, 1978. Obtained by Puffing Billy Preservation Society for display at the Puffing Billy Museum.Historic - Industrial Narrow Gauge Railway - Steam Locomotive used in Queensland in Sugar Mill service. Locomotive No.1 "Delta" - Steam Locomotive - made of steel, and wrought ironDelta0-6-2 tank locomotive no.1 "delta" perry engineering - puffing billy railway perry 7967.50.4 of 1950, puffing billy, qunaba sugar mill, bundaberg, perry engineering, delta, steam locomotive, 0-6-2 tank locomotive no.1

Copies of plans for Mount Helen E Building. mt helen campus, engineering building, mt helen e building, metallurgy, engineering, l.h. vernon and associates, architectural drawings

By referring to Cat No 7237.2 will bring up all items associated with Thompsons.This is a set of 3 sheets of steel tests on 6 PDR anti-tank gun tests. From Thompsons Engineering & Pipe Co. Lt Castlemaine to General Motors Holden, South Aust A/C Ministry of Munitions. 1. Barrel NRS 2483 - 2484 - 2498 - 2499 - Dated 1943. 2. Barrel NRS 1809 - 1812 - 1826 - 1827 - Dated 1942. 3. Barrel NRS 1876 - 1877 - 1859 - 1871 - Dated 1943.Signed off by (?) Martin.gun barrel tests, pdr anti- tank.

Print of a digital report - 13 A4 pages titled "Do Trackless Trams need stronger roads? - the "weight" of evidence", by James Reynolds. David Pham and Graham Currie of the Department of Civil Engineering of Monash University, dated Dec. 2021. Looks at the road pavement impacts of large heavy electric buses (known as Trackless Trams" and concludes that stronger road pavements would be need for them to operate on. Includes tables, photos of rutting in the Zhuzhou China example,trams, tramways, buses, trackless trams, monash university

Memento or Pen and Ink stand featuring a model of the Peckham Pendulum axle box. Made from wood and brass with space for pens and ink bottles, titled "The Peckham truck and Engineering Company Ltd London". Features a model of the Peckham axle box with rotated within the frame. See https://www.tramwayinfo.com/Tramframe.htm?https://www.tramwayinfo.com/Models/Howto/Trucks.htm accessed 7/7/2020 for some details.trams, tramways, trucks, peckham, models, souvenirs

Folder prepared by Commonwealth Engineering "Comeng" to document their tender offer for the future Z class trams. Includes drawings SCH9273 and 9274 giving an elevation and plan of their proposal, a coloured illustration which is based on PCC tram 1041, notes on the specification dated 11/11/1972, Duwag documentation and photographs, interiors, alternatives and suppliers. Does not include a formal tendered price. See item 7200 for the final contract document.Demonstrates the Commonwealth Engineering 1972 proposal for the contract for the Z class tram.Plastic folder with three interscrews containing the contract tender documentation for the future Z class tram. Includes a copy of the Tender Schedule for "100 All-Electric trams" in a front cover pocket and many loose items in a rear pocked, includes drawings, photographs and documentation. Has "Comeng" in gold block on the front. Folder by Arnold's plastics of Sydney.tramways, mmtb, z class, tenders, new trams, comeng, commonwealth engineering, contracts

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Due to recent pronouncements concerning Mining Engineering Education and the possibilities of other institutions wishing to introduce it, Brian Coles and Peter McCarthy submitted a draft outline of a proposal for a PGI Graduate Diploma in Mining Engineering to Derek Woolley.The outline of this was passed on to allow other to consider and comment on. It outlines the rationale, course structure, course content - core and options, student demand and resource implications. ".... view is that this course should be pursued in order that the momentum of mining engineering at Ballarat C.A.E be kept going". PGI - Post Graduate Institute.Four A4 pages - 3 typed, 1 with newspaper articleThe Weekend Australian May 7-8 1983 RMIT advertisementviosh, victorian institute of occupational safety and health, ballarat college of advanced education, derek woolley, director, brian coles, peter mccarthy, pgi, graduate diploma in mining engineering, post graduate institute, mining engineering education, proposal

Red hard cover book of 268 pagesnon-fictionseller plate, ewin's ballarat, war economy standard, combustion, engineering, thermodynamics, internal combustin engines, compressed air

Blue hard covered book of 157 pages.engineering, geoff biddington, a.s> plowman, limits and fits, gauging principals, screw threads, surface finish, industrial design

5 views of the old Engineering Shed/Machinery Shed refurbished 1983-1984. (1) Machinery Shed. (2) Now Chemical Storage. Where roller doors were has gone, now compost heap. (3) Old Carpentry at end, Mechanics Workshop to left of carpentry, next roller door is Machinery Shed/Grounds Workshop. (4) Inside Grounds Workshop (cages for storage). (5) Storage for tractor and equipmentengineering shed, machinery shed, chemical storage, carpentry, mechanics workshop, grounds workshop, cage, tractor, equipment

Volume 2: Working papers. This report is a review and appraisal of the Outer Ring Road Study Diamond Creek to Ringwood prepared for The Road Planning Liaison Committee by the Joint Road Planning Group for the The City of Doncaster & Templestowe and The Shire of Eltham by Loder & Bayly Planning & Engineering Consultants. "This paper attempts to set a framework for an evaluation of the recommended road link between Diamond Creek and Ringwood." Various perspectives are examined. Includes fold out maps.91 p, maps, 27 cm.melbourne ring road, roads, freeways

Report, single A4 sheet summary for periods showing the type of defects that change overs were made for W class trams, at each depot - titled - "MMTB - Engineering Department Running sheds Branch - Changeovers W class Trams - Form 3B" and hand written in ink on top of the sheet - "Depot summary form for crews to report tram defects". Gives some 36 reasons why a changeover may have occurred.trams, tramways, preston workshops, w class, reports, depots, faults

(1) Site Plan by Alexander Metherell Pty. Ltd. Job No BHC/1 Drawing No SP/3 dated Dec 1983. On reverse, Plan SP/3 Library - Boulevard." (2) 4 tracing paper copies with various annotations. (3) Tracing paper planting plan. (4) Coloured, laminated copy, Proposed Planting: Engineering Block and 2 sketches on tracing paper and paper. Also see B15.0352 for Full Report.alexander metherell, library

By referring to Cat No 7237.2 this will bring up all associated items with Thompsons.This is a set of nine pages of steel, marine engine parts and naval gun parts - testing. The sheets have the letterhead of Thompsons Engineering and Pipe Co Ltd., Castlemaine. The results are to the Commonwealth of Australia 1 - 4. Marine Engine Parts. Dated 1945- 46 5 - 6. 4" Naval gun parts tests. Dated 1942. 7. Corvette Marine engine parts. Dated 1942. 8. Breach blocks for CQF M4 XIX ?? Dated 1942. 9. Tensile & bend tests Steel. Dated 1942.steel testing, marine engine parts

By referring to Cat No 7237.2 will bring all items associated with Thompsons.1. Single sheet of paper. From Thompson's Engineering & Pipe Co Ltd to Ordnance Factory Maribyrnong. A/c Ministry of Munitions. Titled - mechanical tests - Test on 25 PDR Breech rings. Rings NR (1790-1793). Dated 26 March 1943. 2. Tensile tests on material for 95 (loose) Barrel forgings for 25 PDR Gun Howitzers. From Thompson's to Commonwealth of Australia - Ministry of Munitions. Barrel 14236/1 (Y2) - Barrel 635/3 - Dated 18 Feb 1942.1. Top has name "Mr. Johnson" written. In the middle is an unidentifiable signature dated 26-3-1943. Bottom has (??) Martin. 2. At bottom signed off by (??) Martin.25 pdr, thompson's castlemaine, ordnance factory maribyrnong.

By referring to Cat No 7237.2 will bring up all items associated with Thompsons.There are 8 sheets of test results for various heavy machinery. From Thompson's Engineering & Pipe Co. Ltd. 1. - 2. To C of A - Ord Factory Bendigo - Dated 1942 & 1943. 3. To Ord Factory Maribyrnong Dated 1944. 4. To Chas Ruwoldt Pty Ltd Dated 1945. 5. To C of A O.F.M (Maribyrnong) Dated 1945. 6. To Chas Ruwoldt Pty Ltd. Dated 1945 7. To Chas Ruwoldt Dated 1945. 8. To Ord Factory Bendigo. A/c Commonwealth of Aust. Dated 1945.Most have been signed off by (??) Martin. .5 has a red note - to be renormalised at 8.30c J. Adams 8/8/44.thompsons castlemaine, test results, ww2

http://www.archivingindustry.com/Indicator/chapterfour.pdfSteel steam engine indicator with accessories as shown ; velvet lined timber storage case 255mm x 220mm with brass hinges and latches. Additional information can be found online via: http://www.archivingindustry.com/Indicator/chapterfour.pdf Refer p. 4-23 [last viewed 20 May 2013][a] John S Bushnell & Co, New York Pat.Feb.20.1894 [b] New York Pat.Jan.19.1892 1257 bushnell, bachelder, spring indicator, engine indicator, wightman

For an explanation about the history of steam engine indicators, visit: http://www.archivingindustry.com/Indicator/contentback.htm [last viewed 20 May 2013]. For information about the Richards' Improved Patent Steam-Engine Indicator see John Walter's publication 'The Engine Indicator: a short history of the autographic patterns from 1800 to the present day' - available online via: http://www.archivingindustry.com/Indicator/chaptertwo.pdf Information on Casartelli, Manchester is also available online via: http://www.archivingindustry.com/Indicator/chapterfour.pdf Refer pp.21-22 [last viewed 20 May 2013]Brass steam-engine indicator 125mm tall - accompanied by four steel piston springs - and a wooden measuring ruleIndicator [a] Casartelli Manchester [b] 41 ; Ruler [a] 12 to the Inch [b] No.2 [c] Casartelli & Son Manchesterrichards improved patent steam engine indicator, casartelli manchester

Comb bound (brown plastic) report, manila card covers, approx. 10 pages, plus yellow sheets plus four folded drawings titled "Engineering Department - Planning Branch - Modal Interchange Investigations 1974 - 1975". Study looks at five possible modal interchanges: 1. - Box Hill Railway Station 2. - High St / Harp Road, Kew 3. - St Kilda Road / Park St / Domain Road 4 - Swanston St and Flinders St station 5 - Blackburn Railway station.In red felt pen on top right hand corner "(118)". Has stamp "Discarded from PTC Library 22 Oct. 1989" on front cover and the first sheet.trams, tramways, mmtb, tram stops, railways, domain junction, swanston st, flinders st station, blackburn

By referring to Cat No 7237.2 will bring up all items associated with Thompsons.These are typed copies of work documents. They are on a lightweight pink paper. They are from Thompson's Engineering to the Bendigo Ordnance factory, Naval Dept. 1. Dated 7 Oct 1942 for tests on breech ring billed in "D" steel contract MON1775. 2. Dated 13 Oct 1942 for tests on Gun metal castings 4"Naval Guns, and Class "D " stee4l for breech rings for 4" Naval Guns. 3. Dated 29 Oct 1942. Test on gunmetal castings. 4. Dated 4 Nov 1942. Tests covered by 3 particular contracts. 5. Dated 25 Nov 1942, For Mechanical tests on a spcific contract. 2.3. & 5. Rubber stamp of a signature - illegibleww2, cannons, manufacture

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. "It is always better as a matter of principle to remove the hazard from a design rather than subsequently develop safeguards for the design". This may not always be possible. This book looks at safeguard designs and applications, specifically in Engineering. Checklists for various situations are enclosed. This book has been written by Derek Viner - Engineering Department at BCAE and Consultant VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. A4 size book of 105 printed pages - spiral bound. Divided into seven sections by yellow paper. Yellow cover.viosh, victorian institute of occupational safety and health, ballarat college of advanced education, graduate diploma in occupational hazard management, es472 risk engineering, derek viner, safeguard designs, applications, checklists

Laminated colour photograph of the staff of the University of Ballarat Bachelor of Engineering course. Back Row: Ian McKee, Len Taylor 4th Row: Bill Vermeend, Roger Johnston, Zlatko Balazic, John Knowles, Malcolm Dorricott, Ewan Barker 3rd Row: Verna Barry, Colin Kline, Peter Reid, Bruce Cossins, Aleks Subic, Jeff Stewart 2nd Row: John McAllister, Graeme Hood, Marilyn Trahar, Aziz Albazzaz, Mounif Abdallah, Trevor Gourley Front Row: Heather Snibson, Jocelyn Parkes, Belinda Cronin, Sally Moxham, Sue Vinden, Turhan Cobanian mckee, len taylor, bill vermeend, roger johnston, zlatko balazic, john knowles, malcolm dorricott, ewan barker, verna barry, colin kline, peter reid, bruce cossins, aleks subic, jeff stewart, john mcallister, graeme hood, marilyn trahar, aziz albazzaz, mounif abdallah, trevor gourley, heather snibson, jocelyn parkes, belinda cronin, sally moxham, sue vinden, turhan coban, engineering

Colour photograph taken at Mount Helen of the Ballarat University College Bachelor of Engineering Staff. Back Rows: Peter Reid, Bob Goodbourn, Ian Pratt, Bruce COssins, Gerry Bushnell, Graeme Hood, Brian Chappell, John Uzelac, Robert Pyke, Brian Coles, Len Taylor, Colin Kline, Bill Vermeend 2nd Row: Norm Grose, Joanne Crosbie, Verna barry, Turhan Coban, Richard Croggon, Jeff Stewart, Aziz Albazzaz Front Row: Trevor Gourley, Marilyn Trahar, Debbie Coutts, Ray Martin, John McAllister, Mounif Abdallah, John Yearwoodcolin kline, engineering, peter reid, bob goodbourn, ian pratt, bruce cossins, gerry bushnell, graeme hood, brian chappell, john uzelac, robert pyke, brian coles, len taylor, colin kline, bill vermeend, norm grose, joanne crosbie, verna barry, turhan coban, richard croggon, jeff stewart, aziz albazzaz, trevor gourley, marilyn trahar, debbie coutts, ray martin, john mcallister, mounif abdallah, john yearwood, ballarat university college

Laminated colour photograph of the Ballarat University College Bachelor of Engineering Staff. Back Row: Bruce Cossins, Len Taylor, Roger Johnston, Gerry Bushnell, Ian McKee 3rd Row: Alek Subic, Peter reid, Graeme Hood, Brian Coles, John Uzelac, Malcolm Dorricott, Colin Kline 2nd row: Verna Barry, Marilyn Trahar, Turhan Coban, Richard Croggon, Jeff Stewart, John Yearwood, Bill Vermeend Front Row: Heather Snibson, Trevor Gourley, Ceceilia Morris, Jocelyn Parks, Ray Martin, John McAllister, Aziz Albazzazbruce cossins, len taylor, roger johnston, gerry bushnell, ian mckee, alek subic, peter reid, graeme hood, brian coles, john uzelac, malcolm dorricott, colin kline, verna barry, marilyn trahar, turhan coban, richard croggon, jeff stewart, john yearwood, bill vermeend, heather snibson, trevor gourley, ceceilia morris, jocelyn parks, ray martin, john mcallister, aziz albazzaz, ballarat university college, engineering

Report - Foolscap - approx. 144 pages, bound with sewn sections in a volume with hard covers with red cloth spine, titled "Australian & New Zealand Tramways Conference - Engineering Conference Melbourne - May 1954". Has an index - see htd5643i2.pdf Conference - Monday 24/5/1954 to Friday 28/5/1954. Transcript of the conference, opened by Mr Risson. Had attendees from Adelaide, Brisbane, Hobart, Melbourne, Perth and Sydney. Lists the attendees, mainly the Chief Engineers. Programme looked at both trams, buses, new developments, inspections, buildings and Perway (track) and research.trams, tramways, conferences, mmtb, chief engineer, tramways, buses, trackwork, trolley wheels, bearings

By referring to Cat No 7237.2 will bring up all items associated with Thompsons.These are four test results on 6 PDR Barrels. They are from Thompson's Engineering and Pipe Co Ltd. 1. Polster barrels converted from 6 PDR Barrels dated 16/ 11/ 43. To General Motors Holden Ltd. Polster barrels No's 3083- 3085, 3087, 3090, 3091. Signed off by (??) Martin. 2. Bofor Barrel converted from 6 PDR Barrel. Dated 25/11/43. To Ord Factory Maribyrnong. Barrell No. V1589/1. 3. 6 PDR Barrel No. 3243. Dated 8/12/43. To General Motors Holden Ltd. Signed by (??) Martin. 4. Bofor Barrel converted from 6 PDR Barrel Dated 10/12/43. To Ord Factory Maribyrnong. Signed off by (??) Martin.gun barrels, testing, ord factory maribyrnong, general motors holden