Showing 2616 items
matching condition
-
Puffing Billy Railway
G42, Garratt Steam Locomotive, 1926
G42 Garratt Steam Locomotive Traffic and train loadings on Victoria's narrow gauge railways reached their peak during the 1920s. To assist in handling the longer, heavier trains, the Victorian Railways ordered two larger, more powerful Beyer Garratt locomotives. These were delivered in 1926 and were numbered G41 and G42. They were sent to work on the Colac–Beech Forest–Crowes line and the Moe–Walhalla line respectively. After the line from Moe closed in 1954, G42 was sent to Colac, where it worked with its mate, G41, until closure of that line in mid-1962. G41 had been in poor condition and was scrapped, whereas a brighter future awaited G42. The Victorian Railways offered G42 to the Puffing Billy Preservation Society, for display as a static exhibit in the Menzies Creek Museum. Over time, a plan evolved to restore G42 to operation, a goal that was eventually achieved by the launch of G42 back into traffic in April 2004. G42 now continues to operate as a restored member of the Puffing Billy Railway's locomotive fleet. No. originally constructed: 2 No. in service: 1 (No. 42) Boiler pressure: (lb/sq. in) 180 Boiler heating surface: 1268 sq ft (117.8 m2) Tractive effort: (85%) 26,860 lbs (12.18 t) Driving wheel diameter: 36" (91.44 cm) Max axle load: 9t 5cwt Length Overall: 51' 7" (15.72m) Height Overall: 10' 8" (3.28m) Date of manufacture: 1926 Manufacturer: Beyer Peacock Place of manufacture: Manchester UK Locomotive Type: Garratt Coal capacity: 70 cwt Cylinder diameter: 13" (33.02 cm) Cylinder stroke: 18" (45.72 cm) Wheel arrangement: 2-6-0+0-6-2 Roadworthy weight: 69t Water capacity: 1680 gal (7,637.43 l) Beyer Peacock - Garratt Locomotives Register Works Number - 6268 / 1926 Gauge/Railway/Class - 2'6"/Victorian Government Rlys/G Type - 2-6-0+0-6-2 No. G42 Notes - Australia G42 Built in 1926 and painted all-over black, this Garratt locomotive was issued to the Moe to Walhalla line where it remained—other than for overhauls—until the line closed in 1954. After an overhaul at Newport Workshops, it was issued to the Colac to Crowes line and remained there until that line closed in 1962 when it was returned to Newport Workshops for storage. In 1964 it was sold to the Puffing Billy Preservation Society and removed from the V.R. register 3 months later. It arrived at Belgrave in 1968 and was hauled to Menzies Creek for static display in the museum. 1986 saw the commencement of restoration the Belgrave workshops and has been restored to its 1946 to 1954 condition with raised cab roof, raised marker lamps, steel cow-catchers and all-over black livery. It was returned to service on April 18, 2004. Service History : Jun 1926 - Moe - initial allocation of a new locomotive Jun 1926 - Oct 1954 Moe Oct 1954 - Jan 1955 Workshops Jun 1955 - May 1962 Colac Jul 1962 - Dec 1965 Workshops - Stored Jan 1968 - Feb 1968 Belgrave - Stored Feb 1968 - 1982 - Menzies Creek Steam Museum 1982 - 2004 - Under restoration Apr 2004 - Belgrave - In active service at Puffing Billy Railway BelgraveHistoric - Victorian Railways - Narrow Gauge - Garratt Steam Locomotive - G42 Victorian Heritage Register (VHR) Number H2187 G42 Garratt Steam Locomotive made of steel, iron and wrought iron with brass fittings - the Locomotive is in Active Service - Belgrave Station G42puffing billy, narrow gauge, garratt, g42, steam locomotive, beyer peacock, victorian railways -
Bendigo Historical Society Inc.
Sign - ADVERTISING SIGN BOARDS PAINTED GLASS RAYMOND V KELLY. SIGNED BY N. LEVES
Painted Glass, Hinged, Wooden Framed, advertising boards.. All seem to be from the same location. 'Raymond V Kelly' studio. Two panels have been signed by N. Leves, Nth. Melb. All panels in quite good condition. 'Incorporating Raymond V. Kelly Studio' x 1 'High Art' x 3 (N. Leves N. Melb) in Bottom LH 'Portraiture' x 1 'Photographers' x 2 (one signed N Leves, N. Melbourne) Approx 1200 x 30cm 'Photographers' x 1 small LEVES.- On the 14th inst., at his residence, 117 Queensberry-street, North Melbourne, N. Leves, art decorator and glass embosser, late of Garratt- house, Surrey, England, and of Rothesay, Dunedin, aged 43 years. Ref: Family Notices. (1890, March 17). The Argus (Melbourne, Vic. : 1848 - 1957), page 1. http://nla.gov.au/nla.news-article8595014 DSC_0310 renamed to 7280.1 Item catalogued as 7230.1 stored in Box 301 Others to be catalogued as 7280.2 - 7280.5 s -
Bendigo Historical Society Inc.
Clothing - MAGGIE BARBER COLLECTION: CREAM SILK AND TULLE VICTORIAN EMBROIDERED BODICE, Layte 1800's - early 1900
Clothing. Beautiful deep cream silk bodice, fully lined with cream tulle/net. Elbow length sleeves have a semi-circle of embroidered silk, and an embroidered tulle ''flounce'', edged with cream cord - 17 cms long. The bodice has seven pin-tucks, angled from the shoulder to the waistline on each side of the front and back. Between the pin-tucks at centre front panel is an extensive cream silk, floral embroidery. A rounded neckline at front and back, is in-filled with embroidered tulle - small 1 cm diameter flowers, in a 3 cm diameter circle, defined by 12 small (3mm) embroidered circles. The tulle infill extends to a 7 cm high stand-up collar-supported by seven plastic ''bones''. The collar also features the same, circular, floral embroidery, and is also edged at the throat with cream cording. The bodice while in good condition, has been cut at the hemline, and a 10.5 cm strip of fabric has been added but unfinished. 18 metal hooks, and hand-stitched loops fasten the back of the bodice. Sleeves are an extension of the bodice.costume, female, cream silk and tulle bodice -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Railway Commissioner Harold Clapp and Mrs. Clapp, 1938
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Railway Commissioner Harold Clapp and Mrs. Clapp ready to leave Albury on the "Spirit of Progress" in 1938. The Driver is George Lynch Snr. and the Fireman is E. Finley. Sir Harold Winthrop Clapp (7 May 1875 – 21 October 1952) was a transport administrator with the Victorian Railways who over the course of 30 years revolutionised the railways in Victoria. Clapp introduced faster services and more powerful locomotives, supported the farming sector and presented a report on standardising rail gauges which then led to a uniform rail gauge across capital cities. His most well-known project was the upgrade of the Sydney Limited service into the all-steel, all-air-conditioned, non-stop, high-speed express streamliner, Spirit of Progress which was launched on 17 November 1937. Clapp became Chairman of Commissioners of Victorian Railways in 1920 and remained Chairman until his retirement in 1951. Harold W Clapp was appointed a Knight Commander of the Order of the British Empire (KBE) in 1941 in recognition of his contribution to public service.railways wodonga, fred rochow, wodonga railwaymen, s class locomotive -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Cleaning Crew for the 'Sir Thomas Mitchell" Locomotive S301, 1938
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Left to right: Jack Hinchcliffe, George Lynch, Bill Orchard, Hec Lloyd, ; BILL ROWE; Bill Rowe, Bill McLaren, Jack Dore, Jack Bowden, George Judge, Harry Alderson, Charlie Edmondson, Fireman Cyril Hughes. Cyril Hughes was born on 30 January 1903, started cleaning on 17 December 1924 and passed his Driving Qualifications on 27 June1941. "Sir Thomas Mitchell" Considered by many to be Victorian Railways' greatest passenger locomotives, the 4 S class steam locomotives were the first 3 cylinder steam locomotives. This small class was built to run the Melbourne to Albury passenger trains and spent their entire careers on the North East line. They were built unstreamlined and ran in this condition until 1937. The streamlining modifications complimented the all new "Spirit Of Progress" carriages. The S class ran the "Spirit" until 1952 at which time the newly delivered B class diesels took over. Locomotive S301 - the "Sir Thomas Mitchell" was withdrawn in October 1953, having covered 1,414,367 miles. On the locomotive in the background "SIR THOMAS MITCHELL"railways wodonga, fred rochow, wodonga railwaymen, steam locomotive s301, locomotive "sir thomas mitchell" -
National Wool Museum
Tool - Grinder, 1960-69
Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Bicentennial Train Locomotive 3801, 29 October 1988
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Bicentennial Train hauled by Locomotive 3801 passing through Wodonga. Locomotive 3801 was built by Sydney company The Clyde Engineering Co. Ltd., Granville in 1943 as the first of five streamlined (C) 38-class locomotives for the New South Wales Government Railways’ top-link express passenger duties. The delivery of 3801 was much delayed due to wartime labour & material shortages, together with competing wartime construction priorities. After many years of service, 3801 had been scheduled for withdrawal in 1962 due to deteriorating mechanical condition, but rail enthusiasts raised sufficient funds to cover the cost of its overhaul. 3801 joined the collection of the New South Wales Rail Transport Museum (NSWRTM), Enfield on withdrawal from NSWGR service and continued in operation as a tour locomotive. It hauled the “Western Endeavour” on the first crossing of the Australian continent by a standard gauge train from Sydney to Perth and return in August – September 1970. 3801 also stars in the railway film ‘A Steam Train Passes’ made by Film Australia in 1974 By 1976 had been withdrawn from service due to poor boiler condition and placed on static display by the Rail Transport Museum in Thirlmere, NSW. The Locomotive remained in Thirlmere until 1983 when it was decided it should be restored for the Australian Bicentenary in 1988. A new organisation was created specifically for the purpose of operating 3801, and thus 3801 Limited was incorporated on 5th June 1985. Work on the locomotive was completed after three years, with 3801 making its debut at a special Railway Ball hosted in its honour on 29th November 1986. During the Australian Bicentenary celebrations in 1988, it operated an extensive program across Australia visiting every mainland capital accessible by rail including an appearance at AusSteam ’88 in Melbourne in October 1988, stopping over in Wodonga on the way. After the company’s 20-year lease on the locomotive expired in 2006 Railcorp chose not to extend the agreement, and the locomotive returned to the Rail Transport Museum at Thirlmere (now the NSW Rail Museum). 3801 was withdrawn from service in 2007 for major boiler repairs. Locomotive 3801 was officially relaunched at Sydney's Central Station on Friday 12 March 2021 by Her Excellency, the Honourable Margaret Beazley AC QC, Governor of New South Wales.On front of locomotive Australia Bicentennial logo and sign "BICENTENNIAL TRAIN/3801" railways wodonga, fred rochow, locomotive r761, bicentennial train, locomotive 3801 -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Bicentennial Train Locomotive 3801 arriving in Albury, 29 October 1988
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Bicentennial Train hauled by Locomotive 3801 arriving at Albury Station, Locomotive 3801 was built by Sydney company The Clyde Engineering Co. Ltd., Granville in 1943 as the first of five streamlined (C) 38-class locomotives for the New South Wales Government Railways’ top-link express passenger duties. The delivery of 3801 was much delayed due to wartime labour & material shortages, together with competing wartime construction priorities. After many years of service, 3801 had been scheduled for withdrawal in 1962 due to deteriorating mechanical condition, but rail enthusiasts raised sufficient funds to cover the cost of its overhaul. 3801 joined the collection of the New South Wales Rail Transport Museum (NSWRTM), Enfield on withdrawal from NSWGR service and continued in operation as a tour locomotive. It hauled the “Western Endeavour” on the first crossing of the Australian continent by a standard gauge train from Sydney to Perth and return in August – September 1970. 3801 also stars in the railway film ‘A Steam Train Passes’ made by Film Australia in 1974 By 1976 had been withdrawn from service due to poor boiler condition and placed on static display by the Rail Transport Museum in Thirlmere, NSW. The Locomotive remained in Thirlmere until 1983 when it was decided it should be restored for the Australian Bicentenary in 1988. A new organisation was created specifically for the purpose of operating 3801, and thus 3801 Limited was incorporated on 5th June 1985. Work on the locomotive was completed after three years, with 3801 making its debut at a special Railway Ball hosted in its honour on 29th November 1986. During the Australian Bicentenary celebrations in 1988, it operated an extensive program across Australia visiting every mainland capital accessible by rail including an appearance at AusSteam ’88 in Melbourne in October 1988, stopping over in Wodonga on the way. After the company’s 20-year lease on the locomotive expired in 2006 Railcorp chose not to extend the agreement, and the locomotive returned to the Rail Transport Museum at Thirlmere (now the NSW Rail Museum). 3801 was withdrawn from service in 2007 for major boiler repairs. Locomotive 3801 was officially relaunched at Sydney's Central Station on Friday 12 March 2021 by Her Excellency, the Honourable Margaret Beazley AC QC, Governor of New South Wales.On front of locomotive Australia Bicentennial logo and sign "BICENTENNIAL TRAIN/3801" railways wodonga, fred rochow, locomotive r761, bicentennial train, locomotive 3801 -
The Beechworth Burke Museum
Photograph, c. 1870
This photograph was captured at an undisclosed location and at an unidentified time but likely dates to approximately 1870. The photographer's details are not recorded and the identities of the men in the image are also not known. This image depicts a group of 10 men in typical miners fashion. Four of them are sat on a large log with one holding a small dog. Six miners stand behind those sitting. All these men are wearing a white button-up shirt and tan coloured work trousers. They wear heavy boots and seven have included a dark vest over their shirt. The man holding the dog has a pipe in his mouth. Two of these men are clean shaven with the remainder sporting a moustache and two with a beard. The ages of these men vary from late 20s to middle age. This group of men are located in a mining location with what appears to be an open cut mine in the background of the image. The ground is muddy and has elements which can help identify it as a mining location based on the condition of the landscape. The bottom of the men's trousers are muddy which provides the assurance that these men were working in this location when their photograph was captured. In the background there is one structure, possibly a dwelling, and bush which identifies the location as Australia. Open cut sluicing is a method used to extract gold and other precious metals from beneath the surface of the earth. This technique involved the use of high-powered hoses which broke down the soil enabling miners to come along and search this soil for gold. After the gold rush of the early 1850s, diggers had to enlist the assistance of heavy machinery and techniques like hydraulic sluicing in order to reach gold because the surface alluvial gold had already been discovered and removed. This heavy machinery was not used until after 1853. The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about sluicing and the methods used to find gold in the late 1800s and early 1900s. It also shows a location where sluicing was undertook which provides insight into the impact of sluicing on the environment at a time when it was done. Images, like this one, of Australian gold rush history can reveal important information about the social and environmental impact of this period. This image depicts diggers standing in a mining location and therefore, this image has the capacity to reveal or support significant information for researchers studying the fashion and social status of diggers in Australia in approximately 1870. It can also provide information on the landscape of Australia in this period and the impact of mining for gold on both society and the Australian landscape. The Burke Museum is home to a substantial collection of Australian mining photographs which can be used to gain a deeper understanding into life on the gold fields, technology used in mining, the miners themselves and the impact of the gold digging on the environment.Sepia toned rectangular photograph printed on matte photographic paper mounted on board.Reverse: 1997.2518mining, goldfields, beechworth, 1870, australia, australian goldfields, diggers, victoria, sluicing, gold mining, miners, diggers victoria -
The Beechworth Burke Museum
Photograph
The photograph depicts two young men standing atop a prominent outcrop at Lake Sambell, with buildings visible on the further shore. The present day park and reserve occupies the site of the former Rocky Mountain Mining Company, an open-cut sluice mine that began operations in the mid-Nineteenth Century and operated until the early 1900s, through the peak of Victoria’s Gold Rush. It was converted into a park and leisure area in the 1920s. Lake Sambell was formally opened to the public on Friday 5th October 1928 and was opened by the Victorian Government’s Minister of Lands, Mr Bailey, as part of initiatives to boost the economies and development of country towns. The lake was named after Mr L.H. Sambell, a shire engineer and secretary of the Forward Beechworth Committee who was involved in promoting the transformation of the mining site and promoting plantation forestry and tourism as alternative industries. £300 to begin the process was provided by Mr J. McConvill, a former resident of Beechworth, who is remembered in a street name adjacent to the lake. An article in the Ovens and Murray Advertiser on Saturday, 5th May, 1917, gives some insight into issues in the Rocky Mountain Mining Company’s final years. The writer details the 1917 annual meeting of the Rocky Mountain Mining Company, stating that locals present appeared ‘well pleased this important local industry is in such a prosperous condition and that future prospects are so encouraging’. The author describes plans to give workers a bonus as evidence of profit-sharing that would ‘bridge the gulf between capital and labour’. The article concludes, however, with the statement that ‘there is a little arithmetical puzzle in the report in connection with the dredging operations I have been unable to solve.' The photograph is significant as it contributes to knowledge about how Beechworth reinvented itself after the Gold rush period, and more broadly how country towns repurpose and redevelop infrastructure and facilities to meet the present needs of their population. Sepia rectangular photograph printed on matte photographic paper. Obverse: nil. Reverse: 3471 / Velox (paper mark)beechworth, beechworth lake, lake sambell, l.h. sambell, mcconvill, rocky mountain mining company, rocky mountain mining co, minister of lands, forward beechworth committee, wallace park-lake sambell development scheme, wallace park lake sambell development scheme, lake, sambell, j. mcconvill, recreation, reserve, park, transformation, repurposed, redeveloped -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Photograph - Black & White Moorabbin Football Club Premiers 1946, c1946
Moorabbin played initially in the Federal Football League, making their debut in 1909 and competing until 1950. The club wore a black and white jumper like Collingwood. During this time the club won 12 premierships, including winning all six premierships staged over the nine years between 1940 and 1948 (the competition was in recess from 1942 until 1944) Moorabbin had a comparatively brief but quite successful stint in the Victorian Football Association between 1951 and 1963. The club won premierships in 1957 and 1963, and managed a highly impressive overall success rate of 62.5%. However, there was a sensational aftermath to the 1963 flag as Moorabbin fell foul of the VFA after agreeing to sell its ground to VFL club St Kilda. After a bitter wrangle the eventual upshot was that the Moorabbin committee voted 19-2 to disaffiliate from the Association. Before joining the VFA Moorabbin had spent four highly successful decades as a member of the Federal Football League and its precursor the Federal Football Association. During its debut season in the VFA the club played its home matches at Cheltenham, but the development of a new ground in Moorabbin had been a condition of entry. By 1952 that new ground, Moorabbin Oval, was ready, and over the ensuing eleven seasons it would become one of the most difficult grounds in the VFA for visiting teams to win at. Prior to entering the VFA Moorabbin enjoyed premiership success in the Federal Football League on a dozen occasions, including four times in succession between 1945 and 1948.. The Moorabbin name is now used by the Moorabbin Kangaroos Football Club in the Southern Football League. The club was originally known as Moorabbin West Football Club, taking on the new name from 2003. Moorabbin Football Club was established 1909 and was very successful playing in the Federal Football League, Victorian Football Association. Sadly was removed from the Linton St. Oval 1963, after winning the Premiership, by Moorabbin City Council and St Kilda VFL team took over.Black & White photograph showing Moorabbin Football Club 1946 Premiership in Federal Football LeagueMOORABBIN - PREMIERS 1946 / Back Row C.Thomas, S.Cato, D.Murnane, F.Stone, / Standing - H.Dolman (trainer), A.Ayers, K.Burke, W.Cann, A.Cann,J.Carpenter, J.Carpenter, J.Erickson, G.Emblin, A.Leitch, W.Comber (trainer) / Sitting - E.Freeman (trainer) E.MxInerney, F.Smith,S.Plowright, R.Fox (Captain Coach) R.Bailey (vice.Captain)F.Keogh, R.Stafford, C.Jones (Secretary)moorabbin football club, victorian football association, victorian football league, moorabbin kangaroos football club, st kilda football club, linton oval moorabbin, north melbourne football club, smith j l, smith mary ann, stanley helen, chaff cutter, horse drawn carts, toll gates brighton, motor cars 1900, steam engines, early settlers, bentleigh, parish of moorabbin, city of moorabbin, county of bourke, moorabbin roads board, shire of moorabbin, henry dendy's special survey 1841, were j.b., bent thomas, o'shannassy john, king richard, charman stephen, highett william, ormond francis, maynard dennis, market gardeners, vineyards, orchards, sport -
Australian Gliding Museum
Machine - Glider – Sailplane, 1972
The Hall Cherokee II glider is an American design for amateur construction from plans. The designer was Stan Hall (1915-2009), a professional engineer, who gained extensive experience in the United States aviation industry during World War 2 including the programs for military gliders. He continued to work as an engineer for aircraft manufacturers and as a consultant to the industry after the war. He was active in gliding and, in particular, the home built sailplane movement. The Cherokee II was one of about 10 glider designs that he produced: it came out in 1956. It is understood that over 100 Cherokee gliders have been built. In Australia the number is possibly 10 or 11. The Hall Cherokee VH-GVO was built by R.D Meares of Caringbah, New South Wales. The glider was registered as VH-GVO on 11 October 1973 and given serial number “GFA-HB-82” by the Gliding Federation of Australia. The Logbook for VH-GVO appears to be a complete record of the flying history; in aggregate 210 hours 40 minutes in the air from 331 flights. The first test hop occurred on 29 July 1972 at Camden, New South Wales. VH-GVO was last flown on 22 July 1986. Many of the flights recorded are of one or two hours duration. The glider was last inspected and certified as airworthy and in a reasonable condition at the Hunter Valley Gliding Club in July 1986. Since that time, until transferred to the Australian Gliding Museum, the glider was in storage. Structural restoration work has been completed on the fuselage and one wing. However, inspection of the other wing revealed extensive damage to the ribs and spars and consequently a decision was taken to make it a static exhibit. The exhibit is an example of home built construction of a type that has proved popular amongst amateur glider builders.The Hall Cherokee (formerly registered as VH-GVO) is a single seat wooden home built glider. The glider is constructed from wood, plywood, fabric and metal fittings, all commercial grade except for main wing fittings, pulleys, cables and bolts. The fuselage is simple with four main longerons and bulkheads with diagonal bracing. The wing has two identical solid spars which form a geodetic structure, hence the leading edge is non-structural. Registration VH-GVO – serial number GFA-HB-82 australian gliding, glider, sailplane, hall, cherokee, meares, hunter valley gliding club -
Melbourne Legacy
Audio - Recording, tape, Legacy House, by Legatee Grat Grattan
The tape has not been played from the label it is Legatee Grat Grattan talking about Legacy House. Legatee Grattan was very important member of Legacy for many years. He was well placed to tell the story of the donation towards Dureau House as L/ Grattan was pivotal in it's story. BG Corporation of New York used 'Brown and Dureau' as agents in Melbourne for their spark plug manufacturing (for the American aircraft based in Australia during the war). A royalty of two shillings and sixpence was agreed. The entrepreneur President of BG Corporation was Richard Goldsmith. L/ Grat Grattan had a friend Mr Edwards who was managing director at Brown and Dureau and heard of the desire by Goldsmith to leave a permanent memorial to ex-servicemen in Australia (Children's Hospital was considered). Grat took Edwards to Market St and showed him the inadequacy of the building. It was agreed if Melbourne Legacy could come up with a purchased building in 10 days they would get the money needed. The property purchased was 'Storey Hall' in Swanston St (also called Hibernian Hall in other documents). After the war it turned out not to be suitable and a new building was required. Contents TBC 'Perhaps his most lasting monument is Melbourne Legacy House. Through his friendship with one of the principals of the firm, Brown and Dureau, Legacy was given a donation of 30,000 pounds in 1944. A condition of the donation was that Legacy had only eight days in which to buy a building. A building across the road from the Royal Melbourne Institute of Technology was bought for 18,000 pounds and the balance invested. The building was sold in the early '50s and the proceeds plus the invested money enabled Legacy to buy its headquarters, Dureau House, in Swanston Street in 1955."It may be confirmed when played but it is likely a significant recording of the history of the acquisition of Dureau House.Clear plastic cassette tape in a cardboard box.Cardboard box, rainbow, C20, Tape a letter. Cassette, side 1 - Legacy Week by Legatee Grat Grattan, 1, Rainbow, Tape a Letter. 10 minutes per side. side 2 - as above.legatee, grat grattan, dureau house -
Merri-bek City Council
Archival pigment print, Hoda Afshar, Behrouz Boochani – Manus Island No.2, 2018
Hoda Afshar's 2018 body of work, "Remain," offers a forthright and unapologetic political commentary on Australia's border protection policy, shedding light on its impact on human rights. This collection comprises a film and a series of photographic portraits that chronicle the stories of stateless men who chose to stay on Manus Island, Papua New Guinea, even after the closure of the immigration detention centre in October 2017. In the accompanying film, the experiences of these men are conveyed through episodic fragments, narrated with a mix of lyrical and brutal voiceovers. Some express themselves through poetry, others through song, while some recall the riots and suicides. Set against the backdrop of a picturesque landscape featuring lush foliage and crystal-clear water—a stark contrast to the harsh realities described—the emotional impact of the work is intensified. It creates a simultaneous sense of beauty and horror. The photographic portraits of the same individuals are equally compelling. Positioned prominently against a dark backdrop, these subjects assert their presence, emphasizing their right to be seen. The deliberate simplicity of these portraits serves as a powerful political statement, countering the invisibility imposed by the act of detention. Afshar metaphorically acknowledges the struggles faced by these men, depicting them contending with the elements—fire, water, and earth—yet never questioning their inherent humanity. Here we see Behrouz Boochani, the Kurdish Iranian writer whose memoir ‘No Friend but the Mountains: Writing from the Manus Prison’ won the Victorian Premier’s Prize for Literature and the Prize for Non-Fiction in 2019. Boochani was held in detention on Manus Island from 2013 until the centre’s closure in 2017 and was forced to remain on the island in a stateless condition. -
Moorabbin Air Museum
Accessory (Item) - Beaufighter Pilots Escape kit
-
Ballarat Tramway Museum
Photograph - Black and White photograph/s - mounted, Richards & Co Ballarat
Mounted black and white photograph of 30 uniformed ESCo Ballarat employees in a room seated or standing in four rows.. Date on rear of photo mounting is 1915. Different image and arrangement of employees to that in Reg Item 708 and 2238. Image 1 of the photograph and part of the mounting. Print 152H x 200W. Mounting is cardboard with a depressed photo mount area, with actual printed surrounded by another sheet of white paper (now off white). Cardboard has a light grey colour finish. On the bottom right hand side is the photographers name "Richards & Co., Ballarat". Image 2 - mounting and photograph showing general condition of the mounting. On rear is a taped sheet of paper (see images 3 and 4), giving some of the names of the people, identified by A. Walker, 1/10/69. Left to Right Back: - Stokoe, - , - , G. O'Hara, C. Ereuson?, Jolly, Powell, - . 2 - C. Johns, - , Davey, -, -, -, -, -. 3 - -, A. Johnston, F. Greenfields, Insp Salthoose, -, -, -, Egan. 4. M. Rawlings, J. Lasey, R. Haines, F. Jarces, R. Corby, -, -, T. O'Donnell (this list has not be audited against employees register at time of cataloguing) trams, tramways, esco, employees, group photo -
Bendigo Historical Society Inc.
Ephemera - HOWARD AND VIOLET JOLLEY COLLECTION: NEWSPAPER CUTTINGS
A book titled 'Newspaper Cuttings' in gold leaf with black leather binding and corners on blue cloth covered cardboard cover. Stiff paper pages inside numbered top right -hand corners 1-90 in printed black ink. Poor condition overall. Pages 37 - 44 missing. Page 45-46 pertaining to Violet Jolley separately bagged. Entries mostly pertain to Mr Howard Jolley , an aviation field inspector of the Life Insurance Company of Australia. First entry page 16 -17 contains photographs and newspaper cuttings relating to an air crash on Bendigo racecourse in May 1921. Jolley was involved in numerous air-crashes for the next ten years. Photographs and newspaper cuttings related to these, along with dinner invitations, etc, are pasted into the book. Entry's into the book finish shortly before his death as a result of an air crash in 1931.Enclosed in pocket: copies of newspaper articles relating to the death of Howard Jolley in aircraft accident; donation form from Janice van der Spek, copy of advertisement Howard Jolley, touring Australia on life insurance business.bendigo, history, aviation 1920s. -
Melbourne Tram Museum
Newsletter, Norm Cross, Preston Workshops, "Around the Tracks Newsletter of the Workshops", 1986
Set of three magazines, A4 photocopied titled ""Around the Tracks Newsletter of the Workshops"" edited by Norm Cross stapled on the left hand side, during the early days of The Met. .1 - Issue No. 18, Feb. 1986, 10 sheets, with a photo for Senior Foreman Greg Lourey on the front cover, report by Howard Smith on the 1985 Christmas Picnic, retirement of Safety Officer Frank Huffer after 49 years of service, article on Greg Lourey, second part of John Prideaux article on Cambodia killing fields, and a list of the pop art trams and repairs needed to the tramcars. .2 - Issue No. 11, March 1986, featuring a photo of MMTB 197 on the front cover, personality profiles on Joe Vizzini, Doug Kerr, a preview of the film Malcolm, notes on the condition of some trams, W5 situation and workshops notes. .3 - Issue No. 12 - May 1986, featuring photo of Les Jewell and Brendan Creasy on uni cycles, comments on Norms editorial in the previous issue by Craig Roach, article on Bruce McKenzie, profile on Norm Cross written by Norm Cross, Bryan Egan - storeman, Preston Workshops Social club, Aussie slang words,Yellow highlighted applied where Norm's name is mentioned or his columns.trams, tramways, preston workshops, the met, unions, transporting art, malcolm, w5 class -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Bicentennial Train Locomotive 3801 passing Wodonga Signal box, 29 October 1988
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Bicentennial Train hauled by Locomotive 3801 passing the Wodonga Signal box. Locomotive 3801 was built by Sydney company The Clyde Engineering Co. Ltd., Granville in 1943 as the first of five streamlined (C) 38-class locomotives for the New South Wales Government Railways’ top-link express passenger duties. The delivery of 3801 was much delayed due to wartime labour & material shortages, together with competing wartime construction priorities. After many years of service, 3801 had been scheduled for withdrawal in 1962 due to deteriorating mechanical condition, but rail enthusiasts raised sufficient funds to cover the cost of its overhaul. 3801 joined the collection of the New South Wales Rail Transport Museum (NSWRTM), Enfield on withdrawal from NSWGR service and continued in operation as a tour locomotive. It hauled the “Western Endeavour” on the first crossing of the Australian continent by a standard gauge train from Sydney to Perth and return in August – September 1970. 3801 also stars in the railway film ‘A Steam Train Passes’ made by Film Australia in 1974 By 1976 had been withdrawn from service due to poor boiler condition and placed on static display by the Rail Transport Museum in Thirlmere, NSW. The Locomotive remained in Thirlmere until 1983 when it was decided it should be restored for the Australian Bicentenary in 1988. A new organisation was created specifically for the purpose of operating 3801, and thus 3801 Limited was incorporated on 5th June 1985. Work on the locomotive was completed after three years, with 3801 making its debut at a special Railway Ball hosted in its honour on 29th November 1986. During the Australian Bicentenary celebrations in 1988, it operated an extensive program across Australia visiting every mainland capital accessible by rail including an appearance at AusSteam ’88 in Melbourne in October 1988, stopping over in Wodonga on the way. After the company’s 20-year lease on the locomotive expired in 2006 Railcorp chose not to extend the agreement, and the locomotive returned to the Rail Transport Museum at Thirlmere (now the NSW Rail Museum). 3801 was withdrawn from service in 2007 for major boiler repairs. Locomotive 3801 was officially relaunched at Sydney's Central Station on Friday 12 March 2021 by Her Excellency, the Honourable Margaret Beazley AC QC, Governor of New South Wales.On front of locomotive Australia Bicentennial logo and sign "BICENTENNIAL TRAIN/3801" railways wodonga, fred rochow, locomotive r761, bicentennial train, locomotive 3801 -
The Beechworth Burke Museum
Animal specimen - Silver Gull, Trustees of the Australian Museum, 1860-1880
The Silver Gull is more commonly referred to as the 'Seagull'. Found all along the coast of mainland Australia and Tasmania, it can also be found in New Caledonia and New Zealand. These birds are a common nuisance at beaches and urban areas, such as shopping centres. Since the 1950s, humans have become increasingly wasteful, leading to an explosion of the Silver Gull population due to the availability of rubbish to scavenge. They feed mainly on small marine life, but they are a versatile scavenger. The population increase has impacted the breeding of other bird species, as Silver Gulls have dominated offshore island breeding grounds. Their breeding season is from August to December, when they nest on the ground, however mating can occur year-round. This species has a harsh, high-pitched call 'kwarwh', well known to all Australians. Although protected under Australian Environmental Law, there are many strategies in place to discourage increasing the numbers of Seagulls. This specimen is an inaccurate example of a Silver Gull, which although is in good condition and intact, does not look like an accurate representation of this species. The legs have been mounted too far towards the tail on this specimen, giving it an unbalanced appearance. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This adult Silver Gull has a white head, body, underpart and tail. Its wings are silver-grey, with black and white tips. It has an orange-red bill, feet and beak, indicative of its maturity. The irises are white. This specimen stands upon a wooden platform and has an identification tag tied around its leg.Swing-tag: 11a / Silver Gull / See catalogue, page, 40. taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, seagull, silver gull, australian bird, nuisance -
Eltham District Historical Society Inc
Negative - Photograph, Tom Prior, Main Road near Eltham Railway Station, c.1910
View looking south along Main Road, Eltham from near present day Luck Street. On the immediate right is a fence with the words “Hot Water” painted on it followed by William J Capewell’s butcher shop, then the slaughter yard and saleyards with the entrance access to the railway station. Contained within the saleyards facing the street, a small shelter with the name H.H. Clark upon it. Horace Harold Clark was the son of Eltham State School’s first Head Teacher, David George Clark. As well as being a farmer, he was an Estate Agent and conducted auction sales, presumably from this shelter. The large weatherboard building on the corner (opposite present-day Arthur Street) with signs for Summer Drinks and Hot Water painted on the side is Luther and Ada Haley’s General Store and Bakery, built 1902. This was the first building in what is now Eltham’s present shopping town centre. Haley previously ran the General Store and Bakery on the corner of Main Road and York Street until his lease expired and the premises were bought by Mrs Sarah Burgoyne in 1902. The store later was known as Staff's Store. In the distance approximately mid-way between the Butcher shop and the Bakery are the tops of what appears to be two cypress trees, which could well be the trees in front of the Shillinglaw Cottage facing Main Road. On the eastern (left) side of Main Street is Haley’s Paddock, which was used on occasions for community picnics. Capable of holding 10,000 people, with ample shade and hilly surroundings it was an ideal place for any community gathering such as the State Schools’ Picnic in 1904. Picture dated as c.1910 based on similar picture published in the Weekly Times, Feb. 1912. Kerb and channelling added 1923. Cross Ref: 610 (looking north), 611 (later stage), 613. Same as 705 (though in better condition)This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital image 4 x 5 inch B&W Neg 120 format B&W negative (spare)shire of eltham pioneers photograph collection, eltham, main road, butcher, eltham railway station, railway station, w.j. capewell, baker, eltham town centre, general store, luther haley, reynolds prior collection, shops, haley's paddock, hot water, m.m. clark, sign, summer drinks, eltham sale yards, eltham slaughter yard, staffs general store -
Falls Creek Historical Society
Poster - Kangaroo Hoppet 2011
The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2011 the Men's Winner was Petr Novak from the Czech Republic in a time of 1:16:04. The winner of the Women's event was Esther Bottomley of Australia in a time of 1:42:22. Due to lack of snow, the course had to be relocated to the Mt McKay area at the top of the ski resort. The 42km Hoppet course was shortened to 30km.This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster featuring a group of competitors from a previous Hoppet event. A Kangaroo Hoppet road sign is on the left. The page border is yellow. Logos of AGL, Falls Creek All Season Alpine Resort, Alpine Shire, Tourism Victoria, Parks Victoria and the Birkebeiner Nordic Ski Club are across the bottom of the poster.At the top: Kangaroo HOPPET 21 Australia's PREMIER X-COUNTRY SKI RACE On the road sign: KANGAROO HOPPET 42km Beneath the image 27th August 2011/ 42KM 21KM 7KM Below the line of logos: Ph. 03 5754 1045 / [email protected] www.hoppet.com.au Across the bottom in larger cursive text www.hoppet.com.aukangaroo hoppet, worldloppet events, falls creek, mt. beauty -
Bendigo Historical Society Inc.
Instrument - ORGAN: OSCAR FLIGHT MEMORIAL ORGAN
Pedal Organ. Possibly belonged to Oscar Flight (Snr). Oscar Flight was a well known and Highly respected Musician in Bendigo. Lived at 44 Carpenter St, Quarry Hill. The father of The Engineer/Surveyor Lt Oscar Thomas Flight. Pedal Organ. This is a “Two Pedal” organ with a 50 Ivory Key, keyboard. The woodwork is relatively good condition. Across the front of the organ and just above the Keyboard are the words “Aucher Freres - Paris'' Lt Oscar Thomas Flight, No 2 Squadron AFC Lt Flight was a 20 year old university student from Bendigo, Victoria when he enlisted in the AIF and embarked for overseas as a Sapper (service number 3018) with the 5th Field Company Engineers (FCE) from Melbourne on 24 November 1915 aboard HMAT Ceramic. After serving in France with the 5th FCE, he transferred to the AFC on 28 August 1917 and graduated as a pilot on 22 January 1918. After being posted to France on 27 February 1918, he was captured on 28 March 1918 and held as a POW in Germany until repatriated to England on 13 December 1918. Lt Flight arrived back in Australia on 7 April 1919. Oscar Flight served as a lieutenant in the Second AIF.person, individual, oscar flight -
Bendigo Historical Society Inc.
Clothing - VICTORIAN BODICE - CINAMON COLOURED SILK, OVERLAID WITH LACE, 1850's
Light camel coloured silk (in very poor condition). Long sleeves overlaid with fine black lace in a floral design. Stand-up collar, five cm deep is overlaid with the fine black lace, and finished with a corded braid on the upper edge. Sleeves are tightly gathered at the shoulder tapering narrow at the wrist, giving a ''leg-o-mutton'' effect. 12cm wide fine black lace, attached at the neck edge, and shoulders, forms a ''puff'' decorative over the shoulder, and continues in a ''over-panel'' to the waistline. Ten x 1cm diameter plastic buttons, with a floral impression in them (2 missing) and 12 hand stitched button holes form the front opening. From the lower opening, six ''pintucks'' 12 cm deep, open into pleats at the lower edge, giving fullness to the bodice. Four metal hooks are evident on the lower tucked front and seven hand stitched eyelets are indicated, but are now severely damaged. Bodice is boned with ten X 17cm long bones, and is fully lined with cotton.A tiny 8cmX7.5cm, oval-at-one-end, pocket is stitched into the front opening, at the bustline. Back hemline dips to a V shape at centre backcostume, female, victorian bodice - cinamon coloured silk -
Ballarat Tramway Museum
Document - List, State Electricity Commission of Victoria (SECV), Details of Ballarat Trams - marked up
Demonstrates the source of the tramcars for both Ballarat. Gives details on equipment, sizes and seating capacity of the tramcars as at August 1964 with hand written notes about the acquisition and disposal of some of the tramcars.Printed List of trams and their details for Ballarat Trams ( similar to item 3430.1), dated 5-September-1966, titled "Numbers and Particulars of Trams". Handwritten notes have been made for the acquisition dates for the tramcar and disposal details of the vehicle along the top edge. 3430 - Ballarat - typed carbon copy - two sheets, were taped together. Gives details of where purchased from , date of purchase, type, body builder, seating capacity, overall length, overall height, overall width, condition of tram, trolley base, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel base, axle diameter, motors type and maker, Motor horsepower, Armature bearings, suspension bearings, gear teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and details of advertising space in racks. At base has typed (original) list of trams of the two types, single truckers and bogie trams. List of trams includes the scrubber and No. 20 which was scrapped prior to system closure. Handwritten notes have been made for the Acquisition dates for the tramcar and disposal details of the vehicle along the top edge.tramcars, ballarat, sec, disposal, sale of trams, acquisitions -
Kew Historical Society Inc
Clothing - Black Lace Evening Dress, c.1907
Lily and William Wishart lived during this period in 'Noranook', Fernhurst grove, Kew. There are numerous contemporary accounts of the social and civic activities of Lily Wishart as mayoress of Kew. In a description of a 'Mayoral At Home' in the Kew Recreation Hall, a report in The Australasian (10 Aug 1907, p.46) described the event thus: MAYORAL AT HOME In the Kew Recreation-hall on Thursday evening the Mayor and Mrs. W. Wishart gave an at home to between two and three hundred guests. ... Prior to the musical programme, the mayor and mayoress held a reception, standing on a dais at one side of the room. Mrs. Wishart was gowned in black glace silk, trimmed with handsome lace applique, and she wore a cream Maltese lace scarf over her shoulders, and held a bouquet of cardinal carnations.' This may be the dress in the collection. Another interesting and relevant report is an account in The Argus (19 March 1907, p.6): 'WOMEN'S WORK EXHIBITION The mayoress of Kew (Mrs. W. Wishart) invited the ladies of the district to meet in the mayor's room, town-hall, Kew, at half past 3 o'clock tomorrow afternoon, to consider steps to be taken locally in support of the proposed Exhibition of Women's Work.'The dress is locally significant as the work of a skilled home-dressmaker in Kew, who was also a leading civic figure in the municipality. One tends to think of amateur dressmakers as women who could not afford to purchase clothes from a retailer. Clearly, 'women's work' and the skills that educated and wealthy women acquired in the period allowed them to fashion their own garments.Full length evening dress in four parts. Undergarments include two items: a basic black silk petticoat and an upper black silk slip, the latter with two bands of ruffles. The lace dress is in two parts: a bodice and a skirt. The black, high-necked bodice is constructed of silk organza to which guipure lace has been extensively applied. The bodice has long puffed sleeves, gathered on the forearm to form a wide band of lace and ribbon at the wrist. The skirt is constructed of the same black fabric with descending bands of gathered black silk ribbon, used as ornamentation. The skirt also features a long train. Apart from the donor information about its provenance, the style of the dress can confidently be dated to the period 1900-1910. The dress was made and worn to civic functions by Mrs Lily Wishart, Mayoress of Kew in 1906-7. Earlier items belonging to William and Lily Wishart entered the collection as early as 2002. The dress was donated by a descendant of a friend of Lily Wishart in 2020. The photograph of the dress and its components attached to the record needed to be digitally enhanced so that details of the dress could be viewed online, as the fabric of the dress is an intense black. A physical assessment of the dress is included in the condition report.fashion & design collection - kew historical society, australian fashion - 1900s, evening dresses, lily clara wishart, fashion design, fashion -- 1900s -
Heidelberg Theatre Company Inc..
Program Photos ReviewSet Design, Liliom by Ferenec Molnar directed by Joy Youlden
The Adult Education Association Drama Group originally staged Liliom at the Union Theatre, University of Melbourne on Saturday, 3rd November, 1951, at 8pm and on the 8th November it was re-staged by them as the opening production of the The City of Heidelberg Repertory Company, now known as the Heidelberg Theatre Company Inc. in the Eistedford Hall, Ivanhoe. Sketch for Prologue, Fair Ground Scene, and Sketch for Scenes 2 and 3, The Tin Type Shop, for Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951. Resulting sets were transported to the Eisteddfod Hall, Ivanhoe and used in the opening production in January, 1952 for the newly formed City of Heidelberg Theatre.Sketch for Prologue, Fair Ground Scene, and Sketch for Scenes 2 and 3, The Tin Type Shop, for Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951. Resulting sets were transported to the Eisteddfod Hall, Ivanhoe and used in the opening production in January, 1952 for the newly formed City of Heidelberg Theatre. Sketch for Prologue, Fair Ground Scene, and Sketch for Scenes 2 and 3, The Tin Type Shop, for Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951. Resulting sets were transported to the Eisteddfod Hall, Ivanhoe and used in the opening production in January, 1952 for the newly formed City of Heidelberg Theatre Company. Photo from unidentified newspaper of the director of Liliom by Ferenc Molnar, Joy Youlden.an Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951 and restaged at the Eisteddfod Hall, Ivanhoe as the opening production in January, 1952 for the newly formed City of Heidelberg Repertory Group. The Adult Education Association Drama Group performers, backstage workers and technicians staged the play at the Eisteddfod Hall in Ivanhoe. Local Councillor E.A. Carlyle attended and addressed the audience. Reg Rudd is described as director-producer. He announced another Repertory evening in February. Inagural production under the name of The City of Heidelberg Repertory Company, now known as the Heidelberg Theatre Company Inc., staged in the Eisteddfod Hall, 14 Ivanhoe Parade, Ivanhoe, Victoria, Australia on the 8th November, 1952.All items in good condition. Original and one colour photocopy of hand drawn sketches for the Prologue and Scenes 2 and 3 settings in blue biro with watercolour washes on ecru paper. On the back side of paper with scene sketch of Act 1. Photo – Joy Youlden - Small black and white cutting from unidentified newspaper on newsprint which has yellowed, Cutting has been glued onto ecru A4 paper sheet. Sketch for Scene 6, The Land Beyond, and Sketch for Scene 7, Julies House 16 Years later, an Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951. Resulting sets were transported to the Eisteddfod Hall, Ivanhoe and used in the opening production in January, 1952 for the newly formed City of Heidelberg Repertory Group. Sketches for Scene 4, The Railway Embankment, and Sketch for Scene 5, Behind The Shop, an Adult Education Association Drama Group production at the Union Theatre from 1st – 3rd November, 1951. Resulting sets were transported to the Eisteddfod Hall, Ivanhoe and used in the opening production in January, 1952 for the newly formed City of Heidelberg Repertory Group. Handwritten detail of scene numbers and names, name of producer, theatre company AEA (Adult Education Association) Drama Group Show and place, Union Theatre.eistdford hall, fern matthews, city of heidelberg repertory group, adult education association drama group, liliom, liliom by ferenec molnar directed by joy youlden, 1952, 1 -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - "Spirit of Progress" test run, November 17, 1937
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.The "Spirit of Progress" on a test run prior to its official launch being hauled by Locomotive S303. It was named the C.J. LaTrobe after the1st Lieutenant-Governor of Victoria, Charles Joseph Latrobe. Considered by many to be Victorian Railways' greatest passenger locomotives, the 4 S class steam locomotives were the first 3 cylinder steam locomotives. This small class was built to run the Melbourne to Albury passenger trains and spent their entire careers on the North East line. They were built unstreamlined and ran in this condition until 1937. The streamlining modifications complimented the all new "Spirit Of Progress" carriages. The S class ran the "Spirit" until 1952 at which time the newly delivered B class diesels took over. The 4 S class locomotive which were allocated to the "Spirit of Progress" were S300 - the "Mathew Flinders", withdrawn in September 1954, having covered 1,379,791 miles. S301 - the "Sir Thomas Mitchell", withdrawn in October 1953, having covered 1,414,367 miles. S302 - the "Edward Henty", withdrawn in July 1954, having covered 1,446,468 miles and S303 - the "C.J. Latrobe", withdrawn in May 1954, having covered 1,434,664 miles.On the lower front of the Locomotive "S303"railways wodonga, fred rochow, wodonga railwaymen, spirit of progress, s class steam locomotives -
Orbost & District Historical Society
black and white photograph, July 1922
A new bridge over the Snowy River at Orbost was opened for traffic on June 20th 1922. It was designed for future joint use by road and railway traffic, but it was only used for road traffic. During the last few years the condition of an old suspension bridge [the 1893 bridge] which was the only vehicular crossing between the town of Orbost and the railway station, caused much concern. The structure was of timber, except for the wire suspension cables of its central span of about 100 feet. A design was prepared in 1914 for a permanent bridge with five spans of 85 feet composed of plate girders on concrete piers. With great increase in the price of steel work during the war, the cost of this design became prohibitive, and the need for a new structure becoming urgent, alternative proposals were investigated. As a result the present design was adopted as providing a sem-permanent bridge at moderate cost. The new bridge spans the river about 160 feet upstream from the old bridge on a slight skew, the piers being at an angle of 80 degrees with the centre line of the bridge. It has a camber of about 2 feet 5 inches in its total length of 527 feet. ( information from Newsletter March 2014 - Lois Crisp) The photograph shows Mrs James Cameron cutting the ribbon at the opening of the Orbost Pile Bridge in 1922. This second bridge, was built by the Victorian Railways and the Country Roads Board. Constructed at a cost of 35,000 pounds and used second-hand girders from the Flinders Street- Spencer Street viaduct. On July 4 1922 it was officially opened by Mrs James Cameron. Unfortunately, her husband, who had long championed the building of the bridge so that it would be ready for the railway to continue to the border, was too ill to attend the ceremony. In fact, James Cameron died on July 13 after a long and severe illness (ref. S.R.M. 20.7.1922). There is a section of this ribbon in the collection - Registration No. 366. This is a pictorial record of a significant event in Orbost's history.A black / white photograph of a pile bridge with a suspension bridge behind it. There are many people standing on the bridge.on back - "Opening of Pile Bridge - 1922"snowy-river-bridge ceremonies cameron-mrs -
Bendigo Military Museum
Honour Board - BEEHIVE STORE HONOUR BOARD WW1, Bee Hive Staff, Photographic Honour Roll Members of the Beehive Emporium Staff who served in the Great War WW1, c1918-1925
This honour roll was found in poor condition in a district antique shop. It was fully restored by an enthusiastic local lady, It was presented to the Soldiers Memorial Military Museum on 20 April 2022. The Museum is now known as the Bendigo Military Museum. The Beehive was a major store in Pall Mall Bendigo, the Main Street through the centre of the City. Names on the roll. Top row, E. Buddle, Edgar Peter No 4450 14th reinforcements 6th BN. R Jenkins, Reginald Claude No 4526 14th reinforcements 6th BN. H Crowalladar. Spelt wrong, actually Thomas Henry Cadwallader No 4160 13th Reinforcements 7th BN KIA 18.8.1916. J. A. Williams, John Arnold No 9797 16th reinforcements 2nd Fld Amb. J. Holl, James Thomas No 2432 5th reinforcements 60th BN. 2nd row, N. Veale, (Veal) Norman Joseph No 2070 5th reinforcements 14th BN Major Robert Oswald Henderson D.S.O, 38th BN HQ, KIA 29.9.1918. Rank at death Lt Colonel. P, Buddle, Thomas Percy No 3359 9th Reinforcements 58th BN KIA 27.4.1918. 3rd row. C. Wood MM, Charles No 2453 5th Reinforcements 24th BN, MM 20.9.1917, Bar to MM 14.6.1918. T. Henderson MM, Thomas Richard, 15th Reinforcements 5th BN (2nd Lt). Awarded MM after joining the Canadian Army. F. Marriot, Frederick No 1897 13th Reinforcements 4th LH Regt, MM 2.11.1917 4th row. N Meagher, Norman Bernard No 43 38th BN HQ. G.Speedy, George Thomas No 21718 General reinforcements Army medical Corp 1917. W. Trebilcock, William Edward No 55239 5th General Reinforcements (Vic) 1918. C. P. Fisk, Charles Reginald No 55371 6th General Reinforcements (Vic) 1918. "MM" Military Medal "DSO" Distinguished Service Order The frame is a flat faced hardwood timber, varnished. Each corner has a decorative scroll work of leaves and flowers. They are dark brown colour. There is a gold rim around the inside of the picture frame. Inside are 15 oval openings, in which are black and white portraits of WW1 soldiers. The writing and captions are in white paint. Each name has a decorative loop around it. There are two sets of National flags painted near the top. Red and blue tints.ww1, honour roll, beehive