Showing 352 items
matching kiln
-
Kew Historical Society Inc
Ceramic - Lidded ewer, Viola Ayling
Viola Annie Ayling (1911-1990), was born in Korumburra. After her marriage to William John Ayling in 1932 she moved with her husband to Tennyson Street [Kew]. A professional tailoress, Viola Ayling was also a talented amateur potter. She created her ceramics at her home at 128 Pakington Street [Kew], where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. This pot is part of a collection of 15 glazed ceramic functional and decorative items donated by her granddaughter to the collection in 2024. A handmade ewer, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Peyte.Handmade ceramic lidded ewer fully covered in an olive green glaze. The lower section of the body, the spout and the lid reveal the coil work construction technique used, whereas the upper body is smoothed.Signature to base: "V. Ayling"ceramics, pakington street -- kew (vic.), ewers, viola ayling -
Kew Historical Society Inc
Ceramic - Bookends, Viola Ayling
Viola Annie Ayling (1911-1990), was born in Korumburra. After her marriage to William John Ayling in 1932 she moved with her husband to Tennyson Street [Kew]. A professional tailoress, Viola Ayling was also a talented amateur potter. She created her ceramics at her home at 128 Pakington Street [Kew], where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. This pot is part of a collection of 15 glazed ceramic functional and decorative items donated by her granddaughter to the collection in 2024. A pair of handmade bookends, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Peyte.Pair of handmade ceramic bookends fully covered in a white, black and predominantly blue glaze. Signature to bases: "V. Ayling"ceramics, pakington street -- kew (vic.), bookends, viola ayling -
Kew Historical Society Inc
Ceramic - Reticulated vase, Viola Ayling
Viola Annie Ayling (1911-1990), was born in Korumburra. After her marriage to William John Ayling in 1932 she moved with her husband to Tennyson Street [Kew]. A professional tailoress, Viola Ayling was also a talented amateur potter. She created her ceramics at her home at 128 Pakington Street [Kew], where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. This pot is part of a collection of 15 glazed ceramic functional and decorative items donated by her granddaughter to the collection in 2024. A handmade, reticulated ceramic vase, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Peyte.Handmade ceramic vase with the body reticulated between the moulded floral exterior. The vase is fully glazed in a brown.Signature to base: "V. Ayling"ceramics, pakington street -- kew (vic.), vases, viola ayling -
Kew Historical Society Inc
Ceramic - Madonna and Child, Viola Ayling
Viola Annie Ayling (1911-1990), was born in Korumburra. After her marriage to William John Ayling in 1932 she moved with her husband to Tennyson Street [Kew]. A professional tailoress, Viola Ayling was also a talented amateur potter. She created her ceramics at her home at 128 Pakington Street [Kew], where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. This pot is part of a collection of 15 glazed ceramic functional and decorative items donated by her granddaughter to the collection in 2024. A handmade, abstract figurative sculpture, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Peyte.Handmade ceramic sculpture of an abstracted Madonna and Child. The figures are fully covered in an olive green glaze.Signature to base: "V. Ayling"ceramics, pakington street -- kew (vic.), sculptures, abstract art, viola ayling -
Kew Historical Society Inc
Ceramic - Lidded container, Viola Ayling
Viola Annie Ayling (1911-1990), was born in Korumburra. After her marriage to William John Ayling in 1932 she moved with her husband to Tennyson Street [Kew]. A professional tailoress, Viola Ayling was also a talented amateur potter. She created her ceramics at her home at 128 Pakington Street [Kew], where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. This pot is part of a collection of 15 glazed ceramic functional and decorative items donated by her granddaughter to the collection in 2024. A handmade ceramic container, expertly potted and glazed which is representative of Australian ceramic design of the period.Handmade ceramic container, constructed through coil work with the lid and upper body fully glazed and the lower half part glazed in orange.Signature to base: "V. Ayling"ceramics, containers, pakington street -- kew (vic.), viola ayling -
Flagstaff Hill Maritime Museum and Village
Container - Jug, Hoffman Pottery Pty, Ltd, Circa 1929
The Hoffman company was established in 1870 to mass-produce bricks using the Hoffman patent kiln and the Bradley and Craven brick press. Once established the company entered a period of expansion aided by Melbourne's building boom from 1870 to 1890. During this time approximately ten brick machines were in operation producing some 18,000 bricks per hour. An extensive pottery works were established initially supplying mainly tiles and drainpipes and later domestic pottery such as the company's Melrose ware. The company even had its locomotive shunt the works siding which connected with the Victorian Railways at South Brunswick. By 1890 Hoffman was the largest brick and pottery works in Victoria, however, the 1890s depression halted company expansion. The company joined the Brick Co-operative when it was formed in 1896. The cooperative regulated prices and output from member brickworks. As the depression ended business picked up and the works were expanded to increase the production of stoneware pottery, especially domestic wares. The brickworks, however, never recovered the momentum of the early period. During the 1920s and 1930s, the works gradually ran down, and following the Second World War, production reached an all-time low. The No.1 works were stripped and sold. (For further information regards Hoffman Kilns see note section of this document.) An item made in Melbourne by at the time the largest pottery works in Australia making industrial and domestic wares for the home and building industries. Stoneware Demijohn jug with cream and brown glaze. Printed around base of jug, MELBOURNE, 1929"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jug, melbourne, 1929, stoneware jug, hoffman potteries -
Federation University Art Collection
Ceramic, Tony Nankervis, Three Lidded Woodfired Cylinders by Tony Nankervis, 1986
Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire."(https://www.strathnairn.com.au/studios/artist-in-residence/montessa-maack-ursula-burgoyne-jen-lyall-and-vicki-grima-5ndd6, accessed 09 July 2021)Tony NANKERVIS Tony Nankervis taught ceramics from 1984 when the university was the Northern Rivers College of Advanced Education from 1984. before moving to Southern Cross University (SCU) in 1994. He retired from full time teaching in 2004. Nankervis was a pioneer of the long wood-fired ceramics technique in Australia: a technique he has been practising since the late 1970s Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire. There are particular qualities that only come from firing in that way, he said. "If you see some of these older ceramics, particularly from Asia, the surface qualities are discernible from the surfaces generated by post-Industrial fuels." (https://www.scu.edu.au/engage/news/latest-news/2004/leading-australian-potter-who-paints-with-fire-retires-from-lecturing-at-scu-after-19-years.php, accessed 09 July 2019)Three Lidded Woodfired Cylinders ceramics, jan feder memorial ceramics collection, tony nankervis, tony nankervic -
Federation University Art Collection
Ceramic, Tony Nankervis, Dry Glazed Lidded Form by Tony Nankervis, 1986
Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire."(https://www.strathnairn.com.au/studios/artist-in-residence/montessa-maack-ursula-burgoyne-jen-lyall-and-vicki-grima-5ndd6, accessed 09 July 2021)Tony NANKERVIS Tony Nankervis taught ceramics from 1984 when the university was the Northern Rivers College of Advanced Education from 1984. before moving to Southern Cross University (SCU) in 1994. He retired from full time teaching in 2004. Nankervis was a pioneer of the long wood-fired ceramics technique in Australia: a technique he has been practising since the late 1970s Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire. There are particular qualities that only come from firing in that way, he said. "If you see some of these older ceramics, particularly from Asia, the surface qualities are discernible from the surfaces generated by post-Industrial fuels." (https://www.scu.edu.au/engage/news/latest-news/2004/leading-australian-potter-who-paints-with-fire-retires-from-lecturing-at-scu-after-19-years.php, accessed 09 July 2019)Presented by the artistLidded Raku fired box, dry glazedceramics, jan feder memorial ceramics collection, tony nankervis, tony nankervic -
Footscray Community Arts
Industrial Hope, Emma de Clario, (exact); 2005
MEDIUM: Oil on kiln dried red gum (wood block) DESCRIPTION: Black figure och blue and white background, wood block, no frame. A realistic depiction of an industrial crane against a predominantly cloud covered sky. The crane set in the lower centre of the canvas almost becomes secondary to the sky and cloud which dominate the wood block. The sky set in bright and vibrant blues contrast the darkness of the clouds, ominous and heavy in shades of grey and green, the colours seem to reflect the relentless clock of industry. A patch of light behind the crane gives it a strong focal point. Signed and titled on reverse of imageoil, de, hope, clario, industrial, photograp -
Phillip Island and District Historical Society Inc.
Photograph Album, Kodak, Phillip Island Cemetery, c 1990
The Album was compiled by Nancy McHaffie late 1990's, with the assistance of Edith Jeffery's, with her book "Garden of Memories" and extensive knowledge of Phillip Island. The Cemetery lies back from the road and is surrounded by Manna Gums, rare Peppermint Gums, Blackwoods and other native trees. In all 25 acres of land were set aside as Crown Land in the land settlement of 1868. There are 6.2 acres of wetlands near the cemetery entrance.466-21: Henry Bennell was known as "Bricky" Bennell. Henry or Harry as he was sometimes called, was the Island's firs bricklayer. He was married to Elizabeth West, daughter of John West, who owned the first Chicory Kiln on the Island in what is now Thompson Avenue. Henry Died on September 14th, 1940, aged 68 years. 466-22: Captain David Reid J. B. Captain Reid served as a Councillor of the Phillip Island and Woolamai Shire in 1875. He was the first Trustee and President, as well as being instrumental in establishing a school at Rhyll on block 13 about 1870. He died in 1891 at the age of 75.phillip island cemetery, nancy mchaffie, edith jeffery -
Flagstaff Hill Maritime Museum and Village
Ceramic - Teapot, First half of the 20th century
Lusterware is a type of pottery or porcelain with a metallic glaze that gives the effect of iridescence. The technique on pottery was first developed in Mesopotamia (modern Iraq) in the early 9th century. It is produced by metallic oxides in an overglaze finish, which is given a second firing at a lower temperature in a "muffle kiln", or a reduction kiln, excluding oxygen. The Lusterware effect is a final coating applied over the ceramic glaze, and fixed by a light second firing, applying small amounts of metallic compounds (generally of silver or copper) mixed with something to make it paintable (clay or ochre). This is then fired in a reducing atmosphere at a temperature high enough to "soften" the glaze from the first firing, and break down the metallic compounds, leaving a very thin ("perhaps 10 or 20 atoms thick") layer that is fused with the main glaze, but is mainly metal. Lusterware normally only uses one colour per piece, and the range is limited a "gold" derived from silver compounds was historically the most common. The process has always been expensive and rather unpredictable, always requiring two firings, and often the use of expensive materials such as silver and platinum. The very thin layer of luster is often delicate, and many types of Lusterware are easily damaged by scratching removing the metallic layer, or by contact with acids. Lusterware has therefore always been for display and occasional use, although by the 19th century it could be relatively cheap. Many pieces show the luster effect only working correctly on parts of the surface, or not at all. An item probably made in Staffordshire UK where this type of pottery was popular in the late 19th century by unknown pottery as the subject item has no marks. The teapot at this time cannot be associated with a historical event, person, or place, provenance regards manufacture is unknown, item assessed as a collection asset given it was produced before 1950.Teapot ceramic ornate copper lusterware abstract floral design handle has a protruding sculptured bird for thumb grip. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, teapot, tea set, kitchen ware, ceramic, lusterware, pottery, staffordshire uk, pottery finishes -
Mont De Lancey
Cloisonne - Vase
Purchased by Mr. & Mrs. H. N. Lord in 1970. Cloisonné, a French word meaning "enclosed", is a metal-working technique. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. IPair of miniature royal blue Chinese Cloisonne vases with pink floral design.vases -
Mont De Lancey
Cloisonne - Vase
Purchased by Mr. & Mrs. H. N. Lord in Japan in 1960. The Japanese word for Cloisonne ware is SHIPPPO or seven treasured ware. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. Small Japanese Cloisonne iridescent red vase, with pale pink flowers on black wooded stand.vases -
Mont De Lancey
Cloisonne - Vase
Purchased by Mr. & Mrs. H. N. Lord in Japan in 1960. The Japanese word for cloisonne ware is SHIPPO or seven treasured ware. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. Pale blue Japanese Cloisonne vase with peony flower design in pink and white with green leaves on black wooden stand. vases -
Eltham District Historical Society Inc
Document - Folder, Norman, Jo
Jo Norman, born 3 March 1946, remembers her father ploughing, with a draught horse, the family's 5 acres and using a kiln to make roof tiles. Her siblings were Alison and Richard. The family was closely involved with St Margaret's Church and the church's lay activities. Jo attended Eltham Primary School, later working at the Bank of NSW until she married Graham Norman in 1967. In 1981, Jo and Graham established a cleaning business. She has been contributed to St Margaret's in various roles. Contents Newsletter: "Wise faithful - Jo Norman", The Parish Matters, St Margaret's Anglican Church Eltham, No.1 April 2017, life and contributions of Jo Norman especially her involvement with St Margaret's Church.Newspaper clippings, A4 photocopies, etcjo norman, alison norman, richard norman, fr ian brown, eltham little theatre, st margaret's church eltham, eltham primary school, zen den cafe eltham, winifred long, david gibbons, graham norman, reverend claude longfield, eltham east primary school, frank west, wyn giggins, ziggy rozitis, eltham high school, st faiths kindergarten, melbourne rope quoits, fr val rogers, "carseburn" at arthurs creek -
Flagstaff Hill Maritime Museum and Village
Ceramic - Stoneware Bottle, Late 1800s to early 1900s
This bottle was recovered decades later from a shipwreck along the coast of Victoria. It may have been amongst the ship's cargo, its provisions or amongst a passenger's personal luggage. It is now part of the John Chance collection. Stoneware bottles similar to this one were in common use during the mid-to-late 19th century. They were used to store and transport. The bottles were handmade using either a potter's wheel or in moulds such as a plaster mould, which gave the bottles uniformity in size and shape. The bottle would then be fired and glazed in a hot kiln. Makers often identified their bottles with the impression of a small symbol or adding a colour to the mouth. The manufacturer often stamped their bottles with their name and logo, and sometimes a message that the bottle remained their property and should be returned to them. The bottles could then be cleaned and refilled.This stoneware bottle is historically significant for its manufacture and use in the late 19th to the early 20th century. The bottle is also significant as it was recovered by John Chance, a diver, from a wreck on the coast of Victoria in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, salt glazed stoneware, beige, discolouration above base.Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, artefact, stoneware, ironstone, pottery, bottle, antique bottle -
Otway Districts Historical Society
Photograph, R. Preston, Kawarren: an UP goods train, 1958, 14 December 1958
Kawarren was an early timber and limestone loading point. Timber was shipped in by Watson and Facey, Condon Brothers, and Coppock, amongst others, some of which had tramways up to 6.5 km long to the station. Bushfires roared through the area in 1939 and made the area unworkable. An outcrop of limestone existed near Kawarren but it was not until the railway was built that it became workable. 360 metres north of Kawarren station two then three kilns were erected, and later a shed and covered area over a short length of the rail siding in order to prevent rain damage to the lime while it was being loaded. Sluicing was introduced, and the tramway was extended further when the quarry ate deeper into the hillside. Limestone traffic of around 2,000 tonnes each year kept the station busy until the trade ceased in 1957.B/W. On the 14 December 1958 at Kawarren an UP goods train shunts on the siding. A man is talking to the engine driver while another man approaches the engine.kawarren; railways; timber; lime; -
Mont De Lancey
Cloisonne - bowl
Purchased by Mr. & Mrs. H. N. Lord in 1970.Purchased by Mr. & Mrs. H. N. Lord in 1970. Cloisonné, a French word meaning "enclosed", is a metal-working technique. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. ICloisonne Chinese bowl. Large brown with blue and yellow floral design on a carved wooden base.bowls -
Mont De Lancey
Cloisonne - Vase
Purchased by Mr. & Mrs. H.N. Lord in 1970. Purchased by Mr. & Mrs. H. N. Lord in 1970. Cloisonné, a French word meaning "enclosed", is a metal-working technique. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. IOrnamental miniature Chinese cloisonne vase. Has floral patterned design.vases -
Mont De Lancey
Cloisonne - bowl
Purchased by Mr. & Mrs. H. N. Lord in 1970. Purchased by Mr. & Mrs. H. N. Lord in 1970. Cloisonné, a French word meaning "enclosed", is a metal-working technique. It is an ancient technique for decorating metalwork objects. The resulting objects can also be called cloisonné. The decoration is formed by first adding compartments or cells to the metal object. This is done by soldering or sticking silver or gold wires or thin strips placed on edge. These are visible in the finished piece, separating the different compartments. Coloured enamel is the usual filling for the cells. Cloisonné enamel objects are worked on with enamel powder made into a paste, which then is fired in a kiln. In older times inlays of cut gemstones were often used. They were decorated with geometric or schematic designs, with thick cloison walls. IBlue and gold patterned Chinese Cloisonne bowl with lid, with gold lion on top.bowls -
Federation University Historical Collection
Book - Documents, Herbert Henry Smith, Ballarat Technical Art School, 1918-1929, 1918-1929
Blue hard covered book with hand written reports from the Art Principal, H.H. Principal. Two letters are pasted into the front, one from Frank Tate of the Victorian Education Department. 26 April 1918 - Proposed pottery industry in Ballarat 31 May 1919 - Erection of pottery kiln, with Selkirk bricks. 28 June 1918 - Daylesford Technical Art School. 30 August 1918 - Resignation of C. Campbell, instructor of Photography. 25 October 1918 - Returned Soldiers Classes in Art Metal and Signwriting. 25 October 1918 - Herald Shield Trophy 28 July 1922 - Ragged Boys Home, Tennis Court 22 August 1924 - Letterhead of the Attorney General Victoria concerning the transfer of the Ballarat Supreme Court to the Ballarat School of Mines. 15 October 1924 and 20 May 1925 - Carvings of 24 panels decorated with Australian birds, animals and flora to form part of the decoratve scheme for the Villers Bretonneux school. 21 April 1926 - White Flat is available for the use of the school. 29 February 1928 - Donation of a linotype machine by The Courier. 27 June 1928 - Internal Sewerage to the Ballarat Technical Art Schoolballarat school of mines, ballarat technical art school, h.h. smith, returned soldier teachers, harold herbert, ponsonby carew-smyth, f.h. hoskin, carpentry workshop, donald i. johnston, herald shield, kenneth moss, hilda wardle, miss bell, margaret bell, millinery, j.y. mcdonald soldiers memorial, john rowell, repatriation building, stained glass classes, dressmaking fees, ballarat supreme court, m. baird, carvings, villers bretonneux school carvings, ethel kift, m.c. young, macrobertson scholarship, elvie ford, edwin robinson, annie hauser, robina mackie, e. quick, tennis court, w.e. gower, colin hunt, white flat, frank hall, effie holmes, mavis beacham, henry harvey, plaster casts, pearl frickie, w.r. dean, marjery henderson, sewerage, laura crouch, ballarat teachers' college, gertie gough, gwen nagle, lynda clark, jack walker, cyril gibbs, repatriation, donald johnston, ceramics, kiln, c. campbell, photography, jean maude, sylvia copperwaite, olga dulfer, may pollock, margaret bailey, stella clarkson, may norrie, nellie nicholls, nancy govan, edith curnow, kathleen windsor, betty johnson, edna pearson, elvie thege, gwen neagle, effie george, gwen tunbridge -
Flagstaff Hill Maritime Museum and Village
Ceramic - Stoneware Bottle, Late 1800s to early 1900s
This bottle was made in Scotland and recovered decades later from a shipwreck along the coast of Victoria. It may have been amongst the ship's cargo, its provisions or amongst a passenger's personal luggage. It is now part of the John Chance collection. Stoneware bottles similar to this one were in common use during the mid-to-late 19th century. They were used to store and transport. The bottles were handmade using either a potter's wheel or in moulds such as a plaster mould, which gave the bottles uniformity in size and shape. The bottle would then be fired and glazed in a hot kiln. Makers often identified their bottles with the impression of a small symbol or adding a colour to the mouth. The manufacturer usually stamped their bottles with their name and logo, and sometimes a message that the bottle remained their property and should be returned to them. The bottles could then be cleaned and refilled. However, this bottle has no identification marks. This stoneware bottle is historically significant for its manufacture and use in the late 19th to the early 20th century. The bottle is also significant as it was recovered by John Chance, a diver, from a wreck on the coast of Victoria in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, salt glazed stoneware, beigeNoneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, shipwreck artefact, stoneware, ironstone, pottery, bottle, antique bottle -
Forests Commission Retired Personnel Association (FCRPA)
Commercial timbers of Victoria, Sample Box
Some decades ago a card sorting set for the identification and description of Australian timbers was developed for timber species which were available commercially and were in common usage, by the Commonwealth of Australia (CSIRO, Division of Forest Products) To complement and inform this national timber set each State or Territory developed reference timber sets of representative species. The Commercial Timbers of Victoria set was Victoria’s most recent (circa 1984) expression of this Victorian timber samples were sourced from logs selected by Forest Commission of Victoria (FCV) District Foresters and milled locally. Kiln drying and machining was carried out at timber producers Row, Web and Anderson, in Port Melbourne. Labeling and boxing was done by FCV Timber Inspectors, with box and booklet design and graphics handled in-house More recent timber samples were badged as Conservation Forests & Lands, reflecting historical government restructuring in the early 1980s Info: Simon MurphyProvided the public, industry (timber and associated), and educational facilities with a reference collection of notable Victorian timbers. Initially in a reduced format from 1940-50s, with boxed sets produced from 1981 until 1984A boxed set of timber samples representing the 20 tree species that were considered to be the most notable in Victoria. The set also includes an information booklet. Each timber specimen has information on species, occurrence, uses and physical properties Produced for sale by the the FCV and later by the Department of Conservation Forests and Lands. (CFL). -
Bacchus Marsh & District Historical Society
Ceramic, Tile manufactured by Darley Firebrick Company
The manufacture of firebricks is believed to have begun in Bacchus Marsh in the 1880s when William Thomas Wittick in partnership with a Mr Ackers, and later a Mr Telford, quarried a rich deposit of fire clay at Darley. In 1902 financial assistance was provided by David Mitchell a significant businessman and contractor from Melbourne and the business then expanded and became a major supplier of refractories for gas works in Melbourne, with side lines in moulded fire bricks for foundries and smelting furnaces and complete kiln lines for potteries. The business traded under the name Darley Firebrick Company and later as Darley Refractories Ptd Ltd and was in business for over 100 years. The tile (aka refractory) described in this record was possibly produced for use in very high temperatures (in excess of 1,000°F [538°C]) encountered in modern manufacturing. More heat-resistant than metals, they are used to line the hot surfaces found inside many industrial processes. The date the tile was produced is unknown.Rectangle shaped ceramic tile'Darley 26' inscribed within a circledarley firebrick company, refractory materials, wittick family bacchus marsh, william thomas wittick 1857-1939, darley refractories ptd ltd -
Kiewa Valley Historical Society
Jar/ Demi John Stone Ware, Circa 1860
This kiln glazed container for liquid's, was the type used in the 1700's to mid 1900's to contain fluids mainly for human consumption which needed to retain liquid that could be affected by sunlight and or required to be maintained at a cooler temperatures. Ginger beer and other "brews" for human consumption were the prime target. The ability to refill these vessels were of the utmost importance to the consumer. Over time these containers were reduced in size and produced for "special" liquids e.g. alcoholic Port. This Demi John stone ware was manufactured in Tamworth (England) and imported into Australia during a period when the majority of "quality" domestic items were sourced from "the Mother Country" and the ties between the still "colonial" outpost were very strong. This bondage remained longer in rural communities than in the cities. The "multi-culturalism of the post World War II era resulted in the lessening of the earlier ties. The growing of nationalism, the Aussie evolution, was brought about by the increased social and business/commercial interactions between Australia and the United States of America, post World War II.This container(jug) is very significant to the Kiewa Valley, a rural region that required these type of liquid storage vessels, especially in the late 1800's to the mid 1900's. These were times when household refrigeration, if available, would be from the "block ice" coolers or "cool" storage nooks and crannies within farmhouse locations.This large "stone ware" glazed Demi John, alias Carboy has a capacity of over 20 litres. It has a conical smooth lipped neck top with a wide, flat(three to four finger) carry and poring handle. The top third portion of the jug is caramel in colour and the bottom a darker cream. It has a manufacturer's seal stamped into the surface before glazing. This item would have been corked and then sealed (air tight) with wax.manufacturer's seal "GEORGE SKEY WILNECOTE TAMWORTH"household liquid jar container, 1800's food storage, kiln fired glazed pottery -
Mont De Lancey
Functional object - Bottles, Unknown
These bottles were common in the late 1800's and 1900's. Bottle Nos 1 and 2 were made by Angus & Co, a Sydney company producing ink and gums (glue and clag) from about 1880 to 1920. Their products were sold in stoneware and glass containers in varying sizes. 1. Small pottery bottle referred to as a "Penny Ink" bottle, made by Angus & Co. The small bottle got its name because of the price of 1d. = 1 penny. This bottle is missing. Nos. 3 and 4 The two tall thin Erven Lucas bottles with handles at the top were usually referred to as "Dutch Gins". In fact they actually contained "'Seltzer Spa water' or a form of Quinine Tonic, both supposed to be health drinks. These types of bottles first arrived in Australia with the Gold-seekers from Europe. Early samples are somewhat crudely made. The potter would have formed the bottle with a young apprentice applying the handle, name stamp and the glaze prior to being fired in the kiln. There is evidence of fingerprints from these processes on both samples.A collection of five handmade rare stoneware bottles with a salt glaze: 1. Small pottery bottle referred to as a "Penny Ink" bottle, made by Angus & Co. The small bottle got its name because of the price of 1d. = 1 penny. This is missing. 2. Medium glazed brown pottery bottle with a pouring spout (Angus & Co Ink Commercial). 3. Medium glazed brown pottery bottle with a pouring spout (Bourne Denby). 4. Large glazed brown pottery bottle with a pouring spout (Bourne Denby). Sample is from England probably sold for 2/- or 2/6d. Two shillings or two shillings & sixpence. 5. and 6. Two tall thin brown pottery bottles, one with a broken cork stopper and one without a stopper with Erven Lucas Bols - Het Lootsje Amsterdam stamped at the top of both. They were usually referred to as "Dutch Gins". 6. Green/black bottle is a traditional Dutch Gin with tapering sides, which made it easy to remove from the mold after being blown by hand and the cork top was applied by an apprentice. This sample dates from approximately 1900. Earlier samples are very crude with later samples being machine made with embossing.(This bottle is missing, 13.10.2022). 2. 'Angus & Co Ink Commercial' 3 and 4. 'Bourne Denby' stamped inside an oval lined shape. 5. and 6.Erven Lucas Bols - Het Lootsje Amsterdambeverage bottles, bottles, storage containers, stoneware bottles -
Eltham District Historical Society Inc
Photograph, Visit to Clifton Pugh's home, Dunmoochin, 26 May 1991, 26/05/1991
[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Three colour photographsactivities, clifton pugh, dunmoochin -
Eltham District Historical Society Inc
Photograph, Leon Saper residence, 60 Dunmoochin Road, Cottlesbridge, 26 May 1991, 26/05/1991
[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Two colour photographsactivities, clifton pugh, dunmoochin, leon saper -
Eltham District Historical Society Inc
Photograph, Visit to Clifton Pugh's home, Dunmoochin, 26 May 1991, 26/05/1991
[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Three colour photographsactivities, clifton pugh, dunmoochin -
Federation University Art Collection
Artwork - Ceramics, 'Dragon' by Heather Wilson, c1985
Heather WILSON (1961- ) Born Rotherham, England. Arrived Australia 1967. Heather Wilson graduated with a Bachelor of Education (Art & Craft) from Melbourne State College in 1982, majoring in Ceramics. Artist's statement - "All of my work is hand built and explores animal forms in various ways. Animals have always fascinated me and have been a part of my work for the last 30 years. Whether appearing as dragons, exotic birds or bones, most of my images have a basis in nature. Sometimes it is just a characteristic or a quirky gesture that will inspire a piece, sometimes a photograph or a drawing done at the zoo or museum. Dragons have always given me the freedom to explore an emotion or attitude without the restrictions of a form being right, no one can tell you what a dragon should be like as they are an imaginary beast. All of my work is hand built from earthenware or porcelain. Each of them is unique and they may be similar but no two are ever the same. Most of my vessels are coil built and the dragons and birds are constructed on their bases. The pieces are fired to 1080 C in a gas kiln."heather wilson, ceramics, jan feder memorial ceramics collection, gippsland campus