Showing 904 items
matching marks house
-
Eltham District Historical Society Inc
Photograph, Margaret Ball, 27 Pryor Street, Eltham, June 1999, 1999
Owner 1940-50: Pauline and Ernie Harris. In late 1990s the house was demolished and units built.The Margaret Ball (Pre 1960s Houses) Collection was a personal project initiated to mark the year 2000 and arose as a result of the disappearance of many pre-1960s parts of Eltham due to development. Approximately 200 pre-1960s style houses that were left in Eltham between Main Road and east to Bible Street, between Cecil Street to the north and south to Dalton Street were photographed in late 1999. Not all of the houses could be photographed; some because the garden or trees blocked the view of the house, others because of rubbish or cars were in the way, some because people were working on the house or in the gardens at the time.Roll of 35mm colour negative film, 10 stripsFuji 200eltham, houses, streets, margaret ball (pre 1960s houses) collection, pryor street -
Eltham District Historical Society Inc
Photograph, 31 Pryor Street, Eltham, June 1999, 1999
Owner 1940-50: Mr and Mrs Barker; 1960s: Vera Barker and Colin Barker On 23 July 2019 this house and fence and garden was demolished. https://www.realestate.com.au/property/31-pryor-st-eltham-vic-3095The Margaret Ball (Pre 1960s Houses) Collection was a personal project initiated to mark the year 2000 and arose as a result of the disappearance of many pre-1960s parts of Eltham due to development. Approximately 200 pre-1960s style houses that were left in Eltham between Main Road and east to Bible Street, between Cecil Street to the north and south to Dalton Street were photographed in late 1999. Not all of the houses could be photographed; some because the garden or trees blocked the view of the house, others because of rubbish or cars were in the way, some because people were working on the house or in the gardens at the time.Roll of 35mm colour negative film, 10 stripsFuji 200eltham, houses, streets, margaret ball (pre 1960s houses) collection, pryor street -
Eltham District Historical Society Inc
Magazine Article, "In a Gracious Manor" by Tania Hill, Vogue Living, June/July 1995, pp80-87
Editor: Sandy Delves Photographer: Mark Chew Digital scan of magazine articleDigital fileeltham, arthur street, houses, jelbart barn, jelbart property -
Churchill Island Heritage Farm
Photograph - Photograph of Amess House
Churchill Island Heritage Farm has a large photographic collection dating from the nineteenth century. This series showcases photographs taken in the 1930s and 1940s and shows people who lived and worked on the Island during the Jenkins period. This photograph shows Amess House as it was in the 1940s.Black and white photograph with a white border of Amess House, with the Norfolk Pine and the cannon visible. There is a large mark/discolouration obscuring the right/bottom third of the photograph. Digitised from a high resolution copy (original Polaroid is in poor and fragile condition)nilchurchill island, photograph, arthur evans, amess house, norfolk pine, cannon -
Churchill Island Heritage Farm
Ceramic - Gravy Boat, c. 1910
This gravy boat would have been used to serve gravy or sauce, which could be poured over the meats by the diners, at the table. This gravy boat was produced by Pinnox and Unicorn, 'Wedgwood & Co Ltd', which was headed by Enoch Wedgwood, and was based in Tunstall, Stoke-on-Trent, England. This company is often confused with 'Wedgwood' which belonged to Josiah Wedgwood. The printed mark on the bottom of the boat indicates the boat is C1908+Small, rounded white ceramic gravy boat with black geometric, and gold floral pattern around rim. Gold gilt highlights on base and top rim and decorative handle. On base: Crown with 'Wedgwood & Co Ltd" Handpainted: 'v1'china, wedgwood, amess house -
Monbulk RSL Sub Branch
Book, Colleen McCullough, Roden Cutler, VC: The biography, 2001
Roden Cutler's list of honours is long and impressive, but it is his sole decoration, the Victoria Cross, that marks him as a hero. Colleen McCullough vividly shows us the life and times of the young soldier who came back from the war determined to continue to support his mother, but, having lost a leg, with no idea how to do so. Yet by the age of 29 he was the Australian High Commissioner to New Zealand, and went on to achieve a distinguished diplomatic career including 15 years as the Governor of New South Wales. His story is embedded in Australian history, and part of it.ill (maps), p.416.non-fictionRoden Cutler's list of honours is long and impressive, but it is his sole decoration, the Victoria Cross, that marks him as a hero. Colleen McCullough vividly shows us the life and times of the young soldier who came back from the war determined to continue to support his mother, but, having lost a leg, with no idea how to do so. Yet by the age of 29 he was the Australian High Commissioner to New Zealand, and went on to achieve a distinguished diplomatic career including 15 years as the Governor of New South Wales. His story is embedded in Australian history, and part of it. diplomats - australia - biography, governors - new south wales - biography -
Geoffrey Kaye Museum of Anaesthetic History
Certificate, Fellowship, Anaesthesia, 1954
Mark Cowley Lidwill was awarded an Honorary Fellowship in 1954 after his retirement to honour his working life.Mark Cowley Lidwill was born in England in 1878. His family moved to Melbourne in 1894. Lidwill studied medicine at the University of Melbourne, graduating with honours in 1902 and achieving a Doctorate in Medicine (MD) in 1905. Soon after graduation he moved to Sydney and in 1913 was appointed as the first lecturer in anaesthetics at the Royal Prince Alfred Hospital. That year Lidwill became the first person in the world to catch a black marlin with rod and reel. The event was celebrated in newspapers throughout the country and the marlin skeleton is now on display at the Australia Museum. Lidwill was also the designer of a machine which could deliver anaesthesia mechanically. Compact and portable, the machine delivered precise, although variable, concentrations of ether. Lidwill is also credited with developing the world’s first pacemaker. In a letter he wrote to Harry Daly in 1955, Lidwill was ambivalent about the fate of the machine: “No one would be bothered with it and they thought I was mad”.Printed certificate from the Faculty of Anaesthetists of the Royal Australasian College of Surgeons (RACS) awarded to Mark Cowley Lidwill as an Honorary Fellowship. Printed in black ink at the top of the certificate is the RACS coat of arms. The certificate is dated 26 June 1954 and has been signed by Harold R Dew, President of the College, and other members of the executive.mark cowley lidwill, faculty of anaesthetists, honorary fellowship, royal australasian college of surgeons, cardiology, pacemaker, royal prince alfred hospital, doctorate in medicine -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Sight Feed Type Water Depression Flowmeter, 1925
This object dates back to 1925 and was sectioned by Dr Geoffrey Kaye in 1938. Flowmeters were attached to an anaesthetic machine to measure the flow rate of gas or liquid.Metal cylinder with glass inner chamber and gauge inside. The object has been sectioned for teaching purposes.Manufacturer's marks and instructions on the top screw valve state, K/38, Screw Lightly, Oxygen Fine. Direct Ox. is inscribed on the back of the top valve. G.Kaye fecit. 1938 is inscribed in handwriting on the top of the flowmeter tube. flowmeter, water depression, gas, sectioned, slight feed, anaesthetic machine -
Geoffrey Kaye Museum of Anaesthetic History
Insufflation anaesthesia machine
In 1913, Mark Cowley Lidwill designed a machine for the purpose of mechanical or insufflation anaesthesia. The Lidwill machine was a portable machine weighing 7kg that could easily be packed into two small bags. The machine involved compressed air being delivered to an ether vaporiser. An ether/air control device allowed varying concentrations of ether to be delivered. The ether vaporiser could be immersed in hot water to prevent cooling and the ether temperature was measured. From the vaporiser, the ether/air mixture went through a trap bottle, then to a crude mercury blow-off valve and subsequently to the patient.Large leather suitcase style bag divided into two levels containing and insufflation anaesthesia machine.insufflation, mark cowley lidwill, thoracic surgery, positive pressure -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Bird Respirator Mark 7A with C.I.G. 'Ventviva' ventilator
The Bird ventilator Mark 7 is driven by medical compressed air or oxygen. It is not suited for anaesthesia unless using a special anaesthesia assistor controller attachment, which is essentially a “bag in a bottle” device.Apparatus attached to four castor stand with attached white wall connecting tubing.anaesthesia attachment, bag in a bottle -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Laryngoscope
Laryngoscope handle, with screw in connector for blade. It has a textured handle with a serrated grip for ease of use. The handle is also a battery deposit. Stamped on the base of the handle is the trade mark name details (PENLON) and the place where was made (ENGLAND). The piece has some slight scratches and surface subsidence because of its use. It has a residual marks from an used sticky tape on the base. Stamped on the base, REGD TRADE MARK / P E N L O N / MADE IN ENGLANDlaryngoscope, handle, screwed laryngoscope, screw, penlon, battery -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
Curved laryngoscope blade with light bulb only. It has visible scratches on top and back side of the blade. A rusty washer under the handle joint. Is also present in the blade base back side a curved shaped lamina attached by a screw. This blade correspond to a large size (adult) laryngoscope blade. It has stamped on the base inscriptions about: trade mark (PENLON), place where it was made (ENGLAND) and its material (Stainless).Stamped on the blade base, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped on the back edge of the blade, STAINLESSblade, penlon, light bulb, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope
Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Magill
Magill straight laryngoscope blade with tubular space for a light bulb connection (no light bulb is present). It is a PENLON piece, made in England. Size 1, for infant use. Has a slight yellowish discolouration over its base. General scratches around the base of the blade and a sticky old mark bellow an engraved inscription. It has engraved the name of the hospital where it came from and the initials of its owner.Engraved under the blade arm base the name, Royal Childrens Hospital Engraved in its lateral side attachment base piece the initials, D. A. Stamped at the back of the attachment base piece the type and size, MAGILL / 1 Stamped in its lateral side attachment base piece the trademark name and its made place, REG [is not visible the continuation] / PENLON / MADE IN ENGLANDmagill, blade, royal childrens hospital, metal, d.a. -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh
Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh
Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Soper, circa 1947
A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Circa 1943
"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Model Circa 1943
The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Circa 1943
"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, circa 1943
"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Macintosh semi curved blade designed in a child size, with a light bulb attached to the blade and a hinge attached to the back side of the base. Several scratches and deep hit marks over its surface caused by its previous use. This piece also has visible old dust spots and stains. Its contact stud is in a well condition and does not has any inscriptions. macintosh, blade, paediatrics, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Macintosh, Circa 1943
"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Laryngoscope, Longworth fitting
This object was displayed as part of the temporary Mask-Inhaler Exhibition during the Geoffrey Kaye Symposium, 29-30 January 2013.Laryngoscope penlite handle for infant Longworth fitting blades use, with a serrated grip on battery deposit, no batteries included. Top handle fitting screw is present. Minor scratches and hit marks are present over its surface. It has stamped the trade mark and place of manufacturing.Stamped on the top handle attachment place, REGD TRADE MARK / PENLON / [M] ADE IN ENGLANDhandle, penlon, longworth fitting handles, infant size handle -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Magill, circa 1943
Magill type blade to fit Longworth handles adult size without light bulb. Attached hinge at the back of the blade. Visible hit marks mostly present at the back top of the blade and below. Worn contact stud on base and lateral side at the light bulb connection. Dust spots around the piece. It has stamped on the blade base the attachment type name.Stamped at the attachment base of the blade in cursive writing, Longworthlongworth, magill, blade, adult blades, penlon -
Geoffrey Kaye Museum of Anaesthetic History
Tongue Depressor
J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Lynah, Circa 1915
Lynah's Ovoid Laryngeal Speculum with the light bulb and part of the connection wires still attached. Its semi square shape is characteristic of this kind of instrument, also has an screwable pointed end attachment. It has dusty and grey spots inside the canal of the blade near the light bulb canal. Solder spots are visible at the top of the blade as attachment of the laryngeal speculum blade base. General discolouration over the surface of this piece and hit marks present at the base of the handle. It was roughly engraved over the handle the owner’s details and year. Stamped at the base of the handle are the manufacturer’s details partially visible. Engraved at the handle, U N N A M E T . A D E L A I D E . c. 194[6] . Stamped at the base of the handle, [first line worn away might be MADE BY] / E / A D / [might be an S] YDN [might be an EY] / CHROME PLAT [incomplete word due stamp near the edge]laryngeal speculum, laryngeal instruments, unnamet, adelaide, lynah, henry lowndes -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, c 1900
Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Chevalier Jackson, Circa 1913
Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass -
Coal Creek Community Park & Museum
Pen box, Mabie Todd & Co Ltd
Long rectangular red, black and white cardboard box, writing on sides and a swan pictured on the lid.Lever filing model. Swan Pen Mabie, Todd & Co Ltd. Trade mark Mabie, Todd & Co Ltd., Manufactured Reg'd Office - Sunderland House, Curzon Street, Mayfair London W1. Branches - 133-135 Oxford Street, W1, - 114 Cheapside E.02 - 79 Holborn WC1 95 Regent St W1 London 3 Exchange Street. Manchester and of Zurich. Resident Agents : Cape Town, Paris, Barcelona, Wellington, Mabie, Todd & Co (Aust) Pty Ltd Sydney, Mabie, Todd Ltd, Belgium, S.A. 8-10 Neuve Brussels. -
Coal Creek Community Park & Museum
Korumburra Courthouse Plan, Court House. Korumburra, 27-04-1899
8517.1 - Architectural/Design plan of the Korumburra court house and attendant "Fuel Shed". Colour painted. Various notes and marks in pensil and ink; a lot of tapoe holding it together.