This ice cream maker was made by the 'Toytown Freezer Company' of Winchendon, Mass. U.S.A and was also known as ‘Everybody’s Self Freezer.’ To make the ice cream, the container was turned upside down, and the metal plate was opened, revealing a separated section. Ice was placed inside, along with some salt to prevent it from melting too quickly. The bottom plate was replaced, and the container turned upright. The top lid was removed and cream and flavouring were then placed inside and the maker was resealed. The handle – also known as a grain dasher – was turned to mix the ingredients, and the ice cream was nearly ready. Manually operated ice cream freezer. Plain wooden pail with metal lid. 'Pat Oct 28 1924 - 30T'churchill island, ice cream maker

This vase was gifted to the Faculty by Dr Walter Wyndham Biggs upon his retirement from the Faculty Board in 1981. Dr Biggs was the first flying anaesthetist of the Flying Surgeon Service based at Longreach in central Queensland. The vase is hand painted by Dr Biggs mother, Bessie Biggs. The manufacturer of the vase, Furstenberg, is one of oldest and most renowned porcelain makers in Europe since 1747. Made in West Germany, the makers mark is found at the base of the vase marked with a blue under glaze symbol of a crown, script F and a number 9. Porcelain vase of bulbous form and narrow neck with gold trim on lip. Black and white hand painted scene of flying geese above a body of water surrounded by reeds.[hand written on base in black ink] Handpainted / by / Bessie Biggs / 1981 [embossed on base] 7405/30 [Blue under-glaze on base] symbol of crown / cursive script F / 9 / FURSTENBERG / SEIT 1747 / WEST GERMANY [Artist signature on painted surface] B BIGGSdr walter biggs, furstenberg, porcelain

R Timmins & Sons were makers of heavy steel 'toys' - toy in this context means any small metal object, including hand tools. The company was founded in 1790 by Richard Timmins and was situated in Hurst St, and later in Pershore Street, Birmingham. In 1850 Richard Timmins died aged 60 and the company continued with his wife Ann and their son Henry who were the executors of his will. In 1889 they were taken over by another Birmingham maker, W & C Wynn of Suffolk Street also edge tool makers and the business moved to Commercial Street Birmingham in 1872. For a few years, both companies continued to operate under their original names. In 1892 they were incorporated as Wynn, Timmins & Co, and in 1897 the premises in Commercial St were renamed Century Works. The company survived until 1969 when they were taken over by Balfour Dawins Ltd of Sheffield, and the works in Birmingham then closed.A significant item given its age having the probability of having been made after Richard Timmins had died and before the take over in 1872 during the time the company was being run by his wife Ann and son Henry. Given the inscription on the item is "A Timmins & Sons". The items significance is social given it was used to clean bungholes in barrels and was possibly used in the early cooperage industries of the early Australian colony. Bung reamer metal with wooden handle. A Timmins & Sons stamped on blade.warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, bung hole reamer, barrels, barrel making

A Jack plane is used for smoothing timber that is used in the manufacture of furniture or other wooden objects. Traditionally, smoothing planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to smooth or even out timber. The blade or iron was likewise secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Company History: The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow regarded as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperage's and other industries, both locally and far and wide. The year 1792 was deemed by the firm to be that of its foundation it was in all likelihood the year in which John Manners had set up his plane-making workshop on Saracen Lane off the Gallowgate in the heart of Glasgow, not far from the Saracen's Head Inn, where Dr Johnson and James Boswell had stayed on their tour of Scotland in 1773. Alexander Mathieson (1797–1851) is recorded in 1822 as a plane-maker at 25 Gallowgate, but in the following year at 14 Saracen's Lane, presumably having taken over the premises of John Manners. The 1841 national census described Alexander Mathieson as a master plane-maker at 38 Saracen Lane with his son Thomas Adam working as a journeyman plane-maker. In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company acquired the Edinburgh edge-tool makers Charles & Hugh McPherson and took over their premises in Gilmore Street. The Edinburgh directory of 1856/7 the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street. The 1851 census records indicate that Alexander was working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 (Post-Office Glasgow Annual Directory) the firm is now listed as Alexander Mathieson & Son. By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, also off the Gallowgate, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses log the firm's growth and in 1861 Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm. A vintage tool made by a well-known firm made for other firms and individuals that worked in wood. The tool was used for the smoothing of a piece of timber that was then used in some form of cabinet manufacture or wood working. A significant item from the mid to late 19th century that today is sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made. Jack Plane; a wooden smoothing plane, made by Alex Mathieson & Son, Glasgow. Plane has inscriptions."Alex Mathieson & Son Glasgow" Stamped "GN" inside with a "W" on endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jack plane, smoothing plane, woodworking tool, woodwork, cabinet making

The subject router is commonly referred to disparagingly as the ‘old woman’s tooth’ or ‘hag’s tooth.’ It is a router that houses a plough plane iron instead of a purpose made shoe-type cutting iron. They work fine but rarely give the type of clean surface required for veneer inlays. These types of tools are adjusted by the same hammer-tap tapping method used generally on wooden-bodied planes on the iron or plane body. These tools are effective and practical when used in general carpentry and joinery. Company History: The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow regarded as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperage's and other industries, both locally and far and wide. The year 1792 was deemed by the firm to be that of its foundation it was in all likelihood the year in which John Manners had set up his plane-making workshop on Saracen Lane off the Gallowgate in the heart of Glasgow, not far from the Saracen's Head Inn, where Dr Johnson and James Boswell had stayed on their tour of Scotland in 1773. Alexander Mathieson (1797–1851) is recorded in 1822 as a plane-maker at 25 Gallowgate, but in the following year at 14 Saracen's Lane, presumably having taken over the premises of John Manners. The 1841 national census described Alexander Mathieson as a master plane-maker at 38 Saracen Lane with his son Thomas Adam working as a journeyman plane-maker. In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company acquired the Edinburgh edge-tool makers Charles & Hugh McPherson and took over their premises in Gilmore Street. The Edinburgh directory of 1856/7 the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street. The 1851 census records indicate that Alexander was working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 (Post-Office Glasgow Annual Directory) the firm is now listed as Alexander Mathieson & Son. By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, also off the Gallowgate, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses log the firm's growth and in 1861 Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm. A vintage tool made by a well-known firm made for other firms and individuals that worked in wood. The tool was used for making timber veneers or smoothing a trench in a piece of timber that was then used in some form of cabinet manufacture or wood working enterprise. A significant item from the mid to late 19th century that today is sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made and required considerable skill in their use. Old Woman's Tooth Router Mathieson. Single iron cut down from a larger plane iron. Has Marked A Mathieson & Son also stamped inscription on side G Hill. (owner)flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, plane, old woman's tooth, router, hag's tooth router, cabinet making, woodworking tools, a mathieson & sons, cabinet tool makers

This knife is an example of trench art and has been made during a conflict, probably during World War Two. The maker and the circumstances are unknown. It would have been used either as a cheese or a fish knifeThis item has no known provenance but is retained as an example of trench artThis is a silver-coloured metal knife with a flat curved blade with a point at the end. The handle is the casing of a bullet inserted into the bladewarrnambool history, trench art

The medal was designed by Andor Meszaros and made by K. G. Luke(Medal Makers) of Melbourne, Victoria. This medal was presented to the Shire of Ballarat in 1951 and is now house in the Old Ballarat SHire Building at Learmonth, Victoria.This medal represents the 100 years of "Government in Victoria", also the "Discovery of Gold".A large round bronze medal with a horse bounding left, broken shackles on foreleg, carrying woman holding sword (Justice) and man holding torch (Equality).The front features a man holding a torch and a woman on a horse holding a sword. The horse has a shackle on its front left leg, surrounded by the words "EQUALITY AND JUSTICE THROUGH FREEDOM". On the back at the bottom is flowers and leaves with the words "CENTENARY OF THE GOVERNMENT OF VICTORIA 1851 - 1951.shire ballarat government victoria gold discovery 100 years

Engine (power producing equipment) A single cylinder Blackham stationary engine. This engine required steam from a separate boiler to operate. Maker : W.H Blackham King Street, Melbourne, Victoria c. 1900 Historic - Industrial - Single cylinder Stationary engine - W. H. Blackham - Kings St. Melbourne, Victoria, Australia A single cylinder Blackham stationary engine. - Made from Iron, wrought Iron & brassW.H Blackham King st. Melbournepuffing billy, blackham, single cylinder stationary engine

Wimmera Street looking North from Florence Street across Main Street. 1947 Dalgety's. Two story Commercial Bank. N.W. Ledgars Boot maker. Post Office and Post Office Hotel.stawell businesses

In about 1888 William George Ashman (1871-11/2/1944) began a tailoring business in High Street, Eaglehawk. In 1890 he admitted his brother Arthur Thomas Ashman to the business and they traded as Ashman Brothers. In 1936 the company of Ashman and sons was registered at 265 Hargreaves Street. They specialised in made to measure, hand tailored suits. William married Clara Hunkin (1871-25/11/1944) in 1894. Their sons, John, Eric, Basil and Charles followed into the family business.Woolen fabric trousers, part of Dress Suit. A decorative strip runs down each leg. The waistband can be adjusted on either side by belt/buckle attachments. Trousers fasten with two buttons and there are four buttons at the fly opening at front. There are two deep lined pockets either side and one top pocket at rear on LHS. There is a maker's label stitched to the lining of the Rear pocket which reads "Ashmans, Hargreaves Street, Bendigo 'The Home of Better Suits'". A name written in ink below the maker's label is 'Mr M. Suurpaa, 28-3-1961 7252." Leather strips have been sewn inside edge of each leg cuff for garment protection.men's clothing, formal wear, trousers

This bottle was known as a torpedo bottle. As the bottle had to lie on its side the soda was kept in contact with the cork and stopped the cork from shrinking and causing loss of pressure. This bottle comes from the Warrnambool aerated waters factory of John Searle Rowley (1837-1893). John Rowley, born in England, came to Australia in 1856 and in 1865 he opened a branch of the Geelong Corio Brewery at the corner of Timor and Banyan Streets in Warrnambool, bottling the beer, not brewing it. In 1870 this business was closed and Rowley developed his soft drinks business which he had established in 1868. In 1872 the business was called the Warrnambool Steam Aerated Works when a steam engine was purchased from Melbourne. In 1872 the factory was turning out 600 dozen bottles a day. By the 1880s the factory was occupying half an acre of land, was employing 13 people and manufacturing 20 varieties of drinks. Rowley died in 1893. He had been active in community affairs, serving four years on the Warrnambool Council and on the committees of the Warrnambool Hospital and the Mechanics Institute. This bottle is of great interest as it comes from the factory of the prominent 19th century Warrnambool aerated waters manufacturer, John Rowley. Few of his bottles have survived today. Cordial and soft drinks manufacturing was an important industry in Warrnambool for over 100 years and John Rowley was a key figure in this industry.This is a glass bottle, tinted green. The body of the bottle has an oval shape tapering to a point at the end and is known as a torpedo bottle. It can only be stored lying on its side. The neck of the bottle ends with a moulded glass top. There is no stopper. The bottle is slightly discoloured inside. The information on the maker is embossed into the body of the bottle.‘J.S. Rowley’s Aerated Waters Timor Street Warrnambool’john searle rowley, cordial manufacturers in warrnambool, history of warrnambool

This cup and saucer set was issued as a souvenir of the opening of the Federal Parliament in Canberra in 1927. The building was opened by Prince Albert, the Duke of York who was accompanied by Elizabeth, the Duchess of York. The Duke of York later became King George VI of England. The colonies in Australia became Federated States in 1901 and from that date to 1927 the Australian Federal Parliament sat in Melbourne. When Canberra became the capital of Australia a Parliament House building was erected at a cost of £600,000 but it is now known as Old Parliament House as the present Parliament House was opened in 1988. This cup and saucer set is of interest as a memento of an important event in Australia’s history – the creation of a capital city and the opening of the first Federal Parliament House. It will be useful for display. This is a white china cup and saucer set. Both the cup and saucer have two gold bands around the rims and are decorated with black ornamentation and the portraits of the Duke and Duchess of York contained within gold oval patterns. There is also black lettering on both objects. The name of the maker is printed on the bottoms of both objects. On both objects: ‘The Federal Parliament opened by H.R.H. The Duke of York at Canberra 1927’ ‘Foley China E.B. & Co. Made in England’ opening of federal parliament 1927, history of warrnambool

These Christ Church Warrnambool badges were made about the mid 20th century and were either given to church members assisting with the fair held in the church buildings and grounds in the latter part of the year or were sold to community members to raise funds for the church. The Anglican community in Warrnambool first met in a building in Liebig Street in the early 1850s and in 1856 Christ Church in Henna Street was opened with additions in the 1860s and the tower being erected in 1882. Today Christ Church in Warrnambool still holds an annual fair in late spring.These badges are of interest as souvenirs of the fairs held at Christ Church, Warrnambool about the middle of the 20th century..1 A metal badge with blue edging, an image in blue of Christ Church and yellow printing. Around the edge of the badge is information about the badge’s maker. The back of the badge has a metal clip. .2 as above .3 as above except that the colouring is reversed – the edging and image of Christ Church are red and the printing is blue. Centenary Fair Oct.3 – Nov. 1 J.W.Patrick 440 Rae St N. Fitzroy Melb. Vic christ church, warrnmbool, history of warrnambool

Sloan's liniment was used in the late19th and early to mid 20th century. Originally used for horses but later advertised as good for Man and Beast.While the bottle of Sloan's liniment has historical value, the link with Warrnambool lies in the chemist's label of J Paterson who operated a business at 186 Timor Street, Warrnambool around the 1930s.Brown glass bottle with black metal screw-top lid. Bottle has a short neck. The indented rear has the maker's name imprinted. The black and white printed paper label has a picture of a man's head and wraps across the front and sides and has a red sticker with the Warrnambool retailer's name..Front: SLOAN'S/FAMILY/LINIMENT/(text obscured)/NEW YORK (obscured) ST LOUIS/NETT CONTENTS 2½ FL. OZS Left side: INSTRUCTIONS-Massage (obscured) gently with/fingers. Then (obscured) liberally with a soft/ flannel cloth or a piece of absorbent cotton. If skin is tender,/do not use./ CAUTION:-COMBUSTIBLE MIXTURE./Do not Use near Fire or Flame./Regd Vic 1173 Right side: EXTERNALLY: Recommended by us in the treatment of Muscu-/lar Congestion and Muscular Pain due to the exposure and fatigue or/of rheumatic origin, Lumbago, S--- and sc--- and s--- of/Muscles and Tendons, Neuralgia, (obscured), Stiff Neck, Backache, Bruises, Chilblains, Mosquito Bites and/stings of major non-poisonous insects. An Excellent Counter (obscured) Back: THIS BOTTLE ALWAYS REMAINS/ THE PROPERTY OF/CHAMBERLAIN'S PTY LTD/SYDNEY warrnambool, chemists, timor st, sloan's liniment, paterson j

Esma Turner Collection - (Esma Turner - Secretary of the Huntly and District Historical Society) Amalgamated Society of Engineers / photo of emblem 10x15mm - see 4737.1- blue banner at base 'Be United and Industrious '/ wording below Amalgamated Society of Engineers Machinists .(Wheelwrights ?) .Smiths and Pattern Makers - An explanation of the emblem is given in 4737.1.photograph, esma turner collection - ( esma turner - secretary of the huntly and district' s historical society ) amalgamated society of engineers / of plaque -

This blazer belonged to Rob Hocking who was involved with the Congregational Youth Fellowship from 1951 - 1960.Men's royal blue felt blazer. The body of the blazer is unlined and the sleeves are lined with cream cotton. It has two plastic buttons and one inner pocket on the right side. The blazer pocket bears an embroidered Congregational Youth Fellowship symbol in red, white and gold. The blazer has the maker's label but no size."CONGREGATIONAL YOUTH FELLOWSHIP" "EXCLUSIVE TO ... BLAZER SHOP THE MYER STORE FOR MEN"congregational youth fellowship, hocking, rob

Dog tags were issued by the Shire of Bulla to all dog owners who resided within the Shire. The dog tags were used to identify dogs and to control wandering animals in the area.A gold metal dog tag with a small key ring issued by the Shire of Bulla in 1982. The lettering on the tag is engraved in the concave side of the tag. The tag is in a small brown envelope which has been fastened with staples at the end. The words Regd. Dog Victoria and the maker's name is engraved on the concave side of the tag.SHIRE OF / BULLA / 991 / 1982-83dog registration, shire of bulla, welcome products, george evans collection

Silver Plated butter dish with domed swivel lid and handle, heavily embossed with flora & fauna decorations, four splayed legs. Makers mark of a hand holding aloft a flag, Philip A & H Perry (or Philip Ashberry) & Sons Sheffield 288 D E.P.B.M ( electro plated brittania metal ) C1900A&H Perry & Sons Sheffielddomestic equipment, table setting, butter dish

Postcard photo of a W2, possibly 377, at the corner of Collins and Exhibition St Melbourne with the various buildings on the north side of the street and the many trees. Divided back with places for stamp, address, correspondence and details with makers details "Murray Views of Gympie Qld, No. 10, Collins St. Melbourne, from an Ektachrome photograph.trams, tramways, collins st, exhibition st, tram 377?

Edison Records was one of the early record labels that pioneered sound recording and reproduction, and was an important player in the early recording industry. The first phonograph cylinders were manufactured in 1888, followed by Edison's foundation of the Edison Phonograph Company in the same year. The recorded wax cylinders, later replaced by Blue Amberol cylinders, and vertical-cut Diamond Discs, were manufactured by Edison's National Phonograph Company from 1896 on, reorganized as Thomas A. Edison, Inc. in 1911. Until 1910 the recordings did not carry the names of the artists. The company began to lag behind its rivals in the 1920s, both technically and in the popularity of its artists, and halted production of recordings in 1929. Thomas A. Edison invented the phonograph, the first device for recording and playing back sound, in 1877. After patenting the invention and benefiting from the publicity and acclaim it received, Edison and his laboratory turned their attention to the commercial development of electric lighting, playing no further role in the development of the phonograph for nearly a decade. Start of the Recording Industry: In 1887, Edison turned his attention back to improving the phonograph and the phonograph cylinder. The following year, the Edison company introduced the ”Perfected Phonograph”. Edison introduced wax cylinders approximately 4+1⁄4 inches (11 cm) long and 2+1⁄4 inches (5.7 cm) in external diameter, which became the industry standard. They had a maximum playing time of about 3 minutes at 120 RPM, but around the turn of the century the standard speed was increased to (first 144) and then 160 RPM to improve clarity and volume, reducing the maximum to about 2 minutes and 15 seconds. Several experimental wax cylinder recordings of music and speech made in 1888 still exist. The wax entertainment cylinder made its commercial debut in 1889 at first, the only customers were entrepreneurs who installed nickel-in-the-slot phonographs in amusement arcades, saloons and other public places. At that time, a phonograph cost the equivalent of several months' wages for the average worker and was driven by an electric motor powered by hazardous, high-maintenance wet cell batteries. After more affordable spring-motor-driven phonographs designed for home use were introduced in 1895, the industry of producing recorded entertainment cylinders for sale to the general public began in earnest. Blank records were an important part of the business early on. Most phonographs had or could be fitted with attachments for the users to make their own recordings. One important early use, in line with the original term for a phonograph as a "talking machine", was in business for recording dictation. Attachments were added to facilitate starting, stopping, and skipping back the recording for dictation and playback by stenographers. The business phonograph eventually evolved into a separate device from the home entertainment phonograph. Edison's brand of business phonograph was called the Ediphone. The collection of three phonograph cylinders are an example of early recorded music use for domestic entertainment. They are significant as they represent the beginnings of the modern recording industry.Cardboard tube-shaped gramophone cylinder box with lid. The printed label on the outside of the box advertises the maker and patent details. The Catalogue Number and Title are either printed or hand written on the cylinder’s lid. This cylinder contained Record no. 49, “B & H Jack” and was made at the Edison Laboratory USA. C. 1905On lid “Edison Record No. 49”, written in pencil “B & H Jack” (it looks like this) On cylinder “EDISON GOLD MOULDED RECORDS ECHO ALL OVER THE WORLD” Patents listed for 1904 & 1905warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, gramophone record, gramophone cylinder, edison cylinder, edison record, home entertainment, music recording, edison laboratory orange nj, usa, national phonograph company of australia ltd sydney, thomas a. edison

People collect items that help them remember a special time in their lives or some thing that appeals to them. Brownie cameras were used in the 1950s. Negatives and photos represent the life of the Matthews family.George and Laura Matthews lived at 12 Roper St. Mt Beauty from 1957 to the 1970s. The items in this collection belonged to them and represent part of their lives when living in the Kiewa Valley.1. Brownie camera - black vinyl. 2. Tin Box "Ted the Jester' biscuit tin. 3. Gold button & Queen Elizabeth badge 4. Silver plunger 5. Dunkling Jewellers Guarantee re ring 6. State Savings Bank Book 1957 - 1963 7. Laura M. Matthews Union Card 1963 8. LaTrobe Health Service Card. 9. Meat Ration Cards 1948 10. 18 Negatives of people/holidays in envelope 11. Photos1. Made in England by Kodak Ltd 2. Use by 1998 and 'Eileen' printed in texta on top george matthews, laura matthews, 12 roper st., mt beauty, brownie camera

These items were used or were available for sale by chemists in Orbost. Chemists who worked in Orbost included Henry Cottman; James Alfred Dubois Williams; Harry Arthur Murray; Miss P.E .Mason (Phyllis Estelle?); Miss Sybil Monica Buzza; Thomas James Frayer; Australia Shaw; James David Torley; John William Zimmer; Dalkeith William Steele; William Thomas Hollingsworth; E.E. Cohen; R.S. Anderson; Frances John Perry Faith Everard Pardew and Charles Anthony Wurf. The tin was designed and used by the Colonial Sugar Refining Co. to store and sell golden syrup which is a by-product of cane sugar, molasses and treacle. The practices of early pharmacists are revealed through these items. The items have a clear association with Orbost.3210.15 is a rusty tin of CSR Golden Syrup. It is a yellow, red, brown, white tin with a black lid. used to sell and store golden syrup. The kilogram tin has the words 'golden syrup' printed in large red letters. There is a recipe for ANZAC BISCUITS on the back of the tin. Inside two concentric circles - "FROM THE AUSTRALIAN CANEFIELDS NATURALLY GOLDEN" around a drawing of a sugar refinery. 3210.16 is a glass jar with a black metal lid. It contains small beakers, rubber tubing, stoppers and vials. on front in red print - "FROM THE AUSTRALIAN CANEFIELDS NATURALLY GOLDEN ; CSR GOLDEN SYRUP ; GUARANTEED PREMIUM QUALITY ; NET 1KG ; SEE BACK FOR DELICIOUS RECIPE"pharmacies-orbost zimmer-john tin-golden-syrup medical-equipment

Sepia photograph on grey board. Five men (three wearing suits, two in shirts) with two motorised bicycles outside shop with verandah which has sun blind rolled up. Bicycle in background leaning against shop front. Inscriptions: in image - above verandah 'RC Hambleton, Motor & Cycle agent', 'DH---- General', 'Genuine BSA parts', 'Aulsebrooks, biscuits' On board BL corner 'Martin Murphy', BR corner 'Photographer, Morgans'. See Research field.Martin Murphy, Photographer Morgansbusiness, retail, r. c. hambleton, hambleton, richard cobden.

Refers to the service of " WO2 Tommy PATTISON". Refer Cat No 5342.2.1. & 2. These are shirts/jackets. They have two breast pockets held shut with 2 buttons each. They are long sleeved. The cuffs have 3 buttons for closing of wrist section. the shirt fronts are held shut with 5 buttons. They have an epaulette of same material on each shoulder.1. It has two makers labels. The white one has written: “1217 96E 0124 Order 299 006 86 107R”aust army, uniform, wo2 tommy pattison.

This badge was produced in 1935 either as a sale item or a presentation item in connection with the Jubilee Spring Fair at the Anglican Christ Church in Warrnambool. Christ Church in Henna Street was designed by Nathaniel Billing and opened in 1856 with the northern portion of the nave added in 1860. The square tower, designed by Andrew Kerr, was added in 1882. Christ Church today still holds an annual Spring flower festival.This badge is of interest as a memento of a function held at the Anglican Christ Church in Warrnambool over 80 years ago.This is a circular metal badge with a painted white background with a blue edging, a coloured British Flag and blue printing. The back has a metal clip.Jubilee Spring Fair Christ Church W’bool Nov.27-28 1935 A.W.Patrick Maker 440 Rae St. Fitzroy Melb.