Pair of two sheave wood blocks; the top block has wooden sheaves and metal straps with bolt thimble, and the lower block has an external metal strap with a forged one-piece ring on top and metal sheaves.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, 2 sheave wood block, wood block, block, marine technology, marine equipment, lifting equipment, ship rigging, rigging, sailing ship

This horse parade was held on Doveton Street North. Buildings in the background include Tattersal's Hotel and Smith & Power Shoeing Forge.building, public, streetview, commerical, hotel, horses, tattersal's hotel, smith & power, doveton street north

The Improved Martin-Adelphi Anchor. The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.Stock-anchor - improved Martins patent, Adelphi pattern improved Martins patent anchor, Adelphi pattern

Blacksmith Frank Healy at work at Alf Heal premises opposite Fire Station on corner. The last of the Shoeing Forges to operate in Stawell.stawell

Horse harness that connects a horse to a horse drawn vehicle 2 types 1. breast collar or breast strap 2. full collar or collar-and-hames. On either side of the collar are wooden or metal bars called hames.Used by farmers in the Kiewa ValleyShort knob top, forged hook, nut and bolt joint, loose rein ring, chain bottom, steel cased. They go on the collar and are made of two metal strips which take the full force of the pull padded by the collar.horse equipment, hames, horse collar

Used in the 19th century.A wide bladed forged steel Cooper's Adze head with a curved blade. There is no handle. At the opposite end there is a hammer shaped head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Hand forged metal tool, possibly a sailmaker's hook with the hook broken. It may be a fire iron. The twisted metal is a skill learned by a blacksmith.The item is a handmade tool, an example of the work of a blacksmith. Smiths were sought after in colonial Australia. Their trade allowed them to custom make work for the different industries necessary for survival in a new land.Sailmaker's stretching tool; long thin metal rod bent in half, with centre forming a handle or loop, and long ends twisted together to form a stem. The loose ends are formed together but appear broken.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, tool, sailmaker's tool, fire iron, blacksmith, twisted rod, twisted wire, sailmaker's hook

Oval photograph of James Parry blacksmith as older gentleman. James Parry owned General Blacksmith Shoeing Forge in Lower Main St. Stawell. James and his family lived in a house close to the business. Letters 6.9.1994 from grand daughter & 20.11.1995 Gwenyth Parry Peace ( Enquiry file Parry) states grandfather James Parry had a glass eye. The result of some flying sheet from his forge.Black and White Portrait Photograph of James Parry. The photo is in an oval shaped dark rectangular card. He is dressed in a suit, vest and bow tie and has grey hair and beard.Back of photograph, written John (crossed out) James Parry.stawell portrait

A forged steel fine tooth crosscut saw with no handles. There are four rivet bolts and two round handle holders at each end of the saw. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Forged by a blacksmith, Farrier's nippers are used to cut the hoof wall to the correct length for each horse and used to bevel the edge of the hoof before rasping. Blacksmith's made black iron complete. Split end one handle; knob end other handleStamped: "7"farrier, equipment, stable, equine, equine care, churchill island

This lead shot mould would have been used by those people wanting ammunition for shotguns. The moulds were probably originally used in a blacksmith’s forge. Although it has no known local provenance, this lead shot mould is of interest as an example of an early tool. This is a metal tool with handles in the shape of calipers with a rounded ball of metal at one end. The ball is split in the middle to allow molten material to be inserted for casting into lead shot. The object is heavily rusted.‘16’history of warrnambool, vintage tools

Workshop scene . Two workmen in a blacksmith shop with Forge Anvil and vice. Male on left Percy Ledger. Part of a set of photos of Wimmera Motor Works.stawell industry

This spanner, part of a raker/jointer/guage set which is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular spanner was part of a crosscut saw sharpening tool and method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back"This small spanner is part of the Raker/Jointer Gauge saw set and is made from forged steel. The nut grip is of the two tightening nuts on the main construction frame. See KVHS 0090 (A &B) for the other items making up the sharpening tools.hand tool, saw, sharpening method, tree felling.

These forceps belonged to the late Colin Noel de Garis. Also donated was a foetal scalpel electrode applicator- see donation form. There is a note that former honorary curator Peter Renou collected the donation. Peter Renou does not recall being involved in the donation.( Source: Grainne Murphy 15 November 2010.) This design of obstetrical forceps, with a screw in the handle, was introduced by George Thomson Elliot (1827-1871), a New York obstetrician. (Source: National Museum of American History, 'Obstetrical forceps') The 'sliding pivot' on the forceps was designed to prevent the compression of the baby's head. (Source: Elliot, GT, 'Description of a new midwifery forceps : having a sliding pivot to prevent compression of the foetal head, with cases', c.1860)"The Elliot forceps and its modifications (Elliot, Tucker-McLane, Tucker-Luikart) have shorter blades and an accentuated cephalic curve that is more suitable for a rounded fetal head that has not undergone extensive molding. In addition, Elliot instruments, because of their overlapping shanks, do not distend the perineum in the same way as the separated shanks of the Simpson-type forceps." (Source: Sakornbut, EL, 'Chapter 18 - Intrapartum Procedures', in Ratcliffe SD et al (eds.), 'Family Medicine Obstetrics', 3rd ed., 2008) Obstetric forceps, Elliot's. Consists of long shanks, made of forged chrome plated metal with metal handle, four finger grips, and distinctive screw and pin at the end of the handles. This screw functioned as a means of regulating the lateral pressure of the handles when in use. obstetric delivery

Used in the mid 20th century.A forged steel hatchet with an axe head, hammer head, nail puller and a lever hole. It has a short metal cased wooden handle with brass rivets. It was used as a trimming hatchet or axe in the mid 20th century. It is a 'Swordfish' brand, made in China.Inscribed with Swordfish brand Made in China with a picture of a swordfish. woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, hatchets, cleavers, tomahawks, wood

This Gotta brand 'cut-throat' razor was owned and used by Osborne (Ozz) Daniel John Hawkins Abbott of Albury, N.S.W."Cut-throat" razor in cardboard case"The Gotta Razor" printed on case; "O. Abbott" handwritten on case. "Finest stainless steel forged and real hollow ground in Germany" and "120 Gotta" inscribed on razor.cutthroat razors, razors

Don Walker was club professional at Heidelberg Golf Club 1936-1941. He died on active service in World War 2. The Don Walker Memorial Trophy is named in his honour.One of a full set of Don Walker golf clubs held at HGC.Metal shaft and head, leather grip.Inscription on head: "Don Walker. Rustless. Hand forged in Scotland. Mashie Niblick. No. 7 iron" The hand symbol is that of the Gorge Nicoll Company of Leven, Fyfe, Scotland.heidelberg golf club, golf clubs, golf professionals, don walker, irons (golf)

gold rush era historic building, social historyB/W photo, Crown Hotel, Buninyong, from Learmonth St. around 1905, shows some adjoining buildings inc. Caffrey's Shoeing Forge. Clearly shows original polychrome brickwork, full width iron lace veranda and tall flagpole.buninyong, crown hotel, learmonth st., warrenheip st, caffrey's shoeing forge

J. Parry General Blacksmith Shoeing Forge in Lower Main Street Stawell with four males and two horses out front. Opposite G.H. Robson Stone yards.Sepia photograph of front of store with four males and two horses in front of the building5 Main St Stawell. Found within a book sold at Ramsay's sale 18.9.70. Mrs. Ramsay was a Parry. Parry's workshop later occupied by Trend & Brown then Cas Brown. Now site of Grahams Store Lower Main Street.stawell business

owned by Mr John Greenwood, of Cox Street Port Fairysafety shaver in wooden case, containing directions for use, frame, seven blades, stropping machine, and blade holderFrame: Wilkinson/made in England . Blades: Wilkinson sword co ltd Hand forged made in England Reverse side: Wilkinson Special edge etched with a day of the weeklocal history, personal effects-toilet requisites, shaving, greenwood, mr john

21cm x 14.5cm black and white photograph of the bullock team in front of Thomas Phillip's Forge, Mrs Crossley's house, Dunrobin Castle owned by Mr & Mrs King. The bullock team is hauling cargo on a wagon stored in hessian sacks. The photograph is mounted on board. Written on the back: 110/12 Bullock Team Thomas Phillips Shoeing, Mrs Crosley, & Mrs Kings Dunrobin Castle. Chapter 4bullocks, forges, blacksmiths, cargo, transport

Used in the 19th century.A curved wooden handled adze with a forged steel head which has a wide cutting blade and a small 5cm steel knob on top. It was used by woodworkers for cutting and trimming rough wooden planks and shaping ans smoothing wooden surfaces in the late 19th century.woodworking tools, wood, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Reproduction Model Mining Cage. This item is constructed of wrought and forged flat iron. It clearly displays how the breaking mechanism of a mining cage is created so that if the tension is released from the support cables , the cage 'locks' on to the side rail (Skid). (see Research Tab)gold mining, miners' safety cage

18cm x 12.5cm black and white photograph of the buildings at 67 and 69 Sydney Street. Pictured is Cuts 'n' Curls, Ye Olde Blacksmith Shoppe and a Milk Bar. The forge is housed in a scrappy looking building with mis-matching corrugated iron roofing and rendered walls. storefronts, shopfronts, retail stores, hair salons, hair dressers, forges, milk bars, blacksmiths

This cut-throat razor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Cut-throat razor, part of the W.R. Angus Collection. Razor model No. 42, steel blade, in dark cardboard box, with bone handle, arrow shaped end; blade swings inside the handle. Razor made in Germany with blade made in Sheffield, England, in early 1900’s.Embossed on box "No. 42 / DES GERMAN MANUFACTURE", on handle "GOTTA", on blade "HAMBURG RING / REG. GOTTA REG. / SUPER FINE" and "FINEST SHEFFIELD STEEL / FORGED AND - - - HOLLOW / GROUND IN GERMANY" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, cut-throat razor, gotta razor, german made razor, personal effects 1900's, grooming equipment 1900's

Robert Charlton conducted a blacksmith, wheelwright and farrier business on the corner of Evans and Station Street, Sunbury from 1918 to 1940. The copy was taken from a photograph displayed in Mick Walsh's garage which is now on the above site.A black and white photograph of two sheds. A weatherboard shed with corrugated iron roof is on the LHS and the corrugated iron building is the blacksmith's forge and wheelwright's workshop. Two men are standing in fron of the large doorway. An advertisement for Dr. Morse's Indian Root Pills is written across the roof and 'BLACKSMITH' is painted on the wall.blacksmiths, wheelwrights, coach builders, advertising, charlton, robert w., walsh, mick, petrol station, station street, evans street, sunbury, george evans collection

A small forged steel combined hoe and rake head hand cultivator tool. It has one flattened hoe shaped edge at one end and at the opposite, three rake prongs, and there is an extension on the head for the wooden handle to be attached. It could have been used in small areas such as a garden in the 19th century..agricultural tools, tools, rakes, gardening tools, hand tools, hoes

Found at 'Mulvra', a property near Linton belonging to Digory Pendray Roberts. It is believed that the candle-holder was forged in the blacksmith's workshop at the property. Found in the late 1940s and donated to Linton & District Historical Society by Lyle Fletcher, a descendant of Digory Roberts.Iron candle holder, round section to hold candle, with horizontal spike attached, to enable candle holder to be pushed into rocks or clay of mine wall.mining, candle holders