William Melrose volunteered as an oarsman in the Portland Lifeboat on the second and successfil attempt at rescue when he rowed manfully through the breakers. He was awarded a Silver Medal and [pound mark]12.10.0.Paper certificate mounted under glass and framed. Frame is carved wood, stained brown. Top corner is a carved scotch thistle, bottom corner has carved anchors. Centre of each side has a cavity for the medals. At the bottom centre is the Admella Relief and Reward Fund Draft certificate of reward to William Melrose Seaman 'Lady Bird' Melbourne Nov 12th 1859. Photograph of William Melrose in uniform with his two medals pinned to his jacket. A coat of arms is carved at the top centre with the motto "PER-MARE-PER-TERRAS".Front: Admella Relief and Reward Fund Draft certificate of reward to William Melrose Seaman 'Lady Bird' Melbourne Nov 12th 1859. Services rendered - volunteered as an oarsman in the Portland Lifeboat on the second and successfil attempt at rescue when he rowed manfully through the breakers. He was awarded a Silver Medal and [pound mark]12.10.0. Back: (no inscriptions)admella, shipwreck, portland lifeboat, rescue, reward

CEMA Art Collection Winner of 1968 Portland Art Society Art Prize for the category Oil or similar medium.The painting depicts several tall, dead trees in the foreground with dense living trees in the background. The work has an interesting texture created through the use of clearly defined thick paint strokes. This technique is particularly evident in the foreground where it has been used to create the ground from which the dead trees stand. The work has a painted wooden frame with material mount and non-reflective glass.Front: R. ARENDSEN '67 (black, lower right) Back: RENNEE ARENDSEN "DEAD WOOD FOREST, MALLACOOTA" (1968) (typed) Stamp: KATRINA GALLERIES 485 CENTRE ROAD BENTLEIGH, VIC 97-6715 Yellow Sticker: 1967 Handwriting around back of frame.

UnknownTwo-plate etching and aquatint in the form of two semi-circles. Upper half depicts two flowers hanging from a stem, and an upright stem with small buds in the background. Lower half is an unwiped plate print, showing black line drawings of daisies against a black background. Mounted with brown card and black card. Framed in grey-painted wooden frame.Front: 1/10 (lower left) "Landscape" (centre) Ray Woods 71 (lower right) (pencil) Back: (no inscriptions)

Art CollectionThe picture depicts a giraffe's neck sloping from the bottom right corner progressing into a giraffe's head at the top left. The background is plain, except for a yellow streak across the giraffe's neck close to the bottom. It is a front-view of the giraffe. Wood frame, thin white mount and glass.Front: 1/10 Giraffe 11 Mary MacQueen 69 (lower left centre, lead pencil) Back: Mary MacQueen "Giraffe 11" (1969) Litho (Bottom right, rectangle piece of white paper, printed)

Displayed at History House.Print of map pasted onto board, mounted and framed under glass. Buff-coloured mount. Mahogany stained moulded wood frame, black inner frame.Front: Plan of the Agricultural Area of Drik-Drik L.2556/Prepared by the Board of Lands and Works in accordance with the "Amending Land Act 1865". Lands and Survey Office, Melbourne 11th May 1865. (printed, upper centre). Back: Duncan Hedditchmap, drik drik, plan, geography, cartography

Portland Post Office Clock. Case is apparently new.Large mantle clock made from dark wood. Front door has a large glass pane with roman numerals in gold affixed to interior of glass. Brass arms and some of workings of clock visible through the door.Front: PORTLAND ROTARY CLUB INC. This original Portland Post Office clock, dated 1882, was fully restored and presented to the Portland City Council by Rotarian Norm Middleton on 20 September 1993. (metal engraved plaque affixed to front). Back: (unknown)portland rotary club, portland post office, mantel clock, horology

This was used to brabd sheeep to identify the owner. The brand was dipped in branding fluid then placed on the sheep's back following shearing.Crude wooden brand made of 6 pieces of pine wood box timber to form the letter Eshearing, branding, wool industry

Hand-coloured photograph of a woman with glasses wearing mayoral robes and mayoral chain. She is holding a rolled piece of paper in her hands. The background is tinted in green and mauve. Mounted in gold-coloured card in a decorative gold-painted plaster and wood frame.Front: Portland/Town Council (upper centre) Councillor/M.E. Hedditch, O.B.E., J.P/ Mayor 1956-60 (lower centre, printed black and red text). Back: (no inscriptions)

Hand-tinted black and white photograph of a man in a suit. He has dark hair parted on his right and a dark moustache. His suite is black and he is wearing a white shirt with short pointed collar and a black bow tie. Portrait is of head and upper body. Framed in a oval frame, mounted on a curved board mount, behind curved (convex) glass. Frame is wood and decorative plaster moulding in gold paint.Front: (no inscriptions) Back: J.J. Crouch (pencil, centre) 10/1/25 (pencil, centre).

Portland Town CouncilRetouched photograph of a man in a grey suit. He is wearing a side part in his hair. Framed under glass in a gold frame (plater/papermache and wood), in a gold card mount.Front: Portland Town Council (top centre), Councillor James Grenville Murrell, J.P., Mayor 1938-39 and 1943-45 (lower centre) Back: (no inscriptions)councillor james grenville murrell

Students and teacher outside D'Altons House which was Silver Springs School Students are: Back Row L-R Syd Monk, Geo D'Alton, Donald and Harvey McDonald, Will D'Alton, Robert and James Wood, and L-R W Wood, Miss Alice Osborne, Front Row Sandy McDonald, T Wood, Emmy and Effie McDonald, Amy and Clare D'AltonStudents and teacher outside of school buildingeducation, schools, silver springs

Nov 17th, Miss Alice Osborne (teacher) Children Back Row small boy Tom Wood, Syd Monk, George D'Alton, 2 McDonalds, Will D'Alton, 2 Woods, Mrs Alice Osborne and J D'Alton Front Sandy McDonald, Wood, 2 McDonalds, @ D'Altons (Clare and Amy)House of D'Altons and school House Students and teach in photo3 large copies (one sepia) and 1 smaller copyeducation, schools, silver springs

The photo shows a timber mill in the Grampians. Neither the location nor the people are known. Note: The photo may have been taken by Guy E. Neate of "Rosebank" on Neates Road in the Victoria Valley, however Guy Neate did not buy that property until June 1926 (see the book "Water Between the Hills".The photo shows two men standing beside a trolley with a large log on it. There are other logs to the left and some sawn wood is visible stacked towards the back.timber industries, logging, sawmilling

The post World War II migration of European "snow skiiers" into Australia combined with the construction of Hydo Electricity Schemes in both the N.S.W.and Victorian Alps regions, opened up these winter snow areas to a greater influx of tourists and holiday adventurers interested in "winter" sports. The ability to project, on a global scale, skiing facilities of international standards to those in the northern hemisphere during their summer has opened up the Australia ski resorts and their facilities to a much greater winter sport orientated population. These cross country skis were purchased by a member of the Bogong Ski Club and were part of a bulk ski stock consignment from Finland in 1966/67. They were introduced into the Victorian Alps to encourage skiers to take up cross country skiing both at Falls Creek and Mount Buller. This initiative spurred on the now annual 42 kilometre cross country "Kangaroo Hoppet" race at Falls Creek. This race is currently the biggest cross country snow skiing race in Australia. These snow skis were made in Finland. They are wooden (hickory) skis and made from four strips (glued and shaped) pieces of wood that are not laminated. There is a painted blue flash on the top of the skis that extends the full length of the skis. The face of the underside of the skis is flat and is coated in black Stockholm tar. Glider or grip wax was applied onto this base. The top body of the skis is tapered from shoe position to both front and back tips.Tapered curvatures from foot radiating to all sides provides the required aerodynamics. Metal boot bindings consisting of a toe plate with adjustable toe clip and a heel plate, both of which are screwed onto the skis. "KILPA, KARHU URHEILUTARPEITA SPORTART1KLAR, Karhu-Valtz Finland. Hickorypohjin"snow skiing, cross country skiing, falls creek winter tourism

This linesman belt was used under the 1947 Electricity Regulations and before tighter Occupation and Health regulations (late 1990's early 2000's) were introduced that mechanical lifting platforms(wherever possible) replaced the belt up the pole method.The safety concern was that it required that tools needed by the linesman had to be placed in a large canvas bag and attached to the belt (extra weight) then the linesman had to climb the ladder. Ladders had to be at the correct angle and not able to "slip" from their initial footings. A full harness and a secondary fall belt is now mandatory for pole linesmen. The safety of fellow workers could be compromised if they were required to assist or recover the first linesman if needed. In 2006 an additional 269 registered lineworkers were employed. Please note that the terminology of linesman has become unisex. The linesman's belt enabled the linesman to place his feet against the pole adjust the belt (if needed) and lean back securely allowing both hands to be free to work with. This linesman belt is very significant to the Kiewa Valley due to the numerous poles and high voltage overhead power structures that needed maintenance for the extensive "mushroom" installation of electrical power polls(wood and metal). On high poles (steel) climbing pegs were welded on, however in the Alpine areas snow in winter caused an OH&S problem which were hard to overcome. The safety of a linesman when maintenance of electricity line on poles can be highlighted by the New Zealand linesman who survived an 11,000 volt shock when carrying out maintenance. For the record 11,000 volts is four times more powerful than execution by "the electric chair". The maintenance of the linesman's belt was his responsibility (keeping it clean and in "good" condition). Labour laws change this initial responsibility, from the linesman, to the employer. Climbing pegs were installed on higher poles that extended beyond the reach of ladders.This thick leather linesman belt is made from two lengths of heavy lengths of leather straps sewn together to make up 80% of the belt. The remaining 20% is "the belt tonge" which has eleven holes for three (solid steel tang) buckle connections.kiewa hydro electricity scheme, victorian state electricity commission, relays, generators, electrical pole maintenance

Christoher Watson's Eltham Hotel, cnr Maria Street (Main Road) and Pitt Street, Eltham. Christopher Watson in centre (bareheaded). Reproduced on p60 of 'Pioneers & Painters' The hotel was constructed in the 1850s immediately following the discovery of gold in Victoria. The original founder, a Mr Warren. engaged a builder named Wallace, to erect the hotel, and being unable to finance it, the story goes, handed it over to Mr Wallace, who finished the job, and received the first licence. The building was constructed of hard basaltic blue stone, quarried in the Eltham district, and partly of bricks made at Eltham. At that time the town owned not only an hotel, but a flour mill, a brewery, a brickworks, and other important industries. The hotel was carried on for the benefit of the first owners for over 30 years and was then purchased by Mr Chris Watson. The hotel was in the early days a well-known resting place for the gold diggers during the gold rush at Woods' Point. A new hotel was erected on the same site by Mr H. Watson in 1925.Early photo of Eltham Hotel which has been on site in various forms since mid 1800sSepia photograph mounted on cardInscribed on back: "Property of Mr Albert Watson, 53 Yarra St, Heidelberg. Christopher Watson (bare headed) Given to Marion Huggett December 1977 c.1900 son of Watson Snr behind cart"christopher watson, eltham, eltham hotel, main road, maria street, pioneers and painters, pitt street, shire of eltham pioneers photograph collection, watson's hotel

This type of fork was used back in the days before electrical washing machines were invented. Ladies used to boil water in a 'copper' over a fire and wash the clothes and linen in it. The water was boiling hot. This wooden washing tool was used to retrieve the washing before hanging it on the line.This tool has been carved from wood. It is shaped like a two pronged fork and would have been used to lift washed clothes out of a copper (washing machine).washing clothes, 'copper' washing machine, domestic, laundry

This sewing machine would have been used by some ladies to mend and make clothes for the family as shops were some distance away and to sew items for Church and School fetes.Used in the Kiewa Valley.Black metal Singer sewing machine with gold decoration and writing on its body and platform. It sits on a wooden tray which is hollow under the body with a separate space on the right hand side. The body of the machine can be lifted by hinges attached at the back. This would enable items to be stored in the hollow part of the box. Similarly the hollow section on the right hand side, which hasn't got a lid. The body has the needle and cotton attachments on the left and a handle for working the machine on the right. There is a metal rod at the top for the cotton reel. The body is attached to the platform at each side forming an arch. The top of the box has metal along its perimeter. At each end of the top of the box there is a plate with a small hollow rectangle in the middle enabling an attachment such as a board to be inserted for an extended bench.Front & back of body: "Singer". and at front on an oval brass plate: "The Singer Manfc. Co." Inside of body on left: "This machine contains / some substitute / parts and accessories" On metal platform on right: "Y3071189" Along top of body: "The Singer Manufacturing Co." On Wood right hand side: "Godfreys Ltd / 57 Gawler Place / Phone 460261 / No. 7063 singer manufacturing co.. sewing. fetes. home duties.

Frank Saunders was the foundation president of the Upper Kiewa Valley Ambulance Service. There was an Ambulance service in the Upper Kiewa Valley commencing in April 1940 when a four stretcher ambulance was made available on the Kiewa Hydro Electric Scheme. It was designed for comparatively long and rough trips, involving some departures from usual ambulance design. Companies involved were O/C Motor Vehicles (Mr Frank Stone), in collaboration with the builders, Messrs. Jas. Thompson & Co. of South Yarra. (Ref. SECV magazine. April 1940.)This brown wooden framed plaque is backed by masonite and surrounds a black metal sign with gold lettering beside which there is a photo of a Frank Saunders. The photo is also framed with wood.Metal plate with gold letters in capitals: "Upper Kiewa Valley Ambulance Service / This Plaque is Dedicated / to the Memory of our / Foundation President / Frank Saunders / whose Leadership / Foresight and Devotion / has Inspired all Members/ of the Service"frank saunders. ambulance. upper kiewa.

Originated in the United Kingdom in 1822 with a motto "No Man Is At All Times Wise" and a maxim of "Justice, Truth and Philanthropy". A branch of the Royal Antediluvian Order of Buffaloes was formed at Bogong by Grand Lodge Officers from Melbourne and other members. The ceremony was held at Lewis Camp Mess (Kiewa Hydro Electric Scheme) with a world record of 78 new members initiated and a world record of over 100 pounds was raised. Another branch, No. 150, was opened in Mt Beauty. The Bogong and Mt Beauty lodges combined in 1948 and organised a Christmas treat for all children of the State Electricity Commission of Victoria working on the Kiewa Hydro Electric Scheme.Historical: The Bogong R.A.O.B. was formed circa Sept. 1946 and the Mt Beauty R.A.O.B. in 1948. The Members Board, the 78 members initiated and the money raise indicate that it was a popular organisation in Bogong and then in Mt Beauty during the construction of the Kiewa Hydro Electric Scheme. This club also shows how important social clubs were in making up part of the community thus making it socially historic as well. This board has good interpretive capacity as it tells the story of this club which was important to the community at the time. Large hollow wooden box with 2 wooden doors at the front that open out the from centre to a hollow box. Attached to the front of the box, at the top, is a wooden decoration with curved edges along the top. In the centre of this are the letters R.A.O.B.- the letters having been carved out of the wood and then filled with a different wood. Both doors have steel attachments and a locked padlock hangs on the door on the left. Inside the box is a white paper sign with black writing backed onto masonite. Inside the right hand side door a coloured paper sign is attached."R.A.O.B." top centre of box. "Royal Antediluvian Order of Buffaloes" etc. on black and white sign inside box. "Mt Beauty Lodge No. 150. This is to certify that Brother (blank) initiated into ...on 19th March 1949 ....signed by Chas / Chris A. Angus, Secretary" on coloured paper inside right hand side door.royal antediluvian order of buffaloes. bogong. mt beauty. charitable organisation. kiewa hydro electric scheme. lewis camp mess, clubs, societies

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

One of a set of display images thought to be produced by the Shire of Eltham c.1979-1987. Outdoor woodworking class in action at either the Eltham or Panton Hill Living and Learning Centre. In 1977 the Centre offered two other related courses: "Carpentry and Wood carving" and "Home handyman skills" - Living and Learning (1977)Illustrative of services provided by former Shire of ElthamColour photograph 20 x 29 cm mounted on green-painted chipboard 28 x 35.5 cm (string on back for hanging)Title printed on label adhered to board below photograph (replaced June 2017)living and learning centre, woodwork, class