NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra

Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Tilley Owl England Kerosene Pressure Lantern. A camping pressure lamp with dark blue enamel top. Pump action handle pressurizes the fuel tank to approx 2 atmospheres. Owl motif on base (very unclear).TILLEY - ENGLAND (on tank) GLASS - TILLEY - DAVISIL 171 HEAT RESISTING / MADE IN ENGLAND Owl motif on basetilley, kerosene, lamp

Lake Bolac Post Office Glenelg Highway. Initially the Post Office was established at the Store in 1868. This official weatherboard building was opened in 1887 incorporating a telegraph office, money order office and post office savings bank. The Post Office business was relocated in 1944 and the building was used as a private residence with the front room leased to Dennys Lascelles. Note the horse hitching rail and kerosene street light.Photograph depicting a weatherboard building across a road. The building is fenced. In front of the building there is a telegraphic or electric post and a lamp post.lake bolac, post office, glenelg highway, dennys lascelles

Belonged to the Alison, John & Michael Woods' mothers parents, John & Eliza James. They lived in Napier Street Creswick. It is believed they may have bought it after moving into this house about 1909Belonged to the Grandparents of the Museum owners.Decorative brass kerosene lantern, suspended from ceiling by brass chains with a frosted glass hood and glass crystal skirt. Nilhanging lamp. kerosene lamp. hanging kerosene lamp. hanging brass lamp. brass hanging lamp.

Small hurricane lamp with metal top and base and glass lantern. A metal hook on top to hang lamp.Patent 71-01 july 25 04 May 1906 around edge on top. ' Dietz Sport NY USA' on the glass lantern. 'Made in USA Dietz sport' on toplighting, kerosene & oil

Acetylene lamp with metal base and white glass lampshadeRiemann DR.M.SCH - on upper body|Herm Reimann Chemnitz Gable N Zlighting, kerosene & oil

British Finger Lamp with dark blue glass base and handle. Mouth blown. Would have used kerosene. 1880- 1910.lighting, kerosene & oil

Oil lamp ornate metal base, green glass holder for oil.lighting, kerosene & oil

Lmap was hung in the old Malmsbury HotelSpherical shaped lamp made of tin, decorative features on this part, which holds the kerosene. Protruding from either side are two kerosene burners (no glass with this lamp). Lamp has a large handle lamp, lantern, kerosene

this signal lamp was used at the Numurkah Railway StationBlack-painted tin, cylindrical in shape, with handle. Circular lens at the front with brass-coloured edging. Smaller red lens at the back with white edging. Side slot for hanging lantern onto post or hook. Round chimney/vent at the topNumurkah (metal embossing)railway, lamp, lantern, kerosene

Black painted tin horizontal cylindrical shape on a cylindrical shaped base. Glass lens at the front with silver edging . Two tiered chimney for ventilation. Smaller Red lens at the back. Two protruding side pieces for hanging on hooksDietz Octo Driving Lamp New York U.S.A. (on back)lamp, lantern, driving, kerosene

Silver-coated tin kerosene burning lampHas small round base with cut-outs, extending to a heavily decorated rounded bowl lamp, kerosene, table

Large Platform Lamp used by Railways to signal train at stoppings, Cubed in shape with angled sides. Plain glass front, Red-coloured lens on both sides, which can be opened to reveal plain glass.. Covered chimney on top . Bracket on the back to hang the lamp up. railway, platform lamp, lantern, signal, kerosene

Black painted tin box. Hexagaonal in shape. Opening at one end for sliding lenses. Wing nuts either side of box. Vent holes in top and bottom sides. Latched back entry, hexagonal in shaperailways, signal, lamp, kerosene

Metal cylindrical base to store kerosene. Above this area is a cylindrical glass area for the actual lamp light. Above this is a metal cylindrical cover with perforated holes for venting fumes. A thick metal wire handle is attached to the sides of the lamp. Access to the inside of glass area is via two spring-loaded clamps on either side of the glass area.On glass: Pyrex, Aladdin, Made in Australialamp, light, lantern, kerosene

Metal (silver-plated?) cylindrical base with a column rising up to a cylindrical storage area for kerosene. On top of this are three wires protruding out from the burner area. These wires would be used to hold the glass lens (not with the lamp)lamp, lantern, light, kerosene

Metal cylindrical base to store kerosene. Metal "arch" connected to the base and holding the top metal vent in place. The top vent and bottom vents have wire metal holding the glass lens in place. There is also a wire handle Lanora Australia, on baselamp, lantern, light, kerosene

Guards lamp - of the type used by the Victorian Railways to give a green, red or clear or white signal while shunting or authorising trains to proceed. Used by station staff, shunters, guards and signal men.While not directly related to Ballarat tramways, of the type used by the Railways in the Ballarat district.Hand Lamp, Guards - Exterior casing of a black painted metal railway signal lamp with circular blue (for green colour) and red glass filters and a turning mechanism on the top under a circular handle. Includes the kerosene burner with wick and reflector plate. Item was specifically donated to the Museum by a member who died May 2022.railways, lamps, signals, guards

An anchor light is a white light visible from all around the vessel and is required when anchored or moored between sunset and sunrise. The best place for this light is usually at the top of the highest mast.Example of a kerosene lamp used as an at anchor light.Navigational Light or Riding Light run on oil or kerosene which is displayed by a ship at night when lying at anchor.night light, navigational lighting, kerosene lamp, sailing ships

Prior to the launch of the motor powered Queenscliffe, three row boats were in service as lifeboats. This lantern was part of the equipment of the third lifeboat up to 1926.A brass lamp which was part of the safety equipment on board the Third Queenscliff LifeboatBrass Lantern with interchangeable port and starboard glass filters run of kerosene.Brandt Bros Melbourne Manufacturers 422 Elizabeth Streetlight, navigational safety