Showing 3585 items
matching steel
-
Frankston RSL Sub Branch
Mess Tin, c. 1914
Type MK1 (ie mark 1) mess tin used as a food container by Australian military servicemen during WWI. This mess tin is made of tin plated steel, has a carrying handle and clips for a shoulder strap. There is a folding handle inside of the removable lid section.australian, australia, ww1, world war 1, mess tin, food container -
Montmorency/Eltham RSL Sub Branch
Functional object - Vehicle Identification Plate, metal, Post WWII
Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Writing Equipment, desk set, c1900
The family of Miss Carol Pedersen-Green migrated to Australia from Norway c1900 and probably brought this desk set with them. A desk set comprising a wooden base with 2 cut outs for 2 clear glass ink wells with silver hinged lids. A ledge on either side to hold pens. and 4 rubber stops under base to maintain stability 5 wooden pens with steel nibs writig equipment, pens, glass inkwells, pederson-green carole, cheltenham, moorabbin, bentleigh, early settlers -
Kiewa Valley Historical Society
Spanners - Open ended x2
Spanners are used to tighten nuts of different sizes. These spanners are large and were used on larger items eg. H.V. McKay machinery. Used by residents of the Kiewa Valley.Both spanners are straight and made of steel. The 'H.V. McKay' spanner has '824' on the back (at the 'knob' end) and has a 'knob' at one end. The other spanner has the same type of opening at each end (no knob) and has embossed '55A' on one side at one end.H. V. McKay embossed (at the knob end) on one spanner and 824 on the back of it. 55A embossed on one side of the other spannerspanners, h.v.mckay -
Kiewa Valley Historical Society
Tin Tobacco, Mid to late 1900s
The British Australasian Tobacco Co. (based in Melbourne and Sydney. The parent company was founded in England, circa 1902). This item "HAVELOCK" is one of many ready rubbed tobacco tins produced by the British Australasian Tobacco Company.The ready rubbed tobacco held within the tin was mainly used by those smokers who rolled their own cigarettes. These smokers would have mainly used their palm and formed a cup then placing their choice of the amount of tobacco to be rolled. This would then be placed on the fine cigarette paper and rolled and sealed (using saliva in the mouth) into the required shape. There were mechanical "roll you own" gadgets on the market but most rural users, especially males used their palms. The quantity of tobacco used to make up the cigarette was up to the individual user. The thinner that the cigarette was rolled the longer and more economical did the supply last. The by -products of this method were nicotine stained fingers and hands. "Chain" smokers were easily identified and could therefore be discriminated against obtaining smoke sensitive employment. The two world wars (1914-18 and1939-45) produced a significant rise in the consumption of cigarette use by men and the eventual overflow to women. Cigarette smoking before the 1900s was seen as rough and uncouth (socially frowned upon), however after the introduction of overseas films (U.K. and U.S.A.) and film stars presenting smoking as socially acceptable, the rise of smoking cigarettes, especially roll you own (American western movies) in rural areas was an accepted way of life. Things however started to change in the mid 1900s when medical evidence pointed to the health problems of regular smokers. Governments were now implementing non smoking education material. Restrictions on where and when smoking was permitted and acceptable started to creep into all areas of society whether city or rural. This was the era that highlighted the use of roll your own cigarettes, especially when the costs of "tailor made" cigarettes were taxed at an increasing amount. Roll your own cigarettes also provided an avenue for the consumption of illicit drug use.The significance of this ready rubbed tobacco tin to this rural region is, stems from how much influence that the Western novels and overseas films (portraying rural lifestyles) played in shaping the rural social and working mores of the Kiewa Valley. The post war depression (financially) resulted in more smokers turning away from expensive machine (tailor) made cigarettes to the roll your own, using ready rubbed tobacco. This tobacco tin relays a long ago era, when personal contact, and not something that has been written down by some "unknown", was valued as the true appraisal of a member of the community. This was especially relevant in a small regional area such as the Kiewa Valley. Although social networking was not as fast then as the internet provides now, appearances, manners, fashion and etiquette with first impressions high on the order of evaluating someone in the community. Pointer such as the brand of tobacco smoked was part of the rural assessment method. Up until the demise of the Australian Tobacco Industry, circa 2004, the Kiewa Valley and surrounding district was part of a vibrant producer of tobacco leaves. The remnants of this industry still remain today but the drying sheds (for tobacco leaves) are now used to store hay for the valley's dairy and beef cattle industries.This tobacco tin is constructed from tin plated thin rolled steel. The lid is attached by two pressed and formed (from the main frame) hinges using the nip and tuck construction method.The lid and outside frame have had a green "weave" pattern anodised to the metal.On the outside of the lid and at the top left is stamped, in gold coloured letters "HAVELOCK". The bottom of the lid is stamped (in smaller script) "READY RUBBED TOBACCO" and below this in smaller lettering "2oz NET WEIGHT WHEN PACKED". On the rim of the lid is "THE BRITISH AUSTRALASIAN TOBACCO CO. PTY. LTD." Inside of the lid and stamped in black print on a gold anodised lid is "Every tin of genuine HAVELOCK Ready Rubbed Tobacco has the mane Havelock printed on the paper lining, and also on the band or wrapping sealing the tin. On the hinge side of the lid is "HAVELOCK READY RUBBED"roll your own, cigarette tins, smoking accessories, personal effects, tobacco containers -
Flagstaff Hill Maritime Museum and Village
Functional object - Key, circa 1866
The key is one of a collection of seven 1860s keys once belonged to the Glenample Homestead near Princetown. They are all keyed with different bits and would have opened the external panelled doors of the Georgian building. The keys would now be around 150 years old. The keys are now part of the John Chance Collection. Locksmiths became a recognised trade by the middle of the 19th century, doing work that blacksmiths and gunsmiths would have done. They were craftsmen and trained apprentices for their trade. The local community and businesses relied on them for making a wide variety of precision objects such as locks and keys, knives, ornamental and decorative latticework, fine instruments, accurate tools and hardware items. Glenample Homestead became famous after the disastrous wreck of the sailing ship Loch Ard on June 1, 1878. The owners, Hugh Hamilton Gibson and Peter McArthur, were involved in the rescue and recovery of Eva Carmichael and Tom Pearce, the only two survivors, as well as overseeing the salvage of items from the shipwreck and the burial of those who lost their lives. Eva first met Jane Shields at Glenample and they became long-time friends. The keys are significant as an example of mid-19th century locksmith hardware, and for their connection with Glenample Homestead, and for their connection to the history of the Loch Ard shipwreck’s only two survivors. Glenample Homestead is of historical, social and architectural significance to the State of Victoria and is listed on the Victorian Heritage Register (VHR H0392). It is a historical example of early settlement and development of a run in the coastal land of South West Victoria, and it is constructed from locally quarried sandstone but doesn’t take away from its Georgian design. Glenample Homestead is of State significance through its unique connection with the wreck of the ship Loch Ard and the connection to its owners, Hugh and Lavinia Gibson and Peter McArthur, played a historically and socially significant role in the rescue and care of the survivors, the salvage of goods and the burial of those who lost their lives. The shipwreck of the Loch Ard itself is of significance for Victoria and is registered on the Victorian Heritage Register (S417). Key; steel domestic door key. Flat open bow with 'figure 8' space, collar on shank, close to the bow. Round shank flares out slightly above the collar on the bit. The rectangular bit has internal and external notches and grooves. There is a rounded pin on the end.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, glenample homestead, victorian heritage register vhr h0392, georgian homestead, loch ard, princetown, jane shields, eva carmichael, tom pearce, blue china tea set, antique door key, glenample photographs, john chance -
Bendigo Historical Society Inc.
Photograph - KEN BICE COLLECTION: NORTH JOHNSON'S MINE, BENDIGO
Copy of photo: Written on back driving xcut, North Johnson's Mine Bendigo, miners boring a 'Bendigo' drag cut , 1905? Image shows two men working a rock drill, air line in foreground and centre, drill steels in foreground. This is a digital only photograph.bendigo, mining, north johnson's mine, bendigo, north johnson's mine, mining, rockdrill, dragcut -
Bendigo Historical Society Inc.
Document - MINING REPORTS - WEIGHT OF STEEL WIRE ROPE
Handwritten notes with the weight of steel wire rope. The weight of 15/16'' rope is 134 lbs per 100 ft and 1'' is 159 lbs per 100 ft. Also gives the weight of 1'' rope for 1000ft, 4000 ft, 4200 ft and 4250 ft.document, gold, mining reports, mining reports, weight of steel wire rope, 15/16'' rope, 1'' rope -
Port Melbourne Historical & Preservation Society
Document - Doug ROBERTSON, Myttons, 1930s
Doug ROBERTSON began as an office boy at Myttons. 1938 navy photo. Newspaper articles about his survival. Myttons was an engineering firm with premises in South Melbourne and Port Melbourne. They made objects as diverse as cutlery sets to sinks and larger industrial stainless steel productsindustry - manufacturing, social activities, societies clubs unions and other organisations, sport - australian rules football, myttons ltd, rodd cutlery, allbrite cutlery, dev mytton, grosvernor cutlery, built environment - industrial, reginald h mytton, eric g redwood, colin mackay, l f harrison, l w (wal) johnson, russell flack, john donaldson, lance powell, horrie farrow, syd svensson, tom fahey, tommy lahiff, arthur steele, jean hopkins, dennis mackinley, lorraine robertson, douglas robertson -
Churchill Island Heritage Farm
Functional object - Babcock Milk Tester
This milk tester was developed by Stephen Babcock in 1890 to discourage milk adulteration. Some farmers would dilute the milk with water or skim off some of the cream. To undertake the test, milk was put into a special flask with a long neck, called a Babcock bottle, an amount of sulfuric acid was added to the milk. This would dissolve proteins and others components and leave the fat. The bottles were then placed on the tester. Heating and centrifuging would cause the fat to separate and float to the top in a layer free of bubbles. The centrifuging was done by speedily turning the handle (the handle is missing on this tester). The amount of fat could then be estimated from the volume of that layer. This Babcock Milk Tester was of the type used by previous owner of Churchill Island, Harry Jenkins, who owned a dairy farm.Slate steel hand operated centrifuge, with a long wooden crank attaching to the body. Eight uncoloured metal protrusions for attaching to the bottles/pipettes connect with the crank, and the feet of the machine have two holes for secure attachment to a surface. This object has been riveted to a wooden board. Babcock Tester, Officialfarm, machinery, dairy, equipment, babcock tester, hand operated, fat content, babcock, churchill island -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Artery forceps used by Dr Lorna Lloyd-Green
These forceps belonged to Dr Lorna Lloyd-Green.Two pairs of stainless steel straight artery forceps. Forcep blades are secured with a screw attachment. One pair of forceps (.1) is inscribed with the number '3' inside both forcep shafts. The second pair (.2) is inscribed with the number '2' inside both forcep shafts.'3' '2'surgery -
Bendigo Historical Society Inc.
Tool - PITTOCK COLLECTION: ROUND TIN CONTAINER WITH DRILL BITS
Pittock collection:round tin container with nine steel drill bits * eight brace and bit drill bits * one standard drill bit * container 170 mm L x 65 mm diameter Item stored in Pittock coach builder's box, reference 13000.1. -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Pelvimeter, Thom's
Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)"in the hand of the previous curator, Melissa Campbell pre 2006.Thom's pelvimeter,internal, stainless steel. Reefer to Down Bros. catalogue 939/4, page 939. Quoted from this source Thom's as used by Whitridge Wuilliams, Obstetrics", pp. 860-906. Thom, "Study of funnel pelvis,"Amereican Journal of Surgery, July 1f915.pelvimetry -
National Vietnam Veterans Museum (NVVM)
Photograph, Bridge Building
A black and white photograph of Engineers from 17 Construction Squadron, build a bridge across on of the many creeks and streams which had been previously destroyed by NVA/VietCong forces and some as long ago as the war with the French. These bridges were built with solid steel foundations.photograph, 17 const sqn, nva/vc, gibbons collection catalogue -
Whitehorse Historical Society Inc.
Domestic object - Knives, 1878
From the estate of Jean Ord (nee Tate), late of 31 Drummond Street, Blackburn, mother of donor.A cardboard box with lid containing a set of six square shaped bone handled dessert knives with stainless steel blades of a squared shape. Box has a printed 'Guaranteed Quality, Reliable Table Cutlery Manufactured in Sheffield. Nos. hand written on side of box -95.36.26/-.Edwin H Needham|1878|Sheffield|Firth Stainlessdomestic items, cutlery -
Tennis Australia
Racquet, Circa 1935
A Dayton steel upper, wood lower, tennis racquet, with open throat, piano wire racquet strings, cloth string whipping around shoulders, and leather handle grip with large floral perforations. Materials: Metal, Glue, Lacquer, Paint, Leather, Ink, Cloth, Stringtennis -
Ballarat Tramway Museum
Document - Form/s, State Electricity Commission of Victoria (SECV), "Local Authority to Proceed - Departmental", May. 1939
Yields information about the way work was authorised by the SEC in Ballarat and how costs were then charged and recorded. Demonstrates that the ESCo steel poles were not earth to the tramway rails.Single sheet, foolscap form, pre-printed and given running number 766, titled "Local Authority to Proceed - Departmental", sent to the Tramway's Inspector, dated 30/5/39 for the earthing of steel poles to tram rails - and costs and materials used (on page 2) for the work.Has been filled in using ink and penciltrams, tramways, overhead, trolley wire, poles -
Bendigo Historical Society Inc.
Document - IAN DYETT COLLECTION: AUCTION CATALOGUE - MT. ALEXANDER QUARRIES - FARADAY
Yellow auction catalogue with red printing for a sale on the 5th November 1981 at Mt. Alexander Quarries, Faraday. For sale were the complete modern crushing plant, machinery, electric motors, conveyors and steel bins. J. H. Curnow & Son Pty. Ltd. Were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - mt. alexander quarries - faraday, j h curnow & son pty ltd, f c dyett, i m dyett, n f dyett, bolton bros pty ltd print -
Kew Historical Society Inc
Functional object, City of Kew, Wallet Presented to M.H. Martin on his Enlistment for Active Service Abroad, 1940
In 1940: "Kew Council decided ... to give wallets as mementoes to members of the Second A.I.F. who enlist from the municipality. The selection of the type of wallets to be given was left to the Mayor (Councillor H. F. Mogg)." (The Argus, 21 Feb 1940, p.11). In the event, this wallet like others were predated to 1939 on the front.This item contains two parts: a letter from the City of Kew to Pte Martin and a wallet with which he was presented. The dark brown leather wallet is embossed on the front with the seal of the City of Kew and a citation. The interior of the wallet contains a steel mirror. The letter includes the seal of the City.Wallet: "City of Kew Victoria. Presented by the Mayor, Councillors & Citizens of Kew to M.H. Martin on his Enlistment for Active Service Abroad, 1939". second world war 1939-1945 - kew (vic), m h martin, wallets -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph
A’ Squadron 8th/13th Victorian Mounted Rifles took part in Bicentennial Parade at Wodonga 2 January 1988. Parade included Light Horse Heritage Troop, Historical Vehicle Club and current armoured vehicles.Colour photograph of 2 men in uniform standing beside WW11 Jeep with machine gun mounted on pedestal. Photo is taken at Buna Barracks, Albury. Both soldiers are wearing WW11 webbing; one has steel helmet, the other is wearing 8/13 VMR beret. -
Mont De Lancey
Tool - Bale Hook (Hand Grab), Unknown
A small steel oval shaped headed bale hook or hand grab with three of nine pointed hooks remaining and a turned smooth wooden handle. The metal head is attached through a hole in the handle with a rivet. It was used to assist with handling bagged goods without causing damage. agricultural equipment, farm equipment, bale hooks, hand grabs -
Mont De Lancey
Tool - Hay Knife, James Griffin & Sons, Unknown
A large steel curved bladed silage or hay knife with a tapered handle and a bent pointed sharp end. It was used to cut hay when it is dry. Blocks were cut for the ? or stack as needed for stock feed. Silage is an animal feed cut and stored while still green.agricultutal tools, hay knife, agricultural equipment -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Weapon - Bayonet, M1898/O5s sawback "Butcher" bayonet
Used in WW1 by German soldiers, primarily pioneer troops and NCOs. Often had their teeth removed due to negative conotations associated with allied propaganda. Many German soldiers were advised not to use the sawback bayonet as they believed that if caught with it they could be summarily executed Know as a saw back bayonet or a butchers knifeDark steel bayonet with substantial 37 cm (15 in) blade. Woodne grips are missing and steel on grop is significantly rusted. Saw back edge with 2 rows of 29 teeth, The quilion bends down toward the hanle Unlike many other bayontes this bayonet does not have a muzzel ring it instead has a long t shaped gove in the handle, Mauser avoided one since these altered the vibration harmonics of the barrel when fired, affecting accuracy. All the bayonets featured quillons that curved back towards the hilt. These were much less effective at catching the opposing blade than the forward-swept quillons used by some other nations. A small number of pioneers and certain non-commissioned officers of the German Army were issued a bayonet with a sawback edge, known as the S or m.S. ("mit Säge", with saw). Many such bayonets had their teeth ground down in response to negative Allied propaganda. There is a heavily rusted, all steel scabbardWAFFENFABRIK MAUSER A.G OBERNDORF a.N5/6 rvr, bayonet, ww1, german, western front -
Ballarat Tramway Museum
Book, Australian Commonwealth Engineering Standards Association, Set of 5 Australian Standards, 1925 & 1940
Australian standards for rolling stock issued by the Australian Commonwealth Engineering Standards Association.Gives details of the 1920s standards in Australia for railway rolling stock.1 - Book - 20 pages + light grey cover, side stapled, issued by the Australian Commonwealth Engineering Standards Association tentative standard E2 to E5 - for Railway Rolling stock material, laminated volute and helical springs and spring steel, dated Dec. 1925. .2 - Book - 40 pages + light grey cover, side stapled, issued by the Australian Commonwealth Engineering Standards Association tentative standard E16 to E21 - for Railway Rolling stock material, steel blooms for railway forgings, axles, locomotive crank axles, wagon and engine tender axles - dated Dec. 1927. .3 - Book - 24 pages + light grey cover, side stapled, issued by the Australian Commonwealth Engineering Standards Association tentative standard E8 to E12 for Railway Rolling stock material - copper plates, rods, tubes and pipes and brass tubes. Dated Dec. 1925 .4 - Book - 20 pages + light grey cover, side stapled, issued by the Australian Commonwealth Engineering Standards Association tentative standard E6 and E7 - railway rolling stock material - steel plates, angles and rivets for locomotives; steel castings. Dated December 1925. .5 - Book - 12 pages + grey covers, centre stapled issued by Standards Association of Australia, standards H13 and H14 - Bronze (Gun Metal) ingots and castings for General engineering purposes Dated 1940..trams, tramways, standards, rolling stock, axles -
Flagstaff Hill Maritime Museum and Village
Tool - Saw gauge, Henry Disston, 1890-1920
Disston Saw Works of Philadelphia was one of the better known and highly regarded manufacturers of handsaws in the United States. During the Machine Age, the company was known as Henry Disston & Sons, Inc. a supplier of industrial saw blades. History: The story of handsaws in the United States mirrors the technical and development of steel in Sheffield, England, which was the center of handsaw production during the 18th century and through most of the 19th century. England's political and economic lock-on steel making in the colonies held American saw makers at bay until well after the Revolutionary War. American steel producers were unable to compete until the US government introduced import tariffs to level the playing field in 1861. Henry Disston: Henry Disston (1819–1878) began his career as an American saw maker in Philadelphia. He had emigrated from England in 1833 and started making saws and squares in 1840. In 1850, he founded the company that would become the largest saw maker in the world, the Keystone Saw Works. Some five years later, Disston built a furnace—perhaps the first melting plant for steel in America and began producing the first crucible saw steel ever made in the United States. While his competitors were buying good steel from Britain, he was making his own, to his specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army's war effort. In 1865, when his son Hamilton Disston rejoined the business after serving in the Civil War, Disston changed the company's name to Henry Disston & Son. Henry Disston and his sons began to set the standards for American saw makers, both in terms of producing high-quality saws and files in 1865 through his development of innovative manufacturing techniques. In September 1872, Henry Disston and two other men dug a part of the foundation for what was to become the largest saw manufacturing facility in the world: Disston Saw Works. This was in the Tacony section of Philadelphia. Having previously moved his expanding business from near Second and Market Streets to Front and Laurel Streets. It took over 25 years to move the entire facility to Tacony. Henry Disston was renowned for having one of the first industries that exhibited environmental responsibility, as well as a paternalistic view towards his employees. For example, he had thousands of homes built in Tacony for his workmen. Funds to purchase these homes were made available through a building and loan association set up by the Disston firm. His caring influence on the community was evident in everyday life. To meet employees' cultural needs, a hall and a library were built with Henry Disston agreeing to pay a fixed sum towards its maintenance. The Tacony Music Hall was erected in 1885, also with the assistance of Disston money. Henry Disston had fallen ill by 1877 and never truly recovered; he suffered a stroke and died the next year. This came only one and a half years after seeing his products receive the highest honors at the great Philadelphia Centennial Exposition of 1876. His vision of a working-class community and the completion of the transfer of his enormous saw plant was carried out by his wife and his sons. The company, by the early 20th century, cast the first crucible steel in the nation from an electric furnace in 1906. The firm's armor-plate building near Princeton Avenue and Milnor Street contributed tremendously to the World War II effort. But the company's innovation and industriousness would not last forever. In 1955, with mounting cash-flow problems and waning interest on the family's part to run the firm, Henry Disston and Sons were sold to the H.K. Porter Company of Pittsburgh. Porter's Disston Division was sold in 1978 and became the Henry Disston Division of Sandvik Saw of Sweden. This division was then sold in 1984 to R.A.F. Industries of Philadelphia and became known as Disston Precision Incorporated, a maker of specialized flat steel products. In 2013, R.A.F. Industries sold Disston Precision Inc. in a private sale. Although the company has ceased making Disston handsaws, the Disston brand name still exists in this firm. A tool used to set and sharpen cross cut saws used to fell trees for building construction made by a well known American maker whos firm pioneered the making of saws and their related items including files.combination cross cut saw raker and gauge/jointerDisston USA in the castingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Geelong RSL Sub Branch
Photograph - Bruce Kingsbury VC, Bruce Kingsbury VC, Late 20th Century
This is a photograph of Pte Bruce Kingsbury VC who served with the Second AIF 1940-1942.Pte Bruce Kingsbury served in the Middle East and New Guinea. Pte Kingsbury won his VC during the Battle of Isurava. He was the first serviceman to receive the VC in Australian territory.Blue Metal Photograph Frame with Black and White photograph of B S Kingsbury VC.Inscription with the photograph - In proud memory of Pte Bruce Steel Kingsbury, VC. 2/14 Battalion who with great personal courage and at the cost of his life won the Victoria Cross at Isurava by counter attacking and clearing a path through the enemy position. "Lest We Forget"kingsbury ww2 new guinea isurava -
Melbourne Tram Museum
Slide, Keith Kings, 2/01/1969 12:00:00 AM
35mm Kodak white cardboard colour slide by Keith Kings of SW6 850, the class leader at Preston Workshops 2/1/1969. Has adverts for Marshall batteries, Warren Smith Motors and High Speed Gas. See Inscriptions for further notes.Keith Kings stamp and number "45-4", with details of exposure. in ink "MMTB No. SW6 850, the prototype luxury tram built by Preston Workshops / Preston WS. Note One Piece steel frame full drop saloon windows (as in SW5 cars 840-849"trams, tramways, sw6 class, preston workshops, tram 850 -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, The Courier Ballarat, 15/5/1972
Newspaper photograph taken by The Courier of the steel framework for the BTPS depot in the south Gardens reserve. Photo taken 15/5/1972, published 16/5/1972. See Reg. Item 2203 for the photo used in the newspaper clipping. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Reg Item 4654 for a similar photo, along with 9434, and 3819.Yields information about the construction of the depot building for the BTPS in the south Gardens Reserve and the landscape at the time.Black and White copy photograph with publisher details on the rear.On rear stamped "Copyright, The Ballarat Courier Proprietary Limited."tramways, trams, btps, depot, gardens, buildings -
Bendigo Historical Society Inc.
Uniform - GERMAN MILITARY ARMY HELMET
The World War II German steel combat helmet was manufactured in 3 different variations. The first model which appeared in 1935 (M35) was a sophisticated craftwork and the M40 was an improved version. The last model, the M42 was simplified to make it faster and easier to manufacture larger numbers of helmets to compensate the huge losses of helmets during the last years of the war. The number refers to the year eg. M40 = 19407296. German Military Army Helmet. Damaged. Cracked and holed in the crown. No webbing or straps. -
Kiewa Valley Historical Society
Ski Bindings - Cross Country - pair, c1970's
Metal toe bindings clipped onto specially made boots with 3 holes at their toe on the sole enabling the cross country skier to be attached to the skis and to be able to lift their heel when skiing on flat ground.These bindings were used by skiers on the Bogong High Plains.Blue and white metal toe ski bindings with white toe clip and 3 blunt 'nails' sticking up at the front to enable a boot with 3 holes in the sole to fit on them. Two holes in the steel enable it to be fitted onto the ski. The sides are at angles narrowing towards the front."nordic norm 75 / ski lom / made in norway" inscribed between the nails and holesski bindings; bogong high plains; cross country skiing