This hat is one worn by members of the Boy Scouts. Warrnambool today has two Boy Scout groups and Allansford has one. The Warrnambool Tooram group has halls at the corner of Banyan and Timor Streets and in Otway Road and the Warrnambool Norfolk group has its headquarters at the corner of Kepler Street and Raglan Parade. This hat is of interest as an example of the hat worn by scouts in Warrnambool in the 20th century. The same type of hat is still worn by Boy Scouts today. This is a khaki felt hat with a wide brim The crown is folded in 4 sections with four eyelets. There is a brown leather band around the crown and a silver-coloured buckle and two silver studs. The band is adjustable and a piece of string with a knot is used for adjusting the chin strap and for hanging the hat on a peg. The chin strap is made of plaited leather and the inside is slightly stained. The hat is slotted into a wooden frame made of varnished plyboard. The frame is U shaped with two straight sides. A smaller added section of plyboard has been placed on top of the frame and this has an opening at the top to allow the hat brim to slot into the frame. This frame appears to be home-made. scouting in warrnambool, history of warrnambool

Royal Australian Air Force officer’s cap.Navy cotton drill peaked cap with black crossgrain band around exterior. Two black eyelets sit above band on either side. Black patent leather chin strap attached by two gold buttons on brim, slightly misshapen. Embroidered patch carrying a red velvet and metal crown (Queen Elizabeth II era) with blue, green and red embroidered knots mimicing jewels, sits above a gold eagle above now tarnished gold leaves. Interior sweatband in patent leather with plastic layer on top interior, underneath which is a manufacturer’s label with red ink. Strip of folded newspaper (H06.2) inserted inside interior sweatband.Label reads “M.TX/SIZE 6 7/8/A [broad arrow] F/MADE IN AUSTRALIA”. Black ink stamp on inside of sweatband reads “M. TX” inside a circle and “S19/[broad arrow]”raaf, royal australian air force, officer

Rectangular, beige, cloth-covered box with lid. It has a green, pink and red floral pattern overall. The lining and the inside of the lid is of a pale green fabric. A fine, pale green cord and knot braid decorates the edges of the lid. Inside the box there are: a)1 cream-coloured silk, handstitched bird pouch, with a gold-coloured patterned edging. The bird has 2 gold-coloured bead eyes. b) 1 square purple cloth perfume sachet containing rosemary. c) 1 small, glass-covered, coloured picture of a girl in a green and orange dress, with a pigeon on her shoulder. She is feding some birds and chickens.containers, storage boxes

In the evening of 20 November 1940, while en route from Queenscliff to Portsea in Port Phillip Bay where she intended to anchor for the evening, she collided with the 10,364 ton, outward bound passenger liner, MV Duntroon, which struck her amidships on the port side. Duntroon’s captain had believed that she was on a parallel course to Goorangai and overtaking her. By the time he realised Goorangai’s true course, with Duntroon travelling at more than 17 knots, it was too late to avoid the collision. Goorangai was cut in two and sank in less than a minute with the loss of her entire crew of 24. Just six bodies were recovered in subsequent salvage operations. She was the first ship lost by the RAN in World War II.This event is still remembered by the community at an annual ceremony in Queenscliffe. The hat band holds Victorian Heritage Register number S294 / 151982A hat band of Signalman Jack Herbert RAN mounted on a display board containing a copy of a signed photograph of the HMAS Goorangai ships company and an extract of his service record.hmas goorangai, mv duntroon, wwii, royal australian navy, port phillip

The Excelsior IV Log is a nautical instrument for measuring a vessel’s speed and distance travelled. When navigating a ship it is essential to be able to estimate the boat’s speed and distance travelled to determine its position at sea. In times past the only way to measure a ship’s speed was to throw a wood log into the water and observe how fast it moved away from the ship. In the 16th century, the log was fastened to a rope knotted at set intervals. The log was thrown over the stern (back) of the vessel and a crew member counted the number of knots that were paid out in a set time. From this, they could estimate the speed of the vessel through the water. This was known as streaming the log and is also the derivation of the knot as a measurement of nautical speed. The Walker’s Excelsior Mark IV instrument was designed for smaller vessels, such as yachts, launches and fishing vessels. Historical: Thomas Walker & Son was internationally renowned in the manufacturing of ships logs, founding father , Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ship’s log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean), being the most common log in use for two generations. It took until 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. The ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades.Ship's Taff Rail Log, rope attached. Walker's Excelsior IV Log model. Nautical miles dials: units and 10's. "Walker's Excelsior IV Log", "Made in England by Thomas Walker, Birmingham"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log register, taff rail log, taffrail log, marine navigation, a1 harpoon log, cherub’ log, walker’s excelsior mark iv log, ship’s log instrument, mechanical ship’s log, measure ship’s speed, nautical instrument, navigation instrument, massey & sons, thomas walker, blue brick walker, thomas walker & son, thomas ferdinand walker, 48 hour work week

In times past the only way to measure a ship’s speed was to throw a wood log into the water and observe how fast it moved away from the ship. In the 16th century, the log was fastened to a rope knotted at set intervals. The log was thrown over the stern (back) of the vessel and a crew member counted the number of knots that were paid out in a set time. From this, they could estimate the vessel's speed through the water. This was known as streaming the log and is also the derivation of the knot as a measurement of nautical speed. Various manufacturers of nautical equipment had sought over the years to perfect the operation of determining a ship's speed and it wasn't until Thomas Walker and his son Ferdinand developed a mechanical system that eventually made this task became easy for marine navigators. Thomas Walker & Son were internationally renowned in the manufacturing of ship logs the founding father, Thomas Walker (1805–1871), an engineer in Birmingham, patented his mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial then recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kickstarting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ship’s log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (a British-based organisation promoting ties and trade with the British Caribbean), being the most common log in use for two generations. It took until 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log (Trident) and the Walker factory was one of the first to introduce the 48-hour work week for employees.The ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades.Ships Log, Walker Trident electric motor, in wooden box with instructions inside box. The motor dial with electric cord is still inside box.Inscription "Admiralty patent number 3332" and "Walker Trident Electric Ship Log (Mark III), 15-25 volt". On top of lid, hand written, is "G TAYLOR"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ships log, thomas walker & son, electric ships log, marine navigation, thomas ferdinand walker, ship log

1. Shirt - Khaki, polyester/cotton fabric, long sleeves with button cuffs, shoulder epaulettes, two front pockets with button down flap, brown plastic buttons. Cotton manufacturers labels top back of shirt and bottom back of shirt, with black print information. 2. Trousers - Khaki, polyester/cotton fabric, fob pocket, two side pockets, on back pocket with button down flap, metal zipper fly, brown plastic buttons. Three cotton manufacturers labels inside back waistband and back pocket lining with black print information. Polyester lining waistband and pockets. 3. Necktie - khaki cotton knit fabric with unfinished ends. 4. Lanyard - gold cotton cord with knots.Cotton label information - black ink print. 1. Top back of shirt "CLASS - 8405/66 - 017-2261/REGIMENTAL NO./NAME". Bottom back of shirt 'MACHINE WASHABLE/DO NOT BOIL/ DRIP DRY/ WARM IRON/ SALIO/ VICTORIA, 1966^" 2. Back right inside waistband "REGIMENTAL NO./ NAME". Back left inside waistband "Dry clean only/ repress on original creases/ use damp cloth or medium/TO HOT STEAM IRON/ Mending patch attached". Label on back pocket lining. John Sackville - sons/ -Aust - Pty Ltd/ Victoria 1966/^ size 31 RB/ W.31" 1/L 30 1/2/ CLASS 8405/66-018-5518. uniform, army, polyesters

These binoculars appear to have been made for use by service personnel, carrying a broad arrow symbol on the barrel. The inscriptions "MG" may indicate the manufacturer or initials of the owner. The service number 48582 may indicate that the pair was owned by Lionel James O'Dempsey, a Victorian who served as a Lance Sergeant with the 3 Light Anti Aircraft Regiment during the Second World War.Brass binoculars with cotton cord acting as strap, fastened via a knot on one side of a small loop cast into the side of the barrel. Two cone shaped barrels with circular convex glass disc on each wide end. Each barrel joined together via a joint platform approximately halfway and 9/10ths of the way up the binoculars. Binoculars can change shape by barrels swivelling on a central pin. Binoculars also zoom in and out (i.e. barrel reduces and expands) due to grooved dial in centre of pin. One eye piece missing on left side, right side intact but able to be unscrewed. Barrels are tinted green from copper corrosion and retractable barrel sections have black colouring in parts.Inscribed on centre platform between eye pieces "M G", in the direction of the wearer. On top of adjustable barrels: "[broad arrow] (right side)", "Mk VSP-/48582"second world war, worl war two, world war ii, binoculars, looking glass, surveillance

Objects. Clothes brush is oval in shape, with a polished wooden base, and black bristles. Shaped to a rounded point at each end. Bristles 2.5 cm long. Nine rows of bristles. Make-up brush bears Chinese writing on the handle, 23.5 cm long with 6.5 cm long white hairs forming the brush. Hairs are held in an ebony cup shape fitting, attached to the handle. An ebony top-knot completed with a red silk ribbon loop finishes the top of the handle.Hair comb: Tortoise shell, with three 7 cm long teeth, which unfortunately are broken from the fan-shaped decorative top. The fan-shaped top of the comb, has an art-deco type flowing floral design-1920's.Chinese lettering - six characters.costume accessories, female, clothes brush, make-up brush, hair comb.

Any faults in the final product can be repaired by mending. Prior to more advanced machinery, fabric was draped over a mending table and carefully inspected for faults. Quick eyes and nimble fingers were needed. Repairing faults was a highly skilled manual operation. Any knot or thickness had to be removed without affecting the quality of the fabric and mending had to be invisible. In the 1930s to make the day pass faster, popular records were played to the factory workers in the mending room. The top of the table is propped up to make it a well-lit surface over which bolts of fabric were unrolled to check for faults. Menders repaired them with invisible hand stitching. Each weaver stitched a coloured thread in the selvage to show the start of their shift, therefore if mistakes were found the company could easily find who was responsible. This table was used by Gail Morris in teh 1960s. Large wooden table with tilted top. mending table, wool processing, fabric, textile industry

Takeo Iwahashi was the founder of the Nippon Lighhouse for the Blind in Japan. He made an enormous contribution to the lives and progress of blind people around the world, and was a great friend of Helen Keller. The annual Takeo Iwahashi Award was founded in his memory and is awarded to a "worker for the blind whose contribution to work for the blind in the fields of education, training, rehabilitation, placement, prevention and cure of blindness, administration of services for the welfare of the blind or any other program related to the welfare of the blind has been outstanding." Hugh Jeffrey won this award in 1988. This intricate and delicate presentation envelope is made from a heavy guage paper/fabric blend. It features a small addition of origami on the front, as well as Japanese calligraphy and a gold and silver knotted ribbon holding it closed. Originally the envelope unfolded to a large size with a red liner, and contained the Award certificate and cheque for the prize money.Handmade paper envelope with red edging and gold and silver ribbonshugh jeffrey, awards

"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

White embroidered cotton Christening gown. Eleven cm deep bodice with five vertical front neck to bodice and skirt seam, panels of embroidered cotton.Neckline has a casing with drawstring of cotton tape. Cap sleeves gathered at neckline edge, and outer edge trimmed with embroidered cotton. Skirt gathers to the bodice. Bodice also has a casing and drawstring tie, leaving a centre back opening from neck to skirt. Skirt is 84 cm long, and has an elaborately embroidered centre panel - full length. Two bands of embroidered cotton edge the centre panel. Embroidered "bobbles" similar to french knots extend full length beside the embroidered bands, and also form part of the embroidery on the bands. The gown was made by Merle's Grandmother for the christening of Merle's grandmother Geuer's son in 1885.costume, children's, christening gown

Cream coloured knee length dress of crimplene fabric. Fabric has all over pattern of horizontal rows of looped knot pattern. Fabric also has silver thread woven into fabric. Dress has a high round neckline both front and back. Dress is A line, with front having side darts at bust line and two 30cm darts – vertical on either side of centre front from bust line to hip line. At lower end of each dart is a false pocket flap (11cm x 5cm). Back opening from centre neckline has 54cm nylon zipper with hook and loop at neckline. Back has two vertical darts on either side of centre back. Dress has short set-in cap sleeves. Part of ensemble with 11400.521.Top inside back below neckline: Fashioned by Gina of Melbourne Registered TMS Crimplene. Made from terylene polyester fibre. Wash by hand or machine in warm water. Rinse thoroughly. Gently squeeze out surplus water. Drip dry.costume, female daywear, dress

A Line cream coloured knee length coat of crimplene fabric. Fabric has all over pattern of horizontal rows of looped knot pattern. Fabric also has silver thread woven into fabric. High round neck with stand-up collar - 4.3cm. Two press studs at top below collar, plus one hook and loop to close the collar. Full length front opening with 4.5cm band. Five 2cm fabric covered buttons – evenly spaced from neckline to below hip line. Front has two side darts at bust line. Two false pocket flaps (14cm x 5cm) set at 45° angle to side seams at hem line. Long straight set in sleeves slightly tapered to the wrist. Part of ensemble with 11400.520.Top inside back below neckline: Fashioned by Gina of Melbourne Registered TMS Crimplene. Made from terylene polyester fibre. Wash by hand or machine in warm water. Rinse thoroughly. Gently squeeze out surplus water. Drip dry.costume, female daywear, coat

The seed bean industry was a major industry in the Orbost district for the first half of the 20th century. The total area sown with beans for seed at Orbost was estimated to be about 1000 acres. Fisher Bros, grew or supervised the growing of approximately one quarter of the bean seed produced at Orbost, and, in addition, prepared for market and sold a considerable quantity for other growers. From Newsletter February 2015 : "the Fishers took over the old Butter Factory in Lochiel Street. They had sorting tables there in the 1920s. In Orbost, the Fishers had a Shell fuel depot at the back of the bean factory. The Fishers were very enterprising people, very smart. One of their uncles is supposed to have invented the knot that was used to tie the sheaves of hay in the fields. At their Lochend Barn, they had a Blackstone engine which ran on oil. They used to light a fire under it and hot it up to start it. This engine drove all the bean machinery in the barn" The seed bean industry was a major industry in the Orbost district for the first half of the 20th century. the Fisher Brothers were a significant part of that industry.A black / white photograph tajen from a river bank. On the right behind some trees is a barn. On the left between tres is a small building. Reflections can be seen in the water.on back - "Snowy River, Fisher barn on right. Mary Gilbert"bean-industry fisher-beans snowy-river

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid with Horn body and wood top.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid with a wooden bulb on top metal body tapering to a point. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid, Metal and Wood top with brass ferrule between the two.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern fid's are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Wooden Fid with 3 rings around base of knob at the top of fid. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Published by Semco Art Needlework Pty.Ltd> Semco Park Cheltenham Road Black Rock S.9. Farrow Falcon Press Pty. Ltd. 226 Lonsdale Place, Melbourne. For Girls learning embroidery- home/schoolSemco Embroidery Text Book. White outline around Black cover. Large red circle with girl siting in front doing embroidery wearing Victorian style short puffed sleeved dress polka dot pattern and pantaloons red stockings and lace up ballerina style shoes1st Edition Semco Embroidery Text Book 3D Free sampler transfer inside. Booklet contains illustrations and instructions for each stich. Pages 2 and 3 have pencil squiggles across the top.: Stem stitch, Snail Trail, Back Stitch, Lazy Daisy Stitch, Thousand Flower Stitch, Buttonhole Stitch, Long and short buttonhole stitch, Chain Stitch Seed Stitch, Arrow stitch, Feather Stitch, Herringbone Stitch, Cross Stitch, French Knots, Lattice Stitch. Illustrations of designs with stiches referred to on previous pages. stawell

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doilies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. This book has photographs and detailed instructions for a wide range of tatted edgings and insertions suitable for household linens such as towels, doilies and tablecloths as well as patterns for whole mats. Stanley E. Mullen (a businessman) developed Semco Pty Ltd which began as a Melbourne based importation company in 1907. The first three letters of Semco's name were his initials. In 1915 it began manufacturing women's apparel, whitework and transfer patterns. In 1924 the company moved to Black Rock, Victoria and continued to produce an extensive range of needlework patterns and handcraft instruction booklets, threads etc. up until the late 1970's. Semco had a staff that included many young women. It was noted by E.J. Trait (editor of the local newspaper "Standard News") that the firm provided them with good working conditions and the correct rate of pay for women in a time of war - the starting rate for 15 year olds, mainly girls at Semco was 25 shillings per week. During World War 2, Manpower Regulations could be used to coerce workers to move into jobs that supported the war effort, but Trait argued that being employed at Semco could make this unlikely as the firm made some goods essential for the war effort. He even suggested that women be encouraged to produce needlework items (and play a part in the war effort) by sending them as presents, to the troops up north. He also heaped praise on the Semco workplace - noting that no Saturday work was the norm, allowing employees to shop and have "hair-do's" before enjoying a relaxing weekend! Semco also had a female cricket side in the women's Saturday association. After the war the firm stayed in production until the early 1990's when it was taken over by Coates-Paton Pty Ltd. Norma Benporath (1900 - 1998) was an expert in tatting techniques and taught and published extensively on the subject. She was born in New Zealand with impaired sight but cataract surgery restored 50% vision to one eye. She was inspired to learn tatting whilst watching her aunt tat and being told that tatting did not require as much sharp vision as embroidery. She quickly learnt to design her own patterns and published over 1000 tatted lace patterns between 1929 and 1952. She became a regular contributor to magazines (such as Home Beautiful) and newspapers across Australia. Her designs were also published in New Zealand, South Africa as well as the U.K. and U.S.A. When Semco, a thread manufacturer, noticed a rise in the sale of fine crochet threads, they realized they had an untapped market to explore. Norma designed a collection of tatting patterns for Semco that were used to help promote their threads. Norma also worked with Semco to produce a line of threads and shuttles specifically suited to tatting. In 1997, Norma was inducted into the "Order of Australia" for "Service to the craft of tatting as a designer and through the international publication of her patterns".This item is an excellent example of the needle work being enjoyed by women in the 1940's in Australia and the skills of the Australian designer, Norma Benporath. It is also an example of the trend that emerged for craft companies such as Semco to publish pattern books in order to advertise their own materials.A 32 page soft cover instruction book with green front and back covers showing two tatted doily designs. The book includes black and white photographs and written patterns by Norma Benporath.Front cover - "TATTING" "For / EXPERTS/ and / BEGINNERS" "By/Semco" "SEMCO INSTRUCTION BOOK" "No. 16" "WITH ILLUSTRATIONS AND INSTRUCTIONS" "9" Back cover - "FOR INSTRUCTIONS FOR WORKING SEE PAGE 22" "Published by Semco Pty. Ltd." "BLACK ROCK, 29, VIC"flagstaff hill maritime museum and village, warrnambool, great ocean road, tatting, tatting instruction book, tatting patterns, tatting shuttle, semco, semco pty ltd, norma benporath, needlework, handcrafts, household linen, craftwork

QUEENSCLIFFE was built in 1926 to a Royal National Lifeboat Institution (RNLI) design called the Watson Class. The double-diagonal planked vessel was built by A McFarlane and Sons in Port Adelaide SA, commissioned on the 6th of March 1926, and then officially named and launched on the 9th of April 1926. The original Wayburn petrol engine was replaced with a Gardner diesel. This gave QUEENSCLIFFE a top speed of 7.5 knots with a range of 350 miles. The equipment carried aboard included a VHF Radio Telephone, HF radio transceiver, visual signals, life rafts, hand rocket gun, flare gun, generator, search light and first aid supplies. In the tradition of many shore based lifeboats, QUEENSCLIFFE had its own shed and slipway and was always ready for launching when required to go to sea in response to an emergency call. Its area of operation included 'the Rip' at Port Phillip Heads and the Bass Strait seas immediately offshore. She was taken out of service in 1976 by the Marine Board of Victoria and subsequently offered to the Borough of Queenscliffe for care and display. The Lifeboat is listed on the Australian Register of Historic Vessels (ARHV). During her 50 years of service the Queenscliffe attended many calls for assistance both inside and outside the Heads. Some of the vessels and calls for help the lifeboat attended were: 1960 - Army Commandos lost in the Rip 1967 - The search for the late Prime Minister Harold Holt 1974 - The last attendance to a vessel was to the Brisbane Trader which was on fire The shed which housed the lifeboat is located on the Queenscliff 'New' or 'Steamer' Pier (built in 1884). This shed includes the internal section of the slipway used to launch and retrieve the lifeboat. The external slipway and some other structures associated with the lifeboat shed have been removed. Originally fitted with two masts, the stern mast being removed in the 1960's. A retractable centre plate was used when under sail. Delivered with an 80 hp Wayburn petrol motor which was later replaced by a 72 hp Gardiner diesel. Top speed of 7.5 knots and a range of 350 miles.QUEENSCLIFFE is a wooden lifeboat built in 1926 in South Australia. It has a long association with the Victorian port of Queenscliff. It was manned voluntarily by their local fishermen and is therefore closely attached to families of the Queenscliff community. It is a rare surviving example of the coastal shore-based lifeboats that were based around the Australian coastline.The lifeboat 'Queenscliffe' a Watson Class LifeboatQueenscliffelifeboat, rescue, watson class boat

1998 -01/10: chartered to the UK "Maritime & Coastguard Agency" as 'Emergency Towing Vessel' (EVT), based at Stornoway Inclinometer from the ship The Brisbane Trader, the sister ship to the Sydney Trader. Called a "roll on- roll off" vessel, the radical design for the time carried vehicles and containers on deck. The shallow draught allowed the ship access to smaller Australian coastal ports. The officers and crew enjoyed improved accommodation. Built and completed December 1969 by Evans Deakin and co. pty ltd. of Brisbane, they were also the owner. Twin Screw. Diesel Engine. Speed 17.5 knots. 6,236 gross tons, 2,961 net. 4,422 dwt. lbd: 448'5"x70'"7x2-'"3 Broken up at Kaohsiung November 1984. The Engineering business of Evans Deakin and Co. was established in 1910 by Daniel Evans and Arthur Deakin. A shipyard was built at Kangaroo Point where 81 ships were constructed between 1940 and 1971. THe Business was taken over by Downer Holdings Pty Ltd in 2001. From the MV Sydney TraderA period brass inclinometer From the M V Sydney Trader, "MV SYDNEY TRADER 1969 ANL/ 25 20 15 10 5 0 5 10 15 20 25"

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the grip fid, is used for ply-split braiding. The grip fid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid painted brown, flattened point turned end and hole for a lanyardNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlinspike

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the grip fid, is used for ply-split braiding. The grip fid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid painted half green, flattened end with a lanyard holeNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlinspike

Royal blue rayon knee length dress made of rayon fabric. Bodice is sleeveless with three shoe string straps on each side. Straps have a decorative knot at shoulder joining the three straps. The neckline is an inverted U shape across the front. The bodice is lined with the royal blue rayon fabric. The front of the bodice has two pleated panels running diagonally from the top with the right side overlapping diagonally. The skirt is an A line shape attached to the bodice with two pleats on either side of the front and back. The skirt is lined with brown paper stiffening fabric. A 9cm horizontal band with three pleats is attached above the waist line. On each pleat is a row of decorative buttons (6, 5, 6) made of strings of clear glass beads coiled into a spiral shape. The central back opening has a 36cm zipper.Tag sown inside back of bodice on RHS - Styled by Jeffrey of Melbourne All Rayoncostume, female daywear, dress

The Hiawatha was a Norwegian windjammer sailing from Fredrikstadt. End of September 1910 the ship arrive nearly two weeks before its anticipated arrival date, making the trip in 81 days instead of a 100. Her arrival made the news in the Argus : SHIP HIAWATHA : A SMART VOYAGE. Seeing that she was not expected to arrive here for another couple of weeks or so the appear ance of the Norwegian ship Hiawatha at Port Phillip Heads yesterday morning caused some surprise. It was anticipated by shipping folk that her voyage from Fredrikstadt would occupy about 100 days which is a fair average passage but clipping a big slice off this allowance, the Hiawatha completed her long run from the Nor wegian port in the excellent time of 811/2 days, or within about 36 hours of the best effort previously made by a "windjammer" between these ports. An appropriate finish was given by the Hiawatha to this creditable voyage by a run of a little under three hours from the Heads up to Hobson's Bay, where she dropped anchor at about noon amid squalls of rain, which at times almost blinded her out from view. Few more 'racy' looking sailors than the Hiawatha have visited this port, and as she has proved on the present and many previous occasions sions, her looks do not belie her. Being laden with Baltic timber and in splendid sailing trim, the ship only required favourable winds to make a good voyage. These fell to her lot, and taking full advantage of every opportunity the vessel bowled across the ocean at steamboat speed. Reckoned from the time she cleared the English Channel, her passage occupied only 76 days. Her best work was performed after passing Tristan d'Acunha in the South Atlantic Ocean. From that stage to the meridian of the Cape of Good Hope she was only a week, whilst from the latter point to Hobson's Bay the ship made an equally capital run of 27 days, her best daily record being 29 knots, representing an hourly average speed of 12 knots. Several periods of exceptionally rough weather were passed through, but the ship suffered no ill effects. She will discharge at a berth up the river.One of the ships photograph that crew would leave at the Mission as a souvenir of their visit.Sepia photograph in cardboard frame of a three-masted full-rigged barque.On the photographic in white : Hiawatha On the frame in black: Ship Hiawatha - Oct. 1910hiawatha, windjammer, norway, full rigged barque, ships, crews and ships

Bayonet was one of 20 Attack class patrol boats built for the Royal Australian Navy between 1967 and 1969 by Walkers Ltd of Maryborough Qld . In the 1960s, Australia became more closely involved in events in the Asia-Pacific region. This led to improved surveillance and control of our enormous coastline, especially the northern approaches. Patrol boats controlled illegal fishing, smuggling and immigration, search and rescue, and occasional inshore survey work. Her hull is steel and the superstructure is aluminium. It is armed for small-scale encounters, with one 40-mm Bofors gun and two 0.5-inch Browning machine guns to fire warning shots across the bow of a suspect vessel. She was 32.6 m long and 6.1 m wide, 150 tons, powered by two paxman diesel engines and capable of about 24 knots. . A sister ship featured in the popular ABC-TV series Patrol Boat. The Bayonet conducted patrol duties around Australian waters until her scuttling by defence maritime services on 21 September 1999 in 82 m of water off Torquay in Victoria. propeller, hmas bayonet