The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. Most rooms in this historically and aesthetically significant house have stone (typically marble) fireplaces that are inset with plain and decorative tiles produced by the company of Mintons Ltd.Born digital photograph of the fireplace in the main bedroom of Villa Alba. The original 1880s white marble mantel surround has a raised iron and brass cast iron grate with hearth and side tiles by Mintons Ltd. The marble fire surround has being carved in a conventional style and lacks the opulence of what was at the time described as the grandest bedroom in the Colony, whereas the raised grate features decorative brass sun symbols and scrolling on the iron panels. The 'grey monochrome' surround tiles, of which there are eight in situ were produced to design by John Moyr Smith by Mintons Ltd as part of the 'Waverley' series (No, 1607) of which there were twelve subjects (Mintons Catalogue, p. 62/206). The selection conforms to William Greenlaw's desire to symbolically represent Scottish themes in the decoration of the house. It also relates to the mural in the dining room architrave of scenes from the novels of Sir Walter Scott. The three rows of hearth tiles employ a repeated geometric pattern.fireplaces, mintons, mintons - tiles, villa alba - main bedroom

Yields information about the SEC Wendouree Parade depot and the activities at the depot after closure.Set of seven Colour 27 x 27 mm slides in Kodachrome white cardboard mounts of activities and tramcars at the depot at or just after the time of closure. .1 - view of the depot, under exposed or a lady, possibly Lil Butler standing in front of the gates of the depot with some tramcars in the shed. .2 - view with 1 road doors closed of the scrubber tram on "0" road, derailment marks, and the tennis court lighting. .3 - partial view of a tram (bogie) just clear of one the depot doors. .4 - internal view of the depot - no lights - very underexposed - but shows the gloom! .5 - photo showing door step of a bogie tram. .6 - ditto with the lifeguard reset rod lifted - shows damage to the front panel of the tram. .7 - tram being readied for lifting or loading with E. Davis alongside - see Reg Item 6453 for a colour print as well. Negative of this filed with 6453. Slide mounts dated September 1971 Photo from the collection of Lilian Butler.ballarat, tramways, trams, sec depot, depot, wendouree parade, closure, tramcars, lifeguard, loading trams, scrubber, tram 37

Negative Nos. N393 and N394 and black and white print made by a laser printer (stored in folder) of Bendigo tram No. 6 at Golden Square terminus. Tram has the destination of Golden Square. Has the Golden Square hotel in the background and an Age advertisement on the dash panel. Note the large overhead pan at the terminus. .1 - tram has arrived and the driver/conductor has place the pole on the overhead after turning the pole. .2 - Driver/conductor standing by front of tram. Date of photo on folder - 26/9/1962?? or 1 Jan 1963. A date on the front of the folder of 1/12/1959 is too early - tram has been painted with tiger stripes and fitted with dash canopy lighting. Same date on Ballarat folders as well - see negative number N392 etc. Crew member wearing a great coat - unusual for Bendigo on a new years day. Photo early 1960's. Original negative rescanned 24/5/2020 and image file updated.BE1 - Paper folder that contained the negative had "NR15A" in red ink, "BE1" in pencil, date stamp of "1 DEC 1959" on front and on inside date stamps "26 Sep 1962" and "26 Sep 1962". BE2 - Paper folder that contained the negative had "NR104A" in red ink, "BE2" in pencil, date stamp of "1 Jan 1963" on front and on inside date stamps "26 Sep 1962". trams, tramways, bendigo, golden square, crews, tram 6

Document on foolscap paper some notes on Dudley House Bendigo Victoria, Australia courtesy of Mr Geoffrey, C. Ingleton father was the former Town Clerk of Bendigo, appointed 1 January 1924. The layout of the building at ground floor level involved the removal of walls along the left side from the entrance creating one large room. Alterations required replacement of doors, 1920's style , with decorative glass panels and door knobs of the period. This report contains excellent descriptions of furniture installed at the house, including a grandfather clock, framed etchings, easy chairs with loose floral covers, and a number of 'occasional chairs' of Rose-wood or Cedar in Edwardian design. The furniture was purchased from Morley Johnson of Bendigo and Sydney. There were also china cabinets, a gramophone in a large upright rose-wood cabriole-shaped cabinet. The name Dudley house may have been earned by reputation, or had a connection to a former tenant - perhaps a State Official or a caretaker.bendigo, history, dudley house

Roselia Isabell Welch was an actress born 16 November 1838, probably in England. Father John Murrell Welch, mother Angela Towsey. Dress has been worn by her descendants.|This decorative day dress was worn by Roselia Welch to the 1872 Melbourne Cup. Roselia made her Cup Day dress by hand - she may have used a published dress pattern but her skill as a needlewoman is evident as the entire surface is decorated with narrow hand beaded black braid applied in a fern-like motif over the blue cotton fabric of the dress creating a lace-like effect.Dress worn by Roselia Isabel Welch to the 1872 Melbourne Cup. White lining inside dress, blue lining inside train. V neck, front hook and eye opening. Handmade hook holes down centre front. Set in sleeves with black piped armhole seams. Fitted bodice with black piped seams Flat front skirt, full bustle area at back with centre back opening. Floor length train. Blue printed label on lining of centre back panel, right side. Upper case letters 'SUP' visible. Brown tape at waist with hook. Two pairs of tapes either side of back opening for bustle. Black lace around neck, sleeve, train and back opening edges. Black cotton loop in centre of train. Inset pockets right side at hip level and very small one left side at waist level. Entire surface of dress decorated with black braid hand stitched in a fern-like pattern.

A Mechanics Institute in Bacchus Marsh dates from sometime in the 1850s. The first Mechanics Institute Hall was erected in 1858 in Young Street.(Victorian Collections no.659.) In 1883 a new and larger Mechanics Institute Hall was built in Main Street. The new hall cost 2,000 pounds to construct. It was opened by Sir William Clarke on 21 November 1883. The Mechanics Institute Library and rooms at the front of the hall were removed when the building was renovated in 1971. The building still stands and is used as a public hall.Small black and white 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the Jeremeas Family Album which contains photographs of Bacchus Marsh and District in 1883 by the photographers Stevenson and McNicoll. The photo is of a substantial brick building under construction. Scaffolding support poles line the front and also can be seen on the top and back of the building. On the rooftop stand three workmen, with a further seven men standing at the front. Three men lean or stand casually at the front in casual poses. Four men stand in a line in another group on the roadway, perhaps indicating that they are master craftsmen. One of these men holds a tool of his trade, resembling a bricklayer’s mortar board. Six boys can be seen, four in a rather jaunty pose. In an indication of its public significance, the four front windows and door are arched and have decorative stone work in the side panels. A picket fence marks the boundary of the adjacent block.Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. stevenson and mcnicoll 1883 photographs of bacchus marsh and district, mechanics institutes, halls, bacchus marsh mechanics institute

Series of B&W photos of the interior and some exterior lettering and lining of Horse tram No. 1 showing the as received condition of the tramcar body. 790.1 - end panel bulkhead and cut hole through the roof where a cupboard was placed - see also item 766 for other details of the By-Laws signs. 790.2 - photo of tramcar side showing the outline through the paint of the tram car number - "1" 790.3 - Interior photo showing detail of framing around the By-Laws signs - see 766. 790.4 - interior detail where roof and end bulkhead meet. 790.5 - Exterior - showing some details of the lining. 790.6 - Exterior - showing locations of lettering along the base of the sides - have been outlined with a heavy line to show layout of lettering. 790.7 - as above but close up of "LLAA" 790.8 - similar to 790.4, but closer up. 790.9 - Exterior - view of one of the bottom corners of the body, showing the steel framing and the lining through the paint.trams, tramways, horse trams, btps, reconstruction, tramcars , tram 1

Thomas Heath built this shop for his saddlery business around 1875. In 1926 after 58 years operating his saddlery in Bacchus Marsh he retired and the assets of his business were sold in a clearing sale. The building was located close to the current day location of 192 Main Street and has been demolished. Apart from his services in saddlery his premises was known to be a gathering place for much discussion. Heath was known to openly express his political opinions and his saddlery premises was known by many in the community as the 'Parliament'.Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. The photo is of a double-fronted weatherboard building with a shingle roof. The front gabled section stands directly on street level and is flanked by a picket fence. The door and overhead window and the side window with arched panels may indicate that this was the shop section, with a dwelling to the rear. Items which may be for sale can be seen hanging in the windows. The recessed side section of the building with a twelve-sectioned window, chimney and a back extension was probably the dwelling used by the family. On the footpath stands the saddler with three children, two boys and an older girl, probably Mr Thomas Heath and three of his five children. A hitching rail runs along the front of the workshop. Indicating the type of business Mr Heath ran, are a saddle placed over the rail and two horse collars and reins hanging either side of the workshop door. On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. saddleries, saddlers, thomas heath 1842-1930 saddler

The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius computer was built in a period of rapid growth in computing technology. The first stored program computers appeared in the late 1940s and used individual designs with valve technology. By the mid-1950s valve technology was replaced by transistors and the first mass produced commercial computers became available. The Ferranti Sirius was announced in 1959 and offered a “small” academic computer. It was designed and built by the English company Ferranti Ltd and sold through a local office of the company in Melbourne. The Sirius was manufactured at the Ferranti Ltd.’s West Gorton, England factory from 1959 to 1963 and, in all, the company produced probably 22 installations although only 16 were actually recorded as sold; this included one at Ferranti’s Bureau in London and one at Ferranti’s Melbourne Bureau. Only 7 were exported and 4 of these 7 were located in Melbourne, Australia. All four were associated with computing at Monash University – the Sirius in the MMoCH collection was purchased by Monash University in 1962, a smaller Ferranti Sirius was used on the Caulfield campus (prior to amalgamation with Monash University) from 1963, the Ferranti company had its own Ferranti Sirius initially temporarily installed at Clayton campus in 1962 and then placed in their office in Queens Road, Melbourne. A fourth computer was purchased by ICIANZ (now Orica) in 1962 and was transferred to Clayton campus in 1967. Only two of these Melbourne examples have survived; one in the MMoCH collection and one at Museums Victoria. There is an example of the Ferranti Sirius in the Science Museum Group collection in the UK as well. The Ferranti Sirius in the MMoCH collection was the first computer purchased by Monash University and it was shipped to Australia to be installed by November 1962. The University had a similar model computer on loan from Ferranti Ltd during the first part of the year and it was returned to the office of the company in Queens Road, Melbourne once the University’s own machine was installed. The computer was placed on site at Clayton campus, Monash University. The computer operated from 1962 until 1972 when it was officially decommissioned. The Ferranti Sirius was sold to Mr Paul Stewart in late 1974 and removed from Monash University. Mr Stewart later donated the computer back to the University in 1988 and it was transferred to the collection of the Monash Museum of Computing History after 2001. The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius is of scientific (technological) significance as one of the early transistor digital computers that transitioned computing from first-generation valve computers to second generation commercial installations. This example of the Sirius is of historical significance in its role as a part of the Computer Centre, Clayton campus, Monash University which provided computing facilities in Melbourne in the early 1960s when there were few installations available for academic, administrative and commercial users. Staff and students were able to undertake investigative research and learn programming techniques. The Computer Centre encouraged the use of the computer across all disciplines and this provided the base to establish computer science as a subject offering and, later, a new department in the University. This growth in computer education eventually culminated in the establishment of the Faculty of Information Technology, Monash University. The Ferranti Sirius in the collection at Monash Museum of Computing History has a main unit with a CPU and memory combined with input/output equipment and one extra cabinet of memory. The Central Processing Unit is a floor-standing unit which contains the computer circuits, power supplies and has a decimal digit display panel and a normal clock. A moveable control panel is placed in front of the Unit (Currently set on a recreated desk/filing cabinet support in the display). The Sirius base unit uses acoustic delay line memory with 1000 word store. An additional 3000 word memory cabinet is set adjacent to the CPU and can be connected to increase the memory. The computer is supported by a range of input/output devices. There is a Ferranti Paper tape reader, located on desk in front of CPU. Red label on front “Ferranti tape reader. Type TR 5. Serial No. 477”. Adjacent to the CPU is a set of Simplified tape editing equipment in three pieces which includes a (1) Table unit with switches on front face. Metal tag on reverse reads “Creed & Co. Model No. S4060. Serial No. 1457. Original Customers Marking GRP7 V706”. The table has a numbered internal tag “Table Serial No. 198579. (2)Creed teletype set on table unit. Metal tag on reverse “Creed & Co. Model No. 75RPR K4M4. Serial No. 5897 Made in England”. (3)Creed paper tape reader set on table unit. This set of equipment could read paper tape and print it, or copy paper tape while allowing it to be edited, or allow a programmer or data preparation person to type and punch a new program or data. It has no electrical connection to the computer. Paper tapes were usually torn off and carried across to the computer. There is also another table unit with switches on front face and changeable setting switch on front right side which holds a Ferranti Westrex paper tape punch set. Label on reverse “Teletype Code BRPE11” This was the Computer’s only output device. BRPE-11 is a teletype model number.

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Ballarat College of Advanced Education made a preliminary submission for a Post Graduate Institute Course in Safety and Loss Control in 1975. This was forwarded to the External Advisory Panel and other experts for comment, etc. Comments were constructive and some modifications were made. These have been incorporated in this Second Draft dated August 1976. The aim of the course is to assist the administrator in identifying such accidental loss producing areas as - injury. plant damage, fire, breaches of security, property and storm damage, pollution, transportation, product liability and occupational disease. Sixteen A4 sheets - typed. Front sheet - Title page. Some pages have hand written notations in pencil. Last page has section hand written in ink.viosh, victorian institute of occupational safety and health, ballarat college of advanced education, post graduate institute, pgi, safety and loss control, external advisory panel, second draft, accidental loss, injury, plant damage, fire, security breaches, property and storm damage, pollution, transportation, product liability, occupational disease

The Skylark 4, the final in the Slingsby Skylark series, dates from 1961. The design heralded a trend towards the use of plastics in the construction of gliders. Slingsby incorporated GRP (glass reinforced plastic) panels to achieve a streamlined fuselage nose and cockpit area while retaining the more traditional wood techniques for the rest of the aircraft. Another notable feature was the smooth wing surface that was obtained using a Gaboon ply skin across the ribs. Best glide performance of 1:33 was found to be comparable with the early full GRP glider designs. The Museum’s example (VH-GTB – C/N 1382) was built in 1963 and originally owned by Chuck Bentson of the UK. It was brought to Australia in 1967 by Jeremy Picket-Heaps and flown at various places including Benalla, Cooma and Gundaroo. In 1970 the glider was transferred to the New England Soaring Club. Many flights were made from Armidale and Bellata in Northern New South Wales. On one occasion, the glider was kept aloft for 8 hours 45 minutes and on another the pilot took it around a 500 kilometre triangle in nearly 8 hours. In 1980 it was sold to Ralph (“Feathers”) Crompton and was flown extensively in South Australia until 1988. The final owner before the glider was given to the Museum in 2004 was Ross Dutton of Melbourne. The last recorded flight occurred in 1992. The glider at that point had logged over 2000 hours flying time from about 2000 launches. The airframe is currently being restored to flying condition. Technically this aircraft represents the state of the art at the stage that sailplane design was changing from traditional wood construction to composites (GRP) The Slingsby Skylark 4 is high wing single seat sailplane of mainly wooden construction with plywood and fabric covering. However, the cockpit and forward part of the fuselage consists of glass reinforced plastic which was innovative at the time that the type was designed. The cockpit provides for a semi reclining position for the pilot protected with a full Perspex canopy. The wings are made up of a centre section with constant chord and tapered wing tips. The aircraft has a conventional arrangement for the tail stabiliser / control surfaces. The sailplane bears construction number 1382 and is registered in Australia as VH-GTBaustralian gliding, glider, sailplane, skylark, slingsby, bentson, picket-heaps, crompton, new england soaring club, dutton

This is a photocopy of the original diary which was donated to ANZAC house by John Howden, F.W. Mawson's nephew. Copied using Surrey Hills Historical Society funds with permission of Anzac House librarian, Fred Pratt. Copied and later transcribed as a result of the loan of the original for the exhibition mounted as part of the 'Gallipoli and Beyond 2015' raft of events coordinated by City of Boroondara and the historical societies of Boroondara. Details re Fred Mawson (source AIF Project): Regimental number: 3073; Place of birth: Carlton, Victoria; School: Surrey Hills State School, Victoria; Religion: Presbyterian; Occupation: Carpenter; Address: Bona Vista Avenue, Surrey Hills; Marital status: Single; Age at embarkation: 22; Next of kin: Father, Frederick Mawson, Bona Vista Avenue, Surrey Hills; Enlistment date: 12 July 1915; Rank on enlistment: Sapper; Unit name: 5th Field Company Engineers; AWM Embarkation Roll number: 14/24/1; Embarkation details: Unit embarked from Melbourne, Victoria, on board HMAT A40 Ceramic on 24 November 1915; Rank from Nominal Roll: Lance Corporal; Fate Killed in Action 9 November 1917; Miscellaneous details (Nominal Roll): *second given name is William; Place of death or wounding: Ypres, Belgium; Age at death: 24; Place of burial: Ramparts Cemetery (Row J, Grave No. 24), Ypres, Belgium; Panel number, Roll of Honour, Australian War Memorial: 24. Also listed on the honour roll of The Shrine in the Surrey Gardens. A photocopy of a diary written in 1916 in F.W. Mawson during part of his period of service during WW1.(mrs) f w mawson, holmsdale, house names, bona vista avenue, surrey hills, world war 1, 1914 - 1918, diaries and journals, (mr) frederick william mawson, (mr) fred mawson,, (mr) frederick mawson (snr), surrey gardens memorial

This is the home of Ernest Augustus Young (1891-1985) and Ruby Nichell Whitby (1892-1984) and their son Ernest Lance Young. Lance was born 24 March 1915 in Surrey Hills; after he married Beryl Mair. Electoral roll for 1937 gives the house name as 'Whitby Lodge'. Ernest and Ruby also had twins Clive and James who died in infancy. Buried at Box Hill Cemetery - M-*-0867 (family plot) This is part of a large collection relating to the Mair, Deakin and Young families. REF: Memoir of Laurie Newton (nee Young) - Her grandfather bought the land and had the house built. She remembers it as having pressed ceilings in some rooms and ornate fireplaces and tiles and leadlight windows in some rooms and doors with leadlight panels. Her grandfather was a keen gardener with an ornamental front garden and many vegetables and fruit trees in the back yard. Her grandfather sold the adjoining block (No 3 York Street), which had been used for growing flowers and vegetables, to John and Edna Jean. Reid. She also remembered that he extended the house and divided it into 2 flats, renting out the northern side for 20 years. Sold by Jellis Craig on 24 December 2010 - With formal living, dining, 3 bedrooms, 2 bathrooms, garage/ample OSP. Land: 18.2m x 40.8m (60' x 134') approx. Large 2 storey house replaced the house.Colour photo of the street view of 5 York Street, Mont Albert. The house is Edwardian in style, constructed from weatherboard painted white with a red corrugated iron roof with simple finials. There is a small veranda with simple fretwork, lead-light feature windows to one, possibly two front rooms, one of which has a bay window. There is a garage set back at the side of the house with a concrete driveway on the south side of the house towards Mont Albert Road. The fence is low and constructed from roughly faced stone. The garden contains mature shrubs.In blue biro on rear: "1985 / POP'S" ; "5 YORK ST / E.A. YOUNG". Red photographic processing stamp "PROCESSED BY / KODAK / MAY 85M"ernest augustus young, ruby nichell whitby, ruby nichell young, ernest lance young, box hill cemetery, whitby lodge, house names, mont albert

This is the home of Ernest Augustus Young (1891-1985) and Ruby Nichell Whitby (1892-1984) and their son Ernest Lance Young. Lance was born 24 March 1915 in Surrey Hills; after he married Beryl Mair. Electoral roll for 1937 gives the house name as 'Whitby Lodge'. Ernest and Ruby also had twins Clive and James who died in infancy. Buried at Box Hill Cemetery - M-*-0867 (family plot) This is part of a large collection relating to the Mair, Deakin and Young families. REF: Memoir of Laurie Newton (nee Young) - Her grandfather bought the land and had the house built. She remembers it as having pressed ceilings in some rooms and ornate fireplaces and tiles and leadlight windows in some rooms and doors with leadlight panels. Her grandfather was a keen gardener with an ornamental front garden and many vegetables and fruit trees in the back yard. Her grandfather sold the adjoining block (No 3 York Street), which had been used for growing flowers and vegetables, to John and Edna Jean. Reid. She also remembered that he extended the house and divided it into 2 flats, renting out the northern side for 20 years. Sold by Jellis Craig on 24 December 2010 - With formal living, dining, 3 bedrooms, 2 bathrooms, garage/ample OSP. Land: 18.2m x 40.8m (60' x 134') approx. Large 2 storey house replaced the house. Adjacent house (No 7 York Street) has been renovated. Colour photo of a rear view of 5 York Street, Mont Albert. Only part of the house can be seen but part of the roof of the house next door and brick and stucco chimneys can be seen. There is a greenhouse between these 2 properties.Red photographic processing stamp "PROCESSED BY / KODAK / MAY 85M"ernest augustus young, ruby nichell whitby, ruby nichell young, ernest lance young, box hill cemetery, whitby lodge, house names, mont albert

Annual report of the Braille & Talking Book Library including Minutes of the AGM, Board of Director's Report, President's report and financial statements. Items also included are: a rocking chair gifted to Alice McClelland on her 60th year of involvement, retirement of Merle Griffin, 'Please Touch' exhibition at National Gallery of Victoria, creation of the Benalla Studio - funded by the Benalla Auxiliary and able to accommodate 3-4 people in a session, Margaret Ingham appointed Children's Book Specialist, renaming of existing studios to R Graeme Orr Studios (to honour former President), Library Talk commended at Public Relations Awards given by Australian Library Promotions Council, visit by children's television character 'Norm the Kangaroo' who filmed a segment of 'Shirl's Neighbourhood' around the building, thanks for Joyce Nicholson, Barrett Reid and Dr Stephen Murray-Smith as Award Selection Panel for Braille Book of the Year, need for newer building as Commercial Road premises are expensive to heat and light and all available space is occupied, book bounty scheme available for braille and audio books, Louis Braille Productions Ltd set up as a subsidary company, book reading broadcasts by ABC shows will be donated free of charge, inaugural children's catalogue of Braille books produced, resignations of Dr Simon Haskell and David Hume, appointment of Elaine Leahy and Norm Fidge, and death of Maxene Hewitt and establishment of children's book collection known as 'The Maxene Hewett Collection for Children' in her honour. There is also a photograph and staff listing as part of the annual report.1 volume of text and illustrationsbraille & talking book library, hector bathurst, maxene hewitt, alice mcclelland, alison forbes, jan smark, norm the kangaroo, nick gleeson, john poliness, andrew turk, merle griffen, gladys fanning, e.e. haynes, janene morrison, beverley jackson, dianna martin, margaret komen, penny crawford, merrie handbury, shirley robinson, sue hanson, faye donnelly, jane grimwade, jennifer spry, iris whittaker, john cockayne, martin nicol, jan odle, peter sellars, paul korsten, blanche d'alpuget, luu ngac hua, sir brian murray, warren horton, robert miller, sydney alderson

This model of St. John’s Presbyterian Church in Warrnambool was made by Johan Carl August Landmann (1826-1920). August Landmann and his wife, Christina came from Silesia to Australia in 1854. They settled in Warrnambool where August made a living as a carpenter and joiner. At first he rented shops in Timor Street and then built a two-storeyed shop and residence in Henna Street. Landmann built many of the early commercial buildings and residences in Warrnambool and he and his family were associated with the management of the Warrnambool Western Brewery. When he retired in 1900 he built another residence in Mickle Street and it was at that time that it is believed he made the model of the Presbyterian Church and the model of the Ozone Hotel (which is in the Warrnambool Art Gallery today). St. John’s Presbyterian Church, designed by Andrew Kerr, was built in the English Gothic style and opened in 1875. It was destroyed by fire in 1920 but was rebuilt to a similar style. This model is of great significance for two reasons: 1. It was made by a prominent early Warrnambool carpenter and joiner, Johan Carl August Landmann. 2. It is the only known model of the Warrnambool St. John’s Presbyterian Church which was destroyed by fire in 1920.This model is on a wooden stand or base which is painted black with metal screws. The edging of the stand contains straw which is now brown but was originally green to resemble grass or lawn. The church is a wooden structure (hollow inside) with some sections painted to resemble sandstone. The roof is slanted and painted grey and has six dormer windows or ventilation pieces on each side. The main body of the church has a nave with dual arched windows, the west end has dual arched windows and a door with louvre ventilation and the east end has a door and dual arched windows and two conical-shaped finials. The windows, some of which are triangular, have frosted decorated glass. Some of the glass in the windows is missing. The main tower is square-shaped with four conical-shaped finials. The upper part has four sets of louvres and two arched windows. The centre and lower sections have rosette patterns and several sets of dual arched windows with frosted decorated glass panels. The north east corner has a smaller tower.johan carl august landmann, st. john’s presbyterian church, warrnambool, warrnambool history

This scale model of a mining plant was made by Donald Douglas Mather of Talbot. The engine shed houses the winches, which raise and lower the cages carrying the workmen. The winches also control the water-Baling tanks, which are lowered into the pump shaft to clean the water. The Pump Shaft is part of the main shaft partitioned off for keeping the water down. The old style plant (or cas commonly known poppet legs), were all of timber construction and, when erected, straddled the main shaft. This scale model allows for steel construction, and is set over the shaft to permit an unobstructed view of the operations. The Bad level is where the workmen enter and leave the shaft. The staging platform on the first level is where the trucks and mullock or other material are wheeled out on rails and then tipped to form the mine dump. The top level is to allow for maintenance of plant. Donald Douglas Mather of Talbot worked in mines in Ballarat, and made the model of the poppet head. The poppet head is a replica of those used at many mines in Ballarat. Back in the 1850s Ballarat was a god rush town and many mining claims were made and poppet heads built this is a replica of those poppet heads which are a part of Ballarat's Heritage and a full size poppet head is erected at Sovereign Hill Theme Park in Ballarat. Mining is a huge part of Ballarat's history.A timber poppet head and engine room model. "This scale model - the modern construction of a mining plant - was made by Mr Donald Douglas Mather* of Bonnie Doon, Talbot, Victoria. The engine shed houses the winches, which raise and lower the cages carrying the workmen. The winches also control the water-baling tanks, which are lowered into the pump shaft to clean the water. The pump shaft is part of the main shaft partitioned off for keeping the water down. The old style plant (or as commonly known poppet legs), were all of timber construction and, when erected, straddled the main shaft. this scale model allows for steel construction, ans is set over the shaft to permit an unobstructed view of the operations. The bad level is where the workmen enter and leave the shaft. The staging platform on the first level is where trucks ad mullock or other material are wheeled out on rails and then tipped to form the mine dump. The top level is to allow for maintenance of plant. * Mr Mater, previously of Ballarat, worked for many years as a miner and plant erector" (Old interpretive panel)mining, mather, mining plant, poppet head, engine house, model, donald douglas mather

Clothing. Beautiful deep cream silk bodice, fully lined with cream tulle/net. Elbow length sleeves have a semi-circle of embroidered silk, and an embroidered tulle ''flounce'', edged with cream cord - 17 cms long. The bodice has seven pin-tucks, angled from the shoulder to the waistline on each side of the front and back. Between the pin-tucks at centre front panel is an extensive cream silk, floral embroidery. A rounded neckline at front and back, is in-filled with embroidered tulle - small 1 cm diameter flowers, in a 3 cm diameter circle, defined by 12 small (3mm) embroidered circles. The tulle infill extends to a 7 cm high stand-up collar-supported by seven plastic ''bones''. The collar also features the same, circular, floral embroidery, and is also edged at the throat with cream cording. The bodice while in good condition, has been cut at the hemline, and a 10.5 cm strip of fabric has been added but unfinished. 18 metal hooks, and hand-stitched loops fasten the back of the bodice. Sleeves are an extension of the bodice.costume, female, cream silk and tulle bodice

Black & White Photograph of one of the ESCo Toastracks being assembled in the Exhibition Buildings in Grenville St., north of the Alfred Hall in 1905. The other open Toastrack or Summer tramcar is behind this tram, with other California Combination cars on the sides. The trams have yet to be fitted with wheels or equipment, including headlights. Note the front dash panel has been painted, but no headlight opening or cut out. The print for this photograph made from a copy negative of page 454 of the Australasian, August 19, 1905 in 1993. Print includes caption (all in caps) "Summer Traffic Car: to be used in trips to and from the Gardens. It is without sides, and has reversible backs. Ballarat Electric Tram Service". See Reg. Item No. 763. Copy 1 made for No. 12 display 3/99. 754.1 - added 6/12/2004. Same print with details of source written on the rear. ARHS Vic. Div. Photo Number 771/24, ex Latrobe Library. Not as good as print as above. See Alan Bradley, draft Chapter 3, of the history of Ballarat Tramways.trams, tramways, esco, tramcar construction, exhibition buildings, ballarat, toastrack tram , tram 19 or 20

Yields information about the appearance of Bendigo Birney trams early 1970's and the Charing Cross area.Black and White Photograph of Bendigo No. 11, Birney, stored in the Bendigo tram depot, early 1970's following an accident. See Bendigo Tramways excerpt re this tram, ex their web site 9/6/2009. Has another, possibly stored tram along side. Photo shows the damaged end panel removed, distorted bumper bar and broken life guard tray. Photo Chris Wurr, early 1970's. "In 1968, the SECV assessed damage to the tram after an accident with an automobile. Upon inspection, it was found that the side bearers of the tram body had spread, and the centre bearers had been severely distorted because of the impact. Repairs of this nature required costly engineering work and with the closure of the tramway being imminent, it was decided to place Car 11 in storage on 6 road until the cessation of SECV services in 1972. Work commenced on the restoration of this tram in 1975 and it returned to service in 1986, being painted in the SECV livery of the 1950s." See Bendigo Tramway web site, accessed 9/6/2009 for notes re accident damage."Photo by Chris Wurr" stamped on the rear. On rear in pencil "B'go 11"trams, tramways, bendigo, depot, tram 11

Yields information about the recovery of ESCo 12 by the BTM in 1990 and has a strong association with the people involved in the project.Set of 14 prints with digital images of the removal of the building around ESCo No. 12 at Nerrina on 3-11-1990. Scanned from original prints loaned by Carolyn Cleak (Dean at the time). Printed on Agfa paper. Originals of prints later found in a depot drawer. .1 - Commencement of the removal of the metal deck roof - David Tidy. .2 - ditto with the front of the tram showing and the building itself. .3 - Roof removal continuing - Len Millar .4 - The house from the north side. .5 - Photo of interior notice to Passengers re weekly tickets etc. .6 - as for .4 .7 - Photo of the interior number of the tram. .8 - as for .6 .9 - detail of linking in side at the saloon corner. .10 - close up of the tramcar number. .11 - close up of "Please have Exact Fare Ready sign" .12 - View of the tram after the roof and some of the sides removed. .13 - ditto, ready for removal .14 - detail of lining in the upper part of the saloon panel. Close up of post in image 13, added 22-12-2018 - see i15 All have on the rear "158.7 3.11.90" in ink on the rear.trams, tramways, esco, recovery, nerrina, acquisitions, notices and information, tram 12

This afternoon dress was owned and first worn in 1875 by Alice (Henty) Hindson, the daughter of Francis Henty and Mary Ann (Lawrence) Henty. The outfit was worn in the same year as Alice's marriage to John Hindson at Trinity Church, East Melbourne, and may have formed part of her trousseau. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.Alice (Henty) Hindson's afternoon dress is a two-piece, two-toned pink ensemble made of silk taffeta. The detailing is done with fine knife-pleated trims piped in ivory satin and decorated with ivory silk moiré bows on the bodice and skirt. The panelled peplum jacket is boned and the front button closure has hand-embroidered buttonholes with handmade covered buttons. The gathered full buttoned skirt falls into a train. The skirt is decorated with rows of ivory tulle corded lace and the hemline is edged with crisp fluted organza and tatted lace. Measurements (mm): BODICE: Girth - Neck 355.6, Chest 863.6, Waist 685.8, Hip 787.4, Cuff 304.8, Hem circumference 1422.4. Vertical - From neck to hem 546.1, Front waist to hem 241.3, Back neck to hem 609.6, Back waist to hem 355.6, Sleeve length 330.2. Horizontal - Neck to sleeve head 60, Underarm to underarm 419.1. SKIRT Girth - Waist 558.8, Hip 1473.2, Hem circumference 3911.6. Vertical - Front waist to hem 1092.2, Back waist to hem 1524. fashion -- 1870s, afternoon dresses, alice (henty) hindson, women's clothing

This dress was made for and belonged to Mrs Elizabeth McLachlan (nee Duncan, 1820-1904), wife of Reverend John Hamilton McLachlan (1813-1908), who was the first Minister of St Cuthbert's Presbyterian Church in Brighton. Elizabeth and John were married at the Free Church of Ayr at Lindsaystonn in the Parish of Kirkmickach, Ayrshire, Scotland on 15 October 1849. At this time his occupation was listed as "Minister of Presbyterian Church" and hers as "Governess". They left for Australia on the 1 November 1849 and arrived in Australia 6 months later. Apparently John's hair turned snow white during the journey due to his seasickness! The McLachlans first went to Geelong upon their arrival in 1850, then to the Western District, then Brighton, then Talbot at the height of the gold mining era. The couple had seven children: John Campbell Duncan McLachlan (b. Geelong, October 1850), Mary McLachlan (b. Geelong, November 1851), Agnes McLachlan (b. Hopkins River near Wickliff, May 1853), twins Elizabeth and Walter McLachlan (b. June 1854), Elizabeth McLachlan (b. Hesham, June 1855), Margaret McLachlan (b. Brighton, 1857). Elizabeth died in 1904. She and John are both buried in Amherst Cemetery. The dress was donated by one of her granddaughters. This circa 1849 silk blue grey window pane check dress features a high round neck and pleats on either shoulder extending over the natural shoulder line. The dress shows evidence of nine ornamental buttons down the centre front with only four blue silk buttons currently still attached. The dress fastens with thirteen concealed hook and eye closures to the waist. The Pagoda sleeves inset into the bodice in a small high armhole flaring out and finishing just below the elbow. A pale blue silk ribbon with a diagonal drawn stitch design decorates the front of the sleeve in a simple geometric design. The Pagoda sleeve is lined in a matching pale blue silk. The full skirt is pleated into the waistband and finishes just above the floor at the front. At the back the bodice features a squared off design to the princess panels shaping the dress into the body. The skirt is heavily pleated at the centre back into the waistline and finishes slightly longer at the back than the front. The skirt features two very small pockets on either side of the dress, just inside the hips. reverend john hamilton mclachlan, st cuthberts presbyterian church brighton, elizabeth mclachlan, amherst cemetery, 1840s fashion, brighton

Sr. Pat (Paddy) Rowley is the Principal Nurse Educator at RDNS and is giving a lecture to RDNS Sisters in the Education Department at 452 St. Kilda Rd, Melbourne. She is wearing the RDNS summer uniform of a white short sleeve blouse under a royal blue V neck tunic style frock with the RDNS insignia on the upper left.Education was an integral part of Melbourne District Nursing Society (MDNS), from its inception in 1885, later, in 1966, called Royal District Nursing Service, (RDNS). From 1885, only Trained Nurses (Nurses), through the Hospital training system, were employed by the Society, and on visits to patients they taught the necessity of hygiene and cleanliness, as well as the need for a good diet, to bring about good health. Doctor’s lectures were later given at the MDNS home to instruct patients and their families on prevention of disease. Education to patients continued throughout the years regarding health care and the use of equipment in the home. In 1961, Education programs commenced at MDNS with Trained nurses (Sisters) receiving In-service education. Sr. Pat (Paddy) Rowley was a leader in In-service Education and established the RDNS Department of Community Nursing Education in 1962. Staff could also apply for scholarships to further their education outside of RDNS. Many of their senior Sisters received Postgraduate diplomas from the College of Nursing in Community Health Nursing, Education, and Administration, and several travelled overseas visiting nursing organizations viewing their public health and District nursing systems. At RDNS many programs were run, including: a Post Basic Course, Cardiac Rehabilitation Nursing, Haematology/Oncology Nursing, Palliative Care program, Diabetic Stabilization Program, Leg Ulcer Management Program, Wound Care Specialist Program, HIV/AIDS Nursing Care, Cystic Fibrosis Home Support, Veterans Home Care Program, Breast Cancer Support Program, Continence Management Program, Stomal Therapy Program, In-Home Lactation Support Program and the Homeless Persons Program. RDNS Sisters attended several hospitals to observe and learn special care needed to some patients, e.g. to the Austin Hospital to learn the care required for paraplegic and quadriplegic patients at home, and to Mount Royal Hospital to observe the care of patients in the Rehabilitation ward. A Community Nursing Education Program was extended to student nurses from hospitals and to other nursing organizations. These Education programs kept the RDNS Sisters abreast of new techniques, such as changes in technology for e.g. new testing methods in detecting glucose levels in Diabetic patients. Sr. Nan Deakin obtained a Post Basic Certificate in Psychiatric Nursing and included this area in her Education lectures. Sr. Daphne Geldard specialized in the area of Alzheimer’s disease and Dementia. These Sisters visited patients in District areas with the regular RDNS Sister when required. Every member of staff, both professional and non professional staff, received regular education in the Education Department. In 1980, a Home Health Aide pilot study, funded by the Federal Government, the Brotherhood of St. Laurence and RDNS, with the program written and taught by Sr. Rowley, was evaluated as successful, and Home Health Aides were employed and worked in RDNS Centres under the supervision of the RDNS Sisters. This black and white photograph shows Royal District Nursing Service (RDNS) Sister Pat (Paddy) Rowley and seventeen (some partly hidden), Royal District Nursing Service (RDNS) Sisters. The bulk of the photograph shows the front view of three rows of RDNS Sisters sitting at tables which have books and sheets of paper on them. The Sisters are wearing a variety of day clothes. In the right foreground of the Photograph is a table containing papers, and standing to its right, facing the group, is the back view of Sr. Rowley, who has short dark hair and glasses. She has her left hand on a sheet of paper on the table. She is wearing her RDNS uniform of a white short sleeve blouse under a dark tunic style frock. In the rear of the photograph a brick fireplace can be seen with some books and a vase of flowers on the mantelpiece. On the right is a long curtain, some lockers and an open wooden door with glass panel. Some of the Sisters named are:- Ann Greenwood, Judy Peter, Ethel Fullarton, Barbara Lovell, Shirley Lewis, Jane Ball..Barry Sutton Stamp. Quote LY 68royal district nursing service (1966-2017), rdns, rdns education, sister ethel fullerton, sister barbara lovell, sister shirley lewis, sister jane ball, sister pat (paddy) rowley, sister ann greenwood, sister judy peter

Comb bound (white plastic) specification or tender document, approx. 70 pages, with glossy card covers, titled "Tender Schedule for All-Electric Trams", published by the Melbourne and Metropolitan Tramways Board, closing 12 September 1966. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer. Second copy from same donor added 9-3-2017 See Reg Item 2266 for the 1972 version and 4667 for a draft version - dated June 1965. See Item 4388 for the Z3 document. See Reg Item 4049 for associated newspaper cuttings.In red felt pen on top right hand corner "(1966)". Has stamp "Discarded from PTC Library 22 Oct. 1989" on front cover. 2nd copy has "1966" in ink in top right hand corner.trams, tramways, specification, tenders, z class, mmtb, melbourne

OPENING OF THE VIEWING PLATFORM AT KANGAROO GROUND Nillumbik Council has advised that the viewing platform at Kangaroo Ground 27km NE of Melbourne is to be opened to the public on Wednesday, March 26th 2008 (Melway 271 , G10). The function of the platform is to provide shelter adjacent to the War Memorial Tower whilst allowing all people to enjoy the stunning panoramic views. From the platform you. can see the Dandenongs, the city of Melbourne, the You Yangs, Mount Macedon, the Kinglake Ranges and the Mt Baw-Baw Ranges where the Yarra River starts. This landscape covers all the ancestral lands of the Wurundjeri and some of the wider Kulin nation land. The platform has been given the name Moor-rut, a name which described the fertile soils of the Kangaroo Ground area in contrast to the poorer (Silurian) country of its surrounds, which the Wurundjeri knew as 'Nillumbik' or less rich country. The full 360 degree view can be seen from the adjacent Tower of Remembrance which has 53 stairs. The viewing platform however can be accessed by wheelchair. Inside the viewing platform there are eight double sided interpretive panels giving the history and information regarding this special area. The viewing platform's interpretive panels set out the Aboriginal and European history of the area and also the geology and the local flora and fauna, so that the casual visitor comes away understanding more about this significant part of Victoria. The concept of the viewing platform is part of the refurbishment project for the Kangaroo Ground War Memorial Park which has taken place since 1997 with the active approval and financial assistance of the Nillumbik Shire Council. This project has been guided by an Advisory Committee with volunteer community representatives from the local Historical Societies, the Country Fire Authority, the Returned Services League and the Wurundjeri people. Other allied groups such as the Nillumbik Reconciliation Group have been called upon for their expertise. The initial idea for the viewing platform came from Dean Stewart when he was the caretaker while living at the park. He discussed this idea with local author Mick Woiwod and Harry Gilham of Eltham District Historical Society when they were planning the refurbishment of the War Memorial Park in 1996. When the committee was formalised by the Nillumbik Council in 1997, Nicholas Pelling, representing the CFA and RSL, joined the group. Dennis Ward, local architect, then volunteered to develop the concept plan for the refurbishment of the park and later drew up the plans for the viewing platform. The Kangaroo Ground War Memorial Park and its Tower of Remembrance is located on one of the highest locations in the Yarra Valley. The Tower of Remembrance is a unique war memorial constructed from local stone standing 14 metres high. It was built in the style of a Scottish watchtower reflecting the strong Scottish influence of the first European settlers of the district from the 1840s onward. The park was opened in 1921 and the Tower of Remembrance was dedicated in 1926 recognising the local people who served in the First World War. Those who served in the Second World War were recognised by plaques dedicated in 1951 and more recently those who served in Korea, Borneo, Malaya and Vietnam by plaques unveiled in 2001. Harry Gilham, Advisory Committee Convenor - Eltham District Historical Society Newsletter N0 179 March 2008fay bridge collection, garden hill, kangaroo ground, memorial park, moor-rul viewing platform

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 216 NQR - Open Medium Truck 15/ 1/1914 NWS Built new VR Service History *NQR 216.VA - 15/ 1/1914 NWS Built new - / /1926 - To NQ 216.VA - Puffing Billy Service History or Notes April 2016 - Trial fitting of brake rigging May 2016 - Riveting of the draw gear castings in progress July 2016 - Riveting of the draw gear castings in progress. Truss rods threaded ready for fitting Aug 2016 - Rivetting of the draw gear castings in progress. Draw gear and couplers being evaluated. Sept 2016 - Riveting of the draw gear castings in progress. Draw gear and couplers being overhauled. Oct 2016 - Riveting of the draw gear castings completed, brake piping installed. Nov 2016 - Floor installed, under framing welding completed, fitting of side doors, hand brake fitted Dec 2016 - Car Workshop - Side panels fitted, end panels to be fitted Jan 2017 - Couplers fitted, brake rodding connected, transferred to Emerald for bogie work and sign writing. Feb 2017 - At Emerald - Tyres machined, braking system being prepared Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck216 NQR - Open Medium Truck made of Steel and metal216 NQRpuffing billy railway, pbr, rolling stock , 216 nqr - open medium truck, victorian railways, nqr - open medium truck

This scar or 'toe hold' tree fell over 50 yrs ago. It had died 50yrs before it fell and is estimated to be around 400 years old. It has a diameter of 1.3 m and is the only 'toe hold' tree in Nillumbik. Heritage Excursion - Killeavey Walk and Talk - Saturday 5th November Jane Woollard’s book Laughing Waters Road Art Landscape and Memory in Eltham devotes several chapters to the property Killeavey situated on the Yarra River at the end of Reynolds Road, Eltham. Jane has written about the natural history and indigenous history of the area and stories of the family who lived at Killeavey for many years. Killeavey was the home of Sir William Irvine, Victorian and Federal Parliamentarian and Supreme Court Judge. Later it was the home of his daughter Beatrice Morrison, a significant figure in the Eltham community. The original house was destroyed by fire and its replacement was demolished by Parks Victoria. Its sits high above the Yarra River and contains significant garden remnants. The surrounding bushland is valued for its significant plant communities. In September 2011 we visited Killeavey but without the benefit of the information more recently available from Jane’s research. We are fortunate that Jane will be joining us on this walk. There will be an extended stop at the house site for a discussion on the environment and history of the area. Inside the cover panels of Jane’s book is a reproduction of the complete artwork from ‘The Symbiogenesis Project: Laughing Waters 2011 by Aviva Reed and Paul Kalemba, as displayed in the Eltham Town Centre. This walk will start at 2 pm on Saturday 5th November at the corner of Laughing Waters and Overbank Roads. - EDHS Newsletter No. 230 October 2016fay bridge collection, 2016-11-05, activities, eltham, eltham district historical society, heritage excursion, kileavey, laughing waters road, parks victoria, cameron beardsall

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Ballarat College of Advanced Education planned to run a series of short courses and seminars in Occupational Hazard Management. This was to be a general promotional tool. Although many concepts in Occupational Hazard Management are not new, what is new is the emergence of this field as a science. The letter written about this is from Raymond Lang, Co-ordinator of Occupational Hazard Management Short Course and Seminars, He is writing to various places of interest to get support for the ideas. Speakers on various topics are also requested. Local industries plus large companies and road research groups suggested contacts. Possible programs, timetables and lecturers are listed. An External Advisory Panel established and they have contributed to the draft proposal.Eleven A4 pages, typed. Four pages are in chart fromatletterheads for Ballarat College of Advanced Education. Initials of Raymond Lang, p3viosh, victorian institute of occupational safety and health, ballarat college of advanced education, occupational hazard management, raymond lang, co-ordinator, short courses, seminars, school of engineering, part-time lecturers, time-tables, external advisory panel, road safety

The large plaster Illisos depicted in the back of this image is still held by Federation University Australia. The Ballarat Technical Art School (No. 10) was part of the Ballarat School of Mines and was established in 1907. After conducting classes in various locations around Ballarat a custom built art school was erected on the site of the former Ballarat Circuit Court House, previously used as the initial building of the Ballarat School of Mines. Examples of drawings undertaken by students, as well as some plaster castes are held in the University of Ballarat Historical Collection. The Ballarat Technical art School is the oldest continuous Tertiary Art School in Australia. Sir Alexander Peacock opened the new Ballarat Technical Art School building in July 1915. It cost 10,000 pounds and was constructed by the Public Works Department from plans drawn by the then Art School Principal, Herbert H. Smith. The building contractors were Messrs Gower and Eddards. According to the SMB Annual Report of 1914 'the internal upholstering and fittings have all been carried out in Australian timbers, with Queensland maple largely used throughout.' The building could be described as federation-art deco in style. It features sandstone insertion with sandstone string coursing. The base of the building is rusticated sandstone. The building is functional in design with large metal windows in the south wall to ensure good light into the studios. The northern wall has standard double hung windows. The interior of the building features a carved wooden staircase and cast iron ceiling vents. The rear drawing studios could be made into one large studio by opening panelled timber doors. This opening features classical plaster pilasters with a pediment above. (http://guerin.ballarat.edu.au/curator/buildings/technical_art_school.shtml) Black and white mounted photograph showing eleven students of the Ballarat School of Mines Technical Art School drawing from plaster models of human bodies in various poses and of various scales. The students are in a room of the Ballarat Technical Art School which was custom built for teaching art. The image was reproduced in the 1920 Ballarat School of Mines Students' Magazine. drawing, ballarat school of mines, ballarat technical art school, art studio, plaster caste, gribble building, illisos, hercules, drawing from the antique, visual arts