White child's dress of heavy cotton lace. Sleeveless bodice with arm holes edged with 3cm ungathered broderie type lace. High round neckline with 5cm lace flat collar. Back opening to waist with 5 x 1cm white buttons. LHS is seamed with buttons attached. RHS edge has button holes pushed through edge of lace. 5mm cotton tape is threaded through seam at neck line to form ties at the back. Skirt is made up of two layers of fabric gathered onto the bodice. Underneath layer is 25 cm deep - 12 cm plain fabric from waist with 13 cm edge of broderie type lace with scalloped edges. Top layer of 13cm of broderie type lace with scalloped edges. Unlined. Machine stitched. Skirt pieces are single pieces of lace fabric with seam at centre back.costume, children's, infant boy's dress

Belonged to donor's aunt1960s navy blue fine silk shantung fabric dress with lace bodice and elbow length sleeves. Metal zip, hook& eye down back. A-line skirt with two front seams and pockets. Dress is below the knee length. Lined from above bust line in bodice with fine blue crepe fabric. Matching jacket of fine silk shantung with lace trim on collar& cuffs of full-length sleeves. Self-covered shantung 4 buttons and stitched buttonholes. La Petite label in jacket and underarm on dress.La Petite Model Frocks, 165 Collins St Melbourne.la petite

B+W photo on fawn board. School students at Eaglehawk State school. 33 boys and 1 female teacher in long frock, boys all in suits, some with large white collars and lace up boots. 8 Boys seated, others standing. Inscription: in image('IV''). Hand written on back in pencil: 'Miss l.Hall/3 in 1a block 4/-','Eaglehawk State School'organization, education, eaglehawk state school

Clothing. Child's white linen dress with fold over lace trimmed sailor collar (13cm) and neckline casing. Dress has yoke front and back with a dropped waist trimmed with insert lace (ribbon missing). Above the hem is a horizontal strip of lace (3cm) and two narrow tucks.Item is edged with 5 cm broiderie lace with scalloped edge. Dress has cap sleeves of 5 cm broiderie lace. Full length centre back opening fastened with cotton tape ties at neckline and two pearl like buttons at lower edge of yoke and at dropped waistline.costume, children's, child's white linen dress

Blousettes were popular for ladies wear under suits and cardigans in the 1930's and 1940's. Part of the Bette Jones collection.Fine voile and net blousette (blouse front and back); cream coloured. Ties at side- elastic at waist and back, satin ribbon at front and back. Front panel of three vertical panels of petit-point coloured flowers, centre panel flanked, each side, by four rows of cotton edging lace. Stand-up net collar of three rows of same edging lace. Back neck opening fastened with metal hooks and eyes.costume, female underwear

This gown, one of two similar items in the collection belonged to one of the Ward Cole sisters, Miss Margaret Morison Ward Cole or Miss Agnes Bruce Ward Cole, daughters of George Ward Cole. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son at St Ninians in 1867. In later years St Ninians was subsequently sub divided and later demolished. A black and yellow velvet, wool, lace and silk dress from circa 1882. The bodice features a yellow silk, black lace and black velvet collar finishing high on the neck just below the chin finished with a black lace ruffle. The collar has a flap across the front of the throat that attaches at the side with a V-shaped baseline that contributes to concealing the fastenings of the bodice. The dress features a gathered central panel of black lace covered lemon silk, which falls from the neckline to the floor. At either side of this panel are matching panels of black velvet. The remainder of the dress and sleeves are made of black wool featuring a self-striped and spotted pattern. The dress fastens down the centre front with concealed black buttons hidden underneath the right velvet panel. The head of the Amadis sleeve sits on the natural shoulder line and finishes tightly at the elbow. The volume of the sleeve is created by ten pleats at the head of the shoulder, sewn to the bodice and is gathered at the elbow. The sleeve is finished with a black velvet ribbon with a bow and a black lace frill. The base of the dress is finished with a ruffle of the black dress wool. The dress features a small train. The dress is boned at the back waist and features an inset panel just below the waist of gathered fabric which forms the train. st ninians, george ward cole, visiting gown, brighton, margaret morrison ward cole, agnes bruce ward cole

Black and White formal wedding portrait. Mrs Alice Breen stands on the left wearing an ankle-length dress with high neck and full-length sleeves. She has a knee-length veil with a floral headpiece and is holding a large bouquet. Her hoes have a small curved heel. Mr Tom Breen is seated on a wicker chair. He is wearing a dark 3-piece suit, a shirt with a high collar, study lace-up shoes and he holds a pair of white gloves. They are in a photographer's study. Both look solemnly at the camera.

Cream coloured linen and lace ladies dickey. Front opening with crossover. Each side made from two pieces of silk fabric. Crossover forms V shaped neckline. Edge of crossover has lace trim (5cm) folded back to form collar effect. Lace has scalloped edge. On each side at waist level. Front has tape tab (2cm X 9cm). Tab on LH side has 5cm loop attached at side. Back panel of linen fabric has .5cm tape stitched along hem with long ties formed either end(59cm & 34cm).costume accessories, female, linen and lace ladies dickey

The cape is of a style from the Victorian or the Edwardian Era and so provides a good example of women's clothing from that time. The light colour, silk material and lace suggest a cape used for special occasions with the possibility of initially being a wedding cape.The item is of significance historically and socially as an example of women's clothing in the Victorian and Edwardian eras.Ladies cape consisting of two circular tiers and a collar. The inner tier is knee length with a thin lace insert around the hem. The outer tier is elbow length with a wide lace edge and the thin lace insert inside this. The collar has lace edging and a lace insert of the same width. The lace used is of a repeat flower pattern most likely made of a combination of silk and cotton. The cape material appears to be a cream ribbed silk with the lining being of a polished cotton or silk variety. Both materials have a silken sheen in the right light. A silk ribbon ties the cape at the neck. The lining and lace have been sewn with fine hand stitching.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, ladies cape, double cape, silk cape, layered cape, cape with lace collar, decorative lace edging, victorian era, edwardian era

Baby clothes worn by Una Reynolds, member of the Society. Born 1927, died 2003.Creamy-white, fine voile baby's dress.Bodice and short sleeves in magyur (dolman) style with buckingham point lace inserts. Square neck in lace edged with lace edging gathering. Skirt with lace inserts and handkerchief hem, edged with gathered, wider buckingham point lace. Side seams of bodice and skirt are lace inserts. Back opening with two buttons and buttonholes and white cotton tape tie from lace at neck.|Bolero in same fabric and lace. Has Peter Pan collar edged and trimmed in lace with silk ribbon insert tied at neck. Sleeves and front opening edged and trimmed with lace; lower edge has handkerchief points trimmed with lace.costume, infants'

Black long-sleeved ladies’ silk blouse. High round neckline at front with V shaped lace insert from throat to bust line. Stand up lace and net collar. Top edge of collar is trimmed with pink ribbon piping and gathered cream coloured lace. There are three strips of brown tape attached vertically to the collar at each shoulder and front RHS of collar to hold plastic strips to support the collar in upright position. One piece of plastic still in place. On either side of centre front are vertical panels of pintucks with knife pleats on either side facing inwards. There are three small pink decorative buttons (1 cm) below the throat and another group of three buttons 10 cm below the first group. The top has a back opening fastened with 10 press studs. The back has two vertical panels of pintucks and knife pleats. The long sleeves have cuffs at the wrist (5 cm) with U-shaped split on upper side. Each cuff has three decorative pink buttons on one side of the U-shaped split. The lower edge of each cuff is trimmed with black lace (5 - 6 cm) that falls over the wrist. Machine stitched.costume, female evening, black silk top

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". It looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. Paragon knitting, crochet and tatting books have been distributed throughout Australia since the 1930's, originally by "Paragon Art Needlework Pty Ltd" of Sydney, N.S.W. From 1946 these books were designed and printed in Australia from patterns provided by British and Australian thread companies. Consequently these patterns may also appear in similar British and American publications. Paragon Book No. 104 is an instruction book designed for the "beginner" whilst Paragon book No. 105 is designed for the more experienced tatter. The layout of these books was typical of the 1940s period when paper was in short supply. Most of the pattern books were approximately 18 cms wide by 24 cms high and some were smaller at about 13cm by 21 cms. The type used was small (about four lines of text per centimetre) which was difficult to read. This item is an excellent example of a needle work pattern book available to women in the 1940's in Australia.A soft covered, 16 page instruction book titled "Tatting Designs". It has black and white photographs and detailed patterns for tatted doilies, a tray mat, a chairback and arm rests, a cheval set, a luncheon set, collars and edgings for an underskirt, gloves and handkerchief. It is published by Paragon Art Needlecraft of Sydney.Front cover - "Paragon's No 105" "PRICE 1/3" "Tatting Designs" "Household Linens * Personal Wear" Plus a stylized drawing of a deerflagstaff hill maritime museum and village, great ocean road, warrnambool, shipwreck coast, tatting book, tatting patterns, craft, handiwork, handcraft, needlework, shuttle

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". It looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. Paragon knitting, crochet and tatting books have been distributed throughout Australia since the 1930's, originally by "Paragon Art Needlework Pty Ltd" of Sydney, N.S.W. From 1946 these books were designed and printed in Australia from patterns provided by British and Australian thread companies. Consequently these patterns may also appear in similar British and American publications. Paragon Book No. 104 is an instruction book designed for the "beginner" whilst Paragon book No. 105 is designed for the more experienced tatter. The layout of these books was typical of the 1940s period when paper was in short supply. Most of the pattern books were approximately 18 cms wide by 24 cms high and some were smaller at about 13cm by 21 cms. The type used was small (about four lines of text per centimetre) which was difficult to read.This item is an excellent example of a needle work pattern book available to women in the 1940's in Australia.A soft covered 16 page instruction book with black and white photographs and detailed instructions explaining how to tat and eight tatting projects including how to make a collar and handkerchief edgings, published by Paragon Art Needlecraft of Sydney.Front cover - "PARAGON BOOK NO. 104" "PRICE 1/3" "Learn to/ TAT' Back Cover - "36/D5 E/A DO2" - handwritten in pencil flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, tatting, tatting pattern book, tatting instructions, handicraft, needlework, shuttle, tatting shuttle, paragon needlecraft, paragon craft book

Composite face legs and arms. Painted features. Hair - possibly real, dark brown colour. Doll dressed in royal purple gown. Long sleeves with lace cuff. Faux fur collar around V shaped neckline at front and squared collar at back. Lace trim across front of neckline. Faux fur trim across centre front and centre back at hem. Three underskirts. Mauve satin with darker mauve frill around hem line. Stiffened white fabric (Vilene?) White drawers with lace trim on lower legs. Painted on shoes in gold paint. Purple velvet handbag edged with silver cord. Boudoir dolls are dolls that are made to sit on beds and sofas as decorations rather than being used for play. They are also called bed dolls, flapper dolls, and French dolls. Years of Production Although dolls that sit on beds are still being made today, the classic vintage boudoir dolls were made from approximately the 1920s through the 1940s. Some of the earliest dolls, made even earlier than 1920 in some cases, were made in France. Many of the dolls were made in an art deco style.

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, Ivoryflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, Black plastic, "ARCHER" inscribed. "ARCHER" inscribed.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, tortoise-shellflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, ivory, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, black plastic flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Clothing. Black silk-satin fabric, mid-calf length dress, gathered from the waistline. A black, pleated cummerbund encircles the waist, fastening at the left side with three metal hooks, and hand stitched loops. Long set in sleeveshave a fine piping around the arm holes, and have a hand stitched neatening to finish. Shoulder seams are also piped. A long, narrow collar of lace, bound in 2.5 cm satin edging, attaches almost to the waistline-finishing just 9 cm above the waist. A 'bib front' attached at the right side to the bodice lining, attached to the eaistline, and closing on the left hand shoulder side, with metal hooks, and hand stitched loops. Bodice closes over the top with a metal press-stud. Front bodice has three tiny pleats on each shoulder seam and gathers into the waistline seam. Fine georgette fabric, backed with fine net fabric, is with tiny glass beads, and forms the top of the 'bib front'. Fine beading of tiny beads outlines the high round neck. Larger glass beads and silky lace trim the lower 'bib front'. The lg sleeves are gathered lightly at the shoulder, which isoutlined with fine piping. Cut as a straight piece of fabric, a rectangular 'wing effect' at the wrist, is lightly gathered into a 13 cm deep lace cuff, fastening with two metal hooks, and hand-stitched eyes. Sleeves are lined with fine fabric.costume, female, black silk satin dress

Officer's full dress scarlet wool doublet with yellow stand collar and cuffs, and Inverness skirts. Left front of doublet, cuffs and Inverness skirts all edged with white piping. Lower edge of collar, cuffs and skirts are decorated with three rows of doubled, 1/8” silver Russian braid; each row completed with a large whitemetal coloured metal "King Edward VII Australian Commonwealth" button of the period 1901-1911. 5/8” silver lace around top of collar, and top and seam of gauntlet cuff. Silver braid shoulder straps and screw buttons MISSING. Five large buttons at front of tunic (three missing), and one at back waist (one missing). Two large brass belt hooks at side waist of doublet. Lower front skirt flaps have welt pockets lined with linen. Body of tunic lined with a white wool mixture, lightly padded around the underarms. Lower skirt flaps lined with a medium weight cream wool twill and upper smaller flaps lined with a finer cream wool twill. Sleeves lined with cream cotton twill and written in blue ink on lotter right opening lining is '5-7 37'. Collar lined with red wool and neck fastened with two brass hook and eyes. No black patent leather tab at collar.blue ink on lotter right opening lining is '5-7 37'

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots.The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century.Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic (as is item 8535.1). The second type has a post in the center where the thread is wound (e.g. item 8535.2). The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace. One type of tatting shuttle produced by "Aero" from the 1930's to the late 1960's was an anodized grey coated aluminium shuttle with a sharp pick at one end. In the 1970's it was superseded by the grey plastic "Aero" which has a removeable bobbin which you can put on the end of the shuttle to make thread winding easier and an embedded crochet hook for joining picots. The "Aero" company developed in Redditch, England - a town renowned as a centre for manufacturing needles. Firms run by Henry Milward and Abel Morrall were based in Redditch and by the 18th century Redditch was manufacturing one million sewing needles per year. Abel Morrall Ltd launched the "Aero" brand in 1936 and greatly expanded the firm's product line to include tatting shuttles and knitting needles. The classic plastic "Aero" tatting shuttle was manufactured in England from the early 1970's until the 1990's. These items are significant as examples of easily accessible handiwork tools that enabled women in the 1930s -1960s to be able to decorate and personalize their household linen and clothing.Shuttle no. 8535.1 is a beige, boat shaped plastic shuttle with enclosed ends, small round central indentations on both sides and an enclosed black removeable bobbin. The shuttle has a grooved point at one end to hold a bobbin and a small metal crochet hook at the other end. Shuttle no. 8535.2 is a beige, boat shaped metal shuttle with pointed ends that are open but snug, small round central indentations and two smaller circular markings (on both sides) and two internal posts with cream thread wound around.Shuttle no. 8535.1 - "AERO" / "ENGLAND" Shuttle no. 8535.2 - "AERO' / "ENGLAND" "39c" (written in ball point pen)flagstaff hill maritime museum and village, flagstaff hill, warrnambool, shipwreck coast, great ocean road, tatting shuttle, aero company, handwork, handwork tool, craft, handcraft, needlework, tatting

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doilies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. This book has photographs and detailed instructions for a wide range of tatted edgings and insertions suitable for household linens such as towels, doilies and tablecloths as well as patterns for whole mats. Stanley E. Mullen (a businessman) developed Semco Pty Ltd which began as a Melbourne based importation company in 1907. The first three letters of Semco's name were his initials. In 1915 it began manufacturing women's apparel, whitework and transfer patterns. In 1924 the company moved to Black Rock, Victoria and continued to produce an extensive range of needlework patterns and handcraft instruction booklets, threads etc. up until the late 1970's. Semco had a staff that included many young women. It was noted by E.J. Trait (editor of the local newspaper "Standard News") that the firm provided them with good working conditions and the correct rate of pay for women in a time of war - the starting rate for 15 year olds, mainly girls at Semco was 25 shillings per week. During World War 2, Manpower Regulations could be used to coerce workers to move into jobs that supported the war effort, but Trait argued that being employed at Semco could make this unlikely as the firm made some goods essential for the war effort. He even suggested that women be encouraged to produce needlework items (and play a part in the war effort) by sending them as presents, to the troops up north. He also heaped praise on the Semco workplace - noting that no Saturday work was the norm, allowing employees to shop and have "hair-do's" before enjoying a relaxing weekend! Semco also had a female cricket side in the women's Saturday association. After the war the firm stayed in production until the early 1990's when it was taken over by Coates-Paton Pty Ltd. Norma Benporath (1900 - 1998) was an expert in tatting techniques and taught and published extensively on the subject. She was born in New Zealand with impaired sight but cataract surgery restored 50% vision to one eye. She was inspired to learn tatting whilst watching her aunt tat and being told that tatting did not require as much sharp vision as embroidery. She quickly learnt to design her own patterns and published over 1000 tatted lace patterns between 1929 and 1952. She became a regular contributor to magazines (such as Home Beautiful) and newspapers across Australia. Her designs were also published in New Zealand, South Africa as well as the U.K. and U.S.A. When Semco, a thread manufacturer, noticed a rise in the sale of fine crochet threads, they realized they had an untapped market to explore. Norma designed a collection of tatting patterns for Semco that were used to help promote their threads. Norma also worked with Semco to produce a line of threads and shuttles specifically suited to tatting. In 1997, Norma was inducted into the "Order of Australia" for "Service to the craft of tatting as a designer and through the international publication of her patterns".This item is an excellent example of the needle work being enjoyed by women in the 1940's in Australia and the skills of the Australian designer, Norma Benporath. It is also an example of the trend that emerged for craft companies such as Semco to publish pattern books in order to advertise their own materials.A 32 page soft cover instruction book with green front and back covers showing two tatted doily designs. The book includes black and white photographs and written patterns by Norma Benporath.Front cover - "TATTING" "For / EXPERTS/ and / BEGINNERS" "By/Semco" "SEMCO INSTRUCTION BOOK" "No. 16" "WITH ILLUSTRATIONS AND INSTRUCTIONS" "9" Back cover - "FOR INSTRUCTIONS FOR WORKING SEE PAGE 22" "Published by Semco Pty. Ltd." "BLACK ROCK, 29, VIC"flagstaff hill maritime museum and village, warrnambool, great ocean road, tatting, tatting instruction book, tatting patterns, tatting shuttle, semco, semco pty ltd, norma benporath, needlework, handcrafts, household linen, craftwork

Mrs Clare Roper wore this dress to a garden party at Buckingham Palace when she was invited there to represent the Lions Club.The Roper Family is one of the pioneering farming families of the Kiewa Valley. They built and used Ropers Hut on the High Plains. The dress worn by Clare Roper has historical significance as it represents the importance of the CWA which Claire Roper was involved with as President thus being invited to Buckingham Palace. The dress also shows the fashions of the time and indicates ladies living in the small country towns still viewed fashion as important. Since we know it was Clare Ropers dress it is well provenances, is in reasonable condition and has very good interpretive capacity. This brown shirt waister dress has an 'A' line skirt with an inverted pleat on the lower half of both the front and back. The dress has a 'Peter Pan' collar, matching belt, pockets and short sleeves. There are 3 bound button holes and buttons, gold set with pearls, only one is complete. The front top, cuffs and pockets are embroidered with cream lace. There is a press stud and hook at the neck. There is also a side zip opening in the skirt.kiewa, farming; ropers hut; lions club; clothing; clothes; dress; clare roper; high plains; buckingham palace;

This handmade woman’s nightdress comes from the Kinnear family of Allandale, Allansford. In the early 1840s William and John Allan took up a large tract of land to the east of the Hopkins River and in the late 1840s William Allan took over the Allandale section of the run and John Allan took the Tooram section. In 1906 the Kinnear family acquired a portion of Allandale which included the homestead. The nightdress came from the estates of the donor’s great aunts. This item is retained as an example of an early 20th century woman’s nightdress and it has the provenance of coming from the Kinnear family of Allandale Allansford. This is a white cotton nightdress with an opening to the waist which is enclosed with two white buttons. There is a frill of lace on one side of the opening. The white collar also has a large white frill of lace. The long sleeves are inset and have a band of lace at the wrists. There are some stains on the dress. vintage clothing, kinnear family, allansford, history of warrnambool

This opera coat was made for Louisa Jane Cam, nee Rust, born 24/6/1873. Her parents were John Rust born in Hamburg, Germany and Jane Mc Meekin from Port Patrick, Scotland. In 1892 Louisa married John Cam the director of the Hawthorn Brick Company. It is understood Louisa wore the coat to the opening of the first Federal Parliament in the Exhibition Buildings in Melbourne in 1901.This item being an early nineteenth century opera coat has aesthetic interest. It is also important because of its provenance being worn by Louisa Cam at a significant event in Australia's history.A three quarter length Mandarin styled gold threaded brocade, lined coat dress with long sleeves. The fabric is black with gold patterns of leaves and circles. Large circles feature gold, red, yellow, pale and dark blue flower like images surrounded by gold fringes. The yolk section finishes with a small pleat over the flared bottom section. Edging around the neck is black lace. It is understood a fur collar was previously in place. The cuffs of the sleeves are pleated and have a wide frill above the pleating. The lining is pale blue silk . At the end of the sleeves the lining has hand ruched binding. Nil

This blouse was made by Annie Beryl Mathieson from silk material which came originally from China via family relatives. Annie Beryl Mathieson, born in Western Australia in 1910, married John Harman in Nullawarre in 1939 and made the blouse which she wore under a navy costume for her 'going-away' outfit. They lived at Macarthur and Annie Beryl died in 1983. This blouse is of interest as an example of women's fashions in in the late 1930s and of handmade clothing in the same era.This is a cream silk blouse. It is gathered from the bust line with navy cotton embroidery on the upper section and it has a pointed collar with cream lace edging, small puffed sleeves with navy embroidery and an open neckline laced up with a navy cord. annie beryl harman, warrnambool history

Peace Time (1971) Navy CommodoreBlack Wool. Royal Australian Navy. Commodore Mess Jacket. Gold Lace Rank to both Lower Sleeves. Gold Buttons (8). Gold Thread Australia to both shoulders. Two Fob Pockets to Front. Black cotton lining. Pocket to left hand inside Australia to both shoulders. Inside left of jacket J.N.Crosthwaite. (John Nevil) C.G.C.F. Which is Commonwealth Clothing Factory. R.A.N. Which is. Royal Australian navy. Made in australia. Gold Circular Rosette 4.5cm dia. Width of Gold Laceing. 4.5cm. Two Jacket buttons Link with metal link. Black cotton lining in side. Lable to Collar C.G.C.F.uniform, royal australian navy, commodore

A complete replica uniform set of clothing and all items that were or could be worn by a first AIF soldier.Light horse brigade .1) Jacket, 100% wool with cotton lining. 7th Battalion AIF colour patches with a brass A signifying original ANZAC on both sleeves. Right sleeve has sergeant's stripes & 5 blue & 1 red chevron stripes. Left sleeve has 3 brass bars re WIA 3 times. Rising Sun badges on each collar & Australia badges on shoulder straps. Belted at waist. .2) Jodphurs, khaki corded wool. Brass button up fly. .3) Braces, red, white & blue oblique striped. .4) Hat, size 57, khaki Akubra with felt pugaree, leather chin strap, & blackened brass Rising Sun badge on upturned rim. .5) & .6) Puttees, pair, khaki wool felt with khaki cotton tapes. .7) & .8) Boots, pair, size L, tan coloured leather with dark brown leather laces, leather soles with metal reinforcing on heels..1) & .2) Makers labels. .4) Hat: Akubra, Made in Australia; On badge: Australian Commonwealth Military Forces. on hat: "5.7 Akubra Made in Australia"uniforms-army, costume - male footwear, costume - male headwear