1 sheave metal block with external strap and link ring. Block has holes in side. Large bolt through middle with split pin.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, metal block, block

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oak with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck, The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Copper Hinge-plate (broken) from the wreck of the Schomberg, 3 bolt holes. L 1' x 6½" x 5" x ¾" thickflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, copper hinge-plate, copper plate

Step wooden with brass foot plate screwed by 4 brass screws step secured by 2 bolts. 610mmL x 135mmW x 70mmD.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

8466.1 - Truncated cone roller with concave side attached by central pivot to rectangular metal plate which has bolt holes in each corner.

Wooden shield with silver horse with chain from nect to a globe of the world on a gold lightning bolt. there is a crown on top, the letters "RAEME" and "vietnam" in goldRAEME Vietnamplaque, r.a.e.m.e.

Part of bullock harness. Wooden yoke with 4 holes for the bows, and 3 for the centre metal ring supported by a metal plate bolted into the wooden yoke.

Trapezoidal shape, narrower at the top. Folded sheet metal housing with attached handle. The clapper is a folded strip of metal attached to a wire hanger, by a bolt.

Model of an electric pump (No. 7121-4511 Type U21) and Asahi flow meter bolted on to a wooden block. Electric cord. Used for teaching Arboriculture.Oklahoma City, Okla. Little Giant Pump Company U.S. Patent No. 3411450 Clipsal (electric cord.) Asahi Water Meterarboriculture, motor, teaching, ahahi meter, little giant pump company, flow meter

Used to drive the belt for machines.A long shaft with five wheels of varying height attached to it. The largest wheel has six spokes, the second to last in size has five curved spokes. One wheel is made of hard rubber. The shaft extends beyond the largest wheel, where it has a big bolt. The shaft extends an inch or two beyond the wheel at the other end. All wheels are bolted on.

All Things Safety Wear sell products including Safety products, Workwear, Screenprinting, Embroidery and Bolts & nutsBusiness card printed both sides in black and yellow; with adhesive sticker printed in black and yellow, one sidesafety products, sherbourne road briar hill

Belonged to David Andrew No 400247 RAAF, KIA 5.4.43. Refer 2084, 2085, 2091.Badge, metal, small black crown and small black bird wings outstretched. Both affixed to a metal plate via 3 small bolts with nuts.badges, military, raaf

This is a peephole from a solitary confinement cell cell at Port Arthur. There were 12 cells, measuring 3m x 1.5m, used for solitary confinement. Convicts there would sleep on a narrow wooden shelf, the only furnishing in the cell, and were watched through a peephole in the cell door.A rectangular iron peephole from a prison door. it has a bolted metal flap that can be pushed aside to allow an outside person a view of the inside of the cell.peephole port- arthur convict

John Heath tool boxRip saw blade 670mmL. Has F H in black on blade. Wood brown painted handle with 3 holes & 2 bolts holding handle on. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand brace - 'U' shaped with split end to take a tapered end drill. Drill is secured by a bolt to tighten split end. Metal breast plate.trades, carpentry, tools

Blacksmith's vice called a leg vice. It rests on a solid block on the floor and secured on the bench with bolts. The vice was made of wrought iron with hardened steel jaws.rural industry, farm machinery, trades, blacksmithing

A cream coloured cardboard cover with black information on the front. Written in red ink is W.O.2. Perry-Bolt. the booklet is bound with a black material binding.australian military forces, patrolling and tracking, booklet, wo2 perry-bolt

A cream coloured cardboard cover with the information in black and this isformation is inside black lines. On top of the manual in blue ink is the name WO 2 Perry Bolt. service manuals, maintenance, detecting set, mine, portable, metallic model p-158

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower.A Cylinder made of metal and wood 37 centimetres diameter and 21 centimetres high. It has a red, black and white wooden trim on the top and bottom and is held together with six metal clamps. There is a drum head on the top and bottom of the cylinder. Ever Play Extra brand is on the top drum head.Lowe musical instruments, drum, sandhurst drummers

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower. A Cylinder made of chrome plated metal 37 centimetres diameter and 32 centimetres high. There is a drum head on the top and bottom of the cylinder. ARLTON DALLAS-LONDON brand is on the side of the cylinder. It's in a canvas carry bag. On canvas bag - S.N. QUIN B. H. P. D. musical instruments, drum, sandhurst drummers

Fore Plane. Cracked through front of plane, with bolt to hold together. Has large green paint mark and smaller yellow paint marks. Length 19"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fore plane

The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Porthole frame, from the wreck of the Falls of Halladale, porthole and glass missing, brass with screw dog (part broken) and one hinge, eight retaining bolt holes. flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, porthole frame, ship’s fitting, brass porthole, reconditioned porthole, falls of halladale, russell & co., porthole

Hand operated rope making machine with hooks for 5 strands. Mounted on a steel angle bracket bolted to a piece of timber. Handle painted green, remainder unpainted.Nonemachine tool; metalcraft; rope

The Bell was presented to the Mission by the Aberdeen and Commonwealth Line in October 1957, after the ship made her final voyage to Australia in 1956 and it was broken up in Barrow in April 1957 by Thomas W Ward (UK). In the Annual Report 1957, Padre Oliver mentioned "the bell was found unsuited for the chapel belfry, it is to be mounted on a bracket and placed in the Celia Little lounge."Cast brass bell with wrought iron anchor and hook design wall mount: decoratively plaited cord in maritime knot pattern to resemble chain, sealed with a varnish and attached to cast iron clapper. Wrought iron hook secured by metal bolt. Bell is inscribed in upper case capital letters with MORETON BAY. Anchor attached with four flat headed hexagonal bolts with mighted wooden frame. Bell inscribed with upper case capital letters MORETON BAY. / Also brass presentation wall plaque (see image)bell, anchor, brass, ss moreton bay, ship's bell, plaque, celia little room, bracket, p&o, peninsular and oriental steam navigation company, passengers liners, passenger ships, emigrants, emigration

The padlock and key give context to the types of padlocks used to contain prisoners in Victorian Goldfield prisons. The padlock and key are significant because they show a different type of padlock design used at the Old GaolA brass padlock with closed metal hinge. There is slide to hide the keyhole in the front. There is one bolt on the back. The key fits this padlock. It has "J.HUBBALL" and "MELBOURNE" engraved one side. 'J.HUBBALL" and "MELBOURNE"padlock, gaol, prison, prisoner

Murray Robert Shapter donated these lighthouse fittings. He was a local fisherman and employee of the Public Works Lighthouse service for many years in the Queenscliff and Point Lonsdale area.Fittings from two lighthouses in the Queenscliff / Point Lonsdale area. Key to switch sunvalve on or off and an acetylene pilot light burner from the light at the Black Lighthouse in Queenscliff, and a bolt head sheared off the dome of the Point Lonsdale Lighthouse.lighthouse maintenance, fittings

This beret is symbolic to the Royal Australian Electrical and Mechanical Engineers and is held in the highest regard by serving and ex-members of that corp.Saint Eligius was the patron saint the Royal Electrical and Mechanical Engineers and he is best known for being the patron saint of horses which is depicted in the RAEME insignia.Black woolen beret with cotton headband. Attached is a small metal badge, or insignia featuring a golden crown, a ribbon, a lightening bolt and a horse rearing atop a ball and chain.R. A. E. M. E.royal australian electrical + mechanical engineers, raeme corps, uniform, beret, insignia, vietnam war, diamond valley vietnam veterans sub branch