Showing 707 items
matching speed
-
Parks Victoria - Wilsons Promontory Lightstation
Container, Ventometer
The cylindrical cardboard container with lid formerly contained a ventometer, a small simple tool for measuring wind speed. It consisted of a clear tube containing a small diaphragm which had a hole in the bottom for wind to enter. Once the wind entered the tube it pushed up the diaphragm, indicating the rate of velocity. Ventometers were common devices that have since been replaced by more sophisticated measuring equipment, such as digital air speed meters. Further information on this particular example, including perhaps the name of the manufacturer, may survive on the container but this has not been recorded. The small simple tool for measuring wind speed pre-dates the electronic devices at Gabo Island.Tubed shaped cardboard container with lid to house instrument for measuring. (instrument is missing) Inscriptions and illustrations on exterior. -
Flagstaff Hill Maritime Museum and Village
Camera
Camera fold away which expands out along tracks. Adjustment for distance, light aperture and lens speed. Manufactured in Rochester NY USA Model No 2-c, Kodak Jr Film is inserted and removed around 2 rollers at back of cameraflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Melbourne Tram Museum
Slide, Keith Kings, 2/01/1969 12:00:00 AM
35mm Kodak white cardboard colour slide by Keith Kings of SW6 850, the class leader at Preston Workshops 2/1/1969. Has adverts for Marshall batteries, Warren Smith Motors and High Speed Gas. See Inscriptions for further notes.Keith Kings stamp and number "45-4", with details of exposure. in ink "MMTB No. SW6 850, the prototype luxury tram built by Preston Workshops / Preston WS. Note One Piece steel frame full drop saloon windows (as in SW5 cars 840-849"trams, tramways, sw6 class, preston workshops, tram 850 -
Melbourne Tram Museum
Pamphlet, The Met, "Light Rail Articulated Vehicles", c1995
Pamphlet - 2 fold - titled "Light Rail Articulated Vehicles", featuring B2 2112 outside Luna Park St Kilda. Gives details of the tram, builder (ABB Transportation), The Met, specifications, including speed and an interior photo. Published by the PTC and The Mettrams, tramways, b class, ptc, the met, st kilda, luna park, abb transportation, tram 2112 -
St Kilda Historical Society
Ephemera - Ticket, Permit to play ice hockey, 1953
Permit issued by Victorian Ice Hockey and Speed Skating Association to B Reed to play ice hockey with Pirates Club in 1953.Pink card printed in black on both sides, with handwritten annotations in black ink and a stamped ticket numberAnnotated in writing that the permit applies to ice hockey played with the 'Pirates' Ice Hockey Club, during the '1953' season, and was issued to 'B Reed'. It was signed by the Secretary (name indecipherable) on '24.4.53'. Stamped on the back 'No. 907'ice hockey, pirates ice hockey club, victorian ice hockey association -
Kiewa Valley Historical Society
DVD SEC Victoria Promotional, Kiewa Capers Compilation, circa 1990
The construction and development of the Kiewa Hydro scheme showing its construction and the people in work and play during its duration. It also shows the development of Mt Beauty and Bogong townships. The films were used as News Reels, Tourist Information and Entertainment.This VHS is a snap shot in time (1990) when the Kiewa Valley was still relatively under populated and holiday houses owned by city bound workers was still relatively insignificant. As more and more holiday makers retire to a small but friendly region(Kiewa Valley and Mount Beauty) the increase in visitor numbers will affect the local rural bush scene more and more. The changes that will occur (in time) can be measured against the scenes presented in this video. The additional resources provided by the State Electricity Commission of Victoria of "alpine bush" fire control and management, together with an ongoing educational scheme for school children in learning about what constitutes the Alpine country's unique environment, are a very important offshoot, benefitting to both the communitieThe DVD is nestled within a formed inner structure (case), which not only prevents the disc from moving to and fro but also unnecessary intrusion of foreign particles.This DVD is a TDK data/video recordable single sided 4.7 GB disc.It is a 1-16x speed.audio visual, kiewa history, educational -
Kiewa Valley Historical Society
DVD - Kiewa Hydro Electricity Scheme, KIEWA, Circa 1990
This DVD is a digital reproduction of a VHS produced by the State Electricity Commission of Victoria, to show the pristine state of the Kiewa River and Valley post the completion of the Kiewa Hydro Electricity Scheme (Circa 1950s), The late 1970s on wards was the beginning of deeper social scrutineering by pro environmental groups such as the Australian Wilderness Society (1976) and the Greens (political Party), before, during and after the construction phases of any man made structures in forest/bush areas which may or could damage or adversely affect the natural flora and fauna of sites. This promotional VHS, which was produced in the 1990s, was to project that unlike the Tasmanian State Electricity Commission (Franklin Dam issue), the Victorian State Electricity Commission acted in a way to protect the environment to the maximum level possible. With the passage of time since, and the issue of the global push to minimise carbon pollution, and as an alternative to coal fired power stations, the use of hydro electricity can now be seen as a highly efficient alternative to "coal powered" electricity. This item provids a snap shot in time (1990) when the Kiewa Valley was still relatively under populated and holiday houses owned by city bound workers was still relatively insignificant. As more and more holiday makers retire to a small but friendly region(Kiewa Valley and Mount Beauty) the increase in visitor numbers will affect the local rural bush scene more and more. The changes that will occur (in time) can be measured against the scenes presented in this video. The additional resources provided by the State Electricity Commission of Victoria to "alpine bush" fire control and management, together with an ongoing educational scheme for school children in learning about what constitutes the Alpine country's unique environment, are a very important offshoot, benefitting to both the communities within the Kiewa Valley and regional Victoria. The DVD is nestled within a formed inner structure (case), which not only prevents the disc from moving to and fro but also unnecessary intrusion of foreign particles.This DVD is a TDK data/video recordable single sided 4.7 GB disc.It is a 1-16x speed."KIEWA" on disc.secv, kiewa valley, dale-bromley, cy-duff, chris- harding, michael-glucz, forestation education, wilderness photography, nature film. -
Whitehorse Historical Society Inc.
Equipment - Camera, 1965 - 1968
Used by donors mother in law Irene Standfield up until the 1980s.Kodak Instamatic 104 camera (126 film) in box (.2) and carry bag (0.3). It has a fixed focus and shutter speed. It takes a square rotating flash cube on top. A film forward lever an the left hand side top and the shutter release on the front.Kodak Instamatic Camera 104photography, cameras -
Eltham District Historical Society Inc
Photograph, Looking up Brougham Street towards Bolton Street, Eltham, c.1989, 1989c
The Shire of Eltham was introducing a number of speed humps throughout the shire around this time period and took a photographic record of various new installations.Colour photographeltham, streets, bolton steet, brougham steet, infrastructure, speed humps -
Eltham District Historical Society Inc
Photograph, Looking east near 51 Airlie Road, Montmorency, c.1989, 1989c
The Shire of Eltham was introducing a number of speed humps throughout the shire around this time period and took a photographic record of various new installations.Colour photographinfrastructure, airlie road, montmorency, speed humps, streets -
Eltham District Historical Society Inc
Photograph, Looking east near 51 Airlie Road, Montmorency, c.1989, 1989c
The Shire of Eltham was introducing a number of speed humps throughout the shire around this time period and took a photographic record of various new installations.Colour photographinfrastructure, airlie road, montmorency, speed humps, streets -
Eltham District Historical Society Inc
Photograph, Looking west near 58 Airlie Road, Montmorency, c.1989, 1989c
The Shire of Eltham was introducing a number of speed humps throughout the shire around this time period and took a photographic record of various new installations.Colour photographinfrastructure, airlie road, montmorency, speed humps, streets -
Warrnambool and District Historical Society Inc.
Book, The Holy Bible, 1914
This Bible was given in March 1916 to Private Henry Havelock Rogers (1895-1917), the son of Joseph and Ellen Rogers of Warrnambool. He left Australia in April 1916 as a member of the 14th Battalion (17 Reinforcement Group) and died in France in April 1917 as a result of wounds. The cousins named on the card were the three older children of Arthur and Agnes Rogers, also of Warrnambool. Joseph and Arthur Rogers were brothers. The Bible was found in the MacDonald Street, South Warrnambool home of Bill Rogers, another son of Arthur and Agnes Rogers not born until the 1920s (deceased estate item). This item has a particular poignancy as it was given to a Warrnambool World War One soldier who was killed in action. Perhaps he carried the Bible with him and it was returned to his family after his death. This is a brown leather-covered book of 822 pages. The cover extends over the edges of the pages and has gold lettering on the front cover and spine. The pages are gilt-edged and there are several colour maps at the end of the book. There is a blue ribbon marker encased in the binding. The inscription is on a loose card and is handwritten in black ink. ‘To Dear Harry Wishing Him God Speed & Safe Return From His Loving Uncle, Aunt And Cousins, Rita, Alfie & Charlie’. henry rogers, rogers families of south warrnambool, world war one and warrnambool -
Bendigo Military Museum
Document - NAVIGATION DOCUMENT, Navigation Log, 22.11.1942
Navigation Log for flight by A.T.S in Aeroplane W - 2275 operating under order No 18/40. Details filled in on form RAAF A.84. Form filled in by F/L Smith, Sgt Jones, P/O Jones. Part of the Frederick Gardner DFC RAAF No 410533 collection. Refer Cat No 3536P for his service details.Four page Proforma printed in black ink, handwritten details in pencil on pages 1,2,3.The hand written information pages 1,2,3, details a flight from Pt Nepean to Woodside, weather, wind speed and observation points noted.training flight, raaf, w - 2275 -
Whitehorse Historical Society Inc.
Equipment - Camera, 1954 - 1965
Between 1954 =- 1965 thousands of these cameras were made. This contributed to the recovery of Germany after World War 2Agfa Clack Camera in green plastic case. It is a bulky looking moulded plastic camera using 120 roll film. The enclosure holding the film is made of steel and is held to the main body by a large rotated key at bottom. The exposure counter is on the lower back. The camera takes eight 6cm x 9cm photos on the 120- film.|a small view finder is fitted on the top of the camera. It has two speeds B (bulb( for long exposures and M for standard photos. Speed is approx 1/30 second with two aperture settings - f11 = overcast; and f12.5 = sun. Six pieces make up the set.AGFA Agfa Camera -Werk AG Clackphotography, cameras -
Rutherglen RSL Sub-Branch
Photograph - Black and white, framed, c. 1990
Framed black and white photograph of two restored WWII aircraft. Typed label at the bottom of the frame reads: "Two restored second world war aircraft flying over Albury area June 1990. Top: Wirraway Intermediate Trainer, built by Commonwealth Aircraft Corporation (CAC) in Australia under licence. 600 H.P. Pratt and Whitney wasp engine also built by CAC under licence. Top speed 200mph range 640 miles. Bottom: American Kittyhawk Fighter Bomber. Flown by RAAF in the Middle East and South West Pacific Areas. Top speed 355m.p.h. at 20,000 feet."kittyhawk, bombers, aircraft, pilots, world war 2 -
Flagstaff Hill Maritime Museum and Village
Equipment - Ship's Telegraph section, Chadburn & Sons, 1875-1898
This is the Bridge Section of a ship’s telegraph and is a Duplex Gong model, made by Chadburn & Son of Liverpool. This duplex gong model would sound two signals whenever the navigational commands were given by the ship’s pilot to change the speed or direction. The ship’s telegraph was installed on Flagstaff Hill’s exhibit of the 1909 Hobart, Tasmania, ferry “SS Rowitta” installed in 1975 and enjoyed for more than 40 years. Communication between the ship’s pilot and the engine room in the late 19th century to the mid-20th-century was made with a system called an Engine Order Telegraph (E.O.T.) or ship’s telegraph. The equipment has two parts, the Bridge Section and the Engine Room Section. The Bridge Section is usually mounted onto a pedestal, and the Engine Room Section is attached to a vertical surface. The standard marine commands are printed or stamped around the face of the dial and indicated by a pointer or arrow that is usually moved by a rotating brass section or handle. The ship’s pilot stationed on the Bridge of a vessel sends his Orders for speed and direction to the Engine Room with the E.O.T. He moves the lever or levers, depending on the number of engines the ship has, to change the indicator on the Bridge Section’s dial to point in the new direction and speed of travel. This change causes the Orders to be duplicated on the Engine Room Section’s dial and a bell or bells to signal the change at the same time. The engineer then adjusts the ship’s engines and steering equipment to follow the pilot’s Order. CHADBURN & SON, Liverpool- Chadburn Brothers, William and C.H., were joint inventors and well-established makers of optical and scientific instruments and marine gauges. The firm was granted the Prince Albert Royal Warrant in the late 19th century. In 1870 William Chadburn applied for a patent for his navigational communication device for use on ships. By 1875 Chadburn & Son was producing the brass Engine Order Telegraph in its plant at 71 Lord Street, Liverpool. In 1911 the ship RMS Titanic was launched, fitted with Chadburn & Sons E.O.T. The Chadburn Ship Telegraph Company Limited was registered in 1898 to take over Chadburn & Sons. In 1903 a large factory at Bootle, near Liverpool, and their products were being sold overseas. In 1920 electric-powered telegraphs were developed. In 1944 the name changed to Chadburn’s (Liverpool) Limited. In 1968 the company became Chadburn Bloctube Ltd. In 2000 the company, now Bloctube Marine Limited, was still manufacturing ship telegraphs. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. This Bridge section of a ship’s Engine Order Telegraph, used with an Engine Room section, represents late-19th century change and progress in communication and navigation at sea. This type of equipment was still in use in the mid-20th century. The object is significant for its association with its maker, Chadburn & Son, of Liverpool, a well-known marine instrument maker whose work was recognised by English Royalty, and whose products were selected to supply similar equipment for use on the RMS Titanic. This ship’s telegraph is connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Bridge section of a Ship’s Telegraph or Engine Order Telegraph (E.O.T.). The round double-sided, painted glass dial is contained within a brass case behind glass. It is fitted onto an outward tapering brass pedestal with a round base. The brass indicator arrows between the handles point simultaneously to both sides of the dial when moved. An oval brass maker’s plate is attached to the top of the case. The dial’s faces have inscriptions that indicate speed and direction, and the front face and plate include the maker’s details. A serial number is stamped on the collar where the dial is fitted to the pedestal. The ship’s telegraph is a Duplex Gong model, made by Chadburn & Son of Liverpool. Dial, maker’s details: “PATENT “DUPLEX GONG” TELEGRAPH / CHADBURN & SON / TELEGRAPH WORKS / PATENTEES & MANUFACTURERS / 11 WATERLOO ROAD / LIVERPOOL” LONDON / 105 FENCHURCH STREET” “NEWCASTLE / 85 QUAY + SIDE” “GLASGOW / 69 ANDERSON QUAY” “PATENT” Dial instructions: “FULL / HALF/ SLOW / FINISHED WITH ENGINES / STOP STAND BY / SLOW / HALF / FULL / ASTERN / AHEAD” Maker’s plate: “CHADBURN / & SON / PATENT / LIVERPOOL” Serial number: “22073”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, engine order telegraph, e.o.t., navigational instrument, communication device, ship’s telegraph, engine room section, bridge section, rms titanic, chadburn & son, chadburn brothers, william chadburn, chadburn ship telegraph company, chadburns, duplex gong, liverpool, ss rowitta, navigation, marine technology, pilot’s orders, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance -
Learmonth and District Historical Society Inc.
Wringer / Mangle, G.H.Nicoll & Co.-Dundee, Circa late 1800
Mangles were used to speed up the process of drying clothes by removing excess water.Unfortunately the history of this particular mangle is not known nor where it was used .An example of early laundry equipment.This Mangle constists of two wooden rollers on a flat ledge,supported by an iron frame.On the side is a large wheel with handle,to turn the rollers,.at the top is a wheel to tighten the roller pressure.G.H.Nicoll & Co. Dundee.ironmongers.laundry equipment.mecanical device -
Federation University Historical Collection
Scientific Instument, Anemometer, 6 Cup Model: Serial No. AM1-6-8875, c1975-1980
An anemometer is intended for determining velocity distribution over an area or in a boundary layer. This item was purchased by Mechanical Engineering upon the request of Dr Len Cubitt, to determine wind speed at various heights above the ground. Investigation related to wind energy harnessing projects, including that undertaken by MARS Industries in Ballarat. The 6-cup anemometer had a marked superiority in tests over the 3-cup anemometer and also had lower starting speeds.Anemometer in a case complete with mounting blocks, but without electric leads for connecting the black finished wood case which also incorporates pulse counters and connections for power supply and for other logging instruments. Serial Number AM1-6-8875 Name Plate on lid between clasps. 'RIMCO" RAUCHFUSS INST & STAFF Pty Ltd 12 Monomeath Drive, Mitcham, Vic. 3132" scientific instrument, anemometer, len cubitt, mechanical engineering, energy harnessing projects, starting speeds -
Eltham District Historical Society Inc
Slide - Photograph, Airlie Road, Montmorency, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (4 of 11) Mount - whiteProcess Date "Apr M"airlie road, infrastructure, montmorency, roads, speedhumps -
Eltham District Historical Society Inc
Slide - Photograph, Kangaroo Ground-St Andrews Road, Panton Hill, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (4 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, bishops road, panton hill, roundabout, merritts road, kangaroo ground-st andrews road -
Eltham District Historical Society Inc
Slide - Photograph, Dunstan Drive, Hurstbridge, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (1 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, chicane, dunstan drive, hurstbridge -
Eltham District Historical Society Inc
Slide - Photograph, Airlie Road, Montmorency, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (1 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, airlie road, montmorency, speedhumps -
Eltham District Historical Society Inc
Slide - Photograph, Airlie Road, Montmorency, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (1 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, airlie road, montmorency, speedhumps -
Eltham District Historical Society Inc
Slide - Photograph, Airlie Road, Montmorency, c.Apr. 1988
The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (2 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, airlie road, montmorency, speedhumps -
Bendigo Historical Society Inc.
Document - AULSEBROOK COLLECTION: THE ROYAL CROWN COLA GOLD CUP PROGRAM, 1974
The Royal Crown Cola Gold Cup: 1974 Souvenir program -Victorian Speed Boat Club Race Circuit, Derrinal Pool, Lake Eppalock, Victoria -A5 paper booklet, typed, -Booklet has: brief history and explaination of the event, ads, and program of events taking place, -
Whitehorse Historical Society Inc.
Equipment - Camera, C1939
Purchased by Ted Arrowsmith in 1940 from chemist at 596 Station Street Box Hill, when he lived at 35 Cambridge Street Box Hill. Used by him until the 1960s. Carried throughout Australia and the South West Pacific War Zone in the R.A.A.F between 1942 and 1946.Black folding bellows camera.AGFA 127. Folds back into a narrow case with handle. Instruction book included.|Agfa - Bilinar lens - aperture f11to f22. Two view finders one Portrait and other Landscape. Fixed speed of 1/30th second plus time exposure.AGFA - Bilinar. Made in germany.photography, cameras -
Orbost & District Historical Society
woomera
A woomera is a wooden Australian Aboriginal spear-throwing device . It is an extension of the human arm that enables a spear to travel at a greater speed and force than possible with the unaided arm.The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This woomera is an example of an implement used by early Indigenous people.A flat hand-made dish like wooden spear thrower with curved edges. It has a small spike tied at one end and hardened black gum at the other.woomera aboriginal hunting spear-thrower -
Ballarat Tramway Museum
Document - Instruction, "Jelbart Road Roller"
Instruction of starting, adjustments, fuel, speed, operation, maintenance, air valve timing, and lubrication of the SEC Jelbart Road Roller. This item is now at the Bylands Tramway Museum.Yields information about the operation of the SECV Ballarat Road roller supplied by Jelbart.Four quarto sheets, stapled in top left hand corner.secv, ballarat, jelbart, instructions, road roller -
Bendigo Historical Society Inc.
Document - MINING IN BENDIGO COLLECTION: WORKING MODELS OF HIGH-SPEED STEAM ENGINES
Set of six cardboard cards modelsof valve and piston motions of high speed steam engines. Produced by Thomas Jomes and T Gilbert Jones. Printed document titled: Working Models of High-speed Steam Engines, Series No. 3 by T. Jones, M. I. Mech. E. and T. Gilbert Jones, M. Sc., Wh. Sc., A. M. Inst. E. E. There is a reduced facsimile of Model No. 6. The 'Willans' Central-Valve Single-Acting Compound Engine, a description on using the models, a List of Models, Special Engineering Publications, Working Models and The 'X' Series of Cardboard Models. Also for full particulars sned to UK.education, tertiary, models for engineering students., working models of high-speed steam engines series no 3, westinghouse, belliss, erith, clayton, willans