Lou's Cafe c. 1987. In the 1930s and early 40's it was Riches Cafe and Billiards Saloon. Sold to Halligan's, Duggans, Jerry Cowell until 1951 when Luths took over the building as a Car and Tractor agency. Next door was Bennett's Shoe Repair Shop which was later a Stock & Station Agency. Part of a streetscape series done for the Shire of Charlton c. 1987.Colour photograph of a single storey building. Signage on the windows reads Lou's CAFE and on the awning Lou's MILK Bar. Other signs on the windows read Fresh Fruit VEGS, meals, TAKE AWAY FOOD, FISH & CHIPS, HAMBURGERS. Signs above the awning advertise Pauls Streets and Peters ice creams. Two cars parked in front of shop and a man and a woman are standing beside one of the cars. Drive way to the left of the cafe and a single storey, glass fronted building is on the LH side of the photo. Signs on the windows read Crafts, Haberdashery, Gifts and BAGGAGE. To the right of the cafe is a yellow-green fence.lou's cafe, riches cafe and billiard saloon, halligan, duggan, jerry cowell, business

The photograph shows a cable tram set being towed out of a car depot or car house by a tractor, North Fitzroy Nicholson St depot. The grip is in the raised position, with the gripman's hands on the brake levers. The conductor is waiting to pull the pin that secures the tow bar. The tram has the destination of Spencer St. Photo late 1930s or 1940. Note the Bundy clock on the depot wall.Yields information about towing a cable tram out of a car house probably shortly before closure of the cable tram system in 1940.Black and White photograph - printed on plain paper.On the rear has the Copyright stamp of The Age and pencil number "KM-M-007", Ken Magor stamp, "tram being towed out of depot" and number 4838.cable trams, tractor, towing cable tram, car house, north fitzroy depot

Used in the 1930s in the Forests Commission's Erica Forest District by a rigger for cutting the top off spar trees to be used in high-lead logging. The advent of crawler tractors after the Second World War brought about the end of high-lead logging. The saw was adopted in the 1940s by the-then Assistant Forester of Erica (James McKinty) for cutting firewood for domestic purposes; this use continued until about 1987. One-person cross cut saw with riveted handleforests commission victoria (fcv), hand tools

Copy of a newspaper article titled three-year battle to get lights printed on yellow paper. Date written at the top is September 19 - 1984.Photo shows Eaglehawk Rd with a man crossing the street and a car going past. A tractor is on the corner. The accompanying article mentions that residents have been campaigning to get the lights for over three years.bendigo, history, long gully history group, the long gully history group - installation of traffic lights eaglehawk rd/creeth st, long gully primary school, the road construction authority, ted coleman, bendigo city council, rite-way

Black and white photograph, of the unloading of the body of Horse Tram No. 1 at the rear of the depot, on Fri. 13 December 1985. Garry Wood assisting with the body, Barry James tractor crane. Body is being positioned onto the remains of a ex Melbourne cable tram truck, just to the right of the photo. See also item 736 for vertical format photo.On rear of photo: Black ink on top of photo "Swinging No. 1's body onto cable trailer 88's unrebuilt truck / 13.12.85". On bottom edge "Dave Macartney" Pasted in the middle of the photo is a printed caption, same words as for top line, but with date detailed out.trams, tramways, horse tram no. 1, btps, tramcars, unloading trams , tram 1

White page for an auction sale of Surplus Equipment at the South Costerfield Gold Mine, Costerfield on 1/4/1954. For sale was an Electric Winder, Caterpillar D.2 tractor, with Hydraulic Blade, Prest Air Compressor, 10 h.p. Elect. Motor, Reduction Gearbox and a Diesel Engine. J. H. Curnow & Son Pty. Ltd. were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - south costerfield gold mine, j h curnow & son pty ltd

Also another copy 13 x 20cm, good conditionBlack and white photograph of three men working on original wooden piers at the entrance to Bass Strait. Rail tractor built by J A Day and Son especially for New Works project, powered by dredge car engine, pulled three rail trucks loaded with rocks to reinforce original wooden piers. Three men not identified. Lakes Entrance Victoria public works, construction

Likely used in the early to mid-20th century for pouring petrol from large fuel tins into vehicle tanks or smaller containers. The design suggests it was a utilitarian tool for garages, farms, or early motoring enthusiasts. The screw-thread and frame indicate it was meant to be secured to a canister to prevent spills and ensure steady pouring.A vintage metal petrol pourer with a spout designed for controlled fuel pouring. The main body consists of a curved metal pipe leading to a nozzle. A screw-threaded metal fitting is attached near the spout, likely for securing it to a fuel can. A metal plate with a pointed tip is part of the assembly, possibly for piercing or securing into a container. A rectangular wire frame extends from the main body, likely for stability or support while pouring.petrol, gas, kerosene, fuel, can, container, farm equipment, motoring, vehicles, tractors

Circa late 1800's to early 1900s. A horse-drawn furrow plough was the most common type of agricultural implement used by the pioneer market gardeners, in Moorabbin Shire, of the 1800s and continued on into the 1940s when motorised tractors came into use. This plough is an example of a single-mullboard plough which would have been pulled by horse. The long handle was used to lower the silver plate, (mullboard), to the chosen depth of soil. Following 'Dendy's Special Survey' of 1841 and the Crown Land Sale in 1852, land allotments were bought by pioneer settlers who established or rented allotments for market gardens in the area and they supplied produce to the markets in St Kilda and Melbourne. During the gold-rush of the 1850s the rapidly increasing population of Melbourne saw a huge demand and a rise in prices for all foodstuffs, including the vegetables and fruit grown in the Shire of Moorabbin. An "Oliver" single mull-board plough in good condition with faded manufactures markings on shaftsPainted on shaft "MANF'D BY/OLIVER CHILLED PLOW WORKS/Southend Ind. USA/" Engraved on blade " 13 OLIVER"brighton, moorabbin, plough, dendy henry, east bentleigh, market gardens, horse drawn plough, plow, mullboard

This is a book made by Army School of Transport. The cover is a thin cardboard, coloured brown. Printing is in black ink. In the centre is a form of shield. On top is a banner with words "Army School of. At the bottom is the word "Transport". It has approx 44 pages of black and white photos and specifications of equipment. i.e. Aircraft, Trucks, APC road rovers, Trailers, Tractors, Graders, Water Craft etc.passchendaele barracks trust, transport, planning, equipment specs

Small grey covered auction catalogue for a sale of Surplus Machinery situated at Blue Tier, Lottah and at Derwent Bridge Construction Works by order of Wedd's Machinery Agency. Auctioneers J. H. Curnow & Sons. Machinery offered included mining machinery, electric motors, pumps, tools, spare parts and a tractor. Most of the lots have the sale price written beside them.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - tasmanian surplus machinery, j h curnow & son, wedd's machinery agnecy hobart, derwent bridge construction works, c j curnow, h j lowe, f c dyett, j l jamieson & co, w g wedd, mercury press

NRT1 - Ruston & Hornsby Diesel Locomotive Built in 1951 to a gauge of 3', this Ruston diesel locomotive or rail tractor operated on the State Electricity Commission of Victoria’s Kiewa scheme. Some years later, it was regauged to 2'6" and was operated by the Melbourne & Metropolitan Board of Works. NRT1 is a Ruston & Hornsby diesel locomotive, built in England in 1951 to a gauge of 3 feet, and was initially employed by the State Electricity Commission of Victoria. It was later re-gauged to 2' 6" and ended it's working life in 1977 when it was transferred to Puffing Billy. In 1977, it was taken to the P.B.P.S. Steam Museum and stored until 1978 when it was taken to the Emerald Carriage Workshops. Later in 1983 it was returned to service as NRT1 following the V.R. classification procedure as a narrow-gauge rail tractor, but it had number plates installed and was painted Hawthorn green. It will eventually be painted the red of V.R. rail tractors with the number & class painted on in black. This type of locomotive was popular in many industrial locations, with their unique clutch-less 3 speed gearbox meaning the driver could control them whilst walking alongside, a bonus when shunting. Adjustable tie rods meant that as the axles moved on the springs, they followed the radius of the drive chains, reducing the chances of chain snatch LOCOMOTIVE DETAILS NRT class No. originally constructed : No. in service : 1 No. stored: Wheel arrangement : 0-4-0DM Roadworthy weight : 9T 3cwt. Maximum axle load : 4T 15cwt. Tractive effort (85%) : Length overall: 15' 6" Height overall: 10' Driving wheel diameter: 18" Date of manufacture: 1950 Manufacturer : Ruston Hornsby Place of manufacture: Lincoln, England Locomotive type : Diesel Mechanical Manufacturers classification : 48 DL Historic - Industrial narrow Gauge Railway - Ruston & Hornsby diesel locomotive used by State Electricity Commission of Victoria - NRT1 - Ruston & Hornsby Diesel Locomotive NRT1 - Ruston & Hornsby Diesel Locomotive made of steel NRT1 ruston & hornsby diesel locomotive, nrt1 diesel locomotive, nrt1, puffing billy

Black and white photograph, vertical format, of the unloading of the body of Horse Tram No. 1 at the rear of the depot, on Fri. 13 December 1985. Garry Wood assisting with the body, Barry James tractor crane. Body is being positioned onto the remains of a ex Melbourne cable tram truck, just to the right of the photo. Second copy of photograph added 6/8/2002 - 238H x 148W.On rear of copy 2 of photograph - "3" and "53%" in blue ink.trams, tramways, horse tram no. 1, btps, tramcars, unloading trams , tram 1

Bob Hymans Collection Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans died on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This letter is significant because it reflects the relationship between Bob Hymans and the Management Committee.A letter from the Falls Creek Tourist Area Management Committee raising issues and concerns of Bob Hymans' alleged non-compliance with regulations. Issues raised included damage to Nursery skiing slopes by tractor; non-compliance with Parking Directions; reluctance to use the public telephone, an untidy conditions on his site. The Committee indicated that it had the authority to make recommendations regarding the renewal or revocation of licences.falls creek tourist area management committee, bob hymans

Digital image of a group of 11 track labourers with shovels grouped around a tractor during the construction of the Victoria Parade during the winter of 1929, looking east just to the west of the intersection Wellington Parade. Appears to be a press or commercial studio photograph. See history of object for further notes and the donation file. Image i1 - scan of the group Image i2 - scan of the original photo as a wholetrams, tramways, victoria parade, track construction, new tramway, group photo

Black and white photographWritten on backing sheet- "Mail 10 April 1952. Ford Industry comes to Ringwood. Panoramic view of field day organised and arranged by Allan Coffey Motors showing tractors in operation slashing grass." Included with image- Copy of article in Ringwood Mail dated April 10, 1952,agriculture

Chris. Christiansen had a barber shop in Sunbury and was the photographer in the town from 1895 until 1916. He conducted his business in a building situated on the corner of Evans and Brooks Streets. The Gillies Bridge is situated on the Wildwood Road, just off the Lancefield Road.A mounted sepia photograph of the Gillies Bridge at Sunbury. The mounting is cream with silver writing across the bottom of the photograph. There is a man driving a steam roller (traction engine) across the bridge and another man is standing at the bottom of the bridge on the RHS. The creek and rocks are in the foreground. Cream mounting - 2 cm wide with silver inscriptionsChristiansen / Sunbury Studiosgillies bridge, wildwood road, sunbury, bridges, steam rollers, bulldozers, tractors, christiansen, chris, photographers, george evans collection

1950 decade HAY FORK - A local invention. Bill and Arthur Gillespie and Bon Barrie In the early 1950’s Bill Gillespie of Bulmans Lane had been experimenting in developing a machine to improve the collection of hay sheaves at harvesting and stack building time. The ripened crop was cut by a reaper and binder which bundled the storks into sheaves tied with binder twine. The reaper and binder was towed by a tractor by the mid 1940s previously teams of draught horses were used to pull the reaper and binder. A photograph taken at the Barrie farm shows three binders the first being towed with a tractor and the others with horse teams. Two workmen were needed to operate the binder when cutting a crop. The sheaves collected on the binder and released onto the ground and were scattered across the paddocks. Using a conventional two pronged pitch fork the harvest hands collected the sheaves and placed each one cut edge on the ground in an upright position and layered with about 15 sheaves into an apex shape to form was is known as a stook. The shape of the stook allowed for drying and draining of water if rain had occurred. Prior to the invention of the mechanical hayfork this was a laborious task requiring each sheaf to be pitched onto a tray truck and moved to the location of the haystack. The mechanised HAYFORK was operated by one person on tractor greatly reducing the need for gangs of labourers. At harvest time farmers had relied on itinerant teams of workers descending on the district looking for work. The three Barrie brothers on their adjoining farms combined forces to cut their crop at its optimum time while the weather was in their favour. Up to many 20 workers at times formed a team in earlier times. Agricultural university students were also keen to gain practical experience in the field. Each of the brothers had a particular skill, and Tom Barrie was the expert on stack building. The district haystacks had a distinctive shape and could be recognised by their builder. Bill Gillespie’s first operational HAY FORK consisted of a large 13 pronged fork situated forward of the truck cabin. It was attached with iron girders and mounted on the rear of the cabin to the tray of his British Bedford truck. It was constructed in metal and iron and welded in the farmers work sheds. The mechanism was raised and lowered by the driver scooping along the ground to pick up a complete stook to raise high enough to deposit all the sheaves in one stook onto the stack or truck tray. The fork section was released by a rope and operated by the driver in the cabin. This model was trialled on the Barrie farm at Ferris Lane. It proved to be very successful and the Barrie/ Gillespie brothers went on to develop a HAYFORK which attached to a tractor and was operated with a series of levers and was raised and lowered hydraulically. It was detached from the tractor when stacking was completed. In its early days farmers travelling along the Western Highway called at the Barrie farm at Ferris Lane to inspect its construction and operation of the invention. It became a widely adopted by farmers throughout the State. It was being used on Wattie Palmer’s farm on Bridge Road Melton South in 1997. Farming in Melton, hay growing and stack building. agriculture, local identities

White catalogue with green printing for a sale on the 10th September, '96 on account of The Shire of Campaspe, A. H. Plant & Others. For sale were tip trucks, grader, tractors, cabin cruiser, welder, garden equipment, scrap, tools, surveyors equipment, office furniture, computer equipment, safe, fuel tanks, concrete drains & pipes and sheds. J. H. Curnow & Son P/L were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - the shire of campaspe a h plant & others, ian dyett, j h curnow & son p/l, noel dyett, fred dyett

136 page softcover book. Front cover has the Title: "Yalla-Y-Poora On The Fiery Creek when the cannon's roar was stilled" printed over a coloured print of Eugene von Guerard's painting of Yalla-y-Poora; Back cover: Three colour photographs soldier settlement farming family descendants, soldier settler house and tractor. Yalla-Y-Poora On The Fiery Creek printed on spine.non-fictionNumber Six in James Affleck's series of book on Soldier Settlements in Western Victoria. An edited compilation of settler families' own stories, combined with a reincorporation of a previously published history of the area, profiles of local people and organisations illustrated with maps, photographs and poetrysoldier settlement, yalla-y-poora

A colour photograph of an old log train that is displayed in a park in Marysville in Victoria.A colour photograph of an old log train that is displayed in a park in Marysville, Victoria. The log in the photograph was destroyed in the 2009 Black Saturday bushfires and was replaced. This postcard was produced by Nucolorvue Productions Pty. Ltd. as a souvenir of Marysville.Log Train, located Burrengeen/ Park, Marysville. Log - / Messmate from Elliots Creek,/ Tractor (Fordson) originally in/ use at Anderson's Mill, near/ Mt. Strickland. NU-COLOR-VUE/ OF/ AUSTRALIA NUCOLORVUE PRODUCTIONS PTY. LTD./ COPYRIGHT PRINTED IN AUSTRALIA NCV 1656/ MA3 POST CARDmarysville, victoria, log train, burrengeen park, nucolorvue productions, postcard, souvenir, log trolley, 2009 black saturday bushfires

This fence post is from the original Snowy River Station stock yards which were where "Merindah" stands today. It was probably owned by the Marshall family at the time of transfer to "Merindah" in 1985. It was lifted out by Geoff Stevenson with a bucket on a tractor in 1986. The post was originally twice the length. The Snowy River Station was established in 1842 by Peter Imlay. In 1845 the land was sold to Norman MCLeod who named the area Orbost. After financial difficulties in the 1870's the run was taken over by W.J.Clarke and known as Orbost Station.Peter Imlay established the first white settlement in 1842 settling on the eastern side of the Snowy River where the township of Orbost now stands. This settlement was the Snowy River Station. A corner post from a post and rail fence. It is possibly made of red box.. On one side are three rectangular sections cut out with a similar one on the other sides. The post is hollow and has metal staples in the sides for attaching wires.orbost-station mcleod fence-post

Surveying under the prevailing conditions at this time was an arduous and demanding task. There were no roads beyond Tawonga and access was by bridle tracks, on foot or horseback. This camp was to provide accommodation to those men who were surveying the road from South Tawonga to the Bogong High Plains which was commenced in April, 1938. The actual work was undertaken by the Country Roads Board, on behalf of the State Electricity Commission, using three Caterpillar diesel crawler tractors equipped with Kay Bruneriei (Brunner) lhydraulically operated trailbuilders (angle dozers)This photograph shows the primitive living conditions that were endured by those carrying out the initial field investigations and surveys for the Kiewa Hydro Electric Scheme. It is possibly one of the few photographs in existence of this camp and of the very rustic timber foot bridge across the West Kiewa river. It has been taken from approx. 100m up Simmonds Creek Road. A black and white photograph showing a small, timber foot bridge across the West Kiewa River. There is a man standing on the bridge and two small huts on the far side of the river, against a backdrop of Mt. Beauty and Mt. Bogong.At the top of the photograph, handwritten in black ink is the inscription "Kiewa River and Surveyor's Camp 25/8/38". The number 4 is stamped towards the right upper corner. On the back, in a circle, about 1.3cm in diameter, are the words "Kodak Print". The word "Velox" is faintly discernible on the back as well.surveyor, tawonga, west kiewa river, bridge, camp, secv

The Bendigo business R.J. Conroy was a bicycle agency in the 1940s. Elliott Bros of Bendigo Pty Ltd was started in 1980 by three brothers Hayden, Daryl and Noel Elliott. They purchased the motorcycle dealership known as RJ Conroy from Dick Conroy. In 1990 Elliott Bros built a new premises with a huge showroom on Wattle Street in Bendigo to display their huge and diverse range of motorbikes, ATV's, chainsaws, lawnmower, brush cutters, garden tractors and all the power equipment necessary for domestic and commercial garden maintenance.Docket and Receipt, R.J.Conroy to Motor Cycle , Mower & chain Saw sales & service Mr. A. Richardson, 29 Harrison Street. Dated 11/2/1971 & 19/2/1971 for the sum of $4.95 receipt document, docket

Late 1800s-early 1900s A horse-drawn furrow plough is an example of the type of farm implement widely used by pioneer market gardeners in the Moorabbin Shire following 'Dendy's Special Survey' of 1841 and the Crown Land Sale in 1852. Land allotments were bought by pioneer settlers who established or rented allotments for market gardens in the area. They supplied produce to the markets in St Kilda and Melbourne. During the gold-rush of the 1850s the rapidly increasing population of Melbourne saw a huge demand and a rise in prices for all foodstuffs, including the vegetables and fruit grown in the Shire of Moorabbin. This heralded a time of prosperity for market gardeners, and an equally rapid expansion of the numbers of vegetable and produce growers in the area. The 'knock-on effect" resulted in an increased interest and development of the community in the Shire of Moorabbin.Following 'Dendy's Special Survey' of 1841 and the Crown Land Sale in 1852, land allotments were bought by pioneer settlers who established or rented allotments for market gardens in the area and they supplied produce to the markets in St Kilda and Melbourne. During the gold-rush of the 1850s the rapidly increasing population of Melbourne saw a huge demand and a rise in prices for all foodstuffs, including the vegetables and fruit grown in the Shire of Moorabbin. Circa late 1800's to early 1900s. A horse-drawn furrow plough was the most common type of agricultural implement used by the pioneers of the 1800s and continued on into the 1940s when motorised tractors came into use. This plough is an example of a two furrow, mullboard plough which would most likely have been pulled by two horses. The long handle was used to lower the silver plates, (mullboards), to the chosen depth of soil. Painted yellow. Although this Box Cottage museum plough is unbranded, the most widely used plough in the Shire of Moorabbin was made by Oliver. This plough appears to be identical to that brand. brighton, moorabbin, pioneers, fruit, bentleigh, vineyards, vegetables, plough, market gardens, plow

5 views of the old Engineering Shed/Machinery Shed refurbished 1983-1984. (1) Machinery Shed. (2) Now Chemical Storage. Where roller doors were has gone, now compost heap. (3) Old Carpentry at end, Mechanics Workshop to left of carpentry, next roller door is Machinery Shed/Grounds Workshop. (4) Inside Grounds Workshop (cages for storage). (5) Storage for tractor and equipmentengineering shed, machinery shed, chemical storage, carpentry, mechanics workshop, grounds workshop, cage, tractor, equipment

The Clunes Knitting Mill in Fraser Street, Clunes was the former Salvation Army Barracks which were moved from Bailey Street, Clunes to Fraser Street, Clunes by tractor in 1918. The Country Townspeople's League was founded in Clunes its mission was to campaign to decentralise industry and provide manufacturing and employment opportunities in country Victoria, specifically at that time, for the continued financial support of the Clunes Knitting Mills located in Fraser Street, Clunes, Victoria. A Bill to give effect to the proposed Clunes Country Industries Policy was to be introduced at the assembly of the new Victorian Parliament in around 1921. Black and white photocopy of a group of people in front of the Clunes Knitting Mill in Fraser Street, Clunes.Printed on bottom of page: CLUNES KNITTING MILL - FRONT VIEW OF BUILDINGScuttle, rowe, clunes country industries policy

The fishing spot known as The Lodge was accessed, for many years, via private property. This article is about an on site meeting, who attended and what was said in regards to the upgrading of a road for access to the river. Includes a letter to the Editor from Ronald Irvine stating their position. Enquiries made on March 11th 2021 with Ronald Irvine revealed that the road had deteriorated and vehicles were becoming bogged, requiring the farmer to pull them out with a tractor. Council were reluctant to fund repairs and the result was that the gate was locked and public access no longer available.Significant because it is a record of community and government discussion about community access to a popular fishing location on the Curdies River.Two page newspaper article from the Cobden Times March 5 1986peterborough, curdies river, the lodge, ronald irvine, the lodge fishing, timboon anglers club, john irvine, the cobden times, 5 march 1986