Uniform jacket, Black doublet style with gold braid around stand-up colar, fastened with 7 silver, diamond shaped, scotch thistle buttons. Black braid around cuffs, and pocket and tail flaps. Black cord epaulettes on shoulders, left has a cord lanyard loop. 3 strips of gold braid on sleeve cuffs, front pocket flaps (2), tail flaps (2). Gold, daimond shaped, scotch thistle button on epaulettes, pocket flats, cuffs, one between tail flaps (another is missing). Black lining in body, white striped lining in sleeves, Padded shoulders, Label "David Lack Pty Ltd, uniform specialist Melbourne."Label "David Lack Pty Ltd, uniform specialist Melbourne."flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, uniform, historical uniform, melbourne clothing, schttish thistle button

A dead eye is a part of a vessel’s rig On board sailing ships, dead eyes were used in three different areas. Traditionally dead eyes are made of wood but they have different forms according to where they were used in the vessel rigging. The most common type of dead-eye is flat, with three holes and was used to tension the shrouds, the heavy lines which steadied the masts on each side. Each shroud had a dead eye at the lower end, which corresponded to a similar dead eye attached to the side of the ship. The two were connected with a rope called a lanyard, which was used to tighten the assembly. The stays, heavy lines running forward from the masts, were also tensioned with dead eyes. These are much larger and rectangular, with four or six holes. The third type of dead-eye was a two-holed version attached to an eye at the end of the parallel, which tied a yard to the mast. The loose ends of the parallel rope passed through the dead eye and then down to the deck, making it possible to tighten or slacken the parallel from the deck so that the yard could be more easily manoeuvred. It was especially important for the mizzen yard, which had to be shifted from one side of the mast to the other when tacking the ship.An item used on sailing ships rigging this item of ships equipment and its use has been used from the beginning of the invention of sailing ships going back to ancient times. Its use on sailing vessels had not changed in design or use until they went out of fashion and steamships took their place.Circular wooden ships rigging dead eye with three holes Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel rigging, dead eye, sailing equipment

A dead eye is a part of a vessel’s rig On board sailing ships, dead eyes were used in three different areas. Traditionally dead eyes are made of wood but they have different forms according to where they were used in the vessel rigging. The most common type of dead-eye is flat, with three holes and was used to tension the shrouds, the heavy lines which steadied the masts on each side. Each shroud had a dead eye at the lower end, which corresponded to a similar dead eye attached to the side of the ship. The two were connected with a rope called a lanyard, which was used to tighten the assembly. The stays, heavy lines running forward from the masts, were also tensioned with dead eyes. These are much larger and rectangular, with four or six holes. The third type of dead-eye was a two-holed version attached to an eye at the end of the parallel, which tied a yard to the mast. The loose ends of the parallel rope passed through the dead eye and then down to the deck, making it possible to tighten or slacken the parallel from the deck so that the yard could be more easily manoeuvred. It was especially important for the mizzen yard, which had to be shifted from one side of the mast to the other when tacking the ship.An item used on sailing ships rigging this item of ships equipment and its use has been used from the beginning of the invention of sailing ships going back to ancient times. Its use on sailing vessels had not changed in design or use until they went out of fashion and steamships took their place.Circular wooden ships rigging dead eye with three holes Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel rigging, dead eye, sailing equipment

1. Shirt - Khaki, polyester/cotton fabric, long sleeves with button cuffs, shoulder epaulettes, two front pockets with button down flap, brown plastic buttons. Cotton manufacturers labels top back of shirt and bottom back of shirt, with black print information. 2. Trousers - Khaki, polyester/cotton fabric, fob pocket, two side pockets, on back pocket with button down flap, metal zipper fly, brown plastic buttons. Three cotton manufacturers labels inside back waistband and back pocket lining with black print information. Polyester lining waistband and pockets. 3. Necktie - khaki cotton knit fabric with unfinished ends. 4. Lanyard - gold cotton cord with knots.Cotton label information - black ink print. 1. Top back of shirt "CLASS - 8405/66 - 017-2261/REGIMENTAL NO./NAME". Bottom back of shirt 'MACHINE WASHABLE/DO NOT BOIL/ DRIP DRY/ WARM IRON/ SALIO/ VICTORIA, 1966^" 2. Back right inside waistband "REGIMENTAL NO./ NAME". Back left inside waistband "Dry clean only/ repress on original creases/ use damp cloth or medium/TO HOT STEAM IRON/ Mending patch attached". Label on back pocket lining. John Sackville - sons/ -Aust - Pty Ltd/ Victoria 1966/^ size 31 RB/ W.31" 1/L 30 1/2/ CLASS 8405/66-018-5518. uniform, army, polyesters

Royal Australian Navy - Uniform belonged to LS MTP E Rayner.1. Jumper/Barathea - long sleeve white polyester/cotton fabric with Navy blue collar attached, side zip under arm. Insignia to left sleeve depicting rank. Right side insignia depicts category. 2. Trousers - white polyester/cotton fabric, bell bottom. 3. Shirt - white polyester/cotton fabric, short sleeve, navy blue trim to square neckline. Insignia to left sleeve. 4. Silk - Black polyester black fabric to arrange around the collar. 5. Bow - white cotton tape. 6. Lanyard - white cord to arrange around neck. 7. Lid - white with black "Tally" band, sailors cap with Navy blue tape - chin strap. 1., 2. - Hand embroidered red cotton - "E RAYNER", 7. Handwritten, black ink, "LS MTP RAYNOR inside on the crown, Tally band - Embroidered gold thread "HMAS DERWENT'", on black band. " RED ANCHOR/TAILORED GARMENTS/ 65% POLYESTER 35% COTTON/ DO NOT BOIL, DRIP DRY, WARM IRON"ran, uniform

1. Khaki Woollen jacket. Four front pockets. The front is held shut with four shiny buttons. AMF Motif. Epaulettes have 3 pips each (Captain) and shiny badge "AUSTRALIA". The arms have a triangular colour patch, bisected, having a black triangle over a red triangle. On the collars are brass badges of the 17th Prince of Wales Light Horse. 2. Trousers Woollen khaki. Brown buttons on fly. Side pocket and pressed metal buttons around waist. 3. Lanyard - purple. 4. Bandolier, brown leather. Five Ammo pockets, brass buckle. 5. Belt - leather, brown. Brass, two pin buckle. Brass fittings to add a sword and shoulder strap.4. Written on back of Bandolier = L.W. Baker R. Heath 4/3152.passchendaele barracks trust, uniform, pre and post ww2, army

"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

Standard issue battle jacket for the Royal Australian Artillery, issued by defense department. Pattern 1949 Khaki Battle Dress Blouse. Two deep button breast pockets, Four buttons on right side concealed by right side jacket. Belt hem located at the bottom with buckle. Hemmed arm cuffs with one button on left and right sleeves. Two internal pockets on right and left side. Cord lanyard hanging from left sleeve. Patch with words 'Royal Australian Artillery' embroidered in red on navy on both left and right shoulders. Separate embroidered crown placed above both embroidered text patches. Material with embroidered crown attached with button at the top on right and left shoulder. Crown is made up of red, purple, cream and brown string. Material loop attached inside top of jacket at the neck.Sewn patch with inscription R. J. Hatch & Co. 1950 Size......... MADE IN AUSTRALIA Regimental No. ...................... Name Stamp on inner lower jacket - '170' with arrow point up to the number.military uniforms, army, battle jacket

Knife, Clasp, with Marline Spike and Tin Opener, manufactured in England to the Standard Pattern 6353/1905, as modified in 1913 with specific dimensions to the tin opener. This pattern was used by British forces, and was one of the patterns issued to members of the Australian Infantry Force during WW1. This pattern was used up until the late 1930s, where it was superseded by other patterns.Knife, Clasp, with Marlin Spike and Tin Opener, manufactured to the standard British pattern 6353/1905, as modified in 1913 with changed dimensions for the tin opener. The hilt of the knife has two chequered pattern sides secured by five metal rivets. The underside of the hilt has two recesses to allow storage of the blade and the tin opener. A tapered steel Marline spike is mounted on the other side of the hilt, pivoting at the opposite end to the blade and tin opener. A copper wire shackle is also secured at this end of the hilt that was used to attach the knife to a lanyard or belt clip. A fingernail indentation is located near the top of one side of the blade. The tin opener has bevelled edges tapered to a point on one side, with a steel post mounted in the middle of the other side.J. CLARKE & SON SHEFFIELDknife, clasp, ww1, steel, marline spike, australian infantry force, milirary

The first meeting of the 1st Bendigo Guides was held by Miss Merle Bush on the 22nd of August 1922 in the St Paul' School Room.. Twelve girls were present. Miss Bush was given permission to open the Company by Miss R. Hamilton, State Secretary for Victoria, She received her Captain's Warrant on 12th December 1922. Three black and white photographs of 1st Bendigo Guides. 6942.10a Taken about 1925 on the steps of the Law Courts with wrought iron gates in the background. Twenty three Guides in uniform with one Guide Leader (Merle Bush), in three rows. The Guide in the centre of the back row is holding a flag. names listed on the back (L - R) FRONT ROW - Lily Koska, Norah Moore, ? , Nancy Hamilton, Jean Thurman, Lola Dickson, Aileen Wood, ? . CENTRE ROW - ? Howard, Bev Lansell, Stella Anderson, Beth Beischer, Gwen Young, Ena Wright (with Lanyard), Madge Welch, Merle Bush (with tie), Biddy Stephens, ? , ? , ? Sides, ? . BACK ROW - Ethel Carter, Olive Wright, Marion Henderson. 6942.10b 1st Bendigo Guides. Merle Bush third from right. 6942.10c1st Bendigo Guides. Merle Bush third from right. girl guides, guiding, merle bush, trefoil guild

This Guide uniform was worn by Jane Reid when she was a Guide at 6th St Hilary's between 1987 and 1989. The uniform consists of a pale blue blouse, junior navy A-line skirt and navy wool beret with the World Guide badge embroidered on it. The scarf with the Victorian State Badge at the back is a triangle and can be used as a sling or bandage in an emergency. Jane's woggle (a band holding the tie) was made by hand. Some girls made woggles from leather, cord or items from nature such as gumnuts. The leather belt with the Girl Guide buckle bears a metal badge obtained at Britannia Park, the Victorian Guide camping ground at Yarra Junction. Her white lanyard (indicating she was a Patrol Leader) and brown leather pouch are attached to the belt. Metal badges pinned to the collar of the blouse are the World Guide badge on the right and the Guide Trefoil or Promise badge on the left. The tapes on the left sleeve identify the Guide Company, District and Region. Badges on the right sleeve are interest and achievement badges.jane reid, costumes, uniforms, girl guides 6th kew

Japanese Surrender Ceremony at MOROTAI on 9 Sept 1945. Japanese Officer in the dark uniform is Lieutenant General Fusataro TESHIMA, Leader of the Japanese 2nd Army. The second man is a Japanese Naval Officer Captain Toru OYAMA. The Australian Officer at the table is Lieutenant General Frank BERRYMAN, a member of Blamey's staff. An audible recording of the ceremony is apparently on the internet including Blamey's speech.Four black and white photos. 1. This image shows at least 5 Japanese Senior officers standing to attention. At their front is a Senior Australian Officer wearing a pistol belt. He has his slouch hat with slouch part down. The Australian Officer is wearing small gaitors and boots. 2. General Blamey standing to attention on left of picture. A Japanese officer is signing some paperwork. In the background can be seen a large body of troops watching. The ground they are on has been covered in some white crushed rock. 3. A senior Japanese Officer in darkish uniform with a white shirt is signing some papers using a fountain pen. He has 4 rows of ribbons on his left chest.. On the front of his hat is star. 4. A senior Japanese Officer, lighter uniform, wearing a lanyard, is signing some papers using a fountain pen. He has 3 rows of ribbons on his left chest. On his lapels are a rectangle with 3 stars on it. On the front of his hat is a light coloured badge, possible an anchor on it. ww2, japanese surrender, morotai, blamey

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details.1 Badge silver inscription and crowned eagle. gold anchor and chain in centre. 2 Badge silver bottom half is a shield top half is a crowned eagle with wings outstretched. 3 Badge gold square on a gold square off set 45 degrees in centre is a lion the rear surrounds are two crossed swords. 4 Copper badge of an eagle with large crown there is an enamel white cross in centre of a red enamelled oval the birds claws are holding a lanyard. 5 Copper shield with cross rifles in it there is numbers 64 in red enamel circle in centre a crown is between. 6 Plain star 5 point 3 cm wide 7 grey cloth silver engine the bottom has British coat of arms. 10 cm x 5 cm. 8 Uniform. Black cloth rad binding has gold 3 pips, crown with red cross. crown gold thread. copper button. 9 Cloth rosette green centre white red surrounds 5 pointed brass star number 9 in centre surmounted with a crown.badges, collection, foreign

These nine photographs of a CO’s Parade were taken on the 6th of December 1995 at the Army Survey Regiment, Fortuna, Bendigo. On this occasion CO LTCOL Duncan Burns presented the Defence Force Service Medal to SSGT Stephen Hill OAM CSM, SGT Stuart Ridge, SGT Peter Peterson and CPL Eric Nicolson for 15 years of efficient remunerated service in the Australian Army.This is a set of nine photographs taken at the CO’s Parade at the Army Survey Regiment, Fortuna, Bendigo, on the 6th of December 1995. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 1995. RSM WO1 Ken Johnston OAM MM. .2) - Photo, black & white, 1995. L to R: CAPT Tony Harder – UK Exchange Officer, CAPT Doug Arman. .3) - Photo, colour, 1995. L to R: WO2 Paul Leskovec CSM, unidentified, WO2 Kevin Kennedy, SSGT Peter Curtis, CPL John ‘JJ’ Smith, SGT Peter Peterson, CAPT Tony Harder (foreground), unidentified, SSGT Stephen Hill OAM CSM, CAPT Doug Arman (foreground). .4) - Photo, colour, 1995. L to R: MAJ Mick Banham, RSM Ken Johnston OAM MM, CAPT Tony Harder, QM CAPT Bill Griggs, SSGT Peter Curtis CPL John ‘JJ’ Smith, unidentified, SGT Peter Peterson, ADJT CAPT Brenton McDonald, CAPT Doug Arman, SSGT Stephen Hill OAM CSM, remainder unidentified. CAPT Bin Fashar Sutimin – Indonesian Exchange Officer in dark green uniform with gold lanyard. .5) - Photo, colour, 1995. L to R: CAPT Bin Fashar Sutimin – Indonesian Exchange Officer in dark green uniform with gold lanyard, unidentified (x5) SSGT Bob Thrower, unidentified SGT Peter Tuddenham, remainder unidentified. .6) - Photo, colour, 1995. L to R: RSM Ken Johnston OAM MM, ADJT CAPT Brenton McDonald, WO2 Pat Lumsden (partially obscured), CO LTCOL Duncan Burns. Defence Force Service Medal recipient - SSGT Stephen Hill OAM CSM. .7) - Photo, colour, 1995. L to R: WO2 Pat Lumsden (partially obscured), CO LTCOL Duncan Burns. Defence Force Service Medal recipient – SGT Stuart Ridge. .8) - Photo, colour, 1995. L to R: CO LTCOL Duncan Burns. Defence Force Service Medal recipient – CPL Eric Nicolson. .9) - Photo, colour, 1995. L to R: WO2 Pat Lumsden, CO LTCOL Duncan Burns. Defence Force Service Medal recipient – SGT Peter Peterson..1P to.9P – The occasion and date are annotated on the plastic sleeve and the back of the photos.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

Ribbon - Efficiency decoration instituted in 1935 - Dec 1986. Uniform issued to "BUTTERWORTH/ 15280".Service dress style - khaki colour wool/polyester fabric jacket with belt and trousers. 1. Jacket collar, with two lapel badges, gold and silver crown and shield with cannons and lettering. "ROYAL AUSTRALIAN ARMY ORDNANCE CORPS" shoulder epaulettes with silver and red metal crown rank insignia = MAJOR. Four front pockets. Two top patch pockets with button and two metal press studs on flap. Green and yellow service Ribbon above left pocket. Two lower inset pockets with button down flap. Two metal belt keepers insitu. Buttons - gold colour plastic with shank and metal ring. Buttons have raised emblem - crown and shield with three cannons. Brown colour cotton sateen fabric lining. No manufacturers label. 2. Belt - fabric with gold colour plastic buckle, leather belt keepers and brown plastic buttons. 3.Trousers - fabric with fob pocket, two side pockets and one inset back pocket with concealed button down flap. Button missing. Green colour polyester fabric libning, cream colour cotton waistband lining. Metal zipper fly with plastic button. White cotton label on waistband. 4. Lanyard - red colour cotton cord with knots.3. White cotton label with black ink print "REGIMENTAL NO./NAME" on waistband lining - handwritten black ink 'BUTTERWORTH/ 155280/ 7/ COY".uniform, army, service dress, butterworth

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A reasonably well-preserved ship’s deadeye with rust-stained wire loop-rope still attached. It retains portions of its original hemp cord and hessian wrapping. The flat sides of this thick wooden disc have three holes drilled through in a triangular configuration. The artefact is from the shipwreck of the LOCH ARD (1878). The survival of the loop-rope (wire cable) indicates it was an Upper Deadeye, connected to the shrouds (mast rigging).flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, deadeye, rigging

The Chart displays unit colour patches worn by members of the Australian military forces during world war 2. the Australian Military forces consisted of the 2nd Australian Imperial Forces and the Permanent Military ForcesDuring the world wars and the years in between, Australian soldiers wore cloth patches of various shapes and colours on their upper sleeves to indicate to which unit or formation they belonged. The use of colour patches was discontinued in 1949 when the British system of embroidered shoulder titles, formation signs and lanyards was adopted. In July 1987 colour patches were reintroduced in order to foster the Army’s heritage and are now worn on the right side of the puggaree on the slouch hat. Coloured Print of Colour Patches of the Australian Military Forces World War TwoNumbered Colour Patches and descriptions of each patch 1 to 630

Used by various oversea armed forces. Such as Chinese, Russan, Vietnamese.15 inch (30 cm) three sided fluted steel alloy pointed spike SKS rifle bayonet two colour (Aluminium and black mounting end). Missing the mounting fixure to attach the bayonet to the rifle. Dark green double woven cord Woven cord length (83 cm) attached by split ring. Woven loop at end of cord.sks, rifle, bayonet, lanyard

Used by Colour Sgt Cordwell, grandfather of John Cordwell, past President of Sub-Branch.On loan from John Cordwell's Family (past president of the Montmorency RSL)Nickel plated silver coloured brass metal military whistle and woven brown leather neck loop. The leather neck loop is attached to the body of the whistle by a small circular steel metal key ring. A metal post with a hole attaches the key ring to the whistle. The whistle has a small light brown coloured wooden pea.Premier Wire Works Melbourne Australia 1944 Marked with the Broad Arrowcordwell whistle, military, metal

Blueuniform, ww2, army

Rodgers Sheffield No. 21306equipment, c 1950, army

White(part UC040)uniform, ran

Whiteuniform, ran

Whiteuniform, ran

Reduniform, army

In the Vietnam War the 'tunnel rats' became famous. It all began on 'Operation Crimp' in January 1966 when US paratroopers and Australian infantry and engineers captured a Vietcong headquarters, in an extensive network of tunnels, some going down to four or more levels, containing munitions and 100,000 documents. 1961-1975- regimental histories - australian, operation crimp, vietcong, 1st battalion, the royal australian regiment

In the Vietnam War the 'tunnel rats' became famous. It all began on 'Operation Crimp' in January 1966 when US paratroopers and Australian infantry and engineers captured a Vietcong headquarters, in an extensive network of tunnels, some going down to four or more levels, containing munitions and 100,000 documents.vietnam war, 1961-1975- regimental histories - australian, operation crimp, 1st battalion, the royal australian regiment