Government House, Melbourne was constructed between 1972 and 1876 to a design of William Wardell. The slide is significant as it represents the ceiling decoration of the State Drawing Room in 1979.One of six colour transparencies, purchased from John T Collins of interior and exterior views of Government House, Melbourne. This photograph (slide) is of the exterior of the tower."South Yarra Government House Tower J Collins 17-10-79"government house -- melbourne, john t collins

In this undated drawing, believed to have been done in 1925, an existing bluestone store was extended out into the courtyard area. The extensions were on the south and west elevations, and the drawing includes a floor plan of these areas. Noted on the plan is the removal of fireplaces that existed in this building, the location abutting the Alfred Hospital reserve and location of the motor room.1 architectural plan of extension to bulk storeStephenson & Meldrum, Architects 374 Little Collins Street Melbourne Phone: 6990 On the back: Widening of old bluestone store plans & specroyal victorian institute for the blind, plans

Manufactured in the 1960s, this mobile emergency telephone exchange was fitted into a caravan. Part of the Shepparton Division State Disaster Plan, the caravan could be towed to areas affected by disasters to enable communications to recommence. The caravan remained in service until approximately 1974.Mobile infrastructure plays an important role in Australian communications, owing to the often remote and hostile environments in which Australians live and work. Exchanges such as this facilitated phone calls in the aftermath of an emergency, particularly for hospitals, police and other emergency services. Today, Mobile Exchange on Wheels (MEOWs), Cell on Wheels (CoW) and Satellite Cell on Wheels (SatCOW) - which provide temporary landline and broadband services, mobile phone coverage and service in areas without communications infrastructure respectively - are a critical part of emergency response procedures for natural disasters such as fire and flood. Though technology has progressed, the need for rapid service in remote areas remains a present concern of the communications service providers in Australia. This mobile service infrastructure is historically significant as an early example of a service which has evolved over decades, yet is still needed today. The exchange, as a representative example of a vehicle which would provide early-response in a disaster, is socially significant as a facilitator of critical communications needs in devastated communities: access to emergency services and contact with family and friends. The exchange itself, intact from its period of use, provides an insight into technology of the 1970s.Mobile emergency exchange housed in a caravan trailer on 2 wheel base, duralin body, steel tow bar, Caravan divided into 3 sections; the exchange room; the relay room and the main frame room. The exchange room contains 3 switchboards, a folding table, cupboards, benches and switch rack (.1). table (.2), steel bar for attaching the table (.3), back boards of switchboards (.4-.6), switches (.7-.16), box of switches (.17). There is a wall phone magneto, 300 type handset on wall and 2 skylights with wire screens. .11? hat pegs and shelf; there are 2 fluorescent tubes for lighting, all in exchange section. The floor is covered with 2 tone grey tiles and there are wire mesh on outside of windows and a geometric curtain inside behind switch rack. There is a flywire screen door as well as exterior door. The relay room has a sectioned door so half can open at a time. Room contains a cupboard with folding bench top beneath a curtained window. The opposite wall has a bank of batteries and transmission condensers; there is a shelf above window, one fluorescent tube and fuse boxes. Tiles on floor also. The main frame room contains many metres of coiled black covered cable, a black covered magneto wall telephone with 300 type handset; grey plastic jumper cords, a rack of termination points and wire with wasp nests attached. There is a small iron step under door, a fluorescent tube on wall and 3 hat hooks. Roll of Paper Handtowels (.18), cord and handle (.19), red exchange cords and plugs (.20-.22), plastic aluminium runners (.23,.24), headset (.25,.26), logbook (.27), battery readings (.28), box containing papers circuit drawings etc (.29-.93), paper lists off wall (.94,.95). Books, record books etc (.96-.103). Manila folder (.104) containing circuit drawings (105-.124). Wooden drawer (.125), metal drawer containing subscribers master cards, record of faults cards, particular switchboards connected, Junction line cards (.126). Box of valves (.127), box of clamps (.128). Box of 2000 type rack fuses, red 1 1/2 AMPS, black 3 AMP, blue 1/2 AMP (.129). Box of sleeves for covering wire joints (.130), plastic beakers (.131,.132), soap (.133), box of white plastic squares (.134), time switch "Venner BF/43 time switch" Made in England (.135), box of bolts, knobs etc (.136), box of switchboard number indicators (.137), fuse (.138), fuse wire (.139), football card (.140). Box of cartridge fuse 6 AMP (.141). Envelope of drawing pins, rubber bands (.142), black plastic, paper tape centres (.143-.152), metal plug (.153), 2 signs "Beware of vehicles" (.154-.155). Paper listing Naringal East automatic conversion (.156). Green Commonwealth of Australia note pad (.157). Wiring plug for tail lights (.158). Black fuse plugs (.159,.160). Box of bolts (.161). 2 sections of blue plastic coated wires (.162,.163). Gloves used for working on batteries (.164-.167). Wasp nests (.168,.169). White fuse (.170). Photographs of van in use (.171,.172)..1 on front: "ANOTHER / MOBILETRAIL / PRODUCT" "MAX SPEED / 25MPH" "TRAILER BRAKES / --- / " On sides: "EMERGENCY TELEPHONE EXCHANGE" "NO 1" "PMG" "TCQ / GROSS 250 / TARE 182 / LOAD 162" "6" "COUNTRY BRANCH / NORTH REGION / [SHEPPARTON DIVISION]" "LAW'S SIGNS" "Telecom Australia" On back: "DANGER / LONG LOAD" "MQA 3787" .133: "FIR OIL" "AUSTRALIA"mobile telephone exchanges, mobile telecommunications trailers, trailers, transport, natural disaster, black saturday, bushfires, floods, emergency communications

This ink drawing is of old plans.

Original plans for the Mount Buffalo Chalet, framed architectural drawings for the Chalet, titled " Additions to Government Chalet Mt Buffalo. Dated 1909. Signed Jas G Spence & E F Leary. "Ground Plan, first floor plan, elevation, Section M5 and side elevation –beautiful coloured plan, hand price onit of £970, also called Drawing No. 1.Beautiful plan suitable for reproduction for graphic work." (Pg 45. Heritage Impact Assessment, September 2013. MGS Architects and McDougall & Vines, Conservation and Heritage Consultants) 'The Mount Buffalo Chalet opened in April 1910 as a remarkable Victorian State government venture into alpine tourism and recreation. Designed by Public works Department architect, George Austin (1860-1921)." (Pg 4 Historica, 2011). "The collection of ephemera builds on the Chalet's holding of archival material with a range of interesting, original items. Dinner menus., stationery., luggage labels, tickets, dockets and plans help to interpret the structured routine and social conventions of the Chalet that held sway for so many years." (pg 127 MBCC) These plans drawn were most likely to have been drawn upon recommendation by Government Tourist Officer, J.C.Boyce. John Newton (the Lessee) suggests the addition of 2 new wings (24 rooms) and creation of a billiards room. Treasury approved money for these extensions which were not completed until1914. Listed in Draft Inventory of Significant Collection Items. Four framed hand-drawn and coloured drawings / plans of the Chalet. Framed and mounted behind glass. 1: Dated 1911 -1912. 2: -dated 6th oct 1909 3: -Dated 25th Sept 1909. 4: -Dated 6th Oct 1909.Handwritten at the top of each drawing," Mount Buffalo / Wood Chalet"

In architecture a corbel serves a decorative as well as structural function as a solid piece of stone, wood or metal that is built into a wall and juts out like a bracket to carry a weight. The smoothly shaped corbel was formerly built into the external wall of the lighthouse facing the sea. It consists of two cupped, rounded forms, one bigger than the other, which are attached to a damaged flat base. Made of cast concrete, it is the same fabric as the lighthouse and shows evidence of white paint on its surface. An early architectural drawing of the tower shows the corbel as a projecting, decorative moulding underpinning the balcony floor associated with the auxiliary light. It indicates the original corbel was a much larger architectural feature which started as a solid rectangular block and terminated with a smaller block and then two tapering, rounded forms. Prepared in mid-1888, the architectural drawings for the lighthouse by Victorian Public Works Department architect, Frederick Hynes, were amended in 1888-89 to provide for an auxiliary light, which comprised an arched opening and door in the tower wall below the lantern room and small balcony. In the late nineteenth century all of Victoria’s lightstations installed a red auxiliary light to serve as a danger warning to mariners sailing too close to shoare. Existing lightstations, like Cape Otway, built a pavilion below their lighthouse facing out to sea, but newly constructed towers like Point Hicks and Split Point incorporated them into their designs. The efficacy of auxiliary lights became a controversial issue and all were discontinued on 1 January 1913. The Point Hicks balcony was removed from the face of the tower in 1971 after it was found to be badly rusted. This resulted in the complete removal of the corbel, from which the rounded moulding and part of the base survives. The auxiliary light and door were subsequently removed in 1975 and glass blocks now fill the opening. Cape Schanck Lightstation retains four cast iron brackets from its auxiliary light balcony which are currently stored in the lighthouse on the ground floor. No other architectural fabric associated with the auxiliary light has been identified at Point Hicks Lightstation. The fragment of corbel has first level contributory significance for its historic and architectural values as a relic of the auxiliary light and as an original moulding from the fabric of Victoria’s first concrete lighthouse.A masonary corbel.

Set of the three drawings of the Prahran and Malvern Tramways Trust (PMTT) Depot in Glenferrie Road, Malvern. 1 - Drawing No. 22 - Sheet No. 1 - Contract No. 8 - "Car shed offices and converter station buildings" - by Noyes Bros, dated 10/10/1909 2 - Drawing No. 23 - Sheet No. 2 - Contract No. 8 - Plan view of above - shows the first three roads or tracks within a larger building. Shows the room layout of the first depot building. 3 - Drawing No. 156 - Layout of Offices, car depot, and substation - c1920 - showing additional buildings, floor plans, extensions and the small four road workshop on the northside of Coldblo Road.Yields information about Malvern tram depot by the PMTT.Set of three prints on paper from a larger drawing reduced to A3 size.trams, tramways, depots, pmtt, malvern depot, drawings, noyes bros

Clour Ladscape Group Portrait: taken in Assembly Hall 4 rows mixed mal and Female. Burgundy card Cover.On Cover: My Class. Solid Line, Drawing of three Children in class room. Below Line ARTHUR REED PHOTOS A text and Drawing in Gold Inside: ARP ARTHUR REED PHOTOS SPECIALSITS IN SCHOOL PHOTOGRAPHY

This ‘heroic size’ reclining figure is a copy made from one of The Parthenon Sculptures currently housed at The British Museum, and thought to represent the river-god Ilissos. This piece was part of the Ballarat Technical Art School's collection of reference for art studies, and became affectionately known as 'Hercules' by subsequent student cohorts. The cast was likely made by Brucciani and Co. London, and part of a consignment delivered to the School during the 1920s. This cast replicates one of a number of relics acquired by Thomas Bruce, seventh Earl of Elgin and ambassador to Turkey, (Lord Elgin) in Athens in the early 19th century. (Hence, these works were sometimes collectively referred to as the Elgin Marbles). Ownership of the artefacts, once part of the 2,500-year-old Parthenon temple, is disputed by Greece. It maintains that Elgin removed them illegally while the country was under Turkish occupation as part of the Ottoman Empire. The items were sold to the British Museum in 1816 and have remained there ever since. The original "Ilissos" was located on the west pediment of the Parthenon in Greece, and was created in c435 BC. It is unknown if the statue was in position or had already fallen when removed from the Parthenon by Elgin. The Royal Academy London also holds a copy of this plaster cast. The Ballarat Technical Art School boasted a well-stocked Antique Room replete with plaster copies of classical, Renaissance and Gothic sculptural examples, which were used as drawing props by students. The school inherited some casts from its predecessor institutions, and further consignments were purchased during the 1920s, including full length, bust and relief figures, as well as dozens of ornamental and architectural casts. Unfortunately, much of the collection was lost or destroyed in the late 1950s.Quality examples of heroic sized plaster replicas are now rare, as many plaster collections were destroyed or lost when the copy of antique examples fell out of favour with art schools.Plaster cast used during Drawing classes at the Ballarat Technical Arts School. It is likely a headless depiction of the river god Ilissos.hercules, ballarat technical art school, elgin marbles, plaster, plaster cast, figure of a river god, parthenon marbles, ilissos, copy, drawing the human figure from cast, drawing from the antique, visual arts

Set of three photocopied plans or drawings on A3 sheet of Brunswick Depot - dated 30-6-1937 .1 - P8142 - Plan showing depot block and building plan .2 - P8144 - Detail plan of depot .3 - P8146 - Plan of Mess Room above depot offices / basement.trams, tramways, drawings, depots, property, brunswick depot

Set of five photocopied plans or drawings on A3 sheets of the "Port Melbourne Bus Garage" .1 - P8383 - Plan showing building layouts and adjacent land - including a Poultry Farm - dated 1938 .2 - P8416 - Plan showing parts of the adjoining properties including houses. .3 - Unnumbered - more modern architects drawing showing details of offices - c1944? - two sheets. .4 - unnumbered - drawing showing layout of repair shed, pits, offices and mess room facing Bay St. Copy of the map from Melway Street Directory No. 1 from Kevin Staines 24-2-2018 - added 9-3-2018. See image i6trams, tramways, drawings, depots, property, port melbourne, buses, maps

Set of 8 drawings, prints from original VR drawings of the Victorian Railways Sandringham Railway station, tram depot, bus depot and alterations between 1921 and 1958.\ .1 - VR Sandringham to Black Rock, Electric Street Railway – Car shed at Sandringham – Locality Plan – shows car depot layout, substation, track location for both the railway and tramway, including the platform, goods shed and coal stage. Not dated. Consists of two sheets of paper joined in the middle – 420H x 1210W. Minor creases at end of rolled sheet. .2 - Drawing 1907.21 - Sandringham car shed proposed extension – with note “Not carried out” – dated 2-8-21 Second copy has stamp – Drawer 2, Folio 1, plan 2 in bottom left hand corner. 480H x 630W .3 - Sandringham Station – station layout showing proposed extension to passenger platforms for both 7 and 10 car trains, buildings shops as the southern end of the yard, rail and tramway tracks, streets, dated 12.2.1923. Drawing 582.22. 420H x 590W. .4 - Locker Room for Bus Drivers – plan 264-46, dated 2-5-1946, 295H x 420W. .5 - Shower for Bus Drivers, Plan No. 815-50, dated 15/12/1950, 295H x 420W. Has a note on the drawing – “not carried out”. .6 - Tramcar shed – Site Plan – Entrance Gates – shows conversion arrangements of the depot from trams to buses, including entrance way gates. Plan 456-56. 295H x 420W. .7 - Conversion of sub-station into New Amenities Block - plan number 51-57, dated 22.2.1957 - Detail architectural drawings for the above work. 295H x 420W .8 - Conversion of sub-station into New Amenities Block - plan number 51-57, dated 22.2.1957 - Detail architectural drawings for the above work. 295H x 420W. .9 - Proposed Improvements to Bus Depot - Plan No. 455-52 - not dated. 420H x 595Wtrams, tramways, vr, sandringham, tramways, buses, railways, black rock

Tender document - single foolscap sheet - "Contract No. 92 Purchase and removal of WB Cottage Royal Park - Tender form". closing 7/4/1920. Notes cottage as four room, recently vacated by the Caretaker. No drawings provided. 2 copies held. .1 - single foolscap sheet for the purchase and removal of No. 41 Abbotsford St North Melbourne. Dated 1917.Handwritten notation in top right hand corner - "Board File"trams, tramways, tenders, contracts, mmtb, royal park, horse trams, zoo tram, north melbourne, abbotsford st

Plans of Basement, Ground Floor, First Floor, Second Floor, Third Floor, Fourth Floor, Fifth Floor and Roof. Gives the layout of each floor, room name and the use of each room, along with the assigned user. See item 7384 for a photo of the building.Yields information on the 1964 use and layout of the MMTB Head Office building.Set of 8 drawings or prints, secured by two Arnos fasteners at the top of the layout of the MMTB Head Office at 616 Little Collins St Melbourne.Each printed dated "18.3.64" in each bottom right hand corner in red ink.trams, tramways, mmtb, head office, plans, administration

Set of drawings for the MMTB Plenty Road extension in 1979, MTA extension to Bundoora in 1983 and the Latrobe Uni Modal Interchange - 1984. Large print – Aerial photographs Bundoora Tram Extensions Stage 2 – Albert St to Kingsbury Drive Stage 3 – Kingsbury Drive to Settlement Road Has been rolled, left hand edge damaged, right hand edge torn Compiled by the ROW Division – 2/1981. Has written on rear at right hand end “Bundoora Tram Extension – Official MMTB Plans” 760H x 1190W Plenty Road – MMTB Drawings – 12/1979 P15123 Tyler St to Walsal Avenue P15124 Walsal Ave t McColl St P15125 McColl St to Dorrington Avenue Bundoora Extension – Metropolitan Transit Authority – 2/1983 P15400 Dorrington Avenue to Barwon Avenue P15401 Barwon Avenue to Nicholson Ave P15402 Nicholson St to Barling Park P15403 Barling Park to Darebin Creek P15404 Darebin Creek to Scott Grove P15405 Scott Grove to Clunes Street P15406 Clunes St to Cash St P15408 Cash St to Bundoora Park P15409 Bundoora Park to Larundel Hospital P15410 At Larundel Hospital P15411 Larundel Hospital to Marne Court P15412 Marne Court to Cherrywood Court P15413 Cherrywood Court to Morwell Ave P15414 Morwell Ave to Grimshaw St P15415 Grimshaw St to Nickson Street P15416 Nickson St to McLeans Road John-Connell – Mott Hay and Anderson – Preliminary drawings for the Latrobe Modal Interchange – August 1984. 8094-A-20 Set Out Plan and Paving Details 8094-A-21 Elevations 8094-A-22 Sections 8094-A-23 Roof Plan and Stormwater Layout 8094-A-24 Canopy Details 8094-A-25 Toilet Block and Waiting Room 8094-A-28 Miscellaneous DetailsOn rear of aerial photograph sheet - at right hand end “Bundoora Tram Extension – Official MMTB Plans” in felt pen.trams, tramways, plenty rd, bundoora, latrobe university, mmtb, construction, mta

Laminated plan showing house plan, side and front elevations, for house plan for H. Lansell, Serpentine. Hand coloured drawings and floor plan. Edwardian style shows large house with maid's quarters, cellar, dining room, bedrooms, dressing room. On top of plan written in black pen Proposed Homestead, Albert Park, Serpentine, for H. Lansell Esq, scale eight feet to one inch, W. Beebe & G.D. Garvin, architects, late W. Beebe, Mitchell Street, Bendigo..bendigo, house, albert park, serpentine

Used by Colin Sach during his employment as Manager of the Chemistry Dept. at the University of Melbourne over a period of forty years.Manufacturing History Museum Victoria Commentary: Australian manufacturing history Philip Wollen Many years ago, when I was an ambition young man, I took over a company called Hecla.|This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good1'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good1'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Square metal box with electrical elements inside. Used to stand on or to put feet on when sitting. Elaborate pattern in centre with inscription.Hecla Foot Warmerdomestic items, heating

In the early 1900s, Mary Sweeney commissioned artist Charles Bertie to paint the main house at Culla Hill. He charged her 5 shillings for the picture and 18 pence for the frame She took this painting with her when she married Michael Carrucan in 1910 and it hung in the Dalton Street farmhouse for many years. At a later time (1960s), the Burstons (the then owners of Culla Hill) had a card printed from the painting. The original sketch was photographed in 1970 for reproduction in the Shire history publication Pioneers & Painters (1971). The very fragile original was kept in the Council strongroom and suffered significant damage to its edges over the years, no doubt it has also yellowed. A comparison of the original as digitised (2022) with the negative taken 50 years earlier also reveals that the left 20% of the sketch has been cut off, probably due to damage. In June 1842 Thomas Sweeney applied to the Superintendent, C.J. La Trobe, asking permission to purchase a portion of the recently surveyed ‘Parish of Nillumbik'. His request was allowed and handed to the sub-treasurer and Land Board. He paid £110 for 110 acres and called the land 'Culla Hill'. He first built a temporary house, a slab hut 12 feet by 10 feet, in which he lived with his wife, an Irish girl whom he had married in 1838. (His first wife had been drowned at Port Jackson.) Some time later he built a permanent residence on the model of a Tipperary farmhouse. It was a rectangular building of hand-made bricks and stone quarried from the Western Hill with a recessed verandah in front, and bore a slate roof. The out-buildings consisted of a detached kitchen, stable and a barn. It was in this house that succeeding generations of Sweeneys were reared. The original slab hut became a washhouse and survived till recent years. 'Culla Hill' became a social centre for the district, church services being held there on various occasions. The first wheat crop in the district was planted by Sweeney who also supplied the first grain for a mill that later was built at Eltham. He took an active interest in the development of the district. At this time travelling people--many of them runaway sailors or convicts--often passed the settlement, and some of them stayed and worked with Sweeney. A tribe of aborigines living on the river below 'Culla Hill' were apparently on good terms with Sweeney, for it is said that they helped him with the building of his house. Very little is known about the aborigines who originally lived in the Eltham district. There must have been many of them; their stone axes, grinding stones, and anvil stones have been found in the gullies around Research and canoe trees and artifacts were found on the Kangaroo Ground hills. Early settlers remembered a tribe that camped on the site of the present railway bridge at Eltham. They held corroborees there and visited settlers for hand-outs of 'flour and bacca’. There was an aboriginal reserve on the Yarra, upstream from Eltham, but most of those who had collected there later went to live on the Pound Reserve at Warrandyte, where the last aborigines in the area finally ended their days. The Pound Reserve, of 1,103 acres, was established at Pound Bend in 1841. The chief protector, George Robinson, and his four assistants, were given instructions to care for the aged and sick, to provide blankets and rations for all who lived there, to train the able-bodied men in agriculture and other trades and to find them jobs. The Yarra blacks, who later came under the protection of William Thomas, have been described as a 'fine race, well made and above the average height'. Thomas Sweeney died on 6 September 1867 and was buried in the Eltham Cemetery. To his wife Margaret and his son John, he left the entire property of 'Culla Hill'. To his other son Patrick, he left 150 acres, including a small two-roomed wooden cottage. He had five daughters: Kate and Margaret (twins) who were born in 1842, Ellen 1846, Annie 1848 and Johanna 1851. John Sweeney farmed 'Culla Hill' until his death in 1909. He had ten children; one of them, Mary, became Mrs M. Carrucan whose son, Mr John Carrucan, still lives at Eltham. 'Culla Hill' passed out of the Sweeneys possession in 1939 and was renamed by its new owners, 'Sweeneys', in memory of its pioneers. - Pioneers & Painters: One Hundred Years of Eltham and its Shire, Alan Marshall 1971, pp10-12 Original colour sketch artwork 4 x 5 inch black and white negative of original colour sketchculla hill, art, charles bertie, drawing, mary carrucan (nee sweeney), sketches, sweeney's cottage

Early form of home heating and because of the copper dish was considered one of the better models|Manufacturing History Museum Victoria|Commentary: Australian manufacturing history Philip Wollen|Many years ago, when I was an ambition young man, I took over a company called Hecla.|This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good.'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good.'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Pedestal radiator. Base is cast iron with three feet with rose design on each. Pedestal supports a copper spherical reflector plate which has an electrical connection box at its base. The connection box is joined to the pedestal by a screw and nut to enable the reflector to be tilted. The element is cone shaped and is in the centre of the plate. The element is protected by a wire guard.Hecla Firedomestic items, heating

Manufacturing History Museum Victoria|Commentary: Australian manufacturing history Philip Wollen|Many years ago, when I was an ambition young man, I took over a company called Hecla. This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good.'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good.'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Large electric heater with two radiator bars and a protective grille at the top and false coals at the bottom.Replacements for this fire - Elements No. F314 - Illuminators No. 3P. Berry's Electric Ltd - Volts 230 - 240 -Watts 2000 V/AD/Cat No. 454 . Made in Australia by Hecla Electrics Pty Ltd Melbournedomestic items, heating