Blacksmith's vice called a leg vice. It rests on a solid block on the floor and secured on the bench with bolts. The vice was made of wrought iron with hardened steel jaws.rural industry, farm machinery, trades, blacksmithing

A cream coloured cardboard cover with black information on the front. Written in red ink is W.O.2. Perry-Bolt. the booklet is bound with a black material binding.australian military forces, patrolling and tracking, booklet, wo2 perry-bolt

A cream coloured cardboard cover with the information in black and this isformation is inside black lines. On top of the manual in blue ink is the name WO 2 Perry Bolt. service manuals, maintenance, detecting set, mine, portable, metallic model p-158

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower.A Cylinder made of metal and wood 37 centimetres diameter and 21 centimetres high. It has a red, black and white wooden trim on the top and bottom and is held together with six metal clamps. There is a drum head on the top and bottom of the cylinder. Ever Play Extra brand is on the top drum head.Lowe musical instruments, drum, sandhurst drummers

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower. A Cylinder made of chrome plated metal 37 centimetres diameter and 32 centimetres high. There is a drum head on the top and bottom of the cylinder. ARLTON DALLAS-LONDON brand is on the side of the cylinder. It's in a canvas carry bag. On canvas bag - S.N. QUIN B. H. P. D. musical instruments, drum, sandhurst drummers

Fore Plane. Cracked through front of plane, with bolt to hold together. Has large green paint mark and smaller yellow paint marks. Length 19"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fore plane

The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Porthole frame, from the wreck of the Falls of Halladale, porthole and glass missing, brass with screw dog (part broken) and one hinge, eight retaining bolt holes. flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, porthole frame, ship’s fitting, brass porthole, reconditioned porthole, falls of halladale, russell & co., porthole

Hand operated rope making machine with hooks for 5 strands. Mounted on a steel angle bracket bolted to a piece of timber. Handle painted green, remainder unpainted.Nonemachine tool; metalcraft; rope

The Bell was presented to the Mission by the Aberdeen and Commonwealth Line in October 1957, after the ship made her final voyage to Australia in 1956 and it was broken up in Barrow in April 1957 by Thomas W Ward (UK). In the Annual Report 1957, Padre Oliver mentioned "the bell was found unsuited for the chapel belfry, it is to be mounted on a bracket and placed in the Celia Little lounge."Cast brass bell with wrought iron anchor and hook design wall mount: decoratively plaited cord in maritime knot pattern to resemble chain, sealed with a varnish and attached to cast iron clapper. Wrought iron hook secured by metal bolt. Bell is inscribed in upper case capital letters with MORETON BAY. Anchor attached with four flat headed hexagonal bolts with mighted wooden frame. Bell inscribed with upper case capital letters MORETON BAY. / Also brass presentation wall plaque (see image)bell, anchor, brass, ss moreton bay, ship's bell, plaque, celia little room, bracket, p&o, peninsular and oriental steam navigation company, passengers liners, passenger ships, emigrants, emigration

The padlock and key give context to the types of padlocks used to contain prisoners in Victorian Goldfield prisons. The padlock and key are significant because they show a different type of padlock design used at the Old GaolA brass padlock with closed metal hinge. There is slide to hide the keyhole in the front. There is one bolt on the back. The key fits this padlock. It has "J.HUBBALL" and "MELBOURNE" engraved one side. 'J.HUBBALL" and "MELBOURNE"padlock, gaol, prison, prisoner

Murray Robert Shapter donated these lighthouse fittings. He was a local fisherman and employee of the Public Works Lighthouse service for many years in the Queenscliff and Point Lonsdale area.Fittings from two lighthouses in the Queenscliff / Point Lonsdale area. Key to switch sunvalve on or off and an acetylene pilot light burner from the light at the Black Lighthouse in Queenscliff, and a bolt head sheared off the dome of the Point Lonsdale Lighthouse.lighthouse maintenance, fittings

This beret is symbolic to the Royal Australian Electrical and Mechanical Engineers and is held in the highest regard by serving and ex-members of that corp.Saint Eligius was the patron saint the Royal Electrical and Mechanical Engineers and he is best known for being the patron saint of horses which is depicted in the RAEME insignia.Black woolen beret with cotton headband. Attached is a small metal badge, or insignia featuring a golden crown, a ribbon, a lightening bolt and a horse rearing atop a ball and chain.R. A. E. M. E.royal australian electrical + mechanical engineers, raeme corps, uniform, beret, insignia, vietnam war, diamond valley vietnam veterans sub branch

Used by Wandin T SebireA forged steel 'M' toothed crosscut saw with wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.'W' is stamped on the blade.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Model of a pump (water?) and drive shaft for motor showing inlet/outlet valves at top. Used for teaching Arboriculture. Bolted to a metal stand. Painted bright contrasting colours.arboriculture, teaching, pump, drive shaft, motor

This hand operated drill was used to drill holes in the rails so that with fishplates (metal joiners) the rails could be bolted together to form a continuous length.Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Drill Hand Operated Rail Drill made of cast Metalpuffing billy, hand operated rail drill

Brass cigarette lighter inscribed with text and image. Vietnam Cu Chi 68-69 Airborne 3 lightning bolts on a sword in a shield, "I love the fucking army, the army love fucking me", Also image of helicoptercigarette lighter, vietnam

This oak wood sample is part of the wooden barque, the Grange, built in 1840. The wood sample was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The wood sample is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The sample is historically significant as an example of the work and trade of blacksmith. The sample is also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The sample is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard. Wood sample, oak wood fixed between plates and secured by a washer and bolt. There are five layers, each decreasing in size from base to the top. The bottom is a five-sided copper plate, above it is the oak sample that is crumbling and fragile, then a half-disc metal plate, then a square metal washer, then a round metal bolt head. The metal plate has unequal sides, the longest is parallel to the strait side of the half disc. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, wood sample, wooden ship, oak timber, ship fitting

Pittock collection: assorted metal items * brass hose spray, 85 mm L * three corner squares, 35 x 35 x20 mm D * one large steel slide bolt, 202 mm L x 30 mm W * two U-bolt brackets * one drill bit 65 mm L Items stored in Pittock coach builder's box, reference 13000.1.

Leg Vice medium sized metal vice bolted at one side to work bench. Has metal pole practically to ground. Has a device to either tighten or loosen vice.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a tool with a rectangular-shaped metal bar with an upright metal piece at the end of this bar. Attached to the metal bar by two metal bolts is a U-shaped metal lever. This lever is movable. vintage tools, henry phillips, history of warrnambool

Many farming families in the district kept bees as a source of honey for home consumption. This item was made for use on the family farm. Most of the equipment used in the local industry was homemade.During the early to mid 20th century bee keeping was a significant rural industry in Dunkeld and surrounding districts. It is believed that there were nearly twenty apiarists operating in the area. Honey in large quantities was railed to Melbourne for sale.Homemade bee smoker consisting of a copper cylindrical firebox and rectangular bellows constructed of wood and leather. Components are assembled with rivets, scrap wire, sheet metal, nuts and bolts and nails.

1 sheave wood block with iron hook on top. Halves joined by 4 metal bolts. Insect damage to base. Diamond shaped plate over bearing on one side.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, block

'Volley' pinball machine by Gottlieb & Co. In two parts, body with metal legs and upright back section. Bolts attached in bag. Materials: Wood, Metal, Glass, Plastic, Painttennis

Rex Breen is wearing a pale romper suit with a small collar, and socks and sandals. He is standing in front of a rough timber door with a bolt and padlock. A wooden crate is behind him.

Used in ENG1 classroom for engineering subjects prior to degree courses beginning at the college.Differential model of a manual gear shift and clutch for a car or tractor bolted on to a metal base. Used for teaching in Engineering course prior to the Degree programme which commenced in the early 1980sFormeta Baden-Baden. Hawthorn Audio Visual.arboriculture, teaching, motor, gear shift, clutch, agricultural engineering, engineering, model, differential model

"The Story of 547 Signal Troop in South Vietnam 1966 to 1972", by Robert (Bob) Hartley, AM and Barry Hampstead. The manuscript tells the story of the unit, including its establishment, training, deployment, personnel, general life and operations while in Vietnam, the withdrawal, and return to Australia. It contains images, maps, operational information and first hand accounts of soldiers' experiences. This item contributes to an understanding of how Australia's involvement in the war in Vietnam (1962-1975) had a lasting impact on Australian servicemen.2 spiral- bound copies of booklet contains 691 pages of black and white writing, maps and photographs. Front page image is of a kangaroo holding lightning bolt with "Snoopy" in pouch. 547 signal, snoopy, robert hartley, signals, hartley

Wooden sliding ruler used to measure the length of folded bolts of cloth. Ruler is diamond shaped with numbers on the four sides. Sliding arm has numbers on the metal and the arm itself.Putnams Cloth Chart Copyrighted 1898. Patent pending