In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8" Convex, Moseley & Son London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘40’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/4" Convex. Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘41’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8" Ogee, Simms Queen St West London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘42’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/8" Cove, Moseley & Son London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘43’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, White Oak & Metal, 7/8" Curved, H Wallis Wmsburg Mass.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘44’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 3/8" Angle (45).Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘45’ added on entering the collection in 2010.moulding planes, carpentry tools, bertie greenwood, woodworking tools, burwood road — hawthorn (vic.)

Marble and alabaster

Used for carting rock to crushing batteries, road making, railway track building.Single horse drawn tip dray, restored by G & S Little in 1999. Made of timber with metal fittings and wheel rims. Enclosed sides with hinged front and rear panels. Chassis and wheels painted dark red, body in dark blue.Rectangular brass plaque on LHS looking forward detailing restoration and possible usage.transport ..... horse-drawn

Single horse drawn dray (non-tipping) made of timber with metal fittings and wheel rims. Open all round with uprights spaced along the tray. Rail at the top of the uprights. Painted dark brown with unpainted tray boards.No inscriptions or markings.transport - goods; horse - drawn

The museum register is somewhat ambiguous but it is recorded - along with about 12 others - that this specimen was transferred from the 'Nat. Sc. Dept' in September 1899. The specimen also apparently has something to do with Frederick McCoy; his name is entered as the party that identified the skeleton. It seems certain that these were a batch (accession numbers MUZD1113-1126) of specimens given to the university teaching museum during the move of the state museum from the university campus to its subsequent site on Russell St. Examination of the Currawong skeleton (and some of the others in this batch) revels that the specimen has been remounted at some point. The other items in this batch are, like this specimen, predominantly mounted articulated vertebrate skeletons: [Specimens are listed with accession number and name as written in the original register] MUZD1113 - 'Lepus timidus' (Mountain hare), mounted skeleton; currently on display in the Tiegs Zoology Museum MUZD1114 - 'Emydura' (Short-necked Turtle), mounted skeleton; currently on display in the Tiegs Zoology Museum MUZD1115 - 'Astur novaehollandiae' (Obsolete binomial name for Accipiter novaehollandiae - Grey Goshawk); mounted skeleton, currently in storage, disassembled, in the Tiegs Zoology Museum. MUZD1116 - 'Grey crow-shrike ♂' (Grey Currawong), mounted skeleton; currently on display in the Tiegs Zoology Museum MUZD1117 - 'Herpestes, India' (Mongoose sp.), mounted skeleton; currently on display in the Tiegs Zoology Museum MUZD1118 - 'Macropus giganteus (aged[?]), Goulburn River' (Eastern Grey Kangaroo), ♀ skull; whereabouts unknown MUZD1119 - 'Macropus giganteus, ?' (Eastern Grey Kangaroo), skull; whereabouts unknown MUZD1120 - 'Raia ? lemprieri' (Obsolete binomial name for Dentiraja lemprieri -Thornback Skate), stuffed; whereabouts unknown MUZD1121 - 'Cyprinus carpio' (Common carp), skeleton - roughly prepared; whereabouts unknown MUZD1122 - 'Ovis' (Domestic sheep probably Jacob Sheep, '4 horned breed'), skull; whereabouts unknown MUZD1123 - 'Cervus canadensis (Wapiti)', skull and lower jaw - no horns; currently on display in the Tiegs Zoology Museum MUZD1124 - 'Antelope', no further information; whereabouts unknown MUZD1125 - 'Encope emarginata' (Echinoderm), currently on display in the Tiegs Zoology Museum MUZD1126 - 'Heterocentrotus trigonarius' (Pencil urchin), currently on display in the Tiegs Zoology Museum (accession number is not written on wooden base, but on the inside of the specimen.)Mounted skeleton of Grey Currawong (Strepera versicolor). Skeleton is mounted on a black wooden stand with a round base.Accession number '2259' is written in ink on the sternum. Wooden mount has black label with white text on the base reading 'GREY CROW SHRIKE/ STREPERA VERSICOLOR'. animal, vertebrate, bird, skeleton, frederick mccoy, national museum of victoria, passeriformes, artamidae

A cotton bonnet belonging to the family of George Ward Cole’s in the late 1800s. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished. A hand sewn ivory cotton, embroidery anglaise child’s bonnet from the late 1800s. The bonnet fabric design combines features a combination of narrow pin tucking and embroidered flowers on a vine. The bonnet edge is finished with a double-layered delicate gathered lace ruffle around all the edges. The bonnet secures under the chin with a delicate tie made of a similar but plain fabric.george ward cole, st ninians, late 1800s, bonnet, margaret morrison ward cole, agnes bruce ward cole, thomas anne ward cole, brighton

This nightgown is believed to have belonged to Mrs Thomas Anne Ward Cole, an early Brighton resident and wife of George Ward Cole. The item appears to have been made or altered to accommodate a pregnant belly, however purpose made maternity clothing was not common at this time. Mrs Ward-Cole’s six pregnancies took place in 1843, 1844, 1845, 1847, 1849 and 1851. The style of this garment in particular the shape of the sleeves would indicate that it is most likely to have been constructed in circa 1860, so whilst it appears to be a maternity item, and historically has been referred to as thus, this purpose cannot be confirmed. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolishedA hand sewn ivory cotton muslin nightgown, c. 1842–1850. The bodice is made of delicately embroidered muslin in a floral design. The open flat collar features a scalloped lace frill underneath. The bodice fastens with thirteen mother of pearl buttons down the centre front. After the fourth button, the remaining buttons are concealed beneath a full gathered modesty skirt, which falls from just below the bust line. The modesty panel is secured horizontally across the bodice by six mother of pearl buttons. The sleeves finish over the back and palm of the hand in two flattened peaks. The front of the gown consisting of the modesty front is full length. The modesty gown at both sides joins two panels that are an integrated part of the bodice. At the centre back there is a very full gathered panel with lace trim that falls to create a train. It is semi-attached to the bodice with a top section secured with mother of pearl buttons and small ties. The purpose of this design feature is unknown. st ninians, george ward cole, brighton, night gown, thomas anne ward cole

This peignoir or morning gown is believed to have belonged to Mrs Thomas Anne Ward Cole, an early Brighton resident and wife of George Ward Cole. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished.A mid blue-green cotton and lace peignoir or morning gown, c.1860. The bodice starts at the neck with a clavicle height, rounded neckline with a turn down flat collar, and is finished with a cream lace frill next to the face. The sleeve starts at the natural shoulder line and its overall silhouette is reminiscent of a soft three quarter length imbecile sleeve constructed of four layers of alternating fabrics. At the shoulder, there is a blue-green flap, which crosses across the top and back of the shoulders towards the centre upper back in a 'v' shape. Here it finishes where it meets with the gathered top of the fabric that creates the train. Underneath this shoulder flap is a gathered, long cream frill that finishes just above the elbow. Underneath this frill is the full gathered blue-green sleeve. Finally falling from this a second gathered long cream frill finishes at the three quarter arm. The bodice buttons with five metal buttons from the neckline to just above the bust. Here it meets a heavily gathered front in two pieces, which falls with fullness to the floor. This full section is secured closed at the centre front with four hooks and eyes over the bust and then continues with shell buttons through the remainder of the garment.st ninians, george ward cole, morning gown, peignoir, brighton, thomas anne ward cole, margaret morrison ward cole, agnes bruce ward cole

This skirt belonged to Miss Margaret Morison Ward Cole and was reportedly worn for her role as bridesmaid for the marriage of Miss Barkly, daughter of Sir Henry Barkly. George Ward Cole, father of Margaret, was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son at St Ninians in 1867. In later years St Ninians was subsequently sub divided and later demolished. Sir Henry Barkly was the second Governor of Victoria.A cream paper silk taffeta crinoline skirt c.1862. This skirt features a flat front across the front waistband but a gathered across the back. At the front it is floor length whilst at the back it features a small train. Presumably the skirt was concealed at the sides and back at the front features decorations that do not continue around the back. The front decoration consists of three tiers of pleated pale violet to pale pink silk ribbon with a deep drop of cream lace. The final lace tier is gracing the floor. st ninians, george ward cole, brighton, sir henry barkly, crinoline, bridesmaid, margaret morrison ward cole

This gown, one of two similar items in the collection belonged to one of the Ward Cole sisters, Miss Margaret Morison Ward Cole or Miss Agnes Bruce Ward Cole, daughters of George Ward Cole. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son at St Ninians in 1867. In later years St Ninians was subsequently sub divided and later demolished. A black and yellow velvet, wool, lace and silk dress from circa 1882. The bodice features a yellow silk, black lace and black velvet collar finishing high on the neck just below the chin finished with a black lace ruffle. The collar has a flap across the front of the throat that attaches at the side with a V-shaped baseline that contributes to concealing the fastenings of the bodice. The dress features a gathered central panel of black lace covered lemon silk, which falls from the neckline to the floor. At either side of this panel are matching panels of black velvet. The remainder of the dress and sleeves are made of black wool featuring a self-striped and spotted pattern. The dress fastens down the centre front with concealed black buttons hidden underneath the right velvet panel. The head of the Amadis sleeve sits on the natural shoulder line and finishes tightly at the elbow. The volume of the sleeve is created by ten pleats at the head of the shoulder, sewn to the bodice and is gathered at the elbow. The sleeve is finished with a black velvet ribbon with a bow and a black lace frill. The base of the dress is finished with a ruffle of the black dress wool. The dress features a small train. The dress is boned at the back waist and features an inset panel just below the waist of gathered fabric which forms the train. st ninians, george ward cole, visiting gown, brighton, margaret morrison ward cole, agnes bruce ward cole

This gown, one of two similar items in the collection, belonged to one of the daughters of George Ward Cole, Miss Margaret Morison Ward Cole or Miss Agnes Bruce Ward Cole. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished.A black and mint green wool, velvet, lace and silk dress from circa 1882. The bodice features a wired, standing collar, finishing just under the chin and open at the front of the throat. On either side at the front of the throat it features long black lace ties with black jet bead fringe. The centre front of the dress from the neckline to the base of the skirt features an insert panel of mint green corded silk. The silk is gathered and the neckline and waist and overlaid a panel of gathered lacy net. Inserted into the seam at either side of this panel at the waist are two velvet ties. The dress secures closed with eight black buttons and one hook and eye down the right side of the mint panel to mid thigh. The edges of the collar and black front panels are finished with a looped ribbon trim. The remainder of the dress is made of a black wool fabric woven a checkered pattern of larger and looser threads and smaller and tighter threads creating a seersucker like pattern. The bodice features a natural shoulder line and an Amadis sleeve of full cut gathered to the bodice at the shoulder and finishing at the elbow with a large black lace flounce. The front panels of the dress are flat and shaped neatly to the body from neck to hip line and gently out to create the Victorian silhouette. On the back of each shoulder the dress features a leaf like, small jet beaded embellishment with multiple long loops of jet beads falling down the back to the waist. Underneath this embellishment is a pleated black ribbon that runs from the shoulder to the back of the pelvis. Over the pelvis are another two jet beaded embellishments of a floral design with two tassels. The skirt is full and pleated in under this embellishment and fulls to the floor with a small train. The base of the dress is finished with a ruched band of the main dress fabric.st ninians, george ward cole, visiting gown, brighton, miss margaret morison ward cole, miss agnes bruce ward cole, 1880s

Agricultural worker's hand-loomed linen smock, dyed brown. Fully hand-stictched with smocking details on front and back and sleeves. Opening at front and back neck area fastened with now missing buttons.smock, rural dress, linen, hand stitching, agriculture

Mayoral robesBlack Faille ceremonial mayoral robe with lapin collar and sleeve edging, purple sleeve lining.city of greater bendigo ceremonial item

A pennyweight was a unit of mass that was equal in weight to 20 grains, one twentieth of an ounce and one 240th of a Troy pound. The abbreviation for a pennyweight is ‘dwt’ (denarius weight). These measures and weights were typically used for weighing gold and other precious metals. Group of eleven weights and measures including seven rectangular pennyweights with clipped corners and marked 10 DWTS, 6 DWTS, 5 DWTS, 4 DWTS, 3 DWTS, 2 DWTS respectively, two gram weights; 5 grams and 4 grams with top right pressed corner and two cup troy weights marked 4oz TROY and ½.284.1 10 DWTS 284.2 6 DWTS 284.3 5 DWTS 284.4 4 DWTS 284.5 3 DWTS 284.6 2 DWTS 284.7 1 DWTS 284.8 5 GRAMS 284.9 4 GRAMS 284.10 4 oz TROY 284.11 ½ city of greater bendigo commerce, making a nation exhibition, city of greater bendigo mining

Donald Clark Collection. A monochrome photograph depicting men panning for gold at a stream of water, probably at Sandy Creek (Tarnagulla). Copy photograph.

Used by Henry and Martha Sebire at Mont De Lancey . Part of the original furnishings of the dining room. Mass produced. Marie Colling (Sebire) is the great granddaughter of Henry and Martha Sebire.A dark brown wooden carved cased pendulum mantel clock with a highly decorated floral and column transfer design on the hinged glass front and black roman numerals and hands on the white face. Chimes on the hour.Marked inside "Ansonia Clock Co"clocks, mantel clocks

Oak cased static type knife cleaner, with 2 brass labels, bearing Royal Coat of Arms."Fourdriniers" on brass labelsknife cleaners

Cream star patterned doily, with pointed edges and star in centre.In shuttle netting.doilies, table linen.

Gift to Mont De Lancey from Miss Eva Sebiresilver open work cruet set - ornate stand with handle with five compartments for five bottles, three with glass stoppers and two with silver lids. Some etching on it.condiment sets, cruet sets

A tool used in the early 20th Century.A two piece metal wrench with an adjustable chain that is used to tighten around metal objects. It has a double triangular pointed grooved jaw grip, a handle and chain attached. They provide safe, reliable and powerful torque. The dual reversible jaws allow ratchet action in both directions without removing the chain wrench from the pipe.Stamped on the handle - Drop forged from bar steel by J.H. Williams & Co, Brooklyn, NY. On a grip jaw at the top is stamped - No 1, 'W' in a triangle shape, Patented Oct.4 '81, Dec.13 '81, Mar. 14 '82, Sep.25 '83, Feb.14 '88 and Brook Chain Wrench at the bottom.tools, equipment, hand tools, wrenches, steel

Murray Comrie Collection. Information collated by Murray Comrie: Premises of P. Masters, cabinet-maker and funeral undertaker in Commercial Road, next to Cheetham's on the north side. Phillip Masters' Store was located in Commercial Road, opposite and south of the Victoria Theatre. This photograph is a reasonable copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a building with shopfront, two men standing in front. View past building to a small cottage in background.tarnagulla, commerce, shops, stores, masters, p. masters, funerals, commercial road, main street

Murray Comrie Collection. This photograph is a reasonable copy created from an older original. A black and white negative image depicting workers at a mine at or near Tarnagulla. Mullock/tailings heap behind group.tarnagulla, workers, mining

Murray Comrie Collection. This photograph is a reasonable copy created from an older original. A black and white negative image depicting workers at a mine at or near Tarnagulla. A hose is spraying water at centre of picture. Location unknown. tarnagulla, workers, mining