Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Photo of MMTB Maximum Traction Car No. 37 loaded onto a Yellow Express truck leaving Preston workshops with the "hump" behind the tram. Tram has the war time stripes, no trolley pole and no destination boxes. One of the bogies is loaded on the goose neck of the truck. Tram became Geelong No. 38. Photo taken 15/5/1951 by Keith Kings. On rear in blue ink "Melbourne M&MTB "C-37 on Yellow Express low-loading semi trailer truck, leaving Preston Workshops for Geelong, after sale to the SEC. Became Geelong No. 38. (15.5.51). In the top left hand corner is the Keith Kings copyright stamp with the number "E(t)(v)" written in.trams, tramways, geelong, preston workshops, maximum traction, bogie trams, corio terrace, tram 37, tram 38

By 1960/61 all the factors operating against a narrow gauge railway were in place for the Colac-Beech Forest line. As well as using a 2-6-2 Tank engine over 60 years old, 14A, the train by this stage only had a louvre van, two NQ trucks and a guard's van to bring to Colac. It was very near the end.Locomotive 14A and a mixed goods trucks taking water at 10 mile tank in c.1960=61. The driver controlling the water is W. Brady while the fireman, Les Ogden, peers into the smoke box. B/W.colac; beech forest; ten mile creek; locomotive 14a; w. brady; l. ogden; railway;

Yields information about Ballarat's trams during 1964 and Wendouree Parade.Kodachrome cardboard mount, colour slide of No. 39 travelling south in Wendouree Parade, fairly land. Tram has the destination of Gardens via Drummond St North."Ballarat Single truck 32 2-4-64" in ink.tramways, trams, gardens loop, wendouree parade, tram stops, tram 39

Yields information about Ballarat's trams during 1964 and the Gardens tram stop.Kodachrome cardboard mount, colour slide of No. 32 at the Gardens Loop. Tram has adverts for Electric cooking, Castrol oil, dancing at the Civic Hall and Twin Lakes. Dated 2-4-1964. Tram stop alongside the tram shows all the signs that were provided at this location."Ballarat Single truck 32 2-4-64" in ink.tramways, trams, gardens loop, wendouree parade, tram stops, tram 32

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 26 NQR - Open Medium Truck (11) 10/12/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 VR Service History *NQR 26.VA - 10/12/1898 NWS Built new - / /1926 - To NQ 26.VA - NQ 26.VA - 24/10/1936 NWS Into Workshops - 7/12/1936 NWS Out of Workshops (45 days) /10/1954 - Sold (to) - Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck26 NQR - narrow gauge Open Medium Truck made of Steel and metal26 NQRpuffing billy railway, pbr, rolling stock , 26 nqr - open medium truck, victorian railways, narrow gauge rolling stock, nqr wagon, 26 nqr, nqr open medium truck

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 29 NQR - Open Medium Truck with drop ends VR Service History 15/12/1898 NWS Built new *NQR 29.VA - 15/12/1898 NWS Built new - / /1926 - To NQ 29.VA - NQ 29.VA - /10/1954 - Sold (to) - Puffing Billy Service History or Notes July 2016 - LiftedHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends29 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal 29NQRpuffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon

8/13 VMR was issued Humber trucks in Armoured Personnel Carrier role., The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Two black and white photographs of Hunber 1 ton trucks taken during 8/13 Victorian Mounted Rifles training at Puckapunyal , c 1964." 2 Tp Puckapunyal Humber 1 Ton used as APCs

Set of four documents: - letter from W R Dann Traffic Manager of the Brisbane City Council Transport Department to Les Denmead, Tramway Supertindent Ballarat dated 6/2/1956, enclosing two prints of Brisbane Tramway Drop Centre bogie trams, long wheelbase reversed Maximum Traction truck, and Accident Report Form No. 1 of 8/54. Possibly the letter resulted from a meeting at a tramway conference.Yields information about Brisbane drop centre tramcars and accident report forms.Set of four documents - typed cover letter and other printed sheets.tramcars, accidents, forms, brisbane, drop centre trams, trucks

A diorama of US Army Gun M35A1 Quad 50 Gun Truck. The truck with Quad 50mm guns mounted on truck bed. There is a soldier standing near the front of the truck. US Army jeep alongside.There are two patches of grass on the diorama.Nancy in yellow, red and yellow ball logo, US white star.diorama, gun truck, jeep

8/13 VMR was issued with Humber 1 Ton truck to train in an Armoured Personnel Carrier role.The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Black and white photograph of Humber 1 Ton truck ready to depart Buna Barracks Albury on weekend manoeuvres. In foreground is Troop Sergeant Lou Madjeric." 2 Tp ready to move.'

This item shows the excavation of the side of a railway track using a pneumatic shovel and a rail mounted truck by two workmen. The period covered was well before State Health and Safety requirements, such as helmets, became law. It also details that the workmen were from European heritage as their head coverings were a handkerchief knotted at each corner. This was typical for workmen of this heritage, others used caps or hats or no head covering at all (the macho male look)The photograph of this item was one of many depicting great achievements and opening up the region. A visual link or time capsule of the 1950s rural/mining sectors clashing with the established rural industriesThis photo depicts the time (1950's) and place (Bogong and Mount Beauty) where construction workers had an immense impact, not only on the physical environment but also on the social and economic development of the Victorian Alps region. The fast expansion of smaller settlements brought about increased pressures on the welfare viability of certain subgroups within the region e.g. farming, droving and commerce (caravan hawkers versus static shops). These changes brought about a heightened awareness by both local and State Governments to upgrade not only facilities within the region but also access to the region. Black and white photo of two workmen on a rail mounted shovel truck. The photo is of good definition allowing a clear view of the subject matter. The paper is semi gloss.On the back of the photo, paper suppliers etchings are "Kodak XtraLife II paper"mining, hydro electricity, victorian alps, construction camps, earth moving machines

Shows an accident between a Pengelly tram and an AEC solid tyre truck, possibly carrying sacks of coal. Reg Item 8321 shows an accident damaged tram of the same type - tram 22Provides information on the consequences of an accident between a larger heavy truck and a Pengelly tram on 9-2-1927.Mounted Black and White photograph mounted on a grey cardboard, embossed with lines and a decorative pattern of a Geelong Pengelly type tram in collision with an AEC solid tyre truck carrying bagged materials, possibly coal. Has a photographic studio stamp in the bottom right hand corner "C. V. El??". 2nd copy held - on a black plastic copy format.In pencil written under the print "9-2-27 Wed 4.10pm c/o Yarra & Ryrie Sts car going east".geelong, accidents, tram 22, ryrie st, aec trucks, tramways, trams

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 21 NQR - Open Medium Truck with drop ends VR Service History 26/11/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 *NQR 21.VA - 26/11/1898 NWS Built new - / /1926 - To NQ 21.VA - NQ 21.VA - 17/ 9/1936 NWS Into Workshops - 29/ 4/1937 NWS Out of Workshops (50 days) Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - Open medium truck with seats (No. 21)21 NQR - Open Medium Truck converted to Excursion Car with seats made of Steel and metal21 NQRpuffing billy railway, pbr, rolling stock , 21 nqr, victorian railways, nqr open medium truck with seats

front end loader and tip truck removing crest of Myer Street prior to relevelling and sealing Lakes Entrance Victoria. 7 other colour photographs showing works in progress levelling crest of Myer Street numbers 04298.1, .2, .3, .4 .5, .6 size 10 x 15 cmColour photograph showing front end loader and tip truck removing crest of Myer Street prior to relevelling and sealing Lakes Entrance Victoria c1980. plus 7 other colour photographs showing works in progress levelling crest of Myer Street numbers parks, roads and streets, civil engineering

Black and White photograph of a Brill 21E type, used on four wheel trams. Note the motor suspension spring is not located in the original position provided for on the truck. One of a series of photographs done by the MMTB to illustrate the various types of bogies used by the MMTB. Possibly during the 1960's.trams, tramways, mmtb, brill trucks, brill 21e, bogies, trucks, preston workshops

Colour Slide: a Man Gettin in a Grey Truck, Truck has Yellow tank Behind cabin.lake belfield

Humber 1 ton trucks were a short term replacement for ageing White Scout Cars.The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Black and white photograph of three soldiers of 8/13 Victorian Mounted Rifles with two Humber 1 ton trucks . facing camera is Trooper Bill Cameron.

humber 1 ton trucks were a good substitute for armoured personnel carriers and enabled training in the APC role.The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Three black and white photographs of Humber 1 ton trucks of 8/13 Victorian Mounted Rifles with camouflage covering during exercises at Puckapunyal c. 1964

Yields information about Australian transport history, transport at the time of publication and the development of buses and the Ansett organisation.Large format 208 page , July 1948 issue of Truck and Bus Transportation with colour cover, fold out and advertisements, colour printing, articles on buses, trucks, cable trams, Australian Transport, personnel in industry, Ansett, executives - special 12 the anniversary issue. See photocopy of title and contents pages with item notes. Notes on Truck & Bus Transportation - Special Anniversary Issue - July 1948, with particular relevance to BTM Archives Advertisements: White Bus Co - similarity to the US PCC Tram - inside front cover Ansett's and Ansair - p131 AC buses - p162 Articles: Has Australia's Railways Reach the Doldrums? - p38 Modem Street Transit Authorities Announce Development Policy - p42 (includes photos of Sydney, Adelaide Glenelg H class, Bourke St, trams etc, being replaced by buses) These were the Events that made our Headlines (war years - photos included - p61 Riding the Rattlers behind Horses, Ropes and Billies - cable trams, horse and steam trams p66. - demise of Melbourne cable cars. Tracing the development of the Motor Bus in Aust. - p73. Australian Transport Administrations - whose , photos, responsibilities, liquid fuel control (petrol rationing), Australian Road Transport Associations, executives etc. - pl16 onwards Ansett organisation - p 1 72 onwards trams, tramways, trucks, buses, cable trams, road transport

Black and White photograph of a Brill 22 E type, used on maximum traction bogie trams. One of a series of photographs done by the MMTB to illustrate the various types of bogies / trucks used by the MMTB. Possibly during the 1960's. Two copies held.trams, tramways, mmtb, brill trucks, brill 22e, bogies, trucks, preston workshops, maximum traction

C.M Jones trucklocal identities

This photo was most likely taken at the site of the proposed McKay Creek Power Station. Excavation of this site was commenced in 1951 but an access road (a rough, narrow track) was put it in 1948 and widened in 1954. The State Electricity Commission would have milled logs from this area at their mill at Howman's Gap. The timber was used for building of housing and camps and provided a much needed resource as there was a general shortage of this commodity. The power station was relocated underground owing to repeated problems with landslides in the area. Restricted financial resources and the repositioning of the power station retarded construction activities and it was not completed until early 1961. An historical pictorial record of the type of machinery used in the 1950's - logging truck with bogie attached, the bull dozer and winch for hauling logs to the truck and note the lack of protective clothing!Black and white photograph showing a logging truck, bogie and bull dozer with winch for hauling the logs to the truck. Two men are on the truck, a driver on the bull dozer and a large log on the bogie. Hand written on the back of photo "Logging at McKay Creek".logging, mckay creek, timber, machinery

Written on back of photograph, "E652. N14!. 15/1/82. Truck clearing portion of Billy Guyatts building to make way for new road to be seen above and front of truck".

WWII historical significanceBlack and White photograph of Japanese and Australian troops from WWII. L to R, American born interpreter, O.C. Japanese Force - Capt. Koreda, Lt. Caren Reid. Lt. Caren Reid gives instructions reference searching his troops through the interpreter.12 Sept 1945. 0900 approx. 300 Japanese arrive in trucks.

1. Picture of soldiers in trucks in outback - homeward bound from Darwin 8/11/45. 2. Graves of first victims of an air raid in Darwin - Berrimah Cemetery. 3. Ship "Oranjes" returning POW's in 1945 to Australia. 4. VP Day 15/8/45 Crowd of soldiers celebrating 4 RSV.Four photos all originals and black & white. 1. Faded photo of trucks in outback. 2. B & W photo original War graves. 3. B & W photo original POW ship. 4. B & W photo original, celebrating VP Day 1. On back "Homeward Bound from Darwin 8 /11/45". 2. On back "Graves of first Victims of Air Raids Darwin". 3. On back " POW's "Oranjes" Darwin 1945. 4. On back "VP Day 15/8/45, 4RSV & description of Celebration.vp day, darwin, pow's, war graves

Memento or Pen and Ink stand featuring a model of the Peckham Pendulum axle box. Made from wood and brass with space for pens and ink bottles, titled "The Peckham truck and Engineering Company Ltd London". Features a model of the Peckham axle box with rotated within the frame. See https://www.tramwayinfo.com/Tramframe.htm?https://www.tramwayinfo.com/Models/Howto/Trucks.htm accessed 7/7/2020 for some details.trams, tramways, trucks, peckham, models, souvenirs

Doug SMALLPAGE worked for C.O.R. and did all of their photography. These originals were donated by his daughter, Ann SMALLPAGE.From a set of seven original photographs taken by Doug SMALLPAGE of C.O.R. trucks in the 1950s: Bedford trucktransport - motor vehicles, industry, business and traders, bp australia, cor, doug smallpage, commonwealth oil refineries

Doug SMALLPAGE worked for C.O.R. and did all of their photography. These originals were donated by his daughter, Ann SMALLPAGE.From a set of seven original photographs taken by Doug SMALLPAGE of C.O.R. trucks in the 1950s: Bedford trucktransport - motor vehicles, industry, business and traders, bp australia, cor, doug smallpage, commonwealth oil refineries

Doug SMALLPAGE worked for C.O.R. and did all of their photography. These originals were donated by his daughter, Ann SMALLPAGE.From a set of seven original photographs taken by Doug SMALLPAGE of C.O.R. trucks in the 1950s: Bedford trucktransport - motor vehicles, industry, business and traders, bp australia, cor, doug smallpage, commonwealth oil refineries

Doug SMALLPAGE worked for C.O.R. and did all of their photography. These originals were donated by his daughter, Ann SMALLPAGE.From a set of seven original photographs taken by Doug SMALLPAGE of C.O.R. trucks in the 1950s: Austin trucktransport - motor vehicles, industry, business and traders, bp australia, cor, doug smallpage, commonwealth oil refineries