Ten unique hand painted poles (wooden telegraph poles) reflect the surroundings of Lake Wendouree and tell First Nations' peoples stories. Tom Clark created the Koori Totem Poles prior to the establishment of the North Garden Indigenous Sculpture Park. The work is a set of 10 poles decorated and carved with ‘Koorie’ motifs and references and was commissioned originally for Ballarat’s Begonia Festival. These poles were shifted from the Ballarat Botanical Gardens main area in 2015 to their present site guarding the northern entrance to North Gardens.The artworks are of aesthetic and cultural significance to the people of BallaratTen hand painted wooden telegraph polestotem poles

A Legacy ceremony at the Shrine of Remembrance. It was the annual "Anzac Commemoration Ceremony for Students" event held on 7 April 1993 - the 70th Anniversary year for Legacy. The ceremony provides a valuable opportunity for students to gain an appreciation of the Anzac spirit, the significance of the Shrine and the meaning of Anzac Day. The photos show a group of students with wreaths walking up the steps of the Shrine. Also one of the Governor of Victoria, Richard E. McGarvie inspecting the Cadet Guard of Honour, with school choirs on the steps. And inside the Shrine. These pictures were published in the Answer in May 1993.A record of a ceremony for school students at the Shrine.Black and white photo x 3 of a schools service at the Shrine in 1993.Handwritten in blue ink on the back "B pg 11" and "B pg 10"anzac commemoration for students, wreath laying ceremony, answer, governor of victoria

This handset appeared via Australia Post Office and was to some degree manufactured in Britain just prior to 1939. During and after World War II these handsets were made in Australia. The handset belonged to the SEC Victoria and later the Kiewa Hydro Electricity Scheme. As this unit has a winder arm (to notify the switchboard) it would have resided in a workshop/machine shop and not in an office. The durability of the bakelite covering gave good protection in any environment. In years later the bakelite came in colours. This type of handset being able to endure rough handling was ideal for the surroundings of the alpine terrain. It would have been at the various outside outposts or foreman posts as swift communications was essential and communications with all sectors of work in the Hydro Electricity Scheme was mandatory, not only for safety reasons but also for efficient operational day to day progress. Also refer to article in "This Week" Newsletter 30th June 2023. Article attached to paper copy.This Australian Post Office 184 black coloured bakelite wall mounted phone was initially developed by Ericsson Telephones Ltd Britain. It was used by the SEC Office based at Mount Beauty and therefore has a winder (for power and notification to the switchboard. The hand piece (large ear and voice receptors)is placed vertically above the dial up winder.On the winder plate in hand writing is" turn handle lift handset" and below the handle "when finished replace handset turn handle"sec communications, wall telephone, internal communications kiewa hydro electricity scheme

Two women approach to enter Mirridong, with assistance from four others. From the left, the first woman speaks as she places her hand around that of the second woman's grip on a wooden cane. The second woman wears dark glasses, and has both a female and male holding her right arm. The male in the middle also holds the hands of a fourth woman, who has her other hand held by a man holding an envelope and standing behind suitcases.1 B/W photograph of people entering KelastonCK72 1/3 size also head only women 1st and 3rd from leftassociation for the blind, kelaston home (ballarat)

Tilly Aston wearing a dark coloured plain dress with lace cuffs and a hat adored with flowers and ribbon on the side. She stands with her arm holding the back of a chair, and in her hand she holds a purse. Around her neck rests a multi-swirled scarf and around her neck lays a necklace with a single bead. Unknown date, however this portrait was taken at the Gainsborough studio, which was also used for another portrait shoot. Various tones and sizes have been made.B/W photograph in various tonesGainsborough ... embossed upon lower left cornertilly aston, gainsborough studio

Details the many components that went to make up a Melbourne cable tram grip. All drawings prepared by the MMTB. The second set has more components, generally bolts. See pdf files cable grip part 1, part 2 and part 3 for full details. R3485 - General Arrangement - provides a list of the parts Index - lists all the parts and relevant drawing number R3486 - Cable Grip Lever R3487 - Cable Grip Palm Handle R3488 - Cable Grip Pawl Rod Bracket and Bolt R3493 - Pawl Box, Guard Plate and Bolt R3494 - Pawl Latch Bracket R3496 - Adjusting Screw R3498 - Cable Grip Socket R3499 - Shoe and Shoe screws R3501 - Cable Grip Link R3502 - Quadrant R3503 - Crossbar R3504 - Slide and Slide end R3505 - Cheek R3506 - Protection Piece R3510 - Top Die Holder R3511 - Back Guard R3512 - Die R3513 - Bottom Die Holder R3514 - Sole Plate R3515 - Sheave R3518 - Swinger R3519 - Swinger Frame and Setscrew R3525 - Top Guide Plate R3534 - Sheave Protector R3535 - Sheave Centre R3541 - Hornbar WasherSet of 31 blueprint drawings within a brown paper folder and two brass fold back pins securing the drawings. Second copy - set of 38 drawings, black and white, loose in a sleeve. Has Mr Pratt on front cover. Date Stamped "6 Mar. 1934"trams, tramways, cable trams, cable grip, mmtb, lists

Used to pack congnac in when transported from France to Melbourne Wharf and probably used as a seat or a step at Days Mill.Squat wooden box, closed top and with inscription on each end. Residue of paper label on top.On one end, star motif and illustration of an arm, in armour, holding a fighting axe. Under this, "Jas. HENNESSY / CONGNAC" On other end engraved into wood, "PRODUCE OF FRANCE" On one side, engraved, ""H T / MELBOURNE WHARF / 47" This side has additions in pencil and star motif in RH top corner.

The Squirrel is a small to medium sized member of the rodent family Sciuridae. They are commonly located in America, Eurasia and Africa. The Squirrel was introduced to Australia by humans. Interestingly, the tail of the Squirrel serves the purpose of keeping the rain, wind or cold off the body of the animal, to help it cool off in hot weather, to counterbalance when moving and can be utilized as a parachute when jumping from one location to the next. Squirrels consume foods that are rich in protein, carbohydrates and fats. They eat nuts, seeds. fruits and vegetation. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Carolina Squirrel specimen has dark grey coloured fur. This specimen stands on a wooden platform and its arms are stylized in a raised position next to its face. A paper tag hangs from the right arm with a smaller tag attached to the left. The squirrel has dark black glass eyes and sharp claws on the hands and feet.A.4480 36. Carolina Squirrel / Catalogue, page, 49 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel

This set of calipers was used for measuring and marking in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This calliper is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This calliper was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Calipers, metal, two arms joined by hexagonal bolt. Made by Moore & Wright, Sheffield, England. Maker’s name pressed into metal on arm. Use to measure thickness of materials. This set of calipers is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “MOORE & WRIGHT / SHEFFIELD ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, technical drawing instrument, calipers for drawing and measuring, moore & wright of sheffield england, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument

This item probably belonged to Albert Coulson a farmer of Brodribb. Friendly Societies were founded in the Australian Colonies in the mid-19th Century by immigrants from England who had been members in Societies which dated back to the 18th Century. Like all working people these immigrants experienced sickness, accidents, unemployment, death and burial. They needed help of like fellows to tide their families over these times. So they formed a branch of one of the Friendly Societies back in the mother country. The idea was to make fixed contributions to a fund and when they were off work they would receive a payment. When they died funeral benefits would be paid and the widow and children would be cared for. It was a form of local insurance for hard times. This book was used in a time of 'look after yourself' as the Colonial Governments did not provide pensions or benefits. This item reflects those times.A small grey book with the Manchester Unity Independent Order of Oddfellows. At the bottom of the cover in black print is the society's Coat of Arms showing a woman holding a child with two children beside her. On the right is a woman holding an anchor with her arm around a woman holding a cross. There is an images of a group of people holding a scroll beside a reclining lion."Brother A.H.J. Coulto was initiated a member of the Loyal Orbost Lodge 8 Sept 1909"

This Chancellor's academic gown was worn by Professor David Caro during his time as the University of Ballarat's Chancellor from 1998-2005. Among his many roles during his long career, he was Deputy Vice-Chancellor at the University of Melbourne, Vice-Chancellor of the University of Tasmania, Vice-Chancellor of the University of Melbourne & Interim Vice-Chancellor at Northern Territory University. The Chancellor's academic gown is of royal blue light weight woollen cloth trimmed with gold oak-leaf braid on the facings, yoke and bottom hem; and sleeves with one gold embroided frog at the shoulder and four chevrons of gold oak-leaf braid below the arm hole. A gold embroided button and gold tassel are centred on each chevron.Makers embroidered patch - R.W. Bredin & Son, Academic, Legal & Civic Robe Makers, Melbourne, Australia federation university, university of ballarat, chancellor's academic gown, emeritus robert h t smith

Small, three quarter length portrait of a couple. The lady is wearing a long dress with embroidery and a long lace collar. The man is wearing a three piece suit? With a darker jacket. The lady is standing on his right with her arm through his. The photographer's name and a border are printed in gold on the front. The photographer's name is also printed in brown on the back.St. Georges Hall Photo Compy, Bourke St. E, Melbournephotograph, portrait, couple, portrait of a couple, st george photo compy

Large horse-shoe shape - flexible, possibly cardboard, covered with 4.5 cm wide cream ribbon, overlaid with gathered tulle. A 1.00 cm wide nylon ribbon forms a 50 cm loop for the bride's arm, and is finished at the top of the horse-shoe with a bow, and a sprig of waxed orange blossom. A card is attached - refer below to wording.To Merle and Jack, wishing you both happiness in the years to come, With love and kisses, Eileen.costume accessories, female, wedding horse-shoe charm

Likely to be a German designed operating chair. Very similar to operating chair shown in [Aesculap] Aktiengesellschaft fur Feinmechanik vormals Jetter & Sheerer, "Illustriertes Musterbuch", 1904, Tuttlingen, South Germany, p. 720, no. 34, 412 Fig 1 & 2. Early twentieth century examination chair constructed of metal and leather. The structure is metal and painted with cream enamel. The seat and seat extension are covered in brown leather. It has two folding sections with metal leg rests, and a base on castors. There are three holes in each arm rest, possibly indicating missing attachments. The chair is adjustable to horizontal.examination, furniture, royal australian college of surgeons

Clothing. Child's cream coloured sleeveless linen petticoat. Round neckline with casing. Arm holes edged with embroidered stitches. Hem trimmed with two rows of 2.5 cm lace with scalloped edge. Centre back opening (20 cm) fastened at neck with cotton tape tie through casing. Garment matches 11408.56 (Underpants).costume, children's, child's cream sleeveless petticoat

Clothing. Child's cream coloured sleeveless linen petticoat. Round neckline with casing. Arm holes edged with embroidered stitches. Lace trim above hem with 2.5 cm eyelet lace around hem. Centre back opening (19cm) fastened at neck with cotton tape tie through casing. Garment matches 11408.57, (Underpants).costume, children's, child's cream sleeveless petticoat

From the Chapman family photograph albumPhoto on card backing. Studio portrait of couple, in front of photographers drape background. Gentleman has a moustache and is in a three piece suite with large tie, corsage. Woman is in white dress and collar with puff sleeves, waist with white tie. Woman is resting her hand on husband from behind. Her other arm is resting on table with fern. Uncle John and Auntie Clara Henderson. Stawell Photographic Co. Close Railway Station, C Herbert.

This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"

George Clarkson was Head Teacher at Linton State School between 1887 and 1891.Sepia studio photograph believed to show George Clarkson, a teacher, and his family. Photograph shows a woman in long gown with white collar, seated with right arm resting on lap, a bearded man in suit with tie, seated with hands resting on each lap, and young man in suit, collar and tie standing at back between them.old lintonian collection, george clarkson, teachers

Other photographs in album of this area dated 1928Black and white photograph of the North Arm Bridge, taken from Kalimna Heights looking towards the Entrance and Bullock Island. Bridge has no side rails, appears to be chain and wire between concrete posts. Sedan car passing over the bridge. The walking track to Kalimna Heights visible right foreground. Lakes Entrance Victoriabridges, waterways, transport

NC Van The NC guard's vans were originally classed NDD. In the 1910 reclassification they were classified NC. Apart from the windows and height they were externally the same as the NBC vans. Inside there were benches along both side walls. One end was equipped with a small guard's compartment. This had two corner seats, two desks with ticket selling windows and a letter rack. A novel feature was a folding dog cage under one of the benches. Six NC Brake Van / Guards Vans were built by Victorian Railways 1 NC was built in 1909 as NDD and reclassed 1NC in 1910. 2 NC was built and placed into service Nov 1912 3 NC , 4 NC and 5 NC were built and placed into service June / July 1914 6 NC was Built and placed into service in 1919 1 NC, 4 NC and 6 NC were all scrapped by Victorian Railways between 1954 and 1957 Van 5NC - Brake Van (4 ton capacity) In Active Service - Belgrave Station Yard VR Service History: 5 NC *NC 5.VA - 31/ 7/1914 NWS Built new - / 6/1926 - Modified AC Malco 16/11/1932 NWS Into Workshops - 9/12/1932 NWS Out of Workshops (24 days) 23/10/1935 NWS Into Workshops - 19/11/1935 NWS Out of Workshops (28 days) 10/ 8/1939 NWS Into Workshops - 8/ 9/1939 NWS Out of Workshops (30 days) 2/ 6/1944 NWS Into Workshops - 25/ 8/1944 NWS Out of Workshops (85 days) 21/ 4/1949 NWS Into Workshops - 14/10/1949 NWS Out of Workshops (178 days) Dec 2016 - Puffing Billy Register of Rolling Stock NC 5 Brake Van (4 ton capacity) - In traffic Historic - Victorian Railways - Narrow Gauge Rolling Stock - NC Brake Van Victorian Heritage Register (VHR) Number H2187 The Puffing Billy Rolling Stock CollectionBrake Van (4 ton capacity) made of Timber and wrought iron5NCpuffing billy, 5nc, 2'6" gauge, victorian railways, 5nc brake van

NC Van The NC guard's vans were originally classed NDD. In the 1910 reclassification they were classified NC. Apart from the windows and height they were externally the same as the NBC vans. Inside there were benches along both side walls. One end was equipped with a small guard's compartment. This had two corner seats, two desks with ticket selling windows and a letter rack. A novel feature was a folding dog cage under one of the benches. Six NC Brake Van / Guards Vans were built by Victorian Railways 1 NC was built in 1909 as NDD and reclassed 1NC in 1910. 2 NC was built and placed into service Nov 1912 3 NC , 4 NC and 5 NC were built and placed into service June / July 1914 6 NC was Built and placed into service in 1919 1 NC, 4 NC and 6 NC were all scrapped by Victorian Railways between 1954 and 1957 2NC - Brake Van (4 ton capacity) VR Service History 26/11/1912 NWS Built new 2 NC *NC 2.VA - 26/11/1912 NWS Built new - circa 1926 - Modified AC Malco BO 6/ 7/1932 NWS Into Workshops - 5/ 8/1932 NWS Out of Workshops (31 days) 2/10/1937 NWS Into Workshops - 3/12/1937 NWS Out of Workshops (63 days) 25/ 1/1945 NWS Into Workshops - 23/ 2/1945 NWS Out of Workshops (30 days) Dec 2016 - Puffing Billy Rollling Stock register Puffing Billy Service History or Notes 21 Oct 1995 - Loco 7A and 2 NC collides with trolleys NK 3, Jenny, & NG 1 on the SELBY side of the MONBULK CREEK trestle bridge. Historic - Victorian Railways - Narrow Gauge Rolling Stock - NC Brake VanBrake Van (4 ton capacity) made of Timber and wrought iron2NCpuffing billy, 2nc, 2'6" gauge, victorian railways, 2 nc brake van

Henry George Roberts was born in Lambeth, Middlesex, The United Kingdom on 17 June 1885. The son of Elizabeth and Corporal Thomas Roberts of 2/3rd Regiment of Foot, The Buffs. Thomas Robert died in 1893 and on 28 September 1894 Henry was admitted to the Royal Military School as an apprentice. He remained there until 7 July 1900 when he enlisted at Aldershot, in the 2nd Dragoon Guards as a boy soldier. The 1901 and 1911 Censuses record him as being a musician with the 2nd Dragoon Guard, (The Queen’s Bays). Roberts married Lily Winterbourne Quinton in early 1912, a son Frederic was born on 1 February 1913. By August 1914 Roberts has travelled to Australia where he was employed as a musician and residing at “Quamby” Royal Park, Melbourne. His wife and child remaining at Mellison Road, Lower Tooting, London. On 8 September 1914 he enlisted in the Australian Imperial Force in Melbourne, allotted Regimental Number 42, the Rank of Trooper and allocated to A Squadron, 8th Australian Light Horse Regiment. His enlistment papers raise a mystery. He stated that he and six years’ service with the Territorial Hampshire Carabiniers but made no mention of his eleven years’ service with the Regular 2nd Dragoon Guards. There is no clear answer as to why this misinformation was provided. Roberts was promoted to Sergeant on 28 October 1914. His occupation and prior experience resulting in Roberts’ appointment to the leadership of the regimental band. After training in Australia, he embarked on the Star of the Sea at Port Melbourne on 25 February 1915 arriving in Egypt on 14 March. On 16 May 1915 he proceeded to Gallipoli where he was killed in action on 7 August 1915 during the attack on the Nek. He has no known grave and is commemorated at the Lone Pine Memorial for the missing. For his service in The Great War, he was awarded the 1914-1915 Star, British War, and Victory, Medals. Circular metal medallion with image of Britannia standing with a lion issued to NOK of No 42 Sergeant Henry Roberts 8th Australian Light Horse Regiment who was killed in action at the Nek 7 August 1915. The plaque about 120 mm in diameter, was cast in bronze, and came to be known as the "Dead Man’s Penny", because of the similarity in appearance to the much smaller penny coin. 1,355,000 plaques were issued, which used a total of 450 tons of bronze,Henry Roberts and continued to be issued into the 1930s to commemorate people who died as a consequence of the war.Henry Robertswwi, world war one, gallipoli, nek, 8th, light horse, roberts

Small, oval waist length portrait of Soln Small, oval waist length portrait of Soln S. Allsop. He is wearing a jacket over a waistcoat. The jacket is buttoned at the neck. He also has a watch chain. He is seated in a chair with his left arm resting on the chair's armrest. Photographer's name and address printed on the front and back. Printed on the back is 'Prize Medal, Wisbech Industrial & Fine Art Exhibition May 1886. S. Allsop. He is wearing a jacket over a waistcoat. The jacket is buttoned at the neck. He also has a watch chain. He is seated in a chair with his left arm resting on the chair's armrest. Photographer's name and address printed on the front and back. Printed on the back is 'Prize Medal, Wisbech Industrial & Fine Art Exhibition May 1886.Edward Johnson, Lower Hill House, Wisbechphotograph, portrait, male, portrait of soln s allsop, edward johnson

Mr. Bralsford,the Transport Manager at Royal District Nursing Service (RDNS), is instructing RDNS staff in the responsibilities of driving an RDNS vehicle. The Sisters were undergoing a Post Basic Course given by RDNS Educators, Car maintenance was necessary from 1937 when a car was donated by the Rotary Club to Melbourne District Nursing Society, (MDNS). Another car was donated, by General Motors-Holden, via the Duchess of Gloucester, in 1947, and the fleet began to grow from 1950 with seven Ford Prefects being provided by the Hospital and Charities Commission. For many years Melford Motors in South Melbourne maintained the MDNS fleet, until the fleet grew to the point of, the now named, Royal District Nursing Service (RDNS) providing its own Car Maintenance Division to service the cars regularly. The Royal Automobile Club of Victoria, (RACV), attended any breakdowns which occurred when nursing staff were on the road. Each new Sister employed by the Service was taken out for a driving test before she drove a District car. Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used; bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state they were sold in 1927. A Motor Auxiliary was formed in 1929 to take Sisters to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled until, having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own full fleet of vehicles by the mid 1960s. In many areas there were unsealed roads, in various conditions, which the Sisters negotiated to reach their patients to give care. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Melways Directory of maps was introduced in 1966 which was a boon to the Sisters, though it was a few years before it went beyond Seville, so those that did the Warburton and Powelltown area worked off a large paper map. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph showing Mr. Bralsford instructing RDNS staff. In the left foreground is Sister (Sr) Liz Thomson who has her dark hair drawn back, is looking down at a piece of white paper resting on the arm of the wooden chair on which she is sitting. In front of her are the back views of Sr. Betty McDonald with curled dark hair and to her right is Sister Joanne Wilkinson. Mr. Bralsford, who has short dark hair; is wearing glasses, and wearing a grey coat, is standing in front of them pointing to a blackboard with his extended left arm and hand. He is looking down, and has his right hand on a piece of white paper on a desk. A strip heater is high on the left hand wall.Photographers stamp and Quote No. GW 101royal district nursing service, rdns, rdns transport, rdns education, melford motors, racv, sister liz thomson, sister betty mcdonald, sister joanne wilkinson, mr bralsford

This photograph shows a Melbourne District Nursing Service (MDNS) Sister is visiting the lady in her own home and is giving medication in the form of an injection which has been ordered by a Doctor. The Sisters is wearing her grey cotton uniform frock under her white gown and her grey peaked hat. The Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS), later known as Melbourne District Nursing Service and from 1966 Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Trained nurses (Sisters) provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.Black and white photograph showing a Melbourne District Nursing Service (MDNS), Sister on the left of the photograph giving an injection into the upper right arm of a lady. On the right of the photograph is an elderly lady who is sitting on a chair, she has white short curly hair; is wearing glasses and wearing a black and white patterned dress. Her head is turned to her right and she is smiling at the Sister.as she holds up the sleeve of her dress with her left hand. The MDNS Sister, who is wearing her uniform peaked grey hat over her short blond hair and wearing a white gown over her grey uniform with peaks just seen, is smiling at the lady. In both hands she.is holding a glass and metal syringe; the needle is inserted in the lady's arm.Photographer stamprdns, royal district nursing service, melbourne district nursing service, mdns, mdns patient care - injection

This photograph is showing a procedure performed by an RDNS Sister in the home of an elderly lady.Education was an integral part of Melbourne District Nursing Society (MDNS) from its inception in 1885, later called Royal District Nursing Service, (RDNS). Only Trained Nurses were employed by the Society, and on visits to patients they taught the necessity of hygiene and cleanliness, as well as the need for a good diet, to bring about good health. Doctor’s lectures were later given at the MDNS home to instruct patients and their families on prevention of disease. Education to patients continued throughout the years regarding health care and the use of equipment in the home. In 1961 Education programs commenced at MDNS with Sisters receiving In-service education. Staff could also apply for scholarships to further their education outside of RDNS. At RDNS many programs were run, including: a Post Basic Course, Cardiac Rehabilitation Nursing, Haematology/Oncology Nursing, Palliative Care program, Diabetic Stabilization Program, Leg Ulcer Management Program, HIV/AIDS Nursing Care, Cystic Fibrosis Home Support, Veterans Home Care Program, Breast Cancer Support Program, Continence Management Program, Stomal Therapy Program, In-Home Lactation Support Program and a Community Nursing Education Program extended to student nurses from hospitals and to other nursing organizations. RDNS staff attended several hospitals to observe and learn special care needed to some clients, e.g. to the Austin Hospital to learn the care required for paraplegic and quadriplegic clients at home and to Mount Royal Hospital to observe the care of clients in the rehabilitation ward.This Black and white photograph is showing Sister Liddalow, of the Royal District Nursing Service (RDNS), linking up a home dialysis unit into the left arm of an elderly lady. The lady who wears glasses and has wavy hair, is wearing a white nightdress with lace at the neck and down the centre front. Her left arm is resting on top of a surgical cover and she is clenching her left fist and has a tourniquet above her elbow. She is sitting against a flower patterned pillow on her bed watching the procedure. Sister Liddalow has short dark hair and is wearing a white gown over her uniform. She has a glove on her right hand and a syringe in her hand. In the left rear IV apparatus, with two syringes and a trolley on which a machine can be seen.date of photographroyal district nursing service, rdns, patient care - home dialysis, sister liddalow,

The object is a cast iron plaque.The Melbourne branch of the Royal Mint was established in 1965 after negotiations between Victoria and the British Exchequer. The original site contained 9,763 square meters and included a large area at the rear of the building. On this area, November 16th, 1869, the erection commenced of a single storey building forming three sides of a courtyard and containing workshops, laboratories and coining hall. The Guard Houses and this existing building, which completed the courtyard and housed administrative offices, deputy master's quarters and bullion room followed. All these buildings were designed by J. J. Clark, architect with the Public Works Department. The official opening took place on June 6th, 1872, when the first gold sovereigns were minted. IN 1970 the Public Works Department commenced the restoration and adaptation of this building and the Guard Houses for their present purposes. historic building, former royal mint