Annie Aurelia Jones was born on 22 November 1903 at Buninyong. She was appointed to the staff of the Ballarat School of Mines in 1921 as a Typist and retrenched on 31 December 1922. She was reappointed to the staff on 25 May 1923 as a junior clerk. She retired from the Ballarat School of Mines on 18 July 1962. Annie Jones died on 05 January 1984 at Melbourne, and is buried in Buninyong Cemetery. . Ruby Helen Lonie was born on 09 July 1895 at Ballarat, the daughter of Hugh Lonie of Rothesay, Scotland and Jan McLean from Ballarat. Ruby Lonie was employed on the administrative staff of the Ballarat School of Mines from 1914 to May 1960. She died on 23 December 1979 at Ballarat. The Ballarat School of Mines Annual Report 1935 reported: " I also desire to make special reference to the splendid work performed by Miss R.H. Lonie and Miss A.A. Jones in carrying on the work of the Office during the late Mr Robinson's illness and since his death. The highest praise is due to them for the excellent services they have rendered and I feel very strongly that every effort should be made to obtain a grant from the Department in recognition of the additional services they were called upon to perform."Four typed quarto pages relating to the salary of Miss Ruby Lonie and Miss Annie A. Smith of the Ballarat School of Mines. In 1948 Miss Lonie had been on the clerical staff for 34 years and Miss A.A. Jones for 26 years. .1) Dated 31/05/1948 .2) 17/06/1948 .3) 05/05/1948 .4) 11/05/1948ballarat school of mines, r.h. lonie, lonie, ruby lonie, kittson, j.f. kittson, ferguson, f.e. ferguson, a.a. jones, annie jones, university women

PRESENTED TO JOHN LEWIS ESQ. BY A FEW OF THE SHAREHOLDERS IN THE NEW NORTH CLUNES QUARTZ MINING CO. IN RECOGNITION OF HIS SKILFUL, ECONOMICAL AND HONOURABLE MANAGEMENT OF THE COMPANY MINE FOR NINE YEARS, DURING WHICH PERIOD THE SHAREHOLDERS RECEIVED IN DIVIDENDS Pounds 450,000 BALLARAT OCTOBER 1876ORNATE SILVER TEA & COFFEE SERVICE COMPRISING; .1 TEAPOT .2 COFFEE POT .3 SUGAR BOWL .4 CREAM JUG .5 CIRCULAR TRAYINSCRIPTION ON TRAY: Presented to John Lewis Esq. By a few of the shareholders in the New North Clunes Quartz Mining Co. In recognition of his skilful economical and honourable management of the Company mine for nine years during which period the shareholders received in dividends 460,000 Pounds Ballarat October 1876local history, metalcraft, silverware, mining, lewis, john

Donated by Mrs Robyn Adams, daughter of booklet owner, a wool grower named Victor Clyde. Clyde operated in North-Eastern Victoria.Paper booklet bound with three staples on spine. White/off-white colour with dark blue text. Heading at the top reads -GOLDSBROUGH MORT / AND COMPANY LIMITED-. Text at the bottom of the page reads -WOOL HAND-BOOKS and / WAYBILLS-. Inside front cover and first two pags are notes on how to use the book and how to prepare a wool bale for transport. Booklet is made up of pages with carbon paper copying, removable sheets upon which bale details can be described, coloured yellow and blue. First yellow page has been filled in by owner. Inside back cover has list of things not to do when using booklet. Back cover has an image of the wool warehouse.mrs robyn adams, wool transport, wool auction, wool sales, wool growing, waybills, elder smith goldsbrough mort limited, dalgety and company limited elder smith goldsbrough mort limited, goldsbrough, mort and company limited

This photo is thought to have been taken at the time of Alfred Mica Smith's retirement from the Ballarat School of Mines. It is most probably also the unveiling of the Max Meldrum portrait of Smith. Alfred Mica Smith retired from the Ballarat School of Mines in 1922 after an association of 41 years and aged 78 years. At the August meeting of the Ballarat School of Mines Council in 1881 it was resolved that 'Alfred Mica Smith Esq., B.Sc., be appointed Professor in Chemistry and Metallurgy and be Superintendent of the Laboratories, for the period of twelve months at a stipend of five hundred pounds per annum, and to commence duty as soon as possible'. (signed: James Oddie, Vice-President) Smith played a major role in the years of 1887-1893 when SMB was affiliated with Melbourne University. In 1912 he became Professor of Metallurgy and received an annual salary of 250 pounds. Alfred Mica Smith presented many scholarly papers, gave evidence at government enquiries into the safety of mines and became an authority on mine safety and ventilation. He was on the Mines Ventilation Board. Professor Smith was the public analyst for the City of Ballarat and Town of Ballarat East, as well as to a number of other boroughs and shires. He was also Chief juror to the Adelaide International Exhibition, chemical section. He provided information to the Royal Commission on gold mining (1889, 1891), and was President to the chemistry section of Australian Association for the Advancement of Science, Associate of American and Australasian Institute of Mining Engineering, Member of the Science Faculty Melbourne University, and Hon. Life Member of the Miner Managers' Association of Australia. He also was involved in many educational and community affairs such as President of the SMB Students' Association, President of the Ballarat Science Society, first President of the Ballarat Camera Club, Vice President of the Field Naturalists' Club, and he presented Ballaarat Fine Art Gallery with his collection of paintings and porcelain ware. His legacies include the mutual regard between him and his students, the many tributes by former students, the Mica Smith scholarship (established in 1923) and now known as the Corbould-Mica Smith Travelling Scholarship, his portrait in oils by noted artist Max Meldrum, and the marble bust of Smith sculptured by Paul Montford. Money for a scholarship in sanitary science at the University of Manchester in the name of his uncle R. A. Smith was left being set up in 1928. Smith died of cancer on 14 May 1926 and his remains, cremated at Springvale, were interred in the Ballaarat New Cemetery. See http://guerin.ballarat.edu.au/curator/honour-roll/honourroll_Smith,%20Alfred%20Mica.shtml Black and white mounted photograph showing a number of men sitting around two dining tables at Craig's Royal Hotel in Ballarat. Professor Alfred Mica Smith of the Ballarat School of Mines is standing 15 from the left, and is the subject of the painting on an easel to the left. The painting was presented to the Ballarat Fine Art GalleryLower right of mount 'Victa Studios Ballarat' Verso (typed and glued on): Presentation to professor Mica Smith, Craig's Hotelballarat school of mines, craig's hotel, craig's royal hotel, alfred mica smith, art gallery of ballarat, ballarat fine art gallery, portrait, frederick martell, daniel walker

Elizabeth Wilson met James Henry Courtney at the annual Lord Mayor's Ball on 28 August 1890. In 1892, Capt James Courtney moved to 'Courtland' an architect-designed house at 31 Jenkin Street, Northcote. James married Elizabeth at Nth Fitzroy. Several years later they moved to 108 McKean Street, Nth Fitzrory. Capt and Mrs Courtney were guests at the official opening of the Australian Parliament on 9 May 1901, the reception at the Exhibition Building that evening, and the Royal Review at Flemington the following day. Finally they moved to 'Lumeah', a brick villa at 11 Belmont Avenue, Kew.Black silk floor length skirt with black lining and internal tapes. The skirt is distinguished by a gathered hem giving the impression of ruffles. With the donation, there is also an accompanying group of copied photographs of the Courtney family, including one which shows Elizabeth Courtney, the owner of the skirt. The skirt was donated by Frances Courtney, a descendant by marriage of the original owner. women's clothing - 1890s, australian fashion - 1890s, skirts - 1890s, elizabeth courtney (nee wilson), 11 belmont avenue (kew), capt james henry courtney, elizabeth jane courtney (nee wilson), lumeah - 11 belmont avenue - kew (vic)

Professor Ferdinand Krause lectered at the Ballarat School of Mines from 1880-1995. His descendant returned to Ballarat, visiting the new campus at Mt Helen. The information on this photograph was provided by E.J. Tippett. There is a possibility the subjects of the photo are descendants of Herbert Krause.Descendants of Prof. F.M. Krause stand in front of a battery stamper that had been used at the Ballarat School of Mines, and transferred to Mt Helen around 1969. The construction of the first buildings of the new Mt Helen campus are evident in the background. Prof Krause's son stand 2nd from the right, Phil Day is second from the left.ballarat institute of advanced education, fm krause, mount helen, ej tippett, herbert krause, derek krause

Booklet: 226 page Mines Act 1928 document includes suggested form of consent to the issue of a Mining Lease, blank form letter from Dept. Mines about fencing and gates, a bill to amend the Mines Acts, 1952.MCCOLL RANKIN AND STANSISTREETorganization, business, gold mines act, mccoll rankin and stansistreet, mines act1928 no. 3737

Commercially-operated boat tours on the Maribyrnong and Yarra Rivers in Melbourne were a major tourist attraction, especially in the first half of the twentieth century. A number of companies ran ferries and motor-launches to locations such as the Riverview Tea Gardens (1909-1947) at Ascot Vale, and the Hawthorn Tea Gardens on the corner of Power Street and Riversdale Road. One of the families which ran these services was Hicks Bros, which from circa 1921 operated a ferry service from Princess Walk (Melbourne) to Studley Park. This is one of a series of 17 black and white undated photographic proofs donated to the Kew Historical Society in 2013 by the Queenscliffe Historical Museum. The series includes images of individuals, tea rooms, ferries, motor launches, ocean liners and tugs. In 1953, the owner of Hicks Bros was involved in an inquest into the drowning of a Ukrainian tourist on a ferry operated by Melbourne Ferries, a rival firm. In published reports of the inquest, reference is made to a number of photographs taken by Robert Irvine Atchison, part-owner of Hicks Bros. As the reverse of the photographs indicates copyright is held by the State of Victoria, the collection may have derived from that year.Historically significant and rare image of one of the major tour boat services which operated on the Yarra River.Faded black and white photographic proof of a ferry owned by Hicks Bros on the River Yarra at Princess Walk. The ferry has signage confirming the company (Hicks Bros Launches) and the destinations (Studley Park, Hawthorn Tea Rooms). A man, probably Robert Atchison, co-owner of the ferry service, in a captain's hat is selling tickets. Above the roof line of the ferry can be seen the boat houses on the opposite bank. ferries, motor launches, yarra river, maribyrnong river, studley park, princess walk, riverview tea gardens, hawthorn tea gardens, tourism - melbourne (vic.), hicks bros, hicks bros launches

Correspondence relating to the Ballarat School of Mines. ballarat school of mines, e.j. barker, jack barker, harold trudinger, prize night, fees, t.g. seymour, correspondence, graduation, ballarat civic hall, floor plan, e.a. bald, royal australian chemical institute, open night

Exterior views of the Clunes School of Mines/clunes school of mines, schools of mines, clunes

Four students of the Ballarat School of Minesgordon hale, ballarat school of mines, awards, trophy

Ballarat School of Mines stickpin and cufflinksballarat school of mines stickpin, ballarat school of mines cufflinks, coat of arms, costume accessories

Replica M19 Anti-Vehicle Mineammunition, vietnam, army

BLACK AND WHITE PHOTOGRAPH. AT WALFRAM MINE.photograph, person, male / female, black and white photograph walfram mine

Postcard.Central Deborah Mine, Bendigo. No. 19.

Alteration of regulations - mines Acts 1892.government, state, mines act

Mines Act 1890 - general rules.Vic. Govt.government, state, mines act, mines act, mining, gold mining

Colour photo of Vietcong mine damagephotograph, colour

A PHOTOGRAPH OF THE YANKEE QUARTZ MINE IN CLUNES.1 SEPIA PHOTOGRAPH OF THE YANKEE QUARTZ MINING COMPANY, REGISTERED, CLUNES. .2 .3 SMALL PHOTO PRINTS OF SEPIA PHOTOGRAPH local history, photography, photographs, mining

This trophy was won by Jim Trewin in 1953 at the annual regatta in January 1953. Cyclone was a power boat.this item is associated with an annual event which no longer takes place in the Orbost district.A silver coloured metal (tin?) cup with handles on both sides mounted on a Bakelite plinth.Marlo Cup 1953 Owner Driver 1953 Won by Cyclonetrophy marlo-cup trewin-james recreation

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about Richard Routledge is that he was a tool maker and retailer that operated a business at either 23 or 64 Bull St Birmingham between 1869 to sometime in the early 20th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture was done by hand using one of these types of plane. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Moulding Plane Hollow type Marked Routledge No.8 Blade Stamped JAS Burden (owner). flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Joseph Gleave & Sons was working as a plane maker in Manchester from 1832 and was at Oldham Street from 1854 to 1868 and (as Joseph Gleave & Son) from 1868 to 1913. The company made complex wood planes of which the subject item is an early example. The company sold tools from other makers as well and was based in Oldham Street Manchester. Since that time the company has adapted and mutated and is still buying and selling tools and industrial supplies to this day. However the company stopped making complex wood planes in 1926. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into general use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims, etc. or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish.A significant tool from the late 19th to early 20th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any decorative timber item.Complex Moulding Plane, Torus Bead. Stamped J. Gleave (Maker), No 7 & T. Moody (owner)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, josphe, joseph gleave & sons, complex plane makers, carpenders tools, woodworking tool

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding opposite end has 4 screws on bottomJ Ames maker, Stamped J Heath (owner) & No 7 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath