Showing 362 items
matching dial
-
The Ed Muirhead Physics Museum
Post Office Box
Assembled wood, bakelite and metal (screwed). Metal plate top screwed onto wooden box base, 15 black dials 3.0cm in height. Brass electrical connectors, brass plugs with Bakelite tops. Surface finish: machined. Inscribed on top face along the back edge: “T.E.P.L MELBOURNE [an arrow pointing upwards] 240 1941” Inscribed on top face along the front edge: “EUREKA, BRITISH STANDARD OHMS” Also instructive labels inscribed on top face: “POSITIVE POLE/LINE OR EARTH” “LINE AND GALVANOMETER” “GALVANOMETER” “NEGATIVE POLE AT 15.5OCENT” -
Deaf Children Australia
Sonotone 700 Hearing Aid, Sonotone, 1946
Although Lee DeForest invented the triode vacuum in 1906, it was not employed in hearing aids until 1921. The first hearing aid using a vacuum tube was purported to have been made by Earl C. Hanson. He called his hearing aid the Vactuphone. It used one small peanut tube (below right) to amplify the output of a carbon hearing aid. The Globe Hearing Aid Company and Western Electric collaborated to manufacture the Vactuphone. By the early 1940s, Raytheon had developed miniature vacuum tubes. It was these miniature vacuum tubes that made body-worn hearing aids a reality. Unfortunately, the power requirements of these aids made it necessary to use two relatively large batteries—an "A" battery to power the filaments of the vacuum tubes and a "B" battery to supply the high-voltage for the plate current. The batteries were worn external to the hearing aid itself and the name "Two-piece" hearing aid was used to describe them. Until about 1945 "Two-piece" hearing aids were the norm. However, improved vacuum tube design reduced current requirements. As a result, battery manufacturers were able to reduce the size of the batteries used in hearing aids. At the same time, electronic components were also being miniaturized. This allowed the hearing aid manufacturers to design hearing aids with internal batteries. After 1945, these "One-piece" hearing aids quickly replaced the more cumbersome "Two-piece" hearing aids. With continuing improvements in both batteries and components, hearing aids continued to reduce in size until 1953 when the vacuum tube was suddenly supplanted by the transistor.Fawn plastic hearing aid with metal clip on back and wires leading from the bottom. Made in the USA, sold by Angus & Coote as the Sole Australian Agents. The Model is the Sonotone 700. Two dials one on each of the top corners."ANGUS & COOTE/Sole Australian/Agents/C D C" Printed in black on the back, top left hand corner. "SONOTONE/700/SERIAL NO/843218/MAD IN U.S.A./SEE PATENT NOTICE/IN INSTRUCTION BOOK" imprinted on back, centre middle.deaf children australia, hearing aid, sonotone hearing aid, sonotone 700, angus & coote -
Flagstaff Hill Maritime Museum and Village
Instrument - Sphygmomanometer, Riester, 1948 -1969
This blood pressure monitor (sphygmomanometer) belonged to Dr William Roy Angus, surgeon and oculist. It was donated to Flagstaff Hill Maritime Village by his daughter, Berry McDade in January 2015. . It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. The approximate manufacture date of the blood pressure monitor coincides with the time when Doctor William Roy Angus had his practice in Warrnambool. The company Short & Mason Ltd. London used the brand name TYCOS between 1907-1969 and Rudolf Riester (the brand on the cuff) formed the company ‘Riester” in Germany in 1948, where he developed and produced the first mercury blood pressure monitors. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station.). Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne. In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community. He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool.. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Sphygmomanometer (blood pressure meter), from the collection of W.R. Angus. Brand TYCOS by Short & Mason Ltd, London. The case is of black leather with press-stud closure, lined in brown leather with gilded maker's embossing inside lid. The meter has a grey fabric cuff attached to two black rubber tubes, one tube has a pump bulb on a short brown extension tube on the end, the other has a round meter with glass covered dial on the end. Dial registers 20 – 300. There are maker's details on both meter and box."Patent 9535. No. 39370". Gold maker's stamp " "TYCOS" "SPHYGMOMANOMETER / SHORT & MASON LTD. LONDON / company’s logo”. Cloth label sewn on cuff "GERMANY / RIESTER"flagstaff hill, flagstaff hill warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sphygmomanometer, chemist equipment, dr w.r. angus, medical instrument, warrnambool base hospital, medical treatment, medical history -
Warrnambool and District Historical Society Inc.
Camera, Pentax Asahi Spotmatic, 1964-1976
The Pentax Asahi Spotmatic camera is an SLR camera and was manufactured around 1960. An example of an early SLR camera.Black body with silver metal top . Three circular dials on the top with silver shutter button and winder. Base is silver with opening for battery. It has a screw on lens with lens cap . It has a thin plastic neck strap. It is quite a heavy Pentax Asahi on front near the lens . Spotmatic on front below shutter on the back Asahi OPT Co Japan.on top left 3588316 SPpentax asahi, pentax spotmatic, warrnambool history -
Clunes Museum
DOCTORS HEAD LIGHT & BATTERY SET, CHENEY?
USED IN THE CLUNES HOSPITALHEAD LIGHT. PLASTIC HEAD-BAND WITH ADJUSTABLE SETTING FOR LIGHT GLOBE & REFLECTOR BATTERY SET : WOODEN BOX WHICH HOUSED 3 BATTERIES. A DIAL ON THE TOP OF THE BOX (Min to Max) & TWO SCREW TERMINALS. METAL HINGES & CLASPCHENEY ENGLAND ON BOXlocal history, medical & surgery, medical -
Kiewa Valley Historical Society
Iron Box - Steam or Dry, Model No
The Kiewa Hydro Electric Scheme (KHES) produced electricity for the people living in the Kiewa Valley and beyond to many parts of Victoria. The people and their families working on the scheme were encouraged by their employer the State Electricity Commission of Victoria to purchase and use electrical appliances. The iron was popular as it was quick and easy compared to those used previously. This iron belonged to Ron White who was a senior member of staff during the construction and operation of the KHES.This iron was owned by Ron White who was appointed Area Operations Engineer Kiewa in June 1956. He was later appointed General Superintendent and then, in 1974, he was appointed Principal Hydro Engineer of the recently titled Hydro Division.Rectangular yellow and black cardboard box with 'complete' fitting lid. Red and black writing on all sides except the bottom. staples used to hold down the sides of the lid.Front of box - New Revolutionary / Dry/ It steam irons/ it damps as it irons!/ It dry irons too! Back of box - Hoover Steam or Dry Iron Side of box - New Revolutionary / Hoover/ Steam or dry/ Iron / Made By/ Hoover Industries Pty Ltd Meadowbank NSW Top of box has sketch of dial "Big Safety Set Dial" - with black backgroundelectric iron; steam iron; hoover industries; ron white; laundry; kiewa hydro electric scheme -
Queenscliffe Maritime Museum
Tool - Navigation, ship's Log, 25 May 2011
A Ship's Log looked very similar to a torpedo but was used to measure the speed of a ship. When dragged behind the vessel, movement of water past the propeller caused it to rotate, turning the small needle dials to record the distance and speed travelled. https://museumsvictoria.com.au/immigrationmuseum/resources/journeys-to-australia/Ship's Log Display HeadWalkers Cherub 111 ships lognavigation, speed, knot, chip log, log, thomas walker and son -
Bendigo Military Museum
Equipment - WIRELESS SET 1944, 1944
This is a 6 valve portable transceiver, made in Australia from a British design. It was only used for C.W. (morse code). Its frequency was in the range of 2.5-3.5MHz. Output power 0.5-5 watts. Use was for commando and infantry patrols up to battalion level. It had an external battery pack for low and high voltage supply. 1 man operation in Tropics. An image of this type of wireless set in operation can be found in the AWM Collection: P02952.012 081815 Aluminium box, cover missing. The top has various dials, jacks and one gauge. There is a small length of cable coming from the control panel to a 4 pin plug. On the outside of case is the phrase D (arrow up)D 208 MKIIPlaque on control panel "WIRELESS SET - ZAA 2088 SERIAL NUMBER 168 DATE = 1944"wireless, wwii -
The Ed Muirhead Physics Museum
Photograph, Optical Munitions, Dial Sight View
Part of a series entitled “Optical Munitions - School of Natural Philosophy, 1942-1945”. Black and white photo showing telescopic view of landscape through ocular of a dial sight. Image is coincident with graticule with horizontal and vertical scales. (see worksheet for diagram).In ink on lower left hand corner : “35”. -
Bendigo Historical Society Inc.
Domestic Object - ALARM CLOCK
Westclox Sleep-Meter alarm clock, chrome plated case, paper dial with black numerals and black hands, glass front.Patented Oct 28 1902 May 15 1906 Dec 15 1908 Sept 23 1913 Patents Pdg.Made by Western Clock Co La Salle Ill USAhorology, clocks, alarm -
Bendigo Military Museum
Equipment - PERISCOPE, TANK, C.1942
Believed to have come from a Sherman Tank, c. WWII.Main frame is rectangular, painted jungle green. Bottom viewer is metal with glass window. Top viewer is made of bakelite with glass window. On the rear viewer side are 2 dials and a brass ?? that adjust elevation and deflection. The rear panel has a large ?? knob.The side has a plaque "PERISCOPE M4 - MINNEAPOLIS - HONEYWELL REGULATOR COMPANY. No 54340 1942 USA"wwii, sherman tank, periscope -
Bendigo Military Museum
Equipment - GENERATOR/TACOMETER UNITS, C.WW2
Item belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No 1959 for his service records..1) Unt is black metal, cylinder shape with hexagonal section fitted with 6 bolts cylinder section also has a shaft on the rear that turns. .2) Unit is metal with dial numbering from 0 to 45 rpm Rear has electrical connections.1) “Generator Tachometer Ser no 7169” .2) “Indicator Tachometer E73”electrical technology, instruments, raaf -
Cheese World Museum
Scales, Persinware, Post Office scales
These scales were used in the post office which was located at Warrnambool Cheese & Butter Factory.Red Post Office wedge-shaped scales with rectangular base and spring-loaded top plate; white dial face marked to 16oz by 1/8 oz increments. Marked Domestic Use Only. Manufacturer's details marked in gold on the front of the scales.No.63 (on base) POST OFFICE/Persinware/Made in Australiaallansford, warrnambool cheese & butter factory, wcb, post offices, scales, weighing instruments -
The Ed Muirhead Physics Museum
Photograph, Optical Munitions, with R.D. Hill & H.A. Waters
Part of a series entitled “Optical Munitions - School of Natural Philosophy, 1942-1945”. Black and white photo of R.D. Hill and H.A. Waters assembing/operating dial sight (same equipment as held by T.H. Laby in no 122.3/273 in Vol. 1/2)In ink on lower left hand corner : “34”. -
Federation University Historical Collection
Equipment - Electrical Instrument, Moore Reed "Universal" Acoustic Coupler: Type TC301, c1980
The Universal Acoustic Coupler was made and would have been used to connect a telephone to dial a computer remotely. The control panel is under the wooden flap. There is a power switch, full duplex switch, 500 Ma Fuse, CCITT Port. When not in use it can be folded up into a small timber carry case with handle.Wooden box with two sections that open. Top section hinged and folds back. inside are controls and cables for connecting to a computer. Instructions for use are on the lid. Front section has clips and folds down to a phone to placed in "speakers". English maker's plate and Melbourne supplier's plate with A.P.O. Permit No. C74/8/903 Serial No. 775326 moore reed, universal acoustic coupler, telephone, remote connection, computer connection -
Frankston RSL Sub Branch
Dial Sight
Dial sight used with QF 25 pdr field gun. This delicate device was mounted on a fitting beside the barrel of the gun and used to accurately aim the weapon when firing. This device has an eyepiece and has a circular, rotatable scale ring which is graduated in degrees.ww2, dial sight, sight, 25 pdr, qf 25 pdr, 25 pounder, field gun -
Federation University Historical Collection
Equipment - Galvonometer, 1930 (estimated)
Galvanometers are an instrument used for detecting and measuring electric current. They had a magnetic needle moved by the magnetic field produced by coils carrying the current to be measured, and the earth's field had to be taken into consideration. They were used to detect current in either direction in telegraphy systems, and to test equipment.Post Office Galvonometer. A hinged polished timber case with three brass terminals at the top, and ring (handle) and a dial (0 to 70) with an indictor needle. The opened box reveals wires leading to the terminals with two compartments covered in blue woven material (possibly silk).telegraph works, galvonometer, scientific instruments -
Bendigo Historical Society Inc.
Book - INTERIM TELEPHONE DIRECTOR: BENDIGO, MAY 1959
INTERIM TELEPHONE DIRECTORY, BENDIGO, MAY 1959 Paper booklet containing New telephone numbers and amended dialling codes for Bendigo, Eaglehawk, Epsom, Junortoun, Kangaroo Falt, Maiden Gully and Spring Gully. A Commonwealth of Australia production with Coat of Arms on front page.book, bendigo, bendigo history & its people -
Whitehorse Historical Society Inc.
Functional object - Iron - Hoover Steam, C. 1960
'Hoover' Steam and Dry Iron made in Great Britain.|Bakelite handle with circular dial beneath, stating heat degrees. Chrome body and stainless steel sole where the steam is ejected. On top of the bakelite handle is an on/off button in the area where the water is put in.Hooves Steam and Dry - 240V 1000W|Model 0114 R40979domestic items, irons -
Parks Victoria - Port Campbell Rocket Shed
Rocket launcher
Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Metal, brass and timber tripod structure with a channel or trough to support the rocket. It has a pendulum and dial to measure the height trajectory. Very long wooden box with hinged lid painted a green-grey colour with four brass hinges and two rusted metal hooks. -
Kiewa Valley Historical Society
Meter Multi General Purpose, circa mid to late 1900's
This general purpose Multi-meter was manufactured after 1950 and used by the SEC Vic (Kiewa Hydro Electricity Scheme) from that date until late 1900's. It was used to measure very small voltages associated with the operation of the various Hydro Generators. The readings were able to be shown by the resistor in use in the current circuit. During this time period, high quality testing instruments were either sourced from Europe or England. This particular meter was manufactured in the Netherlands. This type of "old" analogue meter was replaced by digital meters whose electronic components are a fraction of the size of the older analogue ones.This analog General Purpose multi-meter is quite a large (for handheld mobile) apparatus which permits the easy monitoring of electrical variations within the large SEC Victoria Hydro Scheme's electrical generators. These generators are powered by the hydro force of "stored" water at a higher altitude. The establishment of both the NSW and Victorian Hydro schemes was achieved from the mid 1900's to the 1960's. At this point in time the need for additional power sources to quench both an industrial and domestic demand for electricity was purely an economic and not and environmental (carbon reduction) factor. This hydro scheme was instigated by "the Government of the day" as a bold move and was the major force of the World War II refugee and "technical" workforce inclusion of skilled and unskilled migration into the Australian environment. Although this mass "invasion" of workers with families was thought of in some circles as intrusive, the expansion of population post war years and its integration into the Australian rural sector, produced the multi- lingual multi-cultural diversity of later years.This General Purpose Multimeter is an analogue meter i.e. it has a needle arm that moves across a scale of divisions. This is a large(hand held) device due to the mechanical movement system within and the large size of its electronic components of its circuitry.There are two black bake-lite push buttons operating the wire inserts Positive/negative leads at the top. The meter (protected with a glass window) has clearly marked graduations (top - volts, bottom amperes). Below this are two bake-lite dials (left "potentiometer the right one measuring range selector). Below this is a "dial" switch to input the desired resistance measuring range "V" Front "H&B ELIMA" and to the right Elavi 15n. 0n the front side is a label "STATE ELECTRICITY COMMISSION OF VICTORIA TRANSMISSION DEPT E.C.No." On the bottom of the base is a stenciled layout of the battery "layout" including the fuse . The information notice is presented in five languages starting with German, English,French, Italian, Spanish and Dutchsec vic kiewa hydro scheme, alternate energy supplies, alpine population growth -
Warrnambool and District Historical Society Inc.
Radio, Philips, Amateur radio set, 1920s
Edward ( Ted) Salamy (1903-1977) succeeded his father in business in Warrnambool as a jeweller and was at 179 Liebig Street when he retired in the 1960s. On 1st December in 1924 he obtained an amateur radio licence ( Call sign A3AJ). This was the 35th licence issued in the State of Victoria and the first in Warrnambool. The original licence cost two shillings and sixpence. Amateur radio, still a popular hobby today, was particularly important in the 1920s when few people had radios of any sort and there were no provincial radio stations. People were able to access amateur radio sets to listen to such broadcast as overseas cricket matches. This amateur radio set is of considerable historical importance as it belonged to Ted Salamy, credited with being the first to operate an amateur radio station in Warrnambool.This is a rectangular box containing five valves, a radio frequency mechanism and three coils with fine copper winding. The mechanisms are connected by wires and metal screws. The box has a raised black -composite material front which has a voltage meter, three switches or knobs and a tuning dial. Philips made in Holland British Made (voltage meter)amateur ham radio warrnambool -
Bendigo Military Museum
Equipment - COMPASS
This compass was confiscated from a Japanese soldier, when the Japanese surrendered to the British in Hong Kong, September 1945. It was acquired by Squadron Leader Victor James RAF, stationed in Hong Kong and New Territories Refer Cat No 5084P.Small circular compass of 25mm diameter. It has a black dial. A simple double ended arrow indicates bearing, arrow also has glow in the dark material on end. It has a small black leather strap and buckle. The top outer circumference is divided into segments with Japanese symbols.japanese, wwii, raf, hong kong -
Bendigo Historical Society Inc.
Accessory - 2 LADIES WRIST WATCHES
2 Ladies wrist watches, 1 with black leather band circular white face with luminous numbers and hands, separate seconds dial, marked Election Swiss made. The other smaller with no band, white circular face with black numerals and red 12 and wavy pattern on case.Swiss made 0935 84 116361 2horology, watches -
Wodonga & District Historical Society Inc
Functional object - Ericsson Auto Flameproof Telephone from the Golden Fleece Depot, Wodonga, c. late 1930s
This British made type "N1087" and code "N1087" C Ericsson auto flameproof telephone was used in the drum filling platform of the Golden Fleece Depot, in Hovell St., Wodonga. The type "N1087" and code "N1087" C Ericsson flameproof telephone was introduced in 1937 and certified by the British Mines Department as flameproof for Petroleum and Acetone Vapours, in 1938. It was designed specifically for outdoor use in areas where there may be exposure to inflammable vapours and hazardous chemicals such as petroleum. Each contact or switch point is enclosed in its own flameproof chamber, to reduce the risk of ignition and the volume of gas.The Ericsson auto flameproof telephone has local significance due to its use in the Golden Fleece Depot in Wodonga, as well as national and international significance due to its date and the rarity and relatively complete condition.Black Ericsson auto flameproof rotary dial telephone secured in a hinged cast iron case painted black. Rubber tubing connected to the bakelite handset and an adjacent metal plate with the name "Ericsson", type "N1087" and code "N1087 C", and certification of the telephone as flameproof with the letters FLP. "Ericsson" on the top left corner of the metal plate. "AUTO TELEPHONE / TYPE N1087 / CERTIFIED FLAMEPROOF / FOR GROUPS II & III / CERTIFICATE FLP. 2378" / CODE N1087 C" on the main part of the metal plate.ericsson telephones, british telephones, flameproof telephones, mining telephones, golden fleece depot wodonga, wodonga -
Kiewa Valley Historical Society
Switchboard - S.E.C.V
The switchboard was located in the office of the switchyard. This switchboard was used by the State Electricity Commission of Victoria on the Kiewa Hydro Electric Scheme in Mt Beauty. Employees living in the towns and in the Kiewa Valley who had telephones were connected to the switchboard and were able to speak after dialling a number and then being connected by an operator working at the switchboard. This connection pre dated automatic connections. This switchboard was used by the S.E.C.V. for their employees on the Kiewa Hydro Electric Scheme and is an example of communications used in the 1940s and 1950s using telephones and operators prior to automatic 'stations'. To prevent operators from listening to conversations, a tone was introduced so that those on the phone became aware of someone listening in to their conversation.switchboard. mt beauty. state electricity commission of victoria. kiewa hydro electric scheme. telephones. communication. -
Federation University Historical Collection
Artwork, other - Artwork - Decals, ZILLES COLLECTION: Decal stencils for Car Dashboard Dials
Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. Images of dacals for instrument dials for dashboards - petrol, water, air, speedometer, oil, amperes,Transparencies and printed copies of decalsModel makes and implement nameszilles printers, decals, instrument dials, ballarat -
Federation University Historical Collection
Plans, Ballarat College of Advanced Education Building Plans, 1972, 10/1972
Ballarat College of Advanced Education (BCAE) is a predecessor institution of Federation University.Four plans and one set of specifictions for the electrical services for the Ballarat College of Advanced Education Eletrical Engineering Building (E Building) at Mount Helen Campus. It includes lecture theatre control dials, M.V. systems diagram, lighting and thermal alarm layouts and lighting and power workshop details. electrical engineering, plans, ballarat college of advanced education, irwin, johnston, mcguibess & simpson, architectural plans -
Bendigo Historical Society Inc.
Functional object - BLACK SLATE MANTLE CLOCK
Small black slate and marble mantle clock with single train movement,pendelum, round white enamel dial with black numerals and hands, brass bezel with bevel edged glass, case of black slate with red marble decoration on front. Donated by Mrs A. Gill, Somerville Street, Bendigo.on movement E793 46horology, clocks, mantle -
Deaf Children Australia
Hearing Aid, British Hearing Aids (Aust) P/L, Transitone & Universal Hearing Aid, Estimated: 1954
The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Hearing aid with Pink and silver metal pack with attached wire to ear piece. Uses (A) battery. Ear piece moulded for wearer with dials for adjustments. In original box. Transitone and Universal Hearing Aids were manufactured by British Hearing Aids (Aust) P/L. Model 61T. NoV848 "TRANSITONE & UNIVERSAL/HEARING AIDS/BRITISH HEARING AIDS (AUST) P/L" printed on fabric inside lid of box. Inside battery compartment, label "MODEL 61T" ('T' handwritten) "V848" inscribed on hinge.