Black fabric has a geometric type all-over silk embroidered pattern, woven into the fabric. Three panels of fabric make up the skirt, with a lower rounded panel at the hemline, to complete the circular skirt. Above the hemline, two bands 0f plain satin fabric, approximately three cms wide, are stitched in overlapping semi-circles, approximately six cms apart. Ends of these strips are cut to a point, and finished with a tiny black, glistening button. Waistline has a 2.5cm band, fastened with metal hook and eyes. Black fringed braid around hemline.costume, female, long black skirt with satin/button trim

Four-piece wedding outfit comprising bodice, belt, skirt and separate train all made of cream figured wool. The bodice has a centre front ruched panel, stand collar and a fitted two-piece sleeve with full gathered head. It is trimmed with cream-coloured beading with pearl drops. The bodice has seven interior bones and is fastened with metal hooks and hand sewn eyelets which are concealed under the front panel. A separate pleated belt fastens centre back. Plain gored skirt with separate train that ties around the waist.wedding dress, 1890s fashion

A razor strop is flexible strip of leather or canvas used to maintain a shaving edge on a thin blade such as a straight razor. Fine powdered jeweler's rouge or other pastes can be added as an abrasive to polish the blade. The strop may be a hanging strip or a hand-held paddle. This one is a hanging strop. Strops were quite commonly found in barber shops and homes before the invention of the safety razor, They are still used for sharpening tool blades. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. KEEN EDGE MANUFACTURER In March 1906 Popular Mechanics magazine included an advertisement for Keen Edge Strop. The promise given by the advertiser, Eddy Mfg. Co. (206 Broadway, New York) was “Use the Keen Edge strop for 90 days and if not satisfied return to us and we will refund your money“. The advertisement was for a Combination Razor Strop, “the only strop made which requires no dressing.” Readers were invited to send for a booklet on Razor and the Face. In 1924 Popular Mechanics, published by Hearst Magazines, displayed an advertisement seeking a sales manager “… to sell [to] drug, hardware and cigar stores Keen Edge Strop Dressing, which sharpens straight razors and safety blades and removes old razor strops.” At that time the Keen Edge Mfg. Company was in Dallas, Texas. Razor strops are of historical significance, representing personal effects of men from the time period when men relied on strops to keep a sharp edge on their shaving blade. Strops were commonly owned and used until the acceptance of safety razors.Razor strop, leather and metal. Keen Edge brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather handle, the other end has metal, swivel hook hanger. Inscriptions pressed into leather at the ends of the straps. Impressed into leather "FINEST SELECTED HIDE", "KEEN EDGE", "FINISH" (black stained side), “A SHARPENER" (red stained side), “1 2 3”warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, keen edge razor strop

A razor strop such as this one was used to sharpen and polish straight-edged razors. This particular design has a swivel hook with a locking clip that allows for movement as the strop is being used. This strop is branded "Sherlite". On May 5th, 1922 the Commonwealth officially accepted and advertised the Trade Mark Application of Thomas Sherry of Victoria, for the Trade Mark of "Sherlite" to be used under the heading of "Leather, Skins unwrought and Wrought”. Thomas Sherry’s application was to use the word “Sherlite” for detachable soles made of rubberised leather. Straight razors and cut-throat razors were the major tools for shaving before the safety razor was invented in the 1880s and even today specialist shaving shops still sell straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap with a shaving brush that had boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade's edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas, or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools, and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are handheld. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish.Razor strop, leather, and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has a padded, bulbous-shaped leather grip handle, the other end has a metal, swivel hook hanger. Inscriptions painted in gold on leather at the hook end.Razor strop, leather and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather grip handle, the other end has metal, swivel hook hanger. Inscriptions printed in gold on leather at hook end.Printed gold lettering stamped “Sherlite”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, sherlite razor strop, personal effects, toiletries, thomas sherry

According to the Australian War Memorial, artillery were known to have used such leggings during the First World War, as were more well known units such as the Australian Light Horse.Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior with a press stud. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the legging and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Manufacturer's stamp "J OAKMAN/1939" on side "[broad arrow]/NB", the size "15" is also stamped.legging, uniform, world war ii, second world war, world war 2

According to the Australian War Memorial, artillery were known to have used such leggings during the First World War, as were more well known units such as the Australian Light Horse.Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior with a press stud. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the legging and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Manufacturer's stamp "J OAKMAN/1939" on side "[broad arrow]/AG", the size "15" is also stamped.legging, uniform, world war ii, second world war, world war 2

Black cotton with all-over gold paisley type floral patterning. Fully lined with brown cotton fabric. A slight train at the back hemline, and two V shaped flaps-one either side of the back opening, which probably accommodated bussell-like padding. The skirt is tightly gathered at the back to facilitate the padding. Front of skirt is flat, with a little easing of gathers. Pocket inside right hand side seam. A dark brown corded piping edges the hemline. Two metal hooks and eyes, fasten the waistband. Relocated to Clothing Box 176 10.2.2022costume, female, long black and gold patterned skirt

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

Clothing. High stand-up embroidered net collar-close fitting to the neck, and fastening at the back with now 4 metal hooks and loops (one hook missing) and edged at top and bottom with tiny black beads. Five metal ''curved wires'' 7 cm long, are spaced around the up right ''collar'' (to hold in place). The embroidered net forms a V shaped panel at the centre front, and has 15 silk covered oval buttons .8 cm long, from throat to lower bodice. This panel is bordered by embroidered and beaded braid, 7 cm wide and giving a cross-over effect. Cotton tape inside waist 66 cm long fastens with two metal hooks and eyes.Under this lace cross-over, the bodice is shirred and pleated, to give fullness for movement. Pleats are ''caught-in'' at the waistline. An elbow length over-lay of sheer silk fabric, edged with the beaded braid. The sleeves are silk fabric to the elbow, and then narrow in to a three hook plackett at the wrist. This lower sleeve with a 2.5 cm lace frill, and a spotted tulle fabric, and ''dotted'' at the upper side with a double row of tiny black beads. A false tucked effect at opprox knee level at back of skirt. Back hemline extends to a small ''train''. Hemline is heavily weighted.costume, female, full length long sleeved black dress

This double headed hammer seems to be modified for a particular use, with the addition of a one-pronged claw on one end. It was used in the making of ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This hammer is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This hammer was modified and was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Hammer, small, double ended; metal hammer one end, wooden bulbous handle, metal claw hook at the end. This hook is part of a claw hammer with one prong broken off, perhaps to serve a particular purpose. The claw end has remnants of red paint. This hammer is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, double ended hammer, modified hammer, sovereign of the sea, ship model, hobby, ship model tool, english war ship

Circa 19th century. A pair of child's mid-brown leather leggings that extended over the child's knee. The leggings are lined with a soft napped fabric. They button-up down the outside of each leg, with leather covered buttons. An elastic strip is attached to the bottom of each legging and this passes under the child's boot and is buckled up to keep the legging in place.Circa 19th century. A pair of child's mid-brown leather leggings. The leggings extended over the child's knee. The leggings are line with a soft napped fabric. They button up down the outside of each leg, with leather covered buttons. An elastic strip is attached to the bottom of each legging and this passes under the child's boot and is buckled up to keep the legging in place. A metal button-hook trade marked Ezy Walking is also displayed.No maker's markearly settlers, market gardeners, bootmakers, moorabbin, bentleigh, cheltenham, clothing

Cream coloured taffeta wedding dress. Square yoke at front with spiral bead pattern and tassels of bead across lower edge of yoke. V shaped neckline at back with yoke and tassels. Short sleeves of double layer of net embroidered with flowers. Front and back of bodice of embroidered net. Neckline lined with 10cm cotton lace. Bodice fully lined with cotton fabric. Two vertical side panels of 5cm silk lace from shoulder to waist with triangular shaped tabs (12cm) extending to side seams. 5cm silk lace with 12cm triangular tabs across the waist at back of bodice. Taffeta floor length skirt 5cm lace with 12 cm triangular tabs extends from waist on LHS down to 3cm above hemline and extends across the front in a U shape to side on RHS and then across the back of the skirt in a U shape to the LHS. Triangular insert of embroidered net (45cm at hem) on LHS, from hem to 42 cm above hem. Centre back opening from neckline(25cm) fastened with seven metal hooks and eyes. Satin fabric belt with horizontal pin rtucks fastened with two metal hooks and eyes. Fabric circular buckle (5cm diameter). Lower edge of skirt lined with cotton fabric (14 cm wide). Semi-circular cotton padding stitched under arms.costume, female, cream coloured wedding dress

High round neckline finished with a 2 cm fine striped silk stand-up collar-(this is now severely damaged). One metal hook fastener at the neckline, but no loop remains, although thwere is some evidence of a hand stitched remnant of a loop. Eight rounded buttons (one missing) are bound with silk thread. Sleeves have a fine rouleau piping at shoulder. They are round in shape at the elbow, and finished with a flounce, which is trimmed with 2.5 cm band of contrasting, finely striped silk and a 5 cm wide silver silk braid, as in 11400.975 and 11400.976. A gathered frill and a band of striped ribbon trim the upper edge of the flounce. The striped ribbon, and silver braid trim the front panels, either side of the button opening, and a band of the striped ribbon and silver braid trim the lower edge of bodice.Bodice and sleeves are lined with cream polished cotton, while the lower front panels, which give a peplum type of effect, are lined with cream silk. Centre back panel has a fabric bow, trimmed with the darker striped fabric, and the silver braid bow is 13 cm wide, plus the 5 cm silver braid. Pleated tails of the bow are part of back bodice. An inside 2cm wide cotton tape, with metal hook, and hand stitched loop, fastens around the waistline. Garment is machine and hand stitched. Buttonholes are hand -stitched.costume, female, gold silk victorian bodice

This dress was featured in the book "Love Vintage", published 2009 by Carter's and has appeared in vintage fashion parades at the "Love Vintage" fair and the 2016 Glen Eira Storytelling Festival. This dress is an example of the "atomic" style printed design that was popular in the '50s and also shows adaptive use by its wearer, to facilitate breast-feeding.Sleeveless day dress with flared, mid-calf length skirt and big style front. Extra deep pockets and black piping trim to ornament. Bib style front features two large buttons and has been adapted for breast-feeding: the front is secured with press studs and the centre front seam underneath has been opened up, secured with a hook and eye. Side metal zipper. Printed cotton in multi-coloured "atomic" style design. Labelled Julius Pollack Original

Coat - Khaki colour wool fabric uniform great coat. Double breasted with six buttons. Collar which fastens with buttons and metal hook and eye fastener. Shoulder epaulettes with buttons. Back has full length inverted pleat with lower vent with two buttons (missing) concealed closure - double half belt with two buttons back at waist. Buttons - brown colour plastic. Two inset front pockets with flap. light brown colour cotton half lining and sleeve and pocket lining. three white colour cotton fabric manufacturers label, two inside back below, one inside lower edge left side.Manufacturers information - black ink stamp. Top - "CGCF/Victoria/SIZE 7/ 1965/ ^". Middle - "REGIMENTAL NO./ NAME" Lower - attached only at top - print illegible.uniform, army, great coat, post ww2

Coat - Khaki colour wool fabric Great Coat. Double breasted with eight buttons. Collar which fastens with two metal hook and eye fasteners. Shoulder epaulettes with buttons. Back has top inverted pleat, below waist inverted pleat with lower vent with two button closure. Double half belt with three buttons back at waist. Thirteen gold colour plastic buttons with metal shank to interior brown colour plastic button. Buttons have raised emblem - crown and shield - This is an Officers Coat. Two inset front pockets with flap. Brown colour cotton sateen lining to coat with two concealed pockets. No manufacturers label.uniform, army, great coat

Wooden tripod mount for lamp, signalling daylight, short range, MK II. The legs are shaped to a point at the bottom and shaped to form a circle when closed. Each leg has a metal fitting attached by metal screws at the top, which supports a circular metal collar fitting for the mounting of the lamp. A khaki coloured stiched canvas webbing with brass buckles is attached at one end to the metal fitting at the top of one leg. The other end has a circular sleeve for using to keep the wooden tripos mount legs closed for storage. One leg has a small brass ring mounted at the top. A metal hook is mounted under the lamp mounting collar.STAND LAMP OR HELIO A MK IItripod, helio, lamp, daylight

Clothing. Girl's white long sleeved waisted linen jacket. Front opening jacket with 4 cm band from shoulder to waist forming V shaped neckline. Bodice of jacket has 8 cm vertical lace inserts next to the edge of the bands, continuing over the shoulders and down the back of the bodice to the waist. A 16 cm lace insert runs at right angles to the bodice inserts along the top of the kimono cut long sleeves. The sleeves have an 8.5 cm turned back fabric cuff. From the waistline is an ungathered skirt widening slightly at the hem. The front opening is fastened at the waist with one metal hook and cotton loop.Stitched in red cotton inside back of neck 2/4.costume, children's, girl's white waisted linen jacket

Khaki coloured canvas legging constructed of three panels, sewn together with beige topstitching. Gaiters fasten around leg by way of nine hooks which fit into metal eyelets; a strip of canvas runs under the foot and is buckled on the other side. One tag on interior and printed manufacturer's information on interior centre panel; printed in black. Cotton shoelace is fed through one eyelet at top; shoelace has one aglet and one end without an aglet.Tag reads "2-R"; printed inscription reads "2R/LEGGINGS,CANVAS, M-1938 DISMOUNTED O.D./THE BRAY COMPANY/10-27-43 W 12-036 OM 114B/72-L-61923/JEFFERSONVILLE OM DEPOT"second world war, uniform, jeffersonville

Uniform Great Coat issued to "WES BERTUCH." Refer Cat No. 1664.2 for service history.Coat - Khaki colour wool fabric uniform Great Coat. Double breasted with six buttons. Collar which fastens with buttons and metal hook and eye fastener. Shoulder epaulettes with buttons. Back has full length inverted pleat with lower vent with two buttons concealed closure. Double half belt with three buttons back at waist. Buttons - gold colour plastic with shank and metal split ring. Buttons have raised emblem - crown and crossed rifles - infantry. Two insert front pockets with flap. Khaki colour cotton fabric, half lining and sleeve and pocket lining. White colour cotton fabric manufacturers label - inside back below collar.Manufacturers information - black ink stamp. "8405-66/ 012-0495/ DUNLOP/ NSW/ 1966/ SIZE 7/ D^D" Very faint blue ink pen. "WES BERTUCH" uniform, army, great coat, wes bertuch

1. Trousers issued to "D.R. Harris".Trousers - part of the Winter Ceremonial Uniform worn by Recruit to Leading Seaman ranks RAN. Known as Bell Bottom trousers. 1. Navy blue colour wool fabric. Trousers with inset front pockets with button closer. Two layer front flap fly with numerous buttons. Buttons - black colour plastic buttons. Blue and white colour cotton ticking lining to Waistband and pockets. White colour cotton manufacturers label, back inside waistband. 2. Navy blue colour wool fabric with inset side pockets, fob pocket, back pocket with concealed button flap. Five button fly and metal hook closer. Beige colour cotton lining to waistband and pockets. Manufacturers information - black ink print. 1. C.G.C.F./SIZE NI?/ R.A.N./ MADE IN AUSTRALIA". Also black ink stamp "D.R. HARRIS"uniforms, ran, d r harris

Clothing. Cream cotton net, woven with a goemetric pattern of filligree diamonds and tiny squares. The garment is fully lined with the most delicate, and sheer cream silk. A peplum ettect 7 cms deep, is finished with 9.5 cm deep peak at the centre front. Two metal hooks, and stitched eyes are the only fasteners, and are located at the waistline on the peplum seam. The curved front bodice is edged with a 3.5 cm deep frill of cream net, which is finished at the outer edge with two rows of stitching in a heavier weight thread. The front bodices are gathered at the centre front to the peplum. The long sleeves are finished at the wrist, with a double frill of plain tulle, also edged with a double row of stitching, in a heavier thread.costume, female, silk and net blouse

Clothing. Ladies' collar. Net fabric, entirely sewn into 'pin-tucks' .5 cm deep in the high stand-up collar, and increasing to 7.5 cm at the lower edge of the jabot front. Opening at the back, the jabot is fastened by nine metal hooks, and hand-stitched loops. Collar has a tightly gathered double frill of the tulle fabric, at neck and is held up right by five 'covered' 'bones'. The lower edge of the front and back is edged with a 1.5 cm wide silk fabric frill. Centre lower edge of back has two 59 cm long silk ribbon ties. This ribbon is also attached to the lower edge of the jabot 58 cm and 60 cm long - presumably for the wearer to tie firmly in place. Neckline seam is re-inforced and neatened by an organdie type fabric, hand-stitched in place. Two fine elastic loops (now perished) one 52 cm, one 58 cm would once have helped to hold the jabot in place, with the arms passing through the loops, to keep the jabot in place. Detached sleeves. Net fabric, entirely sewn into .5 cm tucks. Reaching from the wrist to above the elbow. A double net frill edges the wrists, where a 6.5 cm opening, fastens with metal hooks and hand-stitched loops. A cotton tape, .5 cm wide neatens and re-infrces this seam, and a row of chain stitch, in silk thread embellishes the outer side of the seam. Upper edge of the sleeve has a fine binding of silk ribbon.costume, female, cream tucked net collar and jabot

Clothing. Cream coloured lace silk wedding dress. Dress made from fine silk fabric with self stripe, fully lined with cream coloured linen. High round neckline with stand up lace collar(6cm). Bodice at front has crossover from shoulder to waist, forming deep Vshape at centre front with net insert below the collar. Net insert has vertical pin tucks. Bodice front and back has cream coloured lace overlay that extends over the shoulders to halfway down the 3/4 length sleeves. Hem of sleeves trimmed with embroidered lace with geometric pattern. Cummer bund of pleated silk fabric (7cm) is attached around waistband. Floor length skirt is gathered into the waistband.Front of skirt has straight lace panelsoverlay (37cmX 90 cm) including 20 cm flounce at lower edge, attached at waistline. Back of skirt has gathered lace overlay attached at waistline extending across side seams and over the edge of front lace panel. Centre back opening fastened with eighteen metal hooks and eyes from collar to waist and six metal press-studs below the waist. Cummerbund fastened with three metal hooks and eyes. A fabric insert at centre back fastened with press-studs. Collar has five pieces of stiffening plastic. Bodice has three bone casings across front above waistline, and four across the back. Cotton tape band (66 cm X 3cm) attached inside bodice at front with hook and eye fasteing.Printed on inside waistband, ''AMALIA SALXANO FARRONE'' NAPOLI ''MODE +CON----'' VIA EGIZIACA A PIZZO FALCONE 93''. Printed inside LHS sleeve at arm pit ''SAXONIA 48X''.costume, female, cream coloured wedding dress

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots.The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century.Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic (as is item 8535.1). The second type has a post in the center where the thread is wound (e.g. item 8535.2). The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace. One type of tatting shuttle produced by "Aero" from the 1930's to the late 1960's was an anodized grey coated aluminium shuttle with a sharp pick at one end. In the 1970's it was superseded by the grey plastic "Aero" which has a removeable bobbin which you can put on the end of the shuttle to make thread winding easier and an embedded crochet hook for joining picots. The "Aero" company developed in Redditch, England - a town renowned as a centre for manufacturing needles. Firms run by Henry Milward and Abel Morrall were based in Redditch and by the 18th century Redditch was manufacturing one million sewing needles per year. Abel Morrall Ltd launched the "Aero" brand in 1936 and greatly expanded the firm's product line to include tatting shuttles and knitting needles. The classic plastic "Aero" tatting shuttle was manufactured in England from the early 1970's until the 1990's. These items are significant as examples of easily accessible handiwork tools that enabled women in the 1930s -1960s to be able to decorate and personalize their household linen and clothing.Shuttle no. 8535.1 is a beige, boat shaped plastic shuttle with enclosed ends, small round central indentations on both sides and an enclosed black removeable bobbin. The shuttle has a grooved point at one end to hold a bobbin and a small metal crochet hook at the other end. Shuttle no. 8535.2 is a beige, boat shaped metal shuttle with pointed ends that are open but snug, small round central indentations and two smaller circular markings (on both sides) and two internal posts with cream thread wound around.Shuttle no. 8535.1 - "AERO" / "ENGLAND" Shuttle no. 8535.2 - "AERO' / "ENGLAND" "39c" (written in ball point pen)flagstaff hill maritime museum and village, flagstaff hill, warrnambool, shipwreck coast, great ocean road, tatting shuttle, aero company, handwork, handwork tool, craft, handcraft, needlework, tatting

Clothing. Rounded neckline at the back, deeply scooped at front. Back fastens with 12 metal hooks and eyes. Back hemline is slightly shirred to nip in the 67 cm waistline, which is peaked at the cntre front. ''Leg-o-mutton'' type sleeves are gathered at the shoulder, and above the elbow, and finished with an 8 cm band of beading and sequin embroidery and a 4.5 cm black silk frill, and a frill of black lace, with an exquisite fruit and floral woven pattern. The neckline is trimmed with a deep lace and sequined silk overlay. Three velvet ''rosettes'' trim the centre front of the overlay. The silk bodice is shirred from just below the shoulders, to give fullness for the bustline sequins, tiny beads, velvet rosettes, silk chiffon frills.costume, female, black silk boned bodice with lace

Cream silk, woven in a jacquard style, featuring a floral design. Fully lined with cream silk satin. A 4cm deep, stand-up mandarin style collar. Eight metal hook and eyes fasten the front in a concealed way. Heavy cording, finished with pearl trimmed tassels,a double inverted pleat, 22cm long at the centre back hemline. Three darts at shoulders giving a 'sleeve-like' shape. Lower edges of which are elaborately corded. A 12cm'slit' at the lower edge seam with the front panel gives more flexibilty to the wearer. Tassel head and decorative 1.5cm ''ball'' are woven in a ''turks head'' style. A 2.5cm wide silk ribbon, attached at centre back, and possibly tied around the waist.A card with the cape is hand written - ''For Historical Soc.if wanted, From M.Bush's Collection. Could have been from Mrs. Mueller's. Gift from Mrs. E.G.JARRETT''costume, female, cream silk evening cape