Walking sticks with carved snakes such as this one were very popular household items in the late 19th and early 20th centuries and were often given as presents to older men. They were novelty pieces of carving requiring considerable skill and patience and walking sticks were usually hand-made in those days. This walking stick has no known local provenance but it is a fine example of a hand-made household item of 100 to 150 years ago This is a piece of brown wood with the shaft of the stick carved to a smooth round shape tapering down towards the end and with a snake shape carved over the shaft from the same piece of wood. The head of the snake juts out from the shaft top and the snake has scaly patterns worked on its surface. The stick has a larger round knob at the top and a metal covering at the bottom. When the stick is held upright and twirled around it gives the impression of a snake coiling and moving up the stick. household items, walking sticks

Studio portrait of young lady in graduation gown in a wooden frame. Frame is made of wood and is of an irregular shape with decorative carvings surrounding the portrait. Decorative carvings were possibly painted gilt which has since largely worn away. Portrait is covered in glass. Portrait is of a young lady wearing a white dress with a graduation gown over it. She has a mortarboard with a tassel on her head with a large bow at the back and she is holding a scroll in her right hand. She has a locket around her neck and a brooch suspending a cross at her neck. Bracelets are on both wrists. The words Bartlett Bros Bendigo are printed on the bottom of the matte surrounding the photograph. Subject is probably either Mary or Kathleen Foster.Bartlett Bros Bendigophotograph, portrait, female

Emu eggs are perfect for decorating, painting or carving. Emu egg shells have multiple layers ranging from an inner white layer through to the dark green outer layer. The contents must be removed through a small hole (either tool drilled or poked with a needle). After the yolk has been blown out (scrambling the yolk first by poking with a needle will make it easier to remove), the egg needs to be washed through and left to drain dry. It can then be painted, carved, etched or decorated. Emu decorating is a traditional Aboriginal art. The carving of emu eggs by Indigenous and non-Indigenous people was popular in the late 19th century but production declined in the 20th century, partly due to the protection of eggs through legislation. This has been overturned in recent years with the development of commercial emu farms. In the period between the two world wars particularly, with the production of other Aboriginal artefacts for an outside market, the carving of emu eggs provided an important source of income for Aboriginal people in many parts of Australia. It was a widespread practice in the south-east and it was not unusual for Aboriginal people to decorate their own homes with carved eggs and other items created by themselves or community members, serving to affirm an Indigenous identity within the domestic environment. (ref National Gallery of Australia)This item is significant for its uniqueness and its aesthetic appeal.An emu egg which has been painted white and decorated with glued on cord/thread to make a pattern of flowers and leaves.emu-egg ornament handcraft

One of a set of display images thought to be produced by the Shire of Eltham c.1979-1987. Outdoor woodworking class in action at either the Eltham or Panton Hill Living and Learning Centre. In 1977 the Centre offered two other related courses: "Carpentry and Wood carving" and "Home handyman skills" - Living and Learning (1977)Illustrative of services provided by former Shire of ElthamColour photograph 20 x 29 cm mounted on green-painted chipboard 28 x 35.5 cm (string on back for hanging)Title printed on label adhered to board below photograph (replaced June 2017)living and learning centre, woodwork, class

The adze is an agricultural tool, similar to an axe, but the blade is affixed perpendicular to the handle. Used primarily for smoothing or carving wood, the adze can also be used as a hoe. This adze is missing its wooden handle, which may vary in length depending on their particular purpose and can be designed for one handed or two-handed use. Rusted, well worn, blacksmith made with bias on blade. No handle. An adze is a tool similar to an axe.adze, churchill island, farm, axe, tool, tools, blacksmithing, smithing, blacksmith

The adze is an agricultural tool, similar to an axe, but the blade is affixed perpendicular to the handle. Used primarily for smoothing or carving wood, the adze can also be used as a hoe. The wooden handles vary in length depending on their particular purpose and can be designed for one handed or two-handed use. This adze was made by Australian farming company, Hytest.Adze. Long, slightly curved wooden handle, with a steel arched blade perpendicular to the handle. Hytesthytest, adze, axe, tool, tools, farming, farm, churchill island

Removed by the Ringwood Town Hall when it was demolished in the 1968 - 1970. Donated to the Ringwood RSL.Wooden Honour Board from the Ringwood Town Hall. Ringwood District Roll of Honour 1914 - 1918. The centre panel headed “Died on Service” list 14 names. The side panels comprise of 4 columns of names containing 108 in total. The top section includes carving of Gumnuts with a circular panel including a tree and plough.

Axes and Adze are hand-held tool used for shaping and carving wood. Axes are designed for chopping and cutting, while adzes are designed for smoothing and shaping. Both tools have a similar shape and consist of a head attached to a handle. An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel.Used by woodworkers in the Kiewa ValleyA cast steel tool similar to an axe, with an arched blade at right angles to the handle, used for cutting or shaping large pieces of wood.adze, hand tool for woodwork, axe

This collection of photos is of President George Rennie and councilors W.H.Uren (M.L.A.),J.P.Spiers, J.Lester, James Baird,J.Dalgleish, J.King, J.Innes, C.Edmonston and Mr. H.Bregenzer (Secretary).and is for the council year 1885-86Original Historic Photo.Collection of photos Of President George Rennie and Councilors,1885-86.Sepia in colour and set in brown frame with decorative carving and inner edge light brown.Main mount is grey with secondary mount,lighter in shade, in shape of horse shoe which contains the photos.The central photo is surrounded by a shaped gold edging.In each of the four corners are painted heads of wheat.Presented by the President G.Rennie Esq. to the Ballarat Shire Council 1885-86ballarat shire council, president 1885 1886, rennie george esq

This early 1880s Mason & Hamlin reed organ was part of the original furnishings of the St Nicholas' Mission to Seamen's Church at 139 Nelson Place, Williamstown, Victoria. It was donated to the Williamstown St Nicholas Seamen's Church by the Joy Club for Fighters around the time of the opening of the church. The front panel displays the front and back of six medallions, showing the year and location of exhibitions that Mason & Hamlin participated in, adding perceived notability and prestige to the value of this organ. These medallions date from 1867 - 1881: Paris 1867, Vienna 1873, Philadelphia 1876, Paris 1878, Sweden 1878 and Milan 1881. MASON & HAMLIN Mason & Hamlin organ manufacturer was founded by Henry Mason and Emmons Hamlin in Boston, Massachusetts in the 1850s, making about 450 organs per year. By 1905 the annual turnover was around 10,000 instruments. The Cable Co. purchased the company in 1911, which in turn was taken over by the American Piano Co. in 1924. By 1927 the production reed organs had ceased. Mason & Hamlin, like many other manufacturers, publicised its instruments at county fairs and exhibitions. They were quick to advertise any awards they won, or even recognition for displaying at these events, by adding matching medallion decals to their products. JOY CLUB FOR FIGHTERS The Joy Club for Fighters was formed in Williamstown in 1940 to raise funds to support Australians fighting in Australia and overseas in World War II. Activities such as dances were organised in venues such as Mechanics' Institutes, and enthusiastically supported. Donations were given to several hospitals and other care facilities, and local fighters, for distribution to the servicemen. Items such as food hampers and cigarettes were amongst the tributes given. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen, an Anglican charity, has served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centr4es in over 200 ports world-wide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria the orgainsation began in Williamstown in 1857. It was as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’. Its location was an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981 and closely resembles the Williamstown chapel. The organ is historically significant for its creation, being circa 1880 and still in use in the 1960s. This organ is significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. The item is historically significant for its connection to the Joy Club for Fighters, a support charity for Australian servicemen and women of World War II. The connection of this item to the Mission to Seamen and to the Joy Club for Fighters highlights the strong community awareness of the life of people in the armed forces, their dangers and hardships, and their need for physical, financial, spiritual and moral support.Organ; reed organ, mahogany wood with decorative carving and colourful inlaid floral design. Has two pedals that are decoratively covered in floral patterned tapestry. Inscriptions are on the panel above the keyboard. Organ has five octaves and eleven stoppers. Made by Mason & Hamlin, America, circa 1881. This organ is part of our St Nicholas Seamen's Church collection."Mason & Hamlin" and below the music rest "No 113032" and other indiscernible print Medallions, left - right "PARIS, 1878." "SWEDEN, 1878." "PHILA., 1876." "MILAN, 1881." "VIENNA, 1873." "PARIS, 1867."flagstaff hill maritime museum and village, flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, great ocean road, religion, religious service, st nicholas seamen’s church, williamstown, missions to seamen victoria, joy club for fighters, musical instrument, reed organ, mason & hamlin, worship service, worship music

Frank Wright was a renoun resident of Smeaton, where he was born on 2 August 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia. He died on 16 November 1970.Black and white photograph of a man dressed in a light jacket and trousers, carrying a brief case. He is standing at the entrance of building with a wide doorway which has an ornate carving over the door frame. A light and dark chequer board tiled floor can be seen inside. Thick vine covers the outer wall above the door. The man is Frank Wright.frank wright, composer, adjudicator, musician

These items were in the Ballarat School of Mines Museum, and when the museum was closed they were saved from the tip, and returned decades later. The Alafolo or afui are anthropomorphic clubs found across the island of Malaita. As war clubs, blows were struck with the edges of the club, which varied in length from under three to four feet. At least some of these clubs served a largely ceremonial function, particularly those rare examples with shell inlay. Malaitans war clubs are usually made of tooa, a reddish hardwood. Most finished clubs are submerged in mud (saltwater or fresh) for about a month, during which time they acquire a glossy black finish.Two native weapons, probably South Pacific in origin. .1) light coloured timber paddle with carving. Possibly Solomon Islands. .2) A dark coloured Alafolo made with heavy ironwood, with geometric designs from the Solomon Islands with stylized face, carved geometric design at top end; two carved rings with geometric design between them toward bottom end.ballarat school of mines, ballarat school of mines museum, ethnographic, paddle, club, ethnographic material, new number, solomon island, alafolo, malaita, weapons, new guinea

This item was donated to the Moorabbin Historical Society in the 1980's by Mr John Herron of Bentleigh. It was brought back from the Boer War by Private W.F. Daff of South Brighton [Later Moorabbin] Private Daff served in the Second Contingent sent to the Boer War 1899 - 1902 South Africa.This item is of Historical Significance because it is linked to the Boer War [1899- 1902] and is of native South African origin.Mr John Herron is a descendant of James Jones an early settler in Moorabbin Shire and the Daff family were early settlers in South Brighton ( Moorabbin).A large natual wood pipe in three pieces with carved bone mouth piece.The bottom piece is on an angle so it stands upright. A hole is bored through the middle of the pipe at different sizes so the smoke is drawn up through the pipe slowly by the smoker.The carvings around the join for the top section of the pipe are very fine and delicate and extend up an over the join to camouflage it.boer war, daff w.f., pipe, native, moorabbin, brighton, south africa, bentleigh, herron john

These eggs could be ostrich eggs from an ostrich farm which operated just out of Marlo. It is likely that they were donated by Kate and Richard Earle who ran the enterprise. Emu and ostrich eggs are perfect for decorating, painting or carving. Emu egg shells have multiple layers ranging from an inner white layer through to the dark green outer layer. The contents must be removed through a small hole (either tool drilled or poked with a needle). After the yolk has been blown out (scrambling the yolk first by poking with a needle will make it easier to remove), the egg needs to be washed through and left to drain dry. It can then be painted, carved, etched or decorated. Emu decorating is a traditional Aboriginal art. The carving of emu eggs by Indigenous and non-Indigenous people was popular in the late 19th century but production declined in the 20th century, partly due to the protection of eggs through legislation. This has been overturned in recent years with the development of commercial emu farms. In the period between the two world wars particularly, with the production of other Aboriginal artefacts for an outside market, the carving of emu eggs provided an important source of income for Aboriginal people in many parts of Australia. It was a widespread practice in the south-east and it was not unusual for Aboriginal people to decorate their own homes with carved eggs and other items created by themselves or community members, serving to affirm an Indigenous identity within the domestic environment. (ref National Gallery of Australia)This item is significant for its uniqueness and aesthetic appeal.Two painted eggs on stands. 1907.1 is painted black and has white emus or ostriches painted on it. 1907.2 is painted white and has black emus or ostriches painted on it. Both stands are wooden with brass pedestals. The eggs are possibly ostrich eggs.handcraft emu-egg ornament ostrich-egg

Primarily a painter, Mandy Nicholson also produces ceramics, carvings, murals, prints, designs and children’s clothing. Born in 1975, Nicholson was raised in Healesville and belongs to the Wurundjeri-willam (Woiwurrung language) clan of the Kulin Nation. Mandy’s paintings often represent important cultural rituals and are executed in her distinct graphic style. She uses the traditional motifs of her people blended with contemporary interpretation.

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle is straight and the blade has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe or mattock used for agriculture and horticulture. Adze - smalltimber tools

This set of handmade tools was made by Jim Williams for his own purposes to make designs and components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This set of handmade tools is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This set of tools was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. A set of 6 small, fine wood working and carving tools stored in a ‘Craven A’ cigarette tin. The tools have been handmade by Jim Williams for the purpose of making ship models. This set of tools is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Also included is a spare handle.)On the tin; “CORK TIPPED / TRADE MARK / CRAVEN “A” / VIRGINIA / CIGARETTES”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, carving tools, handmade wood carving tools, craven a cigarette tin, sovereign of the sea, ship model, hobby, ship model tool

NoneAbstract image. Centre image is a human (shown without skin) climbing a narrow mound/hill form. At the top is a screen supported by three poles. The screen reproduces a photograph of what appears to be a classical narrative bas-relief sculpture. On each side of the hill are Celtic and Norse carvings/gilded artefacts/metalworks mounted on long poles. Abstract could patterns are at the top of the print. No matt. Silver metal frame.Front: 1/10 (lower left) Ikon to a Fossil King (lower centre) Allan Mann (lower right) (pencil) Back: (no inscriptions)

This organ in the Flagstaff Hill collection has a card under the hinged lid titled “The ‘Connoisseur’ Organ” and lists improvements, materials used in the components and directions for taking it apart; it is dated July 1883. Below this card is a printed label listing various Patents, dated; July 9th 1878 / Reissued December 10 1878 - plus September 10 1878 / April 15 1879 / October 28 1879. “The Smith American Organ Company was originally established by S.D. Smith and H.W. Smith as early as 1852. First known as the Smith American Organ Company, the firm was located in Boston and built high end parlour organs and melodeons. In the early 1880s the firm began building pianos and the name of the firm was changed to "The Smith American Organ & Piano Company". In 1889, the firm acquired The Regal Piano Company from the New England Piano Company, and the firm was known as "The Smith American Piano Company" by the 1890s. The Smith American Piano Company built and controlled the Regal Piano Company line until 1903. Many of the instruments by Smith American were also labelled as 'The Palace Of Music'. It appears that the Smith American firm went out of business in the first part of the 20th Century.” A significant item of musical memorabilia and regarded as a collectors item today. Reed organ (sometimes called a pump organ or melodeum). “Connoisseur “model, made by The Smith American Organ Company. Wooden piano-shaped musical instrument with carving and gold leaf decoration. Organ has keyboard, stops (16), shutters (10) above stop board, large foot pedals and a roll back keyboard cover. There is evidence of something being attached either side of the shutters (candle bracket?). Attached inside hinged lid are Directions and Patent information of The Smith American Organ Company, Boston MASS. USA. Label is dated July 1883. Lettering in gold across front of organ “CONNOISSEUR”, “SMITH AMERICAN - - -“ and “ORGAN - - M - - ANY”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, great ocean road, harmonium, organ, piano, musical instrument, music, entertainment, connoisseur organ, reed organ, parlour organ, smith american organ company

Handwork for Schools by W.R.Dean and H. Jolly. 1953 Reprint. Book has light blue cloth cover with black printing. Back cover has part of the jacket which is light brown with dark red and blue printing and decoration pasted on it. Subjects covered are: Modelling and Carving; Pattern and Decoration; paper and Cardboard Handwork; Printed Decorations; Weaving; Handwork in Wood; Other Crafts; Decorative Needlework and PuppetryGeoffrey Cumberlege, Oxford University Press, Melbourne. Wellington. Brown, Prior, Anderson Pty Ltd., 430 Little Bourke Street., Melbourne, C.1.education, primary, golden square laurel st p.s., golden square laurel street p.s. collection - handwork for schools, w r dean, h jolly, geoffrey cumberlege, oxford university press, j mcrae, g s browne, a h ramsay

Ann Dale (nee Lees) was given this frame by her younger brother Thomas Chamberlain Lees, who was eighteen at that time. Thomas was the youngest son and seventh child of Lees and Sarah (nee Chamberlain) Lees. Ann loved her little brother’s artistic talents, which are demonstrated in this frame he designed and carefully carved for her. Thomas had cleverly finished the back with timber pieces around the images, and a section of a 1904 calendar. His “GOOD LUCK” is below the image of Ann, her husband Ellis Dale and their five children, c 1900. Sadly, Thomas died in 1911, aged 25. Ellis Dale’s father, William, was a quarryman who sailed from Yorkshire to Australia in 1852. He later bought land for Dale’s Quarries on the edge of Warrnambool in the area of Dale and Aberline roads. From the age of about eleven, Ellis and his brother worked in the quarry beside their father. In 1890 Ellis Dale married Ann Lees. Ann had lived nearby at Wangoom with her parents, Lees and Sarah Lees, who had had her photograph taken when she was a little girl, wearing her black dress. Ellis built a bluestone cottage for himself and Ann on his father’s land in Dales Road. He later added weatherboard rooms, and they named their finished home “Latrigg”. Early in their marriage Ellis recycled some empty dynamite boxes from their quarry to build a cupboard with drawers for Ann’s flat irons and other ironing equipment. The cupboard was used by future generations until recently, when Ann’s granddaughter, Betty Stone, donated it as part of the Chamberlain Dale Lees Collection. It is now in the kitchen of the Port Medical Office. Chamberlain Dale Lees family – local Colonial Pioneers Centre: Ellis Dale and Ann (nee Lees) and their five children - c 1900. Sons lvor William, Robert Ellis, Alfred John, and daughters - Elsie Mary Dale, and Daisy Elvena Dale. Top Left: Ann Lees - c 1868, (the little girl in the black dress) Top Right: William Dale Jnr. and Ellis Dale - c 1871 Lower Left: Ellis Dale and Ann (nee Lees), married 22 Jan. 1890 Lower Right: William Dale Jnr. and Agnes (nee Gillies), married 1883 Oval Photographs: unidentified but presumed to be family members [NB Spelling of Ann Dale – The spelling of Ann’s name has been confirmed by Betty Stone as being “Ann” (Not Anne), by phone conversation with Flagstaff Hill Maritime Village, K P 14th April 2014] (Note: For additional information please refer to Betty Stone’s book “Pioneers and Places - A History of three Warrnambool Pioneering Families” ie. Chamberlain, Dale and Lees Families)This item is associated with the families of Chamberlain, Dale and Lees. These families are listed in the "Pioneers' Register" for Warrnambool Township and Shire, 1835-1900, published by A.I.G.S. Warrnambool Branch. The handmade frame is a unique example of clever craftsmanship and carving skills used by early pioneers with limited access to materials.Family photographs, nine, set into carved, solid wood frame, stained and lacquered. Carving includes leaves, flowers, a horseshoe and a ribbon with the words "GOOD LUCK" Photographs are of the Lees family of Wangoom, from the 'Chamberlain Dale Lees Collection’ Made by Thomas Lees for his sister, Ann. The little girl with black boots on is Betty Stone's grandmother. The back of the frame has a London calendar dated 1904.Words in carved ribbon "GOOD LUCK" Calendar for the year 1904flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chamberlain, dale, lees, stone, betty stone, warrnambool pioneers, thomas lees, wangoom, ann dale, ellis dale, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chamberlain, dale, lees, stone, betty stone, warrnambool pioneers, thomas lees, wangoom, ann dale, ellis dale, thomas chamberlain lees, handmade photograph frame, carved photograph frame, dynamite

Photograph shows a tree carving on the esplanade adjacent to the Torquay front beach based on the figurehead of the barque Inverlochy, a Scottish trading ship wrecked off nearby Anglesea on 8 December 1902. The original figurehead had been saved and mounted on a flagpole at Torquay but it disappeared in the 1950s. In 2001-02 local sculptor Mark Trinham carved a replica image of the figurehead into a 80 year old dead cypress tree on the site of the original flagpole. The Inverlochy was one of many ships that ended their seafaring days on the south coast of Victoria.Black and white photographtorquay victoria, wreck of the inverlochy, wood carving

Made at the internment camps, during WW2 by the internees. This one was made to celebrate the first anniversary of their internment. Only 20 copies were made and this one is number 17. Contains program for the celebration, a water colour of the huts done, list of the board of lecturers, a black and white postcard of the carving of the Arandora Star memorial, a poem "Rubbish" by Volkmann, a description of what is and what represents the Collegium and a sketch entitled "turning his back" by Kurt Winkler.Soft cover of brown paper with title of booklet in black ink on front.Collegium Taturense Anniversary 1941 - 1941 (picture of an own and cockatoo sitting on a twig under which is written "eppyr si mvove"ww2 internees, collegium taturense, arandora star memorial, poem rubbish, volkmann, kurt winkler, turning his back, 1st anniversary internment, captain macinnes

Built in 1923-1927, the school is the gift from the children of the state of Victoria, Australia, to the children of Villers-Bretonneux as proof of their love and good-will towards France. Twelve hundred Australian soldiers, fathers and brothers of these children, gave their lives for the heroic recapture of the town on April 24th and 25th, 1918. On the front of the building there are two plaques (one in French and one in English) referring to this. In the School Yard, as well as an Aboriginal style mural created by the students of the school and inaugurated on ANZAC Day 2009, is an inscription over the porch on a green background in yellow writing saying : DO NOT FORGET AUSTRALIA Due to the strong bond of friendship between the Australian population and the inhabitants of Villers-Bretonneux. This message expresses the need to remember and show gratitude. Also situated in the school is the Victoria Hall, with its wooden paneling, co-ordinated by the Ballarat Technical Art School with most of the carving being undertaken by Australian sculptor John Grant of Daylesford Technical College in Victoria. The carvings represent fauna and flora from Australia. (http://www.museeaustralien.com/en/?Victoria_school, accessed 04/02/2014)Photographs of each of the Pilister at Victoria School, Villers Bretonneux. Each pilister is carved with an Australian Animal.villers-bretonneux, ballarat technical art school, victoria school, victoria hall, world war, world war 1, australian animals, possum, cockatoo, kookaburra, platypus, lyrebird, koala

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle of this adze is shaped like an axe handle and the blade also has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe used or mattock for agriculture and horticulture.Adze - Largetimber tools

The attached card states - 'Mother's knitting stick'. There is a brass hole one end with four brass nails where the tip of a knitting needle is inserted for support. The curved and fits into a belt or tape around the waist. Knitting was carried out on curved metal needles, one of these needed to be kept rigid by being held between the hand and knitting sheath held at the side of the body either tucked into a belt or held under the armpit. The sheath would allow someone to to knit with one hand whilst performing chores with the other. They also took the weight of the work and stopped stitches from slipping off the bottom of a double ended needle. Many were given as love tokens but there were plenty made by men for their daughters or other close family members.An antique curved carved wooden knitting stick or treen Knitting Sheath for hand knitters. It is approximately 23cm (9 inches) long with simple carving on one side of M H R in large letters as well as a nine pointed star next to them. There is a brass hole one end with four brass nails where the tip of a knitting needle is inserted for support. The curved end fits into a belt or tape round the waist. 'M H R' and a 'nine pointed star' is carved into the curved part of the stick . There is an attached card - 'Grandma's (crossed out) Mother's knitting stick. When using four needles the "working" one goes into the hole at the brass end of stick. Curved end fits into belt or tape round waist'accessories, knitting equipment, knitting

Events, Y.M.C.A., Y's Workbox, Display & Demonstration of Unusual Crafts, Sunday October 28. 1984, at the YMCA Stadium, Mundy Street, Bendigo, 10am-5pm.Crafts including; Bobbin Lace, Marquetry,Tatting, Leadlighting,Vietnamese Wood Carving, Decoupage,Model Vintage Cars,& Tanks,Embroidery,Pen Etching,Material Mats, Ribbon Flowers,Wooden ''Dummies'',Machine Embroidery, Candlewicking on Calico,Wooden Dolls, Porcelain Dolls, & many more. C.Marrone.C.Marroneevent, exhibition, bendigo y.m.c.a.

Pons asinorum was the name given to a wooden carving made by road worker Finlay Munro in the early 1920s at Boulder Creek, on the old Princess Highway, between Orbost and Cann River. The carved face was said to mock the supervising engineer after an argument about putting the road alignment across a swamp that required new bridges. The Italian workmen had advocated for a different route to avoid the need for building new bridges across the swamp. This photograph is from a set of thirteen black and white postcards in a fold-out format.This is a photograph of an iconic tourist attraction which records the woodworking skills of workers in the early 20th century. The carving is no longer there.A small black / white photograph of a face carved into a tree stump.on front at bottom - ON THE ORBOST CANN ROADwoodcarving pons-asinorum boulder-creek-east-gippsland princess-highway