The International Poma at Falls Creek is a 1,219 metre long Pomalift. Pomalifts are named after their inventor, Polish born French manufacturer Jean Pomagalski. The first poma at Falls Creek was called the International because it serviced the area where a F.I.S. (Fédération Internationale de Ski) international race was held in 1960. It was built over the 1968-69 summer and was ready to operate in 1969, but due to a poor snow season, the 'Inter' didn't open to the public until 1970. The author of this article, Wolfgang Lert, was a pioneer of the ski industry in the USA. He was also editor of Western Skiing, forerunner to Ski Magazine, and a founding member of the International Skiing History Association. The company name on the back of this article is Dulmison (Aust) Pty Ltd. This company was founded in c1961 and played an integral role in development of solutions for power supply problems for the Kosciusko State Park Trust and other ski fields.This article is significant because it outlines procedures for the use of an iconic chairlift used on ski fields throughout the world, including the International Poma at Falls Creek, Victoria. A two page article with images explaining how to use a Pomalift, a new addition to the ski fields in Australia.On bottom Page 2: MADE IN AUSTRALIA UNDER LICENCE BY:- DULMISON (AUSTRALIA0 PTY. LIMITEDpoma ski lifts, international poma falls creek

The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. The first race at Falls Creek was held in 1979 under the name of “Australian Birkebeiner”. It was a 21km race with about 80 participants organised by the Birkebeiner Nordic Ski Club of Mount Beauty. The course started and finished at Falls Creek Alpine Resort and took participants out into the Bogong High Plains. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2008 the Men's Winner was Ben Sim from Australia in a time of 1:42:16. The winner of the Women's event was Evelyn Dong of USA in a time of 2:00:35. This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster with an image of two stylised skiers in black moving between trees towards the audience. The red sun in the background is composed by repetition of horizontal red lines of the words "KANGAROO HOPPET 18 AUGUST 30 FALLS CREEK AUSTRALIA." The logos of Falls Creek, Tourism Victoria and Worldloppet are on the bottom right hand side. text is in blue and black.At the top: AUGUST 30 FALLS CREEK AUSTRALIA 2008 KANGAROO HOPPET 18 Email: [email protected] WEB: www.hoppet.com.au PH: +61 3 57541045kangaroo hoppet, worldloppet events, falls creek, mt. beauty

The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. The first race at Falls Creek was held in 1979 under the name of “Australian Birkebeiner”. It was a 21km race with about 80 participants organised by the Birkebeiner Nordic Ski Club of Mount Beauty. The course started and finished at Falls Creek Alpine Resort and took participants out into the Bogong High Plains. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2017 the Men's Winner was Miles Havlick from USA in a time of 1:37:24.2. The winner of the Women's event was Barbara Jezersek of Australia in a time of 1:46:59.8. This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster featuring two Australian skiers on a downhill slope with a group of spectators in the background. Logos of Worldloppet, AGL, Falls Creek, Alpine Shire Council, Victorian State Government, the Birkebeiner Nordic Ski Club and FIS are across the bottom of the poster. To the left of image: KANGAROO HOPPET 26 August 2017 42 km 21 km 7 km FALLS CREEK AUSTRALIA Beside the logos: www.hoppet.com.au Photo: Mike - www.fallscreekphotos.com.aukangaroo hoppet, worldloppet events, falls creek, mt. beauty

A copy of the Act of the Victorian Parliament relating to the property held in trust for Junior Legacy, Melbourne. It mentions that Richard Goldsmith of the United States wanted to mark his appreciation of services rendered in Australia to the armed forces of USA during World War 2 and in memory of the late David H Dureau. The company BG Corporation (of the USA), of which he was president, gave a gift of £27,059 to Junior Legacy Club of Melbourne for the purchase and fitting out of premises for the use of the club in its principal object of the care and welfare of children of deceased servicemen. Also that the building be perpetually known as the "D H Dureau Memorial Building". The first building that was purchased with the donation was 342 Swanston St, however it was found unsuitable and this Act allowed it be sold and a new building be found (293 Swanston St). The Act was cited as "Junior Legacy Melbourne (Dureau Memorial) Act 1953". The hand written note says that the Act "tells a story", is possibly part of the notes made when compiling the history of Legacy. They were in a folder of documents about the history of Legacy. Appears to have been mostly compiled by Legatee Cyril Smith as he has many hand written notes on miscellaneous pieces of paper (some are envelopes addressed to him). The notes were typed up into a summary of the History of Legacy. Also documents relating to the first time Legacy approached the public for donations in September 1956, including newspaper articles that were reprinted, a schedule of information that was approved to be released to the press, and a list of potential donors that was circulated to Legatees in the hope they could contact the ones they knew personally or professionally. The call for public donations was partially due to the purchase of the Dureau building and the need to modify the building for Legacy's needs. The documents from this folder have been added in separate records (see 01262 to 01281). The folder was part of an attempt to capture history of Legacy, generally from the 1950s. See also 01284 - Title deed of Legacy HouseThe documents provide an insight into the working of Legacy, especially in the 1950s. Legatee Cyril Smith and others were detailing their experiences and knowledge for the future.Four page copy of an Act of the Victorian parliament relating to the property held in Trust for Legacy and a hand written note.Hand written on the note: "This Victorian Act (No 5717, 1953) tells a story:"properties, dureau house

Holeproof Hosiery was a Milwaukee, Wisconsin textile firm that was founded in 1901.With extensive advertising the brand name became recognized worldwide. The business produced men's and women's hosiery, underwear, lingerie, and men's pyjamas. Holeproof Hosiery began making nylon hosiery in January 1940, starting production on 8 of its 230 machines. The hose were made of a synthetic yarn composed of derivatives of coal and iron manufactured by Du Pont. In the late 1920s, a successful hosiery manufacturer, Staley & Staley Ltd, started making ladies hosiery under licence from the Holeproof Hosiery Company in Milwaukee, USA. The company went public in 1929 and opened the first Holeproof mill at Brunswick, Victoria in 1930, becoming the first manufacturer to produce and market Australian-made self-supporting socks. During the 1930s, Holeproof revolutionised the Australian market by promoting their products as a sought-after fashion accessory. The Australian company is still in business today, owned by Pacific Brands. A unused pair of lady's silk stockings in original box. 'Holeproof' 'Truly Yours' Candlelight, size 10Box Cover: Truly Yours / by / Holeproof Side Holeproof 'Candlelight' Size 10clothing, stockings, nylons, holeproof hosiery pty ltd, lingerie, melbourne, bentleigh, cheltenham moorabbin, brunswick milwaukee usa, wisconsin

Holeproof Hosiery was a Milwaukee, Wisconsin textile firm that was founded in 1901.With extensive advertising the brand name became recognized worldwide. The business produced men's and women's hosiery, underwear, lingerie, and men's pyjamas. Holeproof Hosiery began making nylon hosiery in January 1940, starting production on 8 of its 230 machines. The hose were made of a synthetic yarn composed of derivatives of coal and iron manufactured by Du Pont. In the late 1920s, a successful hosiery manufacturer, Staley & Staley Ltd, started making ladies hosiery under licence from the Holeproof Hosiery Company in Milwaukee, USA. The company went public in 1929 and opened the first Holeproof mill at Brunswick, Victoria in 1930, becoming the first manufacturer to produce and market Australian-made self-supporting socks. During the 1930s, Holeproof revolutionised the Australian market by promoting their products as a sought-after fashion accessory. The Australian company is still in business today, owned by Pacific Brands. An unused pair of lady's nylon stockings in original box. 'Holeproof' 'For you', 'Precious' size 91/2Box Cover : For You / HOLEPROOF/ SUPERFINE EXQUISITE SHEERS Side : Precious 9 1/2 Package : 60 GUAGE / SHEER NYLON / BY / HOLEPROOF / 9 1/2 Card : Especially / For You / fromclothing, stockings, nylons, holeproof pty ltd, milwaukee usa, hosiery, fashion, melbourne, bentleigh, cheltenham moorabbin, brunswick, lingerie

Holeproof Hosiery was a Milwaukee, Wisconsin textile firm that was founded in 1901.With extensive advertising the brand name became recognized worldwide. The business produced men's and women's hosiery, underwear, lingerie, and men's pyjamas. Holeproof Hosiery began making nylon hosiery in January 1940, starting production on 8 of its 230 machines. The hose were made of a synthetic yarn composed of derivatives of coal and iron manufactured by Du Pont. In the late 1920s, a successful hosiery manufacturer, Staley & Staley Ltd, started making ladies hosiery under licence from the Holeproof Hosiery Company in Milwaukee, USA. The company went public in 1929 and opened the first Holeproof mill at Brunswick, Victoria in 1930, becoming the first manufacturer to produce and market Australian-made self-supporting socks. During the 1930s, Holeproof revolutionised the Australian market by promoting their products as a sought-after fashion accessory. The Australian company is still in business today, owned by Pacific BrandsAn unused pair of lady's stockings, in original box, 'Holeproof', 'Beauty Fit', ' Nocturn' Size 81/2 - 9 Box Cover : HOLEPROOF / Beauty Fit / LADDERPROOF MESH SHEERS STRETCH Inside Wrapper ; HOLEPROOF / Beauty Fit / LADDERPROOF STRETCH NYLONS 8 1/2 - 9clothing, stockings, nylons, hosiery, melbourne, bentleigh, cheltenham moorabbin, brunswick, holeproof pty ltd, lingerie, fashion

One of the most common centre draft kerosene lamps one can find in the USA and Canada is the Rayo. Large and sturdy, simple to use, but also notorious for being a fuel hog. This lamp was made by Bradley and Hubbard Metalworks in Chicago also Bradley and Hubbard made the “Perfection” brand lamps that look like the Rayo and are pretty much the same lamp with all parts interchangeable. The Rayo was given away to customers for free as a promotional item by the Standard Oil Company. The lamp’s huge appetite for fuel meant a hefty increase in sales of kerosene for the company and increased profits. The Rayo is a classic centre draft lamp that uses a widely available tubular wick that measures 62mm flat. It employs a simple and reliable mechanism for securing wicks in the burner along with a brass tube with many small teeth at its end. The tube is attached to the toothed rack that’s moved up and down by the adjuster knob.This type of lamp was used in most households and on rural properties before the introduction of electricity and is an early example of a promotional. The lamp was given away to customers of Kerosene oil as a means of increasing the Standard Oil Company sales of Kerosene during the late19th to early 20th century.Lamp of metal without shade. Mantle burner, plated light metal base. Ornate shade holder. Broken glass.Marked "Rayo Junior"flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lamp, mantle lamp, metal lamp, lighting, oil lamp, bradley & hubbard

As of 2016 Tony Benson is the last Australian to win the 5000m at one of the major meets (now called Diamond League). That year Tony Benson was undefeated in Europe something no Australian has done since. He was also undefeated in the USA in early 1972 and probably would have medalled in Munich 1972 except for an incurring a hamstring injury 10 days before the race AND not being able to find the team medical doctors until some 16 hrs after the injury due to them being away from the village. Despite running with a torn hamstring Tony Benson broke Ron Clarke's Australian Olympic record for the 5000m but had no 'kick' and finished 7th in the heat. None of those who made the final had ever beaten Benson. Kip Keino and Tony Benson became friends. Keino received the first ever Olympic Laureate Award by the IOC at the Rio opening ceremony in 2016. Five images from the Collection of Tony Benson. .1) Tony Benson runs during the Ballarat Teachers' College Lap of the Lake, 1962 .2) Ballarat Teachers' College Athletics, 1963 .3) Ballarat Teachers' College Athletics, 1963. Lecturer and coach Peter Fryar hand out the oranges. .4) Ballarat Teachers' College Tennis Team, 1963 .5) Tony Benson defeating the great Kip Keino at the 1971 Stockholm Grand Prixtony benson, olympics, olympic games, running, ballarat teachers' college, peter fryar, olympian, football, tennis, athletics

The Stanley Works was founded by Frederick Trent Stanley in 1843, originally a bolt and door hardware manufacturing company located in New Britain, Connecticut, USA. The Stanley Rule and Level Company was founded in 1857 by Henry Stanley in New Britain, Connecticut. In 1920, this company was independent from Trent Stanley's works but they merged with the separate but related Stanley Works, that was founded by Henry Stanley's cousin Frederick Trent Stanley, and continued operating as its hand tools division. At this time after the merger the “Sweetheart” Trademark was adopted for tools made between 1922 to 1935 with augers manufactured during this time having the “AA” trademark and this is when the Stanley company we know today came into being. Around 1937, Stanley acquired the British J. A. Chapman company, a British manufacturer of carpentry tools and other items (including bayonets during World War I) formerly located in Sheffield, from Norman Neill. This helped Stanley to enter the British market.A early tool manufactured by an emerging company that today produces tools for sale in just about every country in the world. The subject items trademark shows the item was produced between 1922-1935 at a time when the company had just merged and was transitioning into Stanley Tools Ltd.Nose bit auger. Similar to shell bit except the nose turned inwards to form a cutting lip. Stamped on shank "AA" trade mark (Stanley Tools)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Robert WYNNE (1959- ) Born Yarram, Victoria Robert Wynne studied a Diploma of Visual Arts at the Gippsland Institute of Advanced Education (now Federation University) from 1977 to 1979, and a Graduate Diploma of Visual Arts in 1981 majoring in Ceramics. During his final year he met visiting glass artist, Nick Mount, who had recently established a studio within Monash University. Robert was captivated by glass blowing and worked with Mount in those heady, pioneering days and carries with him many of the lessons he learned from Nick. Rob Wynne completed a Masters Degree in Glass at the California State University and visited private glass studios in the USA. In 1991 he established his own studio, Denizen Glass Design at Manly, New South Wales, where he produces a range of hand-blown glass including smaller production work and large, one-off sculptural pieces. Hand thrown and paddled form vessel featuring salt glaze.john edye, ceramics, jan feder memorial ceramics collection, gippsland, alumni

The history of Hoover dates back to the early 1900s and directly to Mr. James M. Spangler, an American janitor who invented the first vacuum cleaner to assist in dealing with his asthma. Originally founded in Ohio in 1908, Hoover Limited became a registered company in the United Kingdom in 1919. The first factory, in Perivale, Middlesex, England, opened in 1932. Hoover became the undisputed leader in the floor-cleaning market, so much so that in USA vacuuming became referred to as “hoovering”. This model was widely advertised in Australia from 1952 to 1958. Advertisements referred to it as “The Wonderful Hoover Floor Polisher”. It came complete with Scrubbers, Felt Pads, Lambswool Pads and Built - in Head Light and in 1952 sold for £32/8/-, or could be purchased with a deposit of £8 and weekly payments of 15/-. They claimed that the Hoover Polisher would take the drudgery out a woman’s work and appealed to men by saying the lambswool pads could be used to perfectly polish the headlights and duco of cars.This item is represented of domestic appliances used throughout Australia in the 1950s and 1960sAn upright Hoover electric polisher made from die-cast aluminium with Bakelite outer casing and electrical components.On plate attached to back: THE HOOVER ELECTRIC POLISHER MODEL 0212A./TRADE MARK D.C. OR A.C. 0-60) CYCLES VOLTS / 300 WATTS RATING SERIAL NOPF 533695 PROTECTED BY PATENTS, REGISTERED DESIGNS AND TRADE MARKS IN GREAT BRITAIN AND THE PRINCIPAL COUNTRIES OF THE WORLD MADE BY HOOVER LTD. GREAT BRITAINhoover appliances, domestic appliances

Yields information about the appearance of the intersection of Sturt and Grenville St looking west and tram operations.Photographic reproduction - sepia coloured of a three stereo pair images with details on the sides. Originals made by Underwood and Underwood of Arlington New Jersey and Westwood New Jersey USA. Not dated, c1908 Printed on A4 size ink-jet printer. Set of three: 1 - Collins St at Swanston St looking west - tram has the destination of Victoria Bridge - image number (10)-10238 2 - Princes Bridge, looking south with many people on the bridge, including market stalls, horse drawn vehicles and cable trams. Has the Wirths Circus building and ?? Stationers and Printers building in the background. 3 - Sturt St from Grenville St with 3 ESCo trams in the photograph along with the Town Hall, the tramway shelter. The Mechanics Institute Building has the "Talk W to W Coltman" sign on it. Image no. - (34)-10262.trams, tramways, melbourne, cable trams, collins st, swanston st, princes bridge, sturt st, esco, shelters

Book, 80 pages, gloss art paper, in black ink with a yellow card cover in green ink, centre stapled, titled "The Bendigo Tramways" Details history of Bendigo tramways, its tramcars and the involvement of the various operators. Has maps and photographs. Written by Keith Kings and published by the Victorian Division of the Australian Railway Historical Society and others at the time of the closure of the Bendigo system. Has details of the various organisations that published the book on the rear cover. Cover, index page, maps and rollingstock lists have been scanned see jpg images i1 to i7 For book itself see pdf images i1 to i4 326.1 - ditto - purchased by W.A. Doubleday for BTM ex Scottsbluff, NE, USA 8/2003. Added 27/09/03. See Reg Item 4242 for other copies of this book which has pencil annotations.trams, tramways, bendigo, battery trams, steam trams, history

George Reed was a draftsman who lived in Bentleigh , City of Moorabbin in mid 20th C and used this pencil for his work. Eversharp is an American brand of writing implements founded by Charles Rood Keeran in 1913 and marketed by Keeran & Co., based in Chicago. Keeran commercialised Eversharp mechanical pencils (manufactured by two companies, Heath and Wahl) then expanding to fountain pens when the company was acquired by the Wahl Adding Machine Co. in 1916 and it was named "Wahl-Eversharp". In 1941 the company renamed itself, this time as Eversharp. The company continued until 1957 when it was acquired by Parker Pen, which continued to use the Eversharp brand for a time. In 1993 Parker was purchased by the Gillette Company, which already owned the 'Paper Mate' brand - the best-selling disposable ballpoint pen. In 2000 Gillette sold its writing instruments division to the company Newell Rubbermaid, USA, and In 2011 the Parker factory at Newhaven, East Sussex, England, was closed, and its production transferred to Nantes, France.An 'Eversharp' propelling pencil manufactured prior to to the development of the ball point penA gold plated propelling pencil c1941engraved : G. . Reed Made in Eversharpwriting implements, pencils, pens , propelling pencil, fountain pen, biro, ballpoint pen, keeran & company chicago, parker pen pty ltd, gillette pty ltd, eversharp, paper mate, bic pty ltd,

Kodak was founded by George Eastman and Henry A. Strong on September 4, 1888 in New York USA. During most of the 20th century, Kodak held a dominant position in photographic film. Kodak began to struggle financially in the late 1990s, as a result of the decline in sales of photographic film and its slowness in transitioning to digital photography, despite developing the first self-contained digital camera. The first model of the Kodak camera appeared in 1888. It took round pictures 6.4 cm (2.5 in) in diameter, was of the fixed focus type, and carried a roll of film enough for 100 exposures. Its invention practically marked the advent of amateur photography, as before that time both apparatus and processes were too burdensome to classify photography as recreation. The first films had to be loaded into the camera and unloaded in the dark room, but the film cartridge system with its protecting strip of opaque paper made it possible to load and unload the camera in ordinary light. The Brownie camera was introduced in 1900, creating a new mass market for photography. This Kodak Brownie Box Camera is typical of the cameras used by amateur photographers c 1940A metal Kodak Brownie Box camera with a leather case, and an empty folder for negatives and prints Front ; KODAK / 'KODET' LENS / Brownie Flash 11 / CAMERA / MADE IN ENGLAND BY KODAK LTD LONDON Folder The Pleasures of PHOTOGRAPHY / Make Photography Your Hobby kodak ltd, eastman george, strong henry, photography. brownie box camera, digital photography,

Booklet contains photographs of: THH the Duke and Duchess of Cornwall and York; Earl of Hopetoun, Governor General, and Countess; Commonwealth Ministry; The Royal Party at Government House Melbourne; TRH the Duke and Duchess Landing at St Kilda Pier; The Mayor of Melbourne Welcoming His Royal Highness at the entrance to the City; Procession Passing down Bourke Street; Presentation of War Medals to Victorian Soldiers; The Duke of York and his Staff; St Kilda and Prahran Arch; City Arch; Procession passing Princes Bridge; Opening Ceremony at First Federal Parliament; Citizens' Arch; Queen Victoria Arch; Royal Yacht Ophir; Warships Gromoboi (Russian) and Brooklyn (USA); German Arch; Chinese Arch; State School Fete at Exhibition Building; The University Commencement; Group of Fijian Constabulary; Laying Foundation Stone, Soldiers' Memorial Ballarat; Visit to South Star Gold Mine, Ballarat; Illuminations at Princes Bridge and Flinders Street Station; Illuminations at Parliament House and Treasury; Illuminations at Town Hall and City ArchGold coloured paper cover embossed and tied with gold thread. Contains 16 pages of cream coloured paper printed in black, some with blue decorative margins.Handwritten inscription on title page: 'For the Boy from Grandfather in memory of a very happy time we spent together May 1901'duke and duchess of cornwall and york, royal visits, 1901, opening of parliament, federation arch, st kilda and prahran arch, city arch, german arch, chinese arch

Met lines - Vol. 3, No. 1 April 1987, staff newspaper of the Metropolitan Transit Authority - 20 pages, A4 size when centre stapled, printed on gloss paper. Has tramway related items on: 1. Tramway Bowls Association 2. Melbourne and Metropolitan Transit band (see image i2) 3. Painted trams - a paying concern - Transporting Art featuring trams 731, 816 and 721 along with a photo of David Larwill working on 722, and painted trams co-ordinator , Wendy Miller. Story includes notes on the sale to Jim Johnson at an auction late 1986, notes on the project itself, and on page 13 - notes on interviews with Michael Leunig, Lesley Dumbrell and David Larwill. 4. "20 million Americans see Melbourne and its trams" - a story about the NBC USA, breakfast broadcast on 4/2/1987 when tram ?? - could not find an entry in the Vicsig listing of decorated trams.trams, tramways, transporting art, decorated trams, the met, mta, sports, bowls, tramways band, tram 731, tram 816, tram 721, tram 722

Malachite is a copper carbonate hydroxide mineral. It has a chemical composition of Cu2(CO3)(OH)2. It often forms within limestone where a subsurface chemical environment favourable for the formation of carbonate minerals can occur. It is a substance that can be found in many different parts of the world including: Australia, USA, Russia and the Democratic Republic of Congo. Malachite has historically been used to produce copper, with mining of the mineral dating back over a period of four thousand years. Due to its beautiful green colourations, it is also commonly used for aesthetic purposes such as in the production of sculptures and jewellery. This particular specimen was collected from the town of Burra, South Australia as part of a geological survey undertaken during the nineteenth century. The locality (located on Ngadjuri Country) has a long history of mining, particularly in copper mining, as the area is rich in copper deposits. The first significant discovery of this was made in Burra (Burra Burra Mine) in 1845 and, at the time, the mine was the largest and richest of its kind in the world, producing nearly five percent of the total world copper output. This specimen is significant as it is considered to be a rare gemstone, as many of the original deposits for the stones are significantly depleted, leaving behind very few sources. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A solid palm-sized copper carbonate hydroxide mineral with patterns of green colourations Existing Label: MALACHITE / Locality: Burra / S. Aust. Other Label: Confirmed / as Malachite / C. Willman / 15/4/1 / + Bill Birch burke museum, beechworth, geological, geological specimen, malachite, gemstone, green gemstone, burra, burra burra mine, burra south australia, carbonate mineral, copper, copper mining, copper mining burra, carbonate hydroxide mineral, copper carbonate, malachite mining, malachite burra, monster mine

It is made up of andalusite. Andalusite is a rock-forming mineral, sometimes found in granite or schist. It is often used to make glass, ceramic products, chemicals, and heat-resistant bricks as it can withstand high temperatures without changing. The chiastolite contains particles of graphite, which arranges in geometric patterns. When crystal growth occurs in the rock, the granite particles concentrate at crystal interfaces and can result in cross shapes. These ‘cross stones’ have been valued and used for their spiritual or religious meaning and used as charms, gems, or amulets. Chiastolite was first discovered in 1754, seen in a description in a published book by a palaeontologist, Franciscan priest, and Spanish author, Jose Torrubia. Deposits have been found in Australia, France, the USA, Chile, Canada, Spain, Brazil, Sri Lanka, and Russia. Deposits have been found in Western Australia and South Australia. This particular specimen was found in Bimbowrie, South Australia. Other chiastolite specimens have been found in Bimbowrie, along with jasper, quartz, and aventurine in the form of rolled pebbles or schist. This chiastolite specimen is socially and historically significant. It is a very rare sort of andalusite mineral. It is from one of only two locations where it is regularly found in Australia. The carbon cross has made it an important religious symbol in the past. Its ability to withstand high temperatures has made it a common ingredient in heat-resistant bricks and ceramics today. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A metamorphic mineral consisting of andalusite, with a cross shaped graphite pattern in colours of grey, brown and yellowburke museum, beechworth, geological, geological specimen, andalusite, chiastolite, geometric, cross stone, spiritual, religious, australia, south australia, bimbowrie, quartz, jasper, aventurine, schist

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

At the Imperial War Conference in 1917, and again at the conference of overseas Prime Ministers in 1918, King George V had foreshadowed a visit to the Dominions by his eldest son, “when peace comes”. At the end of the War, the King kept his pledge and, following on from successful visits to other countries, including the USA and West Indies in 1919, Edward Albert Christian George Andrew Patrick David, the Prince of Wales, embarked on a journey to Australia. The visit was in part to offer official thanks for the support Australia had shown Great Britain during World War I. It was also designed to strengthen the links between Australia and the Empire. The Prince of Wales arrived in Australia on board the HMS Renown in April 1920, having left England the previous month. He spent nine days in Victoria, eleven days in New South Wales, four days in Tasmania, eleven days in Western Australia, six days in South Australia and eight days in Queensland. In all, he visited 110 cities and towns across Australia.Metal badge with photo of Prince of Walesprince of wales, royal visit 1920, badge

Steve Lee grew up in Falls Creek and had skis on his feet when he was just two years old. He later became a member of the Falls Creek Race Club and at the age of 14 won State and National Junior titles. After repeated success, Steve was selected to race overseas in the Australian Junior team. He won the Australian Open Championship at the age of 17. For 10 years, Steve never missed a race in the World Cup Circuit. Overall, he claimed 20 top 15 finishes in Downhill, Super-G and combined events. Towards the end of his career Lee swapped the World Cup circuit for the World Pro Tour in the USA, winning the Pro Downhill Tour ‘King of the Mountain’ title. He was also running a photography business in Falls Creek and was also involved in sports commentating on Australian television. This included commentating Alpine Freestyle events at four Winter Olympics and several World Championships. One of these events was the Winter Olympics at Salt Lake City in 2002 for which this certificate was awarded.A certificate featuring the Olympic Rings and text on a dark blue background.SALT LAKE 2002 OLYMPIC WINTER GAMES JEUX OLYMPIQUES D'HIVER Steven Lee Thank you for your participation in and contributions to the success of the Salt Lake 2002 Olympic Winter Games 8 to 24 February 2002 Salt Lake City, Utahsteve lee, australian olympians, sport commentator

1963 – A general in the Army of the Republic of Vietnam, Nguyễn Văn Thiệu participates in the overthrow of President Ngô Đình Diệm 's government. Coup leader General Dương Văn Minh briefly becomes chief of a military junta in South Vietnam. 1964 – Lieutenant General Nguyễn Khánh overthrows Minh to become prime minister. 1965 – Vice Air Marshall Nguyễn Cao Kỳ overthrows Khánh to become prime minister. General Nguyễn Văn Thiệu is his chief of state. 1967 – Nguyễn Văn Thiệu runs successfully to be the second president of South Vietnam. Nguyễn Cao Kỳ is his running mate. 1971 – President Nguyễn Văn Thiệu re-elected. 1973 – The Paris Peace Accords, negotiated without Thiệu’s participation, fails to stop the fighting in South Vietnam. Even so, US and allied troops withdraw. 1975 – On 24 April, with North Vietnamese victory imminent, Thiệu’ resigns as president and the CIA fly him to Taiwan. He then spends most of his exile in London, moving to Massachusetts, USA, in the 1990s. Timber framed image of Nguyen Van Thieu, Second President of Vietnamrepublic of vietnam, president of south vietnam, nguyen van thieu, thieu

The only IUD of Australian origin, developed in 1971 by Australian doctor Ian Anderson in partnership with Ansell Australia and produced at the Ansell factory, 18 River Street, Richmond in the 1970s. The device was taken up by the Battelle Foundation, USA, and clinical trials were carried out in Israel, Indonesia and Singapore. No formal clinical trials were carried out in Australia. The device was used extensively by Population Services International, a private abortion clinic in Sydney in the mid 1970s. At the time this device was donated to the collection in 1997, there were legal proceedings regarding two Australian women who claimed ongoing problems as a result of its use. The donor, Dr Richard Gutch, practised in Clifton Hill and used some in the 1970s but not for long. The drawbacks were the multi-filament string acted as a wick for infection, also the latex leaf often came away from the thread when pulled for removal. Curettage was often the only effective way to remove the IUD. Dr Gutch removed many as he developed a reputation for being skilled at their removal.Intrauterine device (IUD), Ansell-Anderson latex leaf design, with paper sleeve. Made of latex impregnated with copper and zinc. The IUD is leaf-shaped with serrated edge and diamond shape cut out from its centre. Small hole in tail with attached twisted cream coloured thread. Paper sleeve is stamped, "THE/ ANDERSON-ANSELL/LATEX LEAF/I.U.D". SIZE:A/PATENTS PENDING", and notes it is Size A.contraceptive, intrauterine device

Tobacco tin, badly rusted of J.G. Dill's Best Cut Plug. J.G. was once a great Virginian tobacco company, known worldwide for its Dill's Best Pipe tobacco.Lady with arms above head. DILL'S / BEST. J.G. DILL'S / BEST / CUT PLUG / RICHMOND VA USA / On sticker - red writing: 1.8.oz Net Factory Weight when packed Sides of tin: (1 & 2) DILL'S BEST CUT PLUG x 2. (3) THE BEST CUT PLUG. Celebrated for its smoking quality. (4) Notice - The manufacturer of this tobacco has complied with all requirements of law. Every person is cautioned under penalties of law not to use this package for tobacco again. smoking, j.g. dills, pipe tobacco

The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. The first race at Falls Creek was held in 1979 under the name of “Australian Birkebeiner”. It was a 21km race with about 80 participants organised by the Birkebeiner Nordic Ski Club of Mount Beauty. The course started and finished at Falls Creek Alpine Resort and took participants out into the Bogong High Plains. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2021 plans were in place for the 30th anniversary of the Hoppet when it was again stopped due to COVID-19. A virtual Hoppet was put in place. It ran between 1st and 29th August 2021 and was again successful, with almost 1200 entrants. 31 countries and all Australian states and mainland territories were represented. Participants came from Argentina, Austria, Canada, Czechia, Dubai, Estonia, Finland, France, Germany, Iceland, India, Ireland, Israel, Italy, Japan, Malaysia, Netherlands, New Zealand, Norway, Russia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, UK and the USA.This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster featuring two skiers heading into the distance. One skier has a race bib with 30 1991 - 2021 visible on his back. At the top is a circular emblem featuring a kangaroo looking through the middle of the number 30. It is surrounded by the words "KANGAROO HOPPET ANNIVERSARY 1991 - 2021". Logos of Worldloppet, AGL, Falls Creek, Alpine Shire Council, Victorian State Government, the Birkebeiner Nordic Ski Club, FIS, Community Bank Mount Beauty & District and KANGAROO HOPPET are across the bottom of the poster. In middle of image: AUSTRALIA'S PREMIER X-COUNTRY SKI RACE Between image and logos: 18 AUGUST 2021 FALLS CREEK AUSTRALIA 7 KM 21 KM 42 KM HOPPET.COM.AUkangaroo hoppet, worldloppet events, falls creek, mt. beauty

Made by Cpl. Charlie Dawes 116777 R.A.A.F from parts got while serving at Goodenough and Thursday Isalnds WW2Miniature model of a WW2 era Lockheed P-38 Lightning twin engine aircraft mounted on a trench art ashtray made from various used munitions. This model was made during WW2 by Corporal Cyril 'Charlie' Dawes, RAAF service number 116777, from parts found whilst serving at Goodenough and Thursday Islands in the Torres Strait. The aircraft is supported by a 0.50 inch calibre bullet fixed to the inside of a section of an artillery case which forms the base. The base has three 0.303 inch calibre bullets attached vertically around the circumference and a metal matchbox holder with a RAAF hat badge insignia attached to the front. The items have been made from chromed metal materials. The RAAF was equipped with a small number of these aircraft, commencing in 1942, which were used for front line photographic reconnaissance duty. The first version of the Lockheed P-38 was introduced in 1941 by the USA Lockheed aircraft company as a heavy fighter.RAAF chrome cap badge (WW2 era with the kings crown)plane, trench art, ashtray