Two metal tins of which one fits into the other. Larger tin has two handles, smaller tin has only one handle as the other has broken off.Smaller tin - D(arrow)D, IDtin, mess tin

Awarded to L.G. Donelan by the Shire of TowongMetal medallion, tarnished on face and rear.Face - FOR GOD, KING AND COUNTRY Back - SHIRE OF TOWONG For Honourable Service Rendered L.G. Donelan World War 1939 - 45l.g. donelan, towong

Metal Box, 5-sided, various sighting and other dials and attachments (including battery compartment)A. M. BUBBLE SEXTANT MARK IX 6B/151 No.15798/40 BRIT. PATS. 480112 490621 AND PENDING

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. shirt, australian armed forces, auscam cammo, uniform

WW II British Gun Sight 'Telescopic Bearing' Brass barrel with tops lens for sighting (missing lens cap on barrel) Originally on a circular metal base plate, most of which has been cut off(T)EL BEARING No 10 MK I (imprinted on underside of base plate; other inscriptions on base plate of original article missing from this item) ("T" missing as a result of base plate cutaway)

World War II Manufactured during WWIIDark brown rectangular stitched leather case with folding lid for a WWII 3 inch Mortar sight, Mk1, Lensatic. The folding lid has a leather strap and metal buckle to hold the lid closed. The leather case has a leather adjustable carrying strap with a metal buckle. Shaped leather covered wooden mounting supports are located inside the case. Leather covered padding is provided on the inside of the case lid.CASE 3 INCH stamped on case top. Other markings on the case top are illegible. White painted number 3 with a faded red background on the case lower front. White number 1.3 painted on case top.3 inch, mortor, wwii, australian defence forces, case, sight, leather

Box with fittings/padding inside for securing sextant (see Item 0172.1)Front Plate: 68/151 BUBBLE SEXTANT MK. IX No. 15708/40 INDEX CORRn. 0

Dark blue printed instructions on paper mounted on a buff coloured cardboard card.LAMPS, SIGNALLING DAYLIGHT, SHORT RANGE Lamp can be used either (1) on the spike and spike extension stuck in the ground or (2) in the hand if necessary, or (3) withe the adaptor provided on a standard helio stand. SIGHTING TUBE: It is important to see that the lamp is so aligned that the distant receiving station is at the centre of the cross slots and maintained in that position the whole time that signals are being sent. BULBS: when fitting a new bulb, insert the locating tongue on the washer to the front and push the stem right back in the slot. BATTERIES: The correct replacment unit for this set is 8 "S" cells connected "in series". Screw up both terminal nuts tightly, ans see thar all connectors are in position. NIGHT SIGNALLING: An adjustable screen is supplied for reducing the light and one of the colour discs should always be used in conjunction with it when signalling at night under enemy observation. KEY CONNECTIONS. Use the two-pin plug in No.1 socket as long as the light is good enough, then cahnge to No.2. This will greatly lengthen the life of bulb. Used bulbs and batteries should not be relaced in the box, but discarded and a fresh supply obtained. Get a copy of detailed instructions "How to Use" this signalling outfit. KEEP LENS, MIRROR, BULB AND FRONT GLASS CLEAN.instructions, lamp, signalling, daylight, short range

Patented by William Mills and known as 'Mills Bombs', these were first used in WW1 and were used by the British Army until 1972. Three models were made - No. 5, No. 23 and No. 36. The latter two could be fired from a rifle (with suitable attachments). Note that the casing is grooved to assist fragmentation. These grenades had a time delay fuse of 7 seconds initially but later a 4 second fuse was introduced. Upon explosion, its lethal range was approx. 90m but on hard ground it could be double that. Over 75 million were produced.Cast-iron 'pineapple' shaped anti-personnel grenade.

This is believed to be a period "reproduction" most likely made from a JEEP vehicle spring by Australian soldiers to sell as a souvenir. US soldiers were prime targets for this type of deception as they were known to pay a premium for "Japanese" samurai swords.Steel blade and wooden handleNone

Circa WWII type 92 Japanese steel helmetCirca WWII japanese type 92 steel helmetWWII Japanese steel helmet, Type 92, painted silver post-war. A five point star is soldered to the front. There are four small holes (two on either side) in the top of the helmet. A circular metal stud is located on either side of the helmet at the rear. Three liner mounting attachment points are located on the inside rim of the helmet. The rim of the helmet is cracked in two places.helmet, japanese, headgear

Identification plate is for the Royal Australian Mechanical and Electrical engineers (RAME), 3rd Military District, vehicle number 743.Vehicle identification plate used by the Australian Army.Small square shaped steel metal plate. Khaki coloured paint on rear face. Blue, yelow and red horizontal painted stripes on the front face. White coloured numbers with a narrow horizontal white line painted on front face. Small hole drilled through the plate on the top.Horizontal blue, yelow and red horizontal stripes. Number 3 on top of a narrow horizontal white line with the numbers 743 underneath.vehicle, identification, plate, rame, 3rd military district

Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters

Steel scabbard for 182.1Nil

Steel Bayonet for the Australian 7.62mm SLR Rounded fuller (hence L1A2 - not the very similar L1A1)Nil

Appears to be part of sighting telescope for artillery. Further ID information has been sought from various sources, in including the Royal Australian Artillery History Company. The RAAHC have been most cooperative and interested in attempting to identify the equipment of which this item is a part, but with no firm details on its use or history at the time of cataloguing. Detailed communication between RAAHC and MERSL are available from the latter.Off-centre ring part way along barrel has engravings for elevation (?), ranging from 57 to 69 (see 4th picture above). Actual numbers engraved are 57 63 69, with small engravings to mark each degree between these intervals.

Wood-encased telephone (aluminium-reinforced edging strips) in leather carrying case. Hinged lid mostly aluminium (some wooden trim). (Missing from original: Metal dividers/calipers should be held by the leather strips on front of case).Metal instruction plate inside lid - shows wiring diagram with instructions in Japanese. Serial No. (Front of wooden box): 146112 (other inscriptions in Japanese)

Leather case for Dial Sight for 15 pounder field gun (Case only; Dial sight not present) D^D CASE NO. 107 (AUST) NO. ... DIAL SIGHT (No. obscured by scratch in leather) F.S. 1942

Standard M1 helmet with liner. Photo 0188b shows inside helmet with liner removed. Photos 0188d-f show liner onlyOnly markings are as in photos 0188a & 0188c.headgear, helmet

Used by Australian Army circa 1960s.Used by Australian Army circa 1960sUnpainted US style aluminium canteen formed by two seam welded halves (front and back sides) with an aluminium threaded top for attaching a top to the water canteen. The water canteen has a black plastic screw top lid attached to the neck by a metal link chain. The front of the water canteen is bowed outwards with the back being flat with a curved top doorway shaped indentation.australian army, water canteen, aluminium

The 11 Pound Practice Bomb was used in Australia to train air crews both during and after WW2. When the bomb hit the ground it produced a smoke cloud so that the aircrew could see where their bomb had landed. There was only a small explosive charge in them. Cylindrical, finned steel bomb weighing approx. 11lb painted silver with three stripes (blue, yellow, red) painted around the mid-section. One attachment point/loop. Cast iron nose. None.

The ordnance SBML two-inch mortar was a British-designed mortar used by the British and Commonwealth forces during the Second World War and later. It was more portable than larger mortars and had greater range and firepower than rifle grenades. It could launch a 960g High-explosive bomb to an effective range of 460m.Steel cylinder with six perforated tail vanes..

This round was fired by the QF 1 pounder gun known as the Pom-pom because of its distinctive sound when firing. It was the world's first automatic cannon and was used by many different countries. It achieved notoriety when used by the Boers in the South African War 1899 - 1902.Brass case and iron pom-pom projectile.V S & M

Used by Australian Army circa 1960sFelt lined khaki green stitched water canteen cover with two metal press studs on the top front of the cover used for attaching the top to the front. There are four stitched lines on the front of the cover from the top to the bottom. The cover has stitched reinforcement around its top opening. A metal belt loop attached is stitched to the back of the cover with webbing.cover, canteen, khaki, australian army

Shell for the Cannone da 75/46 C.A. modello 34. This gun fired a 6.5kg shell to an effective range/height 8,500 metres. Australians encountered these weapons in North Africa from 1941 to 1942. Brass shell with cast iron projectile.S M I 14-6-39 L.7 U.T.A.N FIRENZEworld war two, ww2, second world war, italian, north africa, north africa campaign, cannone da 75/46 c.a. modello 34, 75mm anti-aircraft round

The Bofors gun (which fired this round) was designed in the 1930s by AB Bofors, a Swedish arms manufacturer. It proved to be one of the most successful light anti-aircraft guns used during World War II. Apart from being used by most of the Allied forces, captured guns were used by the Germans and Japanese. The Bofors had a rate of fire between 80 - 100 rounds per minute when hand-loaded via 4-round clips. Effective maximum range was approx. 3,800m. On land, the guns were mounted singly on numerous types of chassis whilst Naval guns were either single or dual mountings. A few countries still use the Bofors Gun to this day.Brass case with iron/steel projectile

In 1970 the US M29 81mm mortar replaced the British 3-inch mortar which had been used by Australian forces since WW2 .The Australian designation is F2 81mm Mortar. It remains in use today. Maximum range is approx. 3,600m with the 4.27kg M362A1 projectile. Effective bursting area is approx. 34m in diameter.81mm Mortar bomb of steel and cast-iron construction with 6 tail vanes. The example shown here is a High Explosive bomb with a dummy fuse.Dummy Fuse A66 81mm 362A1 N63(4 H.E.S 1-HX-7-L&S/V- 66-M141mortar

Vietnam era Australian Army backpackVietnam era Australian Army backpackAustralian Army Vietnam era khaki green multi compartment canvas with cotton/polyester adjustable webbing and metal buckle securing straps. The backpack has two main compartments located at the top and bottom, with two smallèr comparments located either side of the top. The back pack has a hard plastic insert at the back, with two padded shoulder carrying straps. Two padded strips are located on the rear of the backpack. Two adjustable webbing and metal buckle straps secure the top compartment. Three adjustable webbing and metal buckle straps secure the bottom compartment. A wide webbing with multiple insert metal eyelets is stiched across the middle front of the back pack, two across the side at the top, and one across the top flap. The top flap has a webbing strap handle, a stiched clear plastic identification compartment, and two reinforced stiched slits on either side of the rear of the flap.1973 is printed on the rear of the backpack.vietnam, australian army, backpack

Glass framed photo of the HMAS Maryborough insignia. Naval gold coloured crown with blue, red and green jewel inserts located above a gold coloured plaque. The plaque has a gold coloured edge with a gold coloured pig on a blue background on the left, a picture of a building with a frame tower on a red background located on the right, and a picture of trees on a white background located on the bottom. At the bottom of the picture is a gold edged blue ribbon with the words HMAS Maryborough in gold lettering.

Model of the ship served on by W Thomson during WWII.Scale model of the HMAS Maryborough that was operated by the Australian Navy during WWII.Grey and black painted plastic and wood scale model of the Bathurst class HMAS Maryborough (1940 to 1946) minesweeper (commonly known as corvettes) mounted in a wooden frame glass sided and top case. It has cotton rigging with metal anchor chains. An inscribed metal plate is located on the front glass side. The upper of the model is painted grey, and the bottom black. J195 is painted in black lettering on the bow of the model.J195 H.M.A.S Maryborough 1940 - 1946 Made by W. Thomsonmodel, hmas maryborough, bathurst class, minesweeper, corvette