Camphor oil has been used for centuries to treat a plethora of ailments. It can act as an antiseptic, pain reliever, antidepressant and even a stimulant. Camphor oil has been used as an ingredient in smelling salts for years, as well. Its most common use is for the relief of arthritic and rheumatic aches and pains, skin ailments, colds and back pain. Camphor absorbs easily into the skin and produces a cooling, soothing effect. There are also references to the treatment of ear infections. Six sided triangular brown bottle with screw cap, with oil. Label indicates Camphorated Oil bought from Frederick Lee & Sons. Handwritten on label "ear drops & rub on". "POISONOUS:-Not to be taken/CAMPHORATED OIL/Caution: To be used with care and strickly in accordance with the directions./FREDERICK LEE & SONS/(Horace L.Lee)/Resident Chemists & Foot Specialists./103 Greville Street, Prahran, S.1/PHONE LA 1038" on front label. "NOT TO BE TAKEN" imprinted on the glass deaf children australia, chemical, camphorated oil, frederick lee & sons, bottle

This item commemorates the war in Vietnam and was a gift presented to the National Vietnam Veterans Museum by the Victorian chapter of the Vietnamese Community in Australia in 2012.An olive green wine bottle with black screw cap. The label shows two armed soldiers in full pack with an Australian flag on the top left corner. Vietnamese Community in Aust - Victorian Chapter 2012/"Lest We Forget/Side By Side: Hanh Quan Phoi Hop. 1962-1975/Vietnam inscription 1961 - 1975 -- veterans -- australia, wine bottle, vietnamese community in australia, vietnamese community

Donated by Sir Henry Newland.The samovar stands 41cm high, and is 39cm wide across the handles. It is made of Sheffield plate, and dates from the late 18th century. It is supported on a square base with four cast lion’s feet attached by elaborate mounts at the corners. The main vessel or tank is circular, and set on a short columnar stand. These elements are heavily fluted. There are two elaborately decorated solid cast silver handles attached to the sides of the tank. A long spout with a cast ivory handled tap extends from the bottom of the tank. The lid is plainer, with a fluted and scalloped edge, and is capped with a finial. Inside the tank is a cylindrical immersion container for hot coals, a primitive type of heating element. There is a crest, probably that of the original owner, engraved on the shoulder of the tank above the tap. A samovar is a Russian tea urn but the College’s samovar is not a tea urn, as it does not include the stand or the teapot. Undoubtedly it was intended to provide hot water for tea, and the absence of a matching teapot indicates a cultural difference between the English and the Russians, in the way in which they went about brewing tea. It is a showpiece, intended for use and display in the reception rooms of the house. In the 18th century tea was still a rare and exotic import from the Orient, so the serving of tea was an important act of hospitality and a statement of social status.Sir Henry Newland was the College President 1929-1935Antique sheffield plated samovar with shell design and pressed rib border, finely worked casted handles, spout with swivel top, with tapered centre column, square shaped base with cast lions feet

Dance cards or Harmony Lodge (No. 203) ball held on 29 June 1915. Dance program printed on rear has provision for names. The printing of the words 'Harmony Lodge' on the front was originally in gold.Two cards of blue cardboard printed in dark blue both sides. String threaded through the hole in the top left hand corner of each card attaches a small pencil. Pencil painted white with tin metal cap attachment.harmony lodge, harmony lodge 203, dance card, st kilda balls

This camera combines 4 megapixels with 6 x optical and 3.4 digital zoom. It is powered by 4 x AA batteries - is comfortable to hold and easy to use. It also acts as a webcam when connected to a camera via USB. It has a movie feature which allows recording of movies without sound at 10 frames per second. Includes: 1. Lens cap 2. Adaptor Ring 3. 256mb Picture Card (128 photos).Top: Fujifilm digital camera S3500. Lens Cap: FinePix / Digital Camera - 4.0 mega pixels. Lens: Fujinon Zoom Lens - 1:28-3 6x optical zoom - f=6-36mm Side: xD Picture Card Bottom: N705 No. 4DL26522 / Made in Chinadigital camera

Proudly worn by soldiers of the 1st and 2nd Australian Imperial Force in both World Wars, the 'Rising Sun' badge has become an integral part of the digger tradition. The distinctive shape of the badge, worn on the upturned side of a slouch hat, is commonly identified with the spirit of Anzac. There are seven patterns of the Rising Sun. The Rising Sun has evolved over time and today Australian Army soldiers wear the seventh pattern Rising Sun.The Rising Sun badge, also known as the General Service Badge or the Australian Army Badge, is the official insignia of the Australian Army and is mostly worn on the brim of a slouch hat or, less frequently, on the front of a peaked cap for Army personnel filling certain ceremonial appointments.Timber look laminate box with gold colour metal "rising sun" badge on front. The box opens out flat and contains seven metal " rising sun " badges mounted on black felt on the right side. The left side below an image of the rising sun contains a written history of all seven badges from 1902 to the present.The Australian Armyrising sun, badge, australian army, anzac

The collection contains SEVEN ITEMS of clothing from the former SUNSHINE TECHNICAL SCHOOL of which images of SIX are individually displayed here. The clothing items are: (1) Grey wool/nylon V-neck jumper with green and red stripes bordered by thin black stripes, around neck, waist and cuffs. (2) Black cap with green panel containing a red STS logo on front of cap. (3) Green acrylic/nylon sleeveless football guernsey with wide red V-shaped band on front. Only one of the two guernsies is shown. (4) Green cotton collarless, short sleeve, and button up tracksuit top with red and black stripes around the sleeves and on both sides of the buttons. (5) Green cotton button up tracksuit short leg pants with red and black stripes along outside edge of legs. (6) Green cotton sports bib with black STS logo on front.school jumper, school cap, football guernsey, tracksuit, sports bib, school clothing, uniform, sunshine technical school

The Royal Australian Army Ordnance Corps (RAAOC) is the Corps within the Australian Army concerned with supply and administration, as well as the demolition and disposal of explosives and salvage of battle-damaged equipment. The Corps contains clerks, operator supplies (including q-store staff, warehouse staff and food technicians), petroleum operators, parachute riggers and ammunition technicians. Members of the Corps are nicknamed Roaches. Unlike other Corps within the Australian Army, there are no longer any RAAOC specific units, instead RAAOC sub-units sit within mixed units such as Combat Service Support Battalions (CSSBs) or Force Support Battalions (FSBs). RAAOC is also responsible for clerks and quartermaster store staff in all Australian Army Units.Circa 1953 to 1960. Associated with the supply chain and equipment resourcing within The Royal Australian Army. Gold and silver chrome hat corps badge. The reverse has two pin points that a stud affixes to so as to secure to a hat or cap. The top of the badge has a crown shape and the bottom is curved. There is corps writing on the badge at the bottom and surrounding sides : "Royal Australian Army Ordinance Corps". Royal Australian Army Ordinance Corps. 1953 to 1960 raaoc corps hat badge, royal australian army ordinance corps, raaoc

This bonnet is part of a collection of clothing donated to the Brighton Historical Society by Dr William and Helen Wells. It is believed to have belonged to William's grandmother Winifred Marshall (nee Hayball, 1886-1971). William's family has had a long association with Brighton, dating back to the town's earliest days in 1843 when his ancestors Robert and Eliza Hayball, who had emigrated to Melbourne two years prior, established a wattle-and-daub hut in what is now New Street, close to Tovell Street. Robert established a business as a timber merchant on the opposite side of New Street. His sons, Robert, William and Edwin took over the firm following his retirement, trading as the Hayball Bros. Hayball Court, which runs off New Street, is named after the family. Robert's son William (1855-1926) married Jessie Robertson and had four children. Their eldest, Winifred Grace Hayball (1886-1971), married Andrew Hollingsworth Marshall at the Black Street Congregational Church in 1907. They subsequently lived in Hill Street, Hawthorn, before moving into a house designed by Andrew and Winifred's brother Robert at 39 Bay Street, Brighton in 1915. Their daughter, Dorothy Marshall (1910-2000) married Robert George (Argie) Wells in 1937 at Wesley College Chapel. They lived in East Malvern until 1947, when they moved into a newly built home in Hawthorn Road, East Brighton, where they lived for the rest of their lives. Their son, William Wells (b. 1939) married Helen Pickering in 1968 and the couple have lived together in Brighton ever since.Pale pink silk bonnet (sleeping or house cap) with cream lace edging. The bonnet is embellished with oval-shaped embroidered appliqué on either side, featuring floral design in white and pale yellow, blue and green. A cream silk ribbon and a row of pale blue and green rosettes run along the top edge between the two appliquéd segments. A length of elastic is sewn through the bottom edge.wells family, winifred grace hayball, winifred grace marshall, bonnet, 1900s

With more and more woolsheds being connected to power lines, the need for electric shearing gear markedly increased from the 1960s onwards. The greater economy made electric gear an attractive proposition to many graziers. Requiring only an electric shearing motor, for small and medium scale operations, electric shearing motors were a more economical way of shearing a wool clip. The other option for graziers was Overhead shearing gear, which also required an Engine to provide shared power to a row of shearing stations. Still working, this Sunbeam Electric Shearing Motor – Heavy Duty Model, features a slow speed motor totally enclosed for protection against dust and insects. The full bearing down tube is easily removed and stored to be out of the way when not in use (not pictured). Providing 0.5 hp, which is twice the power ever needed for shearing sheep, this buffer allows for fluctuations in voltages that can occur in rural districts. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered into a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. This 0.5 horsepower vertical brushed motor air-cooled engine was designed to drive a single shearing plant. From the central cylinder which features a yellow “Sunbeam” sticker, a grey 240v power lead can be found on the left-hand side. A blue capacitor is located next to this power lead. Below, two legs extend and meet to form a foot which is fastened to a wall. On the right-hand side of the engine, a specification plate is located on the central cylinder. A yellow directional arrow sticker is located on the rotating section of the engine below the specification plate (location for photography, this section is designed to rotate and hence this sticker is not fixed in this location). At the rear of the cylinder, a plastic cap with small air cut outs protects the air-cooled engine from contaminants. At the front of the engine, the location for securing the bearing down tube is located. On the right-hand side of the lock for the bearing down tube is the handle, to which a string is often attached for switching the motor on and off by a shearer bent at the waist (not pictured). Sticker. Gold writing. Front of shearing motor “Sunbeam” Plate. Inscribed. Side of shearing motor. “Sunbeam / SHEARING MOTOR / MADE IN AUSTRALIA / 0.5 H.P. / 220/240 V / 1 PHASE A.C. / 4.0 AMPS / 50 C/S. / CONT. RTG. / 1425 R.P.M. / CLASS A INSUL / NO. J244560 / TYPE: NSB5C2/49." sheep sheering, shearing equipment, sunbeam, electric shearing motor

Donated to WHS as a box of items from Barbara RogalskiCream silk Matron's Boudoir Cap, top and edge embroidered in pink and blue silk thread. Side and front edged with 4cm Bedfordshire Lace.costume, female headwear, female underwear

From the collection of McPhee BettyA small metal case, cylindrical, containing pencil leads, with metal cap and inscription markings on sideOne Conway 3 inch refillsdomestic items, writing equipment

from the collection of Betty McPheeA small white dance card pencil with cap holding string, tasseled on end. Inscription on side in goldL and C Hardmuth, Viennadomestic items, writing equipment

This dress was worn by Dorothy Williams as a going away outfit at her wedding in 1958Light brown poplin day dress. Capped sleeves and Peter Pan collar. Pin tucks from collar to waist on each side of opening with six pearl buttons. Six press studs, one under each button. Gathered skirt with narrow belt at waist. Guipure lace in the form of daisies around collar and each side of pintucks and around skirt at hip level. Zip on left hand side. Wedding dress NA4110. Hat NA4111.costume, female

Hat belonged to Catherine (Kitty) Ann Windsor (born 23 Nov 1919 died 17 Nov 2002) in the 1930s. She was the grandmother of Rachael Cottle (Whitehorse Historical Society Secretary Aug 2011-2016). She was gate keeper at the Tunstall (Nunawading) railway gates crossing at Springvale Road during 1934 - 1952.A house was supplied for the keeper. The gates were closed to traffic from midnight till 5 a.m.Dusky pink felt skull cap shaped cap. Pearly white, gelatin sequins in the shape of a feather on one side.costume, female headwear

Three hair nets in their original packets. Two are in green packets with orange printing and a black silhouette of a womans head on the left hand side. One is Shade 2 Dark Brown; Black one is Shade 3 - Grey and White Hair; the third net is in a cream envelope with photo of woman's head and hair. The 'Ideal' cap net - mid brown.personal effects-toilet requisites, hairdressing

Cap of stiffened machined lace with two pleated 'wings' of stiffened and pleated chiffon on either side. Lace edging on hem. Pull tape ties around face.costume, female headwear

Cap Badge ,Black Watch, Royal Highlanders 1902-1935. Badge features a rayed and faceted star similar to the Star of the Order of Thistles. Upon the centre, within a wreath of thistles, an oval frosted circle bears the burnished motto: 'Nemo Me Impune Lacesset' ( Meaning no one attacks me with impunity) This is surmounted by a monarchial crown. Within the circlet the figure of St Andrew is depicted holding his cross on a frosted ground On either side of the crown bears ' The Royal Highlanders' . On the bottom of the badge a scroll with the words 'Black Watch". refer https://collection.nam.ac.uk/detail.php?acc=1963-12-74-1See "Description"

This cap potentially belonged to Ronald Edward Smith, Service number 419886. Date of birth - 30 Jun 1916 : Place of birth - MELBOURNE VIC : Place of enlistment - MELBOURNE : Next of Kin - SMITH ETHELThis hat holds representative significance as a generic RAAF officers forage cap. Further research into the potential owner could uncover other significance.Dark blue cap with medal ribbon attached to the side. RAAF eagle badge attached to peak of cap left hand side. Two buttons at peak of cap. The cap is lined with brown polished cotton twill and has a light brown cotton velveteen sweatband.Tag inside cap: 330 1944/Made in Australia / Size 1/8 Service number written in pen: 419886 (or 419856)raaf, australia, air force, cap, hat, beret, wwii, world war two

Round Compass of Alloy Material. Fold out cap with clear glass viewer. The inner top has has numerical markings 1-36. The actual compass movement also has many numerical markings & EWNS, Around the side direction indicators. Screw on attachment on side.Inscription on base,- Compass Prismatic Liquid. MK III (Aust) No 8668 - J.W.H./V. Other markings as listed in Physical Description.

White rigid ribbed peaked cap. Rural Ambulance Victoria badge on front of cap. Black plastic chin strap band above with plain gold coloured button on either end. Gold coloured plastic band in a wreath design either side of top of peak. Large red and white chequered band between the cap and the peak. Maker inscribed on plastic label inside cap.rural ambulance victoria

The photograph is from the album of Ivy Child. The homestead appears to be that of Ted and Ethel Child. The people in the photograph have not yet been identified but are most likely family members. Ivy May Child (1910 – 1989) was the daughter of Arthur Edward (Ted) Child (1878 – 1964) and Ethel May Madden (1888 – 1970). Ted Child was the son of Matthew Francis Child (1839 – 1933) and Martha Jeeves (1857 – 1926). He was the grandson of one of the early pioneers Francis Child. Ivy grew up on the family property on Childs Road and took many photographs. Most of these are glued into her photo album. The album covered the years from c1927 – 1932. Ivy married Henry William Burgess (1906 – 1968) in 1944. The photographs remain in their original state in the album with individual copies made. Sepia coloured photograph showing a group of people in the yard of a homestead. One young man on a motorbike is wearing a cap and smoking a cigarette.A woman nursing a child is in the sidecar of a motorbike while a young girl is on the pillion seat. A man wearing a hat and smoking a pipe is standing between the two motorbikes. A young man in a jacket is standing behind the motorbike with sidecar. In the distance a man and young girl are standing in the open doorway of a shed.Handwritten below the photograph in the album: SEEING THEM OFFivy child, chhild homestead, motorbike, side car

The photograph is from the album of Ivy Child. Everyone in the photograph is well dressed for a day of visiting. The woman without the hat standing to the LHS appears to be Ethel Child.The location is most likely the road outside the Child Family Homestead of Ted and Ethel Child - Childs Road. Ivy May Child (1910 – 1989) was the daughter of Arthur Edward (Ted) Child (1878 – 1964) and Ethel May Madden (1888 – 1970). Ted Child was the son of Matthew Francis Child (1839 – 1933) and Martha Jeeves (1857 – 1926). He was the grandson of one of the early pioneers Francis Child. Ivy grew up on the family property on Childs Road and took many photographs. Most of these are glued into her photo album. The album covered the years from c1927 – 1932. Ivy married Henry William Burgess (1906 – 1968) in 1944. The photographs remain in their original state in the album with individual copies made. Sepia coloured photograph showing a group of people on a dirt road. A motorbike with side car is in the foreground with a woman and baby in the side car and a young woman standing beside it. Another motorbike is behind this with a young man wearing a cap sitting on it. A man wearing a hat is at the rear of the motorbike with side car and a woman without a hat is standing to the LHS. ethel child, motorbike, side car, child family homestead, kalorama

A 'Sterling' 'Vim' tennis racquet by United States Athletic Co. Laminated convex throat and fine grooved octagonal handle. Leather end wrap. Cloth butt cap. The two model names featured across throat, one on each both side. On side of shaft inscription: 'MADE BY/UNITED STATES ATHLETIC CO/2222 DIVERSEY PARKWAY/CHICAGO, ILLINOIS. Strings Materials: Wood, Lacquer, Metal, Glue, Nylon, Leather, String, Ink, Clothtennis

A 'Classic' tennis racquet with oval head, composite concave throat. Plastic reinforcements and string whipping around shoulders. Octagonal cross-hatched handle with leather end wrap and butt cap. Model name and crown motif imprinted as decal along throat on obverse. Printed along side of shaft: FRAME MADE BY/S.A.R. PERSENICO & C./CHIAVENNA (ITALY). Care instructions printed on end cap. Materials: Wood, Lacquer, Metal, Glue, Gut, Ink, String, Plastic, Leathertennis

Wooden, slotted handle racquet with a 14 1/2 inch head. Partial inscription across top of racquet head on obverse: 'LEE SPECIA...', i.e. a 'Lee Special' model racquet. Inscription across neck of obverse: HARRY C. LEE & CO./NEW YORK. Company monogram across neck of reverse, and stamped on leather butt cap: L&C/TRADEMARK. Manufacturing and patent information along the sides of the handle, with the numbers '403' and '14 1/2' punched in. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquertennis

Wooden, slotted handle racquet with a 14 inch head. 'AUSTRALASIAN' model, as inscribed across top of racquet head on obverse. Inscription across neck of obverse: HARRY C. LEE & CO./NEW YORK. Company monogram across neck of reverse, and stamped on leather butt cap: L&C/TRADEMARK. Manufacturing and patent information along the sides of the handle, with the numbers '247' and '14' punched in. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquer, Cloth tapetennis