Pro (Kevin Charles) HART (30 May 1928 – 28 March 2006) Born Broken Hill, New South Wales Pro Hart drew upon a variety of techniques in his paintings, including layering, chiaroscuro, glazing, scumbling, scratching and Alla prima. Insects, particularly ants and dragonflies, are among Hart’s most popular and most identifiable images. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Etched bookplate featuring ants. This is the only etched Bookplate Pro Hart created, and one of only two Ex Libris designs created by the artist. It was made in Broken Hill, New South Wales in 1999 for his friend Robert Littlewood. Printed on fine art paper in the intaglio method directly from the original copper plate. The plate was needled by the artist using a make-shift tool cut from mild steel. This Bookplate is the subject of a small Private Press book written by Professor Karal Ann Marling (retired), of the University of Minnesota, to be published by The Lytlewode Press, 2010.pro hart, ex libris, bookplate, robert littlewood, keith wingrove memorial trust, ant

Neale McSWAIN Neale McSwain was a student at the Ballarat College of Advanced Education (now Federation University) in 1986. The art acquisition prize for student work was awarded to Neale McSwain in 1986. This is the first time that the award was made for a sculpture. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.Tall, red, steel sculpture. art, artwork, neale mcswain, mcswain, sculpture, ballarat college of advanced education, alumni

Betty Collier (nee Thege) was a student of the Ballarat Technical Art School, and lectured in Sculpture at the University of Ballarat, both predecessor institutions of Federation University Australia. This work was requested for the collection by Brian McLennan. This item is part of the Federation University Art Collection. The Art Collection features over @000 works and was listed as a 'Ballarat Treasure' in 2007.A large oxy welded sheet steel reclining kangaroo.art, artwork, betty collier, collier, kangaroo, sculpture

Peter BLIZZARD (1940 — 2010) Sculptor Peter Blizzard completed a certificate of art at the Prahran College of Advanced Education and a Diploma of Art at RMIT in 1967. His sculptural career start in 1970 after a career as a graphic designer, creating large steel abstract works. He exhibited at several International Trade Fairs including New York and San Francisco in 1970, as well as Isogaya Gallery in Tokyo in 1997. Between 1972 and 1995 was Lecturer, Senior Lecturer, and Head of Sculpture at the University of Ballarat (now Federation University). From 1995 he worked full time as a sculptor. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Abstract ArtA steel sculptureart, artwork, peter blizzard, sculpture

Rohan Robinson is an artist born in Geelong, and attended “the Mill” part of Deakin University in 1980-82, studying Fine Art. In 2010-11, he was the manager of Kayili Artists Aboriginal Corporation, at Patjarr in the Gibson Desert W.A., where he oversaw the development and marketing of artworks of the corporation’s members. The community is the remotest in Australia and averaged 25 people, mostly consisting of elderly people and part of the Ngaanyatjarra region, with some members not having any consistent contact with white fellas up to the mid 1960’s. During his time it was common for all the community members to go out hunting and having a visit to important areas, where members would get some tucker of rabbits and lizards and honey ants and perhaps some “meow meow” and have a nice sleep in the shade on the warm sand. Robinson would often take his painting gear along and do some work on unstretched linen on the desert ground, he would paint for a while and then perhaps lie around with the elders or follow one of the expert hunters and observe from a distance [several meters] the skills of elderly women casually walking through some recently burned spinifex knocking cowering bunnies on the head with a steel rod. It was on one of these occasions, when this particular painting was being conceived, that after returning from the hunting mission, he was informed by some of the mob, that an elder had been spending time looking at this work in it’s infantile stage...”You know the old fella over there, he been looking at that painting of yours” It was later in the day, when returning to Patjarr, that the elder Arthur Robertson approached Robinson, and demanded/asked that Robinson paint his stories for him. Mr Robertson was suffering from Parkinson’s disease, and was having trouble painting, but had been doing some brilliant work with Posca markers. It was with a certain reluctance that Robinson agreed, as he felt this to be a “political hot potato in some quarters” but also respected a relationship between artists beyond the cultural divide. Mr Robertson demanded that they start immediately and armed with pencil and paper they created the notes for several paintings under Mr Robertson’s direction. The painting that you are viewing is signifcant in that it was the catalyst for this relationship between the two artists. Mr Arthur Robertson died later that year 2011.Gold framed blue and earth tone painting. Painting depicting four circles with mountain and sky in the background.

'The distinctive lyrebird firescreen has become a popular feature of the lounge. It is not known how long it has stood in this position, but it appears to have been custom-made for the fireplace. Firescreens are not clearly shown in early photographs. It is popularly believed that the fenders on the floor..came from the Victorian Railways workshops and were made from railway line metal..' (Pg 72 Historica. 2011) "In 1924 amateur naturalist and mountain-guide, Alice Manfield (18-78 -1960) popularly known as Guide Alice, released 'The Lyre-birds of Mount Buffalo', a 23 page booklet detailing her studies into the lyre-birds on Mount Buffalo, the first pictorial record of lyre-birds to be published.... It is not known whether the lyrebird fire screen in the Chalet Lounge was dedicated to Alice Manfield and her study into local lyrebirds, but this popular feature is a most appropriate tribute." (Pg 132 Historica,2011) Listed in Draft Inventory of Significant Collection Items . 1. Forged and beaten steel firescreen. opens in the centre and is closed with two latches. One lyre bird design on each side. Heavy mesh with scrolling work. Attached to fireplace. 2. Poker is forged steel with a knob on one end and a hook on the other.

Used in the 20h century.A pair of vintage hand horse clippers with two steel blades, a lower blade or comb and a moving blade or cutter that work together to cut the hair. It attached with screws to two steel handles with wooden grips attached by brass fitments.Imprinted on the metal joining the blades - 'A. Martin & Co. Manufacturers'horse accessories, horses, horse clippers

Farming tool for moving hay in sheds, paddocks and stablesObject holds farming significance sold by Holden and FrostWooden handled three steel pronged pitch fork primarily for agricultural workfork, farming

Shoe knife used for leather work ca1910Shoe knife used for leather work ca1910 Damascus steel shoe knife with rosewood handle George Barnsley Damascus steelknife, leather, shoe knife

A steel curved bladed woodworking tool with two wooden handles used to remove thin slices and big chunks of wood from timber. It can be used to fashion wooden sculptures, debarking trees and trimming beams. The final finishing on such work was done by a Spoke Shave tool which we also have in our collection.ROBT SORBY AUS STEELwoodcarving tools, drawing knives, shaves, handtools, steel, wood, woodworking tools

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Supplement to the Argus. Described as "Australia's first completely aid-conditioned, all-steel, streamlined train for the Melbourne-Albury section of the Sydney Limited service., Victoria. Constructed at the Railway Shops, Newport, Victoria, it is a splendid tribute to the excellence of the work of Australian craftsmen". "Spirit of Progress" entered service on Tuesday 23 November 1937.railways wodonga, fred rochow, wodonga railwaymen, spirit of progress

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 25. Work proceeding inside the Coffer Dam. This shows the curving downstream face of the Spillway section taking shape, the bottom edge being the line of the contraction joint between the wall and the energy dissipater which has still to be built. Note the steam navvy at the end of the bit of curved work ready to take out the foundations for the energy dissipater. The tall concrete pillar is a portion of the work at the intersection of the main and south wing walls which was built in advance of the rest of the work to accommodate the tail tower of the cableway. The Tail Tower for the first stages of the work stood on the ground. Part of it is seen erected on the pillar while part of it is still in its original position. To command the concreting of the pillar end of the south wing wall a twin hoist tower of steel construction was erected at the end of the belt conveyor. This hoist is 160 feet high. The belt conveyor will at a later stage be raised for the concreting of the upper portion of the dam and the trestles are now being built up for that purpose. A drag line excavator with a 2 cubic yard capacity bucket is at work near the tail tower on the foundations for the south wing wall. New South Wales, August 1927.hume reservoir australia, river murray waters scheme, hume reservoir construction

The sculpture is of welded 3mm oxidised mild steel fabricated into six rectangular blocks of unequal size, joined along the edges by welding and juxtaposition at various angles. The work is classified by The National Trust of Australia (Victoria) and was funded by the Visual Arts Board of the Australia Council for the Arts. The sculpture is an example of a classic formalist work by one of the early practitioners of the style in Australia.The sculpture is of welded 3mm oxidized mild steel fabricated into six rectangular blocks of unequal size, joined along edges by welding and juxtaposition at various angles. It is supported by one angle bracket, and several short lengths of reinforcing steel sunk into the pavement and tack welded to the sculpture. It has an overall length of 3.25 metres, a height of 2 metres and width of 1.45 metres.

Record shows the condition of the rail head at many points throughout the Ballarat system. Gives the type of rail, its weight, gauge, location and date of measurement See item 9127 for a report on the Special Work. Some sections measured in May 1954, rest May 1955Demonstrates a detailed report into the condition and wear of the Ballarat Tramways trackwork in 1954/1955.Report - within a manila card folder with steel clips containing about 44 drawings on drawing paper of rail sections.Outside cover in ink "Legend Track Gauges"ballarat, secv, trackwork, rails, reports

Item used on the Victorian Railways Sandringham - Black Rock tram line for the short section of the single track of the line between the railway station in Station Street and the depot entrance in Bay Road. Tram drivers were required to carry this to prevent a head-on collision on the single-line section. Image 3 shows the driver placing the item in the "staff box" outside the depot. Image from the DVD "VR Tramways in the 1950s", with permission from Effectch the Producer. The Newport Railway Museum holds the other staffs for this line along with a damaged one (or two) for the same section - see photo 4 for the Black Rock to Beaumaris Section.Demonstrates an item used to safely work trams on the Sandringham - Black Rock - Beaumaris tram line.Two sections of steel intermeshed to form a cross and stamped.Stamped "No. 1 Section" and "Sandringham - Staff Box"trams, tramways, safeworking, sandringham, section staff

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in gold finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "91" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ See Reg Item 395 for another example.trams, tramways, badges, inspectors, mmtb

Work started on the Lauriston Reservoir in 1939 as part of the Coliban water system and was officially opened by Victorian Premier, Albert Dunstan in 1941. Capacity was increased in 1946 when steel spillway gates were added. Although these had been part of the original design they could not be added at the time of the building because of post-war steel shortages.Bendigo Advertiser ''The way we were'' from 2003. on tour: school of mines civil engineering students visit the construction site of the Lauriston Reservoir in 1940. Left to right: Les Nankervis, Ron Watts, instructor Syd Power, an unknown student and Cliff Binks. The clip is in a folder.newspaper, bendigo advertiser, the way we were

See Item 11000.189Photograph of Hanro Knitting Room: On cream card with a silver border with *Bartlett Bros., Bendigo* as the photographers printed in brown ink. The photo is of the knitting rooms showing the machinery with spools of thread in work. The room is a large open space with Steel girders at the top with industrial lighting. The room has numerous knitting machines. The back has tape down the left hand side and hand written in black ink is *Part of Knitting Room* on the top right. Box 116ABartlett Bros., Bendigo.photograph, building, hanro, bartlett bros., bendigo

BHS CollectionDrawings of the Erection of the Hanro Knitting Mills: In a binder made of pieces of brown cardboard top, bottom and spine joined together with white cotton ribbon to form the binder. On the front is a number on a white sticker in black biro * D1710* on the right hand top. In the centre top is the blue circular Royal Historical society of Victoria. Bendigo Branch. Underneath that, hand written script in black ink is *Hanro 'Aust. Bendigo Knitting Mills Pty. Ltd. Drawings in connection with the erection of New Mills* and a small star drawn in black ink. At the right bottom is *William Rockli C.E. Melbourne. On the spine is *Drawings in connection with the Erection of New Mill*. The spine has had a 7cm piece torn off. Inside the front is a white sheet of paper glued to the cover. Its title underlined *List of Drawings Job No. 37. 'Hanro' Aust. Bendigo Knitting Mills Pty. Ltd.* Drawings No 8-34 and 1 copy Tender, *Specifications and General Conditions for Steel Roof Construction*. Plus 1 copy Tender, *Specifications and General Conditions for Excavation, Brick Work and Concrete*. The Report in a brown paper folder with four metal pins for attaching hand written in black script. * A Report in connection with Establishing Dyeing Plant*. At the bottom is *William Rockli C.E. Melbourne. Two brown paper folders are as follows:- The first is *Tender, Specifications and General Conditions for Excavation, Concrete Work and Brick Work, under that is a black star. The second *Tender, Specifications and General Conditions for Steel Roof Construction, a black star on the front page as well., Both have four metal pins to secure. Box 116BWilliam Rockli C.E. Melbournebendigo, industry, hanro knitting mill, hanro. constructions drawings. tender documents.

Has reference to the MTA (Metropolitan Transport Authority), lists of Union Officers, delegates, Do's and Don't's. Has many advertisements for organisations throughout the book, including Slater and Gordon, BHP steel and Tramways Benefit Society. Gives information on pay rates, awards, gratuity payments and working conditions.Yields information about the ATOMEA and the awards that crews worked under in 1984 and 1985Booklet - blue card covers with an image of an articulated tram and a bus, 36 pages, centre stapled, titled "Handbook of Award, Long Service Leave and & Workers Compensation 1984-85". tramways, melbourne, atomea, awards, unions, workplace conditions, workers compensation, annual leave, the met, mta

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "5" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ Badge was used by the Donor as part of his work uniform. See Reg Item 6010 for another example.trams, tramways, badges, inspectors, mmtb

Albert Richardson was a mining historian who wrote widely on the mines of the Bendigo Goldfield. The park opposite the Goldmines Hotel in Marong Road, is named in his honour. Five page document, hand written by Albert Richardson on lined foolscap and edited with cross-outs and insertions, . The mines along the Hustlers line of reef and the Sheepshead line of reef are described. Mines listed on Hustlers line of reef: Fortuna Hustlers (1888 - 1913), shaft 2,240 feet at rear of Buckell and Jeffrey's offices; Royal Hustlers Reserve No. 2 - two shafts 'City" 860 feet, now covered by R.S.L. building Pall Mall, steel poppet legs 60 ft high and 'Park Shaft" at rear of Camp Hill School, 1,775 feet, steel poppet legs 60 feet high; Hustlers Hill Group first worked by Jonathan Harris in 1853 and bounded by Valentine, Anderson and Ironbark Creek to the north and Milroy Street to the east, one of first areas worked for quartz reefing. It with Garden Gully line west and Victoria Hill Ironbark, formed by far the richest cross section of the Bendigo Goldfield. Great Extended Hustlers (1865-1921) close to intersection of Anderson Street and Hustlers Road, mullock heap against road and shored up around shaft, steel poppet legs now at Wattle Gully mine, Chewton, large winding machine, air compressor south of shaft and 36 head crushing battery. Hustlers Reef (Old Hustlers) and Hustlers Reef No. 1, two shafts, main 2,210 feet, about 220 yards east of Moran Street and against Fenton Street. , No. 1 shaft 1,140 feet and about 155 yards east of Moran Street. Lansell's Comet, Lightining Hill line, 2.100 feet, on Comet Hill approx 70 yards west of Holmes Road, near Comet Creek, steel poppet legs. United Hustlers and Redan (1876-1918), main Redan, 1,830 feet about 155 yards west of Sandhurst Roead, in line with Comet Hill State School, this hill known as Redan Hill. North, or New Hustlers, once known as Agnew Hustlers, wooden poppet legs, south side, Kneebone Street, Eaglehawk. Derby line, Johnson's No. 3, South Johnson's (east shaft of Collman and Tacchi) 439 feet on west wide of Woods Street, south of Wetherall Street. Paddy's Gully Line, south to north, some shafts - Lansell's 'Sandhurst" ('Needle") Eaglehawk Road shaft 2,425 feet, about 50 yards east of Needle Loops, a brick square sided chimney with Cleopatra Needle top. British American, 789 feet, just south of Holdsworth Road. Collman and Tacchi, main shaft 2,588 feet, 60 yards west of Eaglehawk Road, California Gully. Deborah Line of Reef, The Deborah (1932-1954) shaft 2.017 feet, west of Adams Road and south of Abel Street, Quarry Hill. North Deborah (1937 - 1954) shaft 1,151 feet, Breen Street, Quarry Hill, steel poppet legs. Central Deborah (1939-1954) shaft 1,347 feet Sheepshead line of reef, Lansell's South Red, White and Blue, shaft 2,124 feet, north east of Bellevue Road and 220 yards east of Adams Road. The New Red, White and Blue Consolidated (Big Blue) main shaft 2,416 feet. Lansell's Bendigo Battery 105 head, north of 'Big Blue" on his freehold lease, commenced crushing on 24th February 1895. After closing was erected as the Showground's Industrial Hall, July 1926. North Red, White and Blue, burnt down February 1926, new company 1934, closed 1938. Document is part of the Albert Richardson Collection of Bendigo mining history. bendigo, gold mining, deborah line of reef, sheepshead line of reef, hustlers line of reef, royal hustlers reserve mine, hustlers hill group of mines, great extended hustlers, hustlers reef no. 1, lightning hill line, old comet, collman and tacchi, lansell's comet, north deborah, central deborah, dhrrpdhrsf linr og trrg, new red, white and blue consolidated mine, big blue, lansell's bendigo battery, north red, white and blue mine, albert richardson collection

In the 19th century, the Industrial Revolution meant that shipbuilders could build ships using iron. These iron ships could be much larger, with more space for cargo and they didn't need as much work to keep them in good condition. Isambard Kingdom Brunel's "Great Britain" built in 1843, was the first ship to be built entirely of wrought iron. In the 1880's steel began to be used instead of iron. Ships also began to be fitted with steam engines although a great deal of coal was needed to travel even short distances. For this reason, ships continued to be fitted out with sails even though many came with engines. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. This particular artefact was one of many found by John Laidlaw (a local Warrnambool diver) when diving on the Falls of Halladale in the 1960's. In August 1973, John Laidlaw and Stan McPhee went on to discover the underwater location of the Schomberg - a passenger ship that ran aground on December 26th 1855 near Peterborough and which now lies in 825 metres of water. When John Laidlaw died, his family donated a number of artefacts to Flagstaff Hill. The brass finial may have been part of a larger decorative item such as a lamp or clock bracket.This item is significant as it was taken from the Falls of Halladale shipwreck which is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976)A brass, bell shaped object with a body approximately 3 cm high. It has an outer lip, straight sides that taper in and a flat "cap". The inside of the object is plain with evidence of vertigris. It has a decorative topping almost 2 cm high which has a double concave hollow neck.flagstaff hill, flagstaff hill divers, flagstaff hill maritime museum and village, great ocean road, warrnambool, falls of halladale, falls of halladale wreck, shipwreck artefact, artefact, brass artefact, brass finial, brass fitting, shipwreck coast, diver, john laidlaw, finial, brass decoration, handmade

Land, bordered by Brougham, Havlin and Mundy Street was purchased in 1911 and the distillery onsite was modified to suit the needs of the Rosella Company. Renovations and additions, including a 21 metre high steel chimney, were completed in time for the 1911/12 tomato season. First manager was Owen WIlliams (1883-1948), a Welshman. He was married to Amy Price (1882-1949). Full history available "Bendigo's once flourishing tomato industry" by James A Lerk. Item 5985sepia photograph. Interior at workshop - anvil at back left., centre, drum standing on bench, used as small furnace ? Portion of man wearing work apron at back right. On back in ball point pen 'Rosella Preserving Factory, Brougham St. 'organization, business, rosella factory

Stations of the Cross by Clifton Pugh is a contempooray art piece in four sections making up 11 stations of the cross. It was commissioned by the Catholic parish in Eltham (Our Lady Help of Christians) in 1961 Published: Nillumbik Now and Then /​ Marguerite Marshall 2008; photographs Alan King with Marguerite Marshall.; p81 Art is an important means of nurturing faith at Our Lady Help of Christians Church, Henry Street, Eltham. The Stations of the Cross by Clifton Pugh and The Crucifix with the Ascending Jesus by sculptor Charles Rocco are two of the fine works that enhance the parishioners’ worship. These two inspiring works of art were added in 2001 – long after Roman Catholics began worshipping in Eltham around 1864. This beautiful worship centre was built following hardship and change – for parishioners have endured their church being destroyed by fire and have built four churches since they first worshipped together. Before 1864, according to local legend, a visiting priest administered sacraments in the parlour of former convict-turned-respected citizen Thomas Sweeney at Sweeneys Lane, Eltham.1 The first church was blessed in September, 1865, by the Archbishop of Melbourne, Dr Goold. It stood on an acre (0.4ha) of land in Little Eltham as that area was known then, near the present Fordhams and Main Roads and was part of the Heidelberg Church Parish. In 1912 the church was relocated to a new building on the present primary school site at 1 Henry Street. This was closer to the town centre, which had moved from Little Eltham after the railway line was extended to Eltham in 1902.2 In 1958 the church split from the Sacred Heart parish, Diamond Creek, to become a parish in its own right, with Father Tom Curran as inaugural priest. Not long after in 1961, a fire destroyed the church and huge working bees under the prominent Catholic builders, the Sibbel brothers, rebuilt and extended it, using the original altar from the first church. It was then that builder and parishioner Herman Sibbel asked his friend, artist Clifton Pugh, to paint the Stations of the Cross for the church. But the priest, Father Curran, neither approved of Pugh’s bohemian reputation nor liked the paintings, so they were hung in the corridor of Our Lady’s Primary School instead. The parishioners almost sold the paintings in 1989 to pay for major school renovations. However the paintings remained there for about 40 years, until 2001, when the church was extensively renovated by Father Barry Caldwell. Another change awaited the church, as it outgrew its building, later to be used as the school hall. So, in 1976, the present church was built across the road. Three beautiful stained-glass windows depicting the Passion, Death, Resurrection and the presence of Christ’s Spirit, link these with the church’s experiences. The first depicts a bushfire in Eltham, referring to their church damaged by fire. Another represents the Resurrection of Christ with new growth on a blackened stump and the Holy Spirit is represented by the Southern Cross. A window depicting Our Lady Help of Christians by parishioner Bill Peperkamp, was donated by parishioners to commemorate the Silver Jubilee of Father Desmond G Jenkins’ ordination to the priesthood on July 27, 1977. This, with the statue of Mary, creates a Marian shrine. In the 14 Stations of the Cross painted on four masonite panels Pugh captures the pathos of the suffering Christ and his disciples.3 The figures are stylised, except intriguingly, that of Pontias Pilate, who looks like Clifton Pugh. Charles Rocco’s sculpture is an extraordinary Jesus figure being raised from the Cross. The delicate stainless steel mesh of the figure creates a sense of the power of God over death. The organ, built in 1868 by George Fincham and Sons, was first installed in the All Saints’ Anglican Church, East St Kilda, then in the St Andrews Church, Clifton Hill. It was rebuilt into a modern instrument with a donation from parishioner Jim Murray, in memory of his wife Gwendolene Mary.4 Church members created their own work of art in front of the entrance, by painting designs and messages on 700 tiles. This work indicates the strong church family and faith expressed in art, that awaits the worshipper inside.This collection of almost 130 photos about places and people within the Shire of Nillumbik, an urban and rural municipality in Melbourne's north, contributes to an understanding of the history of the Shire. Published in 2008 immediately prior to the Black Saturday bushfires of February 7, 2009, it documents sites that were impacted, and in some cases destroyed by the fires. It includes photographs taken especially for the publication, creating a unique time capsule representing the Shire in the early 21st century. It remains the most recent comprehenesive publication devoted to the Shire's history connecting local residents to the past. nillumbik now and then (marshall-king) collection, art, clifton pugh, stations of the cross, our lady help of christans, installation

Used by the MMTB in an attempt to keep tram tracks clear of motor cars. It seldom worked. Signs would have been fixed to the ends of a tram so it could be seen by motorists. See Item 6088 for another version.Demonstrates the methods the MMTB to ask motorists to keep tram tracks clear during the 1950's and 1960's.Sign - Zincalume steel sheet, with four holes in angled or trimmed corners asking "Motorists Please Keep Off Tram Tracks" Has the image of a motor car on the tram tracks with the outline of a tram following.tram stop, signs, mmtb, traffic control, trams, tramways