Demonstrates uniform cap manufacture for a SEC Inspector, shows the "braid" worn by inspectors and has a strong association with Theo Dunstan.SEC Inspectors/Conductors cap - black cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band with gold trimmings, on exterior with a plastic band at the front half of the cap terminating in two small SEC gold coloured metal buttons on either side, black plastic peak. Fitted with and "Inspector" cap badge - brass, has been polished with Brasso remains on interior of letters. Received from donor as three individual items - reassembled. Assumed made by the Commonwealth Government Clothing Factories Melbourne, as identical style to that of a crew cap.tramways, trams, ballarat, uniforms, cap, inspectors

Badge - brass with a gold finish, two triangles merged - stamped No. "114" and with raised writing "M&M Tramways Board" with a brass ring through the top of the badge, to allow it to be attached to a key ring. Issued to Members of State Parliament. On rear has remains of "Stokes and Sons Melb". Does not appear to have been used or received little use. Reference page 94/95 of Reg Item 13 Sections and Fares Book for 1975. 2nd copy No. "454" from Ron Scholten added 5/9/2021 - silver finish See 6888 for another example.trams, tramways, badges, parliament, mmtb, passes

Items in collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details..1) Badge pressed brass, shape is of an old style Artillery piece on large wheels, rear has two lugs on. .2) Badge, metals crown at top, centre has 5 stars in silver, outside is oval shape with lettering, scroll under, rear has two pins. .3) Badge silver colour metal, crown at top, oval shape, raised lettering, scroll under with same, pin on rear..2) "Royal Australian Army Pay Corps, Integrity" .3) Royal Australian Army Nursing Corps, Pro Humanitate"badges, artillery, nursing, pay

Tin contains large quantity of RAF, RAAF badges of rank. Trade badges. Buttons, brass & dark. Belt buckles plain brass, British coat of arms, darkened. Stored in a biscuit tin, rectangular shaped with corners flattened to make an octagonal. The lid has a still life scene of 6 tomatoes & a blue patterned, gold topped jug. Sides have a wavy mesh appearance of two tone blue.Printed in small black letters on lid near bottom edge: “Persimmons”numismatics-badges-military, containers - domestic, metalcraft, raf, raaf

Belonged to Capt Warick Rosenthal No TX6321 AAMC. Refer 622.3, 775. .1) RSL Membership Badge with clip "53" denoting financial member 1953. Badge has 3 figures with a blue circle around, under is a scroll in red, rear has a clip with pin & numbered. .2) Returned from Active Service Badge, blackened brass, crown over rising sun, wings / anchor / Boomerang under with words "Returned From Active Service" Two lugs and pins on rear..1) "Returned Sailors Soldiers Airmen Imperial League of Australia" On rear "V1314" .2) On rear "211849"rsl, military history, military service, active service

Issued by the Prahran and Malvern Tramways Trust to its Officers to enable free travel on its tramcars. See item 1659 for another example of a Sterling Silver pass and 399 and 576 for examples of a similar passlDemonstrates a travel pass issued to PMTT Officers.Set of two cast hexagonal nickel plated brass or sterling silver badges with a single hole in the top, with words "Prahran Tramways Trust Malvern" on one side and on reverse"Officers No. Pass" with the number "17" or "78" stamped in. One fitted with a nickel-plated ring. Raised edges with flat sides. Manufacturer unknown. On the lower edge of the reverse of badge 17 are the letters "STC.SN" stamped in, indicating a Sterling Silver item.tramways, trams, badges, tickets, travel pass, pmtt, officers, passes

Used by ESCo to enable identification of depot employees when travelling on their trams. Date made and when used unknown. See also 1798 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 54 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap could be fitted through. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES CAR DEPOT", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "16". The letters have been filled with black paint.tramcars, tramways, esco, depot, employees pass, badges

Stamped metal uniform badge for MMTB Depot starters. Tramways Board logo at top of badge in silver finish, the words "DEPOT STARTER" and the scroll outline in brass or gold colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "RG LUKE MELB" stamped into . Two metal rings were soldiered onto the rear of the badge, but have been removed.trams, tramways, badges, depot starter, mmtb

Refer to the service of "BASIL DARBY" SX9423, 2/14 Bn.1. A round bronze colour badge, at top border - words "The Reunion", at bottom border - words - "60th Anniversary 2002". In the centre of the badge are two human head profiles, two spitfires, a ship and possibly a tank with big numerals '60' at bottom. 2. Oval brass coloured badge. On top border is the phrase '70th Anniversary' . At bottom border is the phrase - "Bombing of Darwin". In the centre are a flight of aircraft, tall and short humans and the phrase "1942 Front Line Australia". 3. This is a multi shaped badge. It has a stylised Rising Sun, superimposed on that is a dark red shape of Australia. Under that is a black enamel banner with the phrase "Darwin Defenders 1942-1945". 4. This is a shield shaped badge with a long mounting pin behind it. The shield is a green enamel. In the centre is an 8 pointed gold star. Set on a red background. In that centre is phrase "1992 50th Anniversary" in gold colour. Around the outside of the star is the phrase " The Battle of Australia 50th Anniversary 1992".1. On rear is stamped 1484.badges, bombing of darwin, anniversaries

Girl Guides Service Badge. The green felt at the back of the badge indicates it was a Girl Guides badge - (brown felt indicating a Brownies badge). The number 2 indicates the owner was in her 2nd year as a member of the Girl Guide Club.Historical: Provenance: The Davies family lived at Tawonga in the Kiewa Valley. The badge indicates that a member of the family was a member in her second year of Girl Guides - Wilma who was heavily involved in the Girl Guide movement or her daughter, Kerrie who was a member of the Girl Guides.A Girl Guide Service Badge. Brass star shaped with 6 points. Half of each point has 2 embossed lines from centre circle towards the point. In the centre is a circle coloured black at the centre of which is a brass number 2. The 2 stands out from the rest as it is raised from the flat circle which in turn is raised from the points which taper down to what would be a flat base but the badge is hollow. At the back of the star is a brass loop to which is attached a hair clip like pin - with a straight edge and a bumpy edge.(split pin attachment) A green felt circular pad with a central hole is attached.The 2 embossed lines on each half of each point of the star. The number 2 in the black circle. badge. star badge. numismatics. equipment. rank. pip. kiewa valley. tas davies., girl guides. wilma davies. kerrie davies. tawonga

Randall Collection: Selection of badges relating to R Bruce Plowman. 7782.7a three brass and enamel badges, with pins; 7782.7b card from donor describing the badges: Description there of ''St Andrews PWMU'' badge - this is actually inscribed on the badge as: ''PYMBC Union of Victoria''; the 1937 Centenary badge is described by the donor as burning Bush group's but this is not noted on the badge itself; 7782.7c handwritten note from donor explaining some detail as to Plowman family and donor's father - he was an Elder at St. Andrews (when Rev. McLean was minister), he was known as the ''Man from Oodnadatta'' re this Australian Inland Mission work, he was at some stage President of the Bendigo Competitions and on the committee.

Clothing. Pointed lapel collar, with underside of collar lined with felt. Two brass metal badges in a Leidertafel style - one on each side of collar. Cloth circular badges at the top of each sleeve are embroidered with a coat-of-arms, below which are two shields, one blue, and embroidered with a bunch of grapes, one red embroidered with a sheaf of wheat, a sheep, and perhaps a symbol of the landscape. Two breast pockets, rectangular with rounded lower corners and a shield shaped flap, closed with a 2 cm brass button impressed with a laurel wreath, and horn, suspended by a cord, and triple loop-a replica of British Light Infantry buttons. Two lower ''pockets'' are flaps only, giving the impression of a pocket only. Jacket lined with blue taffeta-like fabric-possibly polyester. One internal bound pocket inside right front. Four 2.5cm brass buttons (as on pockets) at centre front opening. All buttons have a metal back, and metal loop, which enables the buttons to be pinned to the garment, enabling removal for cleaning purposes.On inside breast pocket: A Quality Garment by Australian Government Clothing Factory. On back of buttons : Stokes Australia.costume, male ceremonial, marong municipal band blazer

Used by ESCo to enable identification of depot employees when travelling on the trams. Date made and when used unknown. Has hammer marks on rear of badge. See item 9038 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 52 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap about 100 long x 10 wide with a steel buckle is fitted. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES DEPOT PASS", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "12", the one formed using an "I". The letters have been filled with a white paint.tramways, trams, esco, depot, employees pass, badges

Set of four types of coat buttons: 1 - MMTB button or Badge - brass - made by Buttons of Birmingham UK - approx. 25mm dia. 2 - MT - (Cable tram) button - brass - made by Stokes and Sons Melbourne - approx. 25mm dia. (this is to be clarified as at 24/6/2018, though see detailed image of a conductor in uniform - Reg Item 1961.) 3 - Dept of Govt Transport - Tasmania? - has a crown in the centre, - nickel silver with brass back and formed loop to sew onto a jacket or be pinned. 4 - Two badges both with the Islamic symbol and star (5 points) - brass, one marked "Tramways" and the other "Tramways Caire" - Cairo. The first badge made by "A. Meyer & Co. Wien".trams, tramways, melbourne tramways, uniforms, buttons, cairo, tasmania, cable trams

Cast hexagonal nickel plated brass or sterling silver badge with a single hole in the top, with words "Prahran Tramways Trust Malvern" on one side and on reverse "Officers No. Pass" with the number "6" stamped in. Fitted with a nickel plated ring. Raised edges with flat sides. Manufacturer unknown. In the lower edge of the reverse of the badge are the letters "STC.SN" stamped in. These are not present on the other two examples eg Reg Item 576. Has been mounted or enclosed within a coin collectors/sale cardboard folder with an embossed crown on the front. See Inscriptions.On card board enclosure in ink "Prahran Tram. Trust" and "Sterling Silver Pass" - "$15"trams, tramways, badges, officers, pmtt, passes

.1 - Badge - Manufactured - brass? with stippled gold plate finish on the rear and sides with a green and gold glazed paint finish with the words "Tramways Board Traffic Officer" in gold on the front and the number "30" stamped into the badge. Has the word "Taiwan" on the rear. Does not have a clip or holding device on the rear. Use to be clarified - could have been a wallet badge. .2 - as above - No. 66 .3 - as above with two metal lugs soldered onto the rear - No. 159 .4 - as above - No. 97 See Reg Item 6011 for another example.trams, tramways, mmtb, badges, officers

.1 - Badge - Manufactured - brass? with gold plate finish on the rear and sides with a green and gold glazed paint finish with the Metropolitan Transit Authority logo and the words "Traffic Officer" and "Metropolitan Transit" and two braised lugs and one clip for use in a uniform. Has number "4" stamped into the top of the badge. .2 - as above - No. 108 contained with in a cellophane packaging with two brass clips inside. .3 - as above No. 121 .4 - same style as above, but a larger version - No. 121 has a pocket clip on the rear - with the name "Lega Melbourne" stamped in.trams, tramways, the met, badges, officers, mta

.1) Badge metal 6 sided crown at top, centre has Coat of Arms, one lug on the rear and numbered. .2) Badge pressed brass squarish shape scroll at top and bottom, centre has a figure "8", two lugs on rear. .3) Badge pressed metal gold colour crown at top, centre has letters "ER" surrounded by circles and a wreath, two lugs on rear. .4) Badge pressed metal blackened with Rising Sun depiction crown at top. .5) Badge round silver colour, one side is map of Australia with person over, rear has map depiction of the world..1) On front, "Reserve Occupation", on rear, "A17936", "Issued by the Commonwealth Govt". .2) On front, "8th Aust Inf Regt, cede Nullis". .3) On front, "Royal Australian Army Service Corp". .4) "Australian Commonwealth Military Forces". .5) On one side, "1945", on other, "Victory Medal".badges, uniform, headwear

The following items are associated with the display of Horse Tram No. 1 at the Ballarat Engine and Machinery Preservation Society Rally at the Ballarat Showgrounds on Feb. 28 and Mar. 1, 1998. 807.1 - A4 sheet of paper, printed by BTM on 27/2/1998, advising the horse tram was on display at the showgrounds - used at the depot. 807.2 - A4 sheets of card, printed by BTM on 27/2/1998, advising people to take care when climbing the stairs, and please do not enter signs on reverse, tours on the hours and where queries could be made. Printed by laser printer on yellow card and contained within a plastic display folder. 807.3 - Three copies of the Rally brochure or flier, advertising the Rally at the Showgrounds. Printed mid 1997, on orange paper, phone numbers etc. 807.4 - A4 exhibit sheet for use on the Horse tram at the exhibition. Overprinted by BTM on 28/2/1998. 807.5 - Souvenir Programme - 28 pages plus heavy card covers, 32 pages in all, with index on page 3, list of exhibitors, Ballarat Foundries and Metal Manufacturers listings, Agricultural manufacturers, photographs, advertisements, with colour cover. 807.6 - cast brass rally badge - with organisers name cast on an oval shaped plaque with the words "Ballarat Industrial Heritage Rally" cast under and two figures, a farmer and an miner on either side. Has been stamped No. 64.trams, tramways, souvenir programmes, industrial heritage rally, ballarat manufacturers, ballarat showgrounds

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "103" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES" stamped into. Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat. Assumed was Les Denmead's badge when employed by the MMTB.tramways, trams, mmtb, inspectors, badges, uniforms

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in gold finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "91" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ See Reg Item 395 for another example.trams, tramways, badges, inspectors, mmtb

A complete replica uniform set of clothing and all items that were or could be worn by a first AIF soldier.Light horse brigade .1) Jacket, 100% wool with cotton lining. 7th Battalion AIF colour patches with a brass A signifying original ANZAC on both sleeves. Right sleeve has sergeant's stripes & 5 blue & 1 red chevron stripes. Left sleeve has 3 brass bars re WIA 3 times. Rising Sun badges on each collar & Australia badges on shoulder straps. Belted at waist. .2) Jodphurs, khaki corded wool. Brass button up fly. .3) Braces, red, white & blue oblique striped. .4) Hat, size 57, khaki Akubra with felt pugaree, leather chin strap, & blackened brass Rising Sun badge on upturned rim. .5) & .6) Puttees, pair, khaki wool felt with khaki cotton tapes. .7) & .8) Boots, pair, size L, tan coloured leather with dark brown leather laces, leather soles with metal reinforcing on heels..1) & .2) Makers labels. .4) Hat: Akubra, Made in Australia; On badge: Australian Commonwealth Military Forces. on hat: "5.7 Akubra Made in Australia"uniforms-army, costume - male footwear, costume - male headwear

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "5" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ Badge was used by the Donor as part of his work uniform. See Reg Item 6010 for another example.trams, tramways, badges, inspectors, mmtb

Clothing. Navy blue wool (or polyester?) fabric. Pointed lapel collar, lined on the underside with felt. Two brass Leidertafel style badges-one either side of collar. Two rectangular shield-shaped breast pockets have rounded lower corners, and a shield-shaped flap closure, fastened with a 1.8 cm brass like plastic button. All buttons have an impressed laural wreath and horn, (suspended by a three looped cord) - a replica of British Light Infantry buttons. Three brass like plastic buttons at centre front (4th one is missing). All buttons are pinned onto the garment to enable easy removable for cleaning. Two inside breast pockets. Fully lined with blue taffeta-like fabric. On each upper sleeve, at shoulder level there is an 8 cm diameter circular cloth badge, embroidered in blue, red, and gold, displaying a Coat-of- Arms, and two shields - one blue embroidered with a bunch of grapes, and one red, embroidered with a sheaf of wheat and a sheep. These are probably symbols of the rural aspect of the town of Marong. Two lower ''pocket flaps'' are decorative, but not real pockets.Back of buttons: STOKES AUSTRALIA. On inside breast pocket: Embroidered label featuring Australian Coat-of Arms, and Quality Garment by Australian Government Clothing Factory.costume, male ceremonial, marong municipal band blazer

.1) badge, brass, "Returned From Active Service". Crown at top over wings. Rising Sun and Anchor. Boomerang at base with "Returned From Active Service, rear has 2 lugs and pin. Rear is stamped with a number. .2) Membership badge, metal, centre has 3 figures, crown at top with pin date 1954 membership. Front of badge "Returned Sailors, Soldiers and Airmans Imperial league of Australia. Numbered stamped badge on rear with 2 lugs and pin. .3) Membership badge, metal centre has 3 figures crown at top with pine date 1994 membership. Front of badge "Returned Services League Australia". Numbered stamped badge on rear with 2 lugs and pin. .4) Membership badge, metal, 5 star shape with wreath around. Centre in light blue circle "Ex POW R.A". Small pin at bottom in red with "50" denoting membership 1950. rear has 2 lugs and is stamped with number. .5) Membership badge, metal, crown at top, centre has depiction of barbwire through blue background. At bottom is a "v" then scroll with "Ex Prisoner of War Assn" in red. rear lhas 2 lugs and pin. .6) Membership badge, metal cone shape with small hole at top. Pin with "73" under denoting membership 1970. At bottom in blue "Rising Sun, Wings and Anchor surrounded by "Chelsea Returned Servicemens Club". Rear is numbered stamp..1) Issued by Commonwealth Government of Australia” .2) “Property of League V41531” .3) “Property of League V80354” .4) "593" .6) "470"”numismatics - medals /military, membership

Set of four driver / conductor traffic numeral badges or personnel employee numbers and one brass MMTB button. .1 - Badge number, MMTB style, "1453", plated brass to give a gold finish with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Made by Stokes and Sons Melbourne - has been stamped onto the rear. .2 - ditto - engraved into a layered plastic backing - black plastic with a white underlay, used by tram crews to indicate their assigned personal employee number. Later MMTB prior to The Met type. See Reg Item 1368 for other examples. .3 - ditto - The Met - Three parts - holder made from gold coloured plastic with a metal Met (the flying one) logo fixed above the holder and fitted with a pin. A engraved plastic, gold front, black rear number was then inserted and glued into the holder - See Reg Item 2862 for other examples. .4 - as for .1 - number 3921, nickel plated steel. .5 - brass MMTB uniform button. Olive Bailey - No. 3921 Harold or Harry Leamon (husband) - 1453trams, tramways, badges, the met, mta, personnel, employees, mmtb

Set of 12 Stamped enamelled round brass pieces with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass for either all Provincial tramways, Geelong, Ballarat or Bendigo only. All badges have the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamel and outer ring the words "Electricity Supply Department, Provincial Tramways", or "Electric Tramways Ballarat" or "Electric Tramways Bendigo" or "Electric Tramways Geelong". This is in blue enamel. On the rear are stamped numbers and manufacturers name - "AMOR MELB" or "STOKES & SONS MELBOURNE" in the bottom portion of the pass, except .9 which is "STOKES" only. Items .1 -> .12 individually tagged. 1941.1 - Geelong - No. 46 - Stokes - silver background, has been used - see image file btm1942i1 and for back btm1942i2. .2 - Bendigo - No. 51 - Stokes - has been used - partially worn, silver background. .3 - Ballarat - No. 55 - Stokes - may have been used, silver background, silver background. .4 - Ballarat - No. 100 - Stokes - has been used, red in shield very faded, silver background. .5 - Ballarat - No. 102 - Stokes - has been used, worn and chipped on blue enamel near top gold centre, brass back. .6 - Bendigo - No. 105 - Stokes - gold/brass back, may have been used, some wear on right side. .7 - Ballarat - No. 106 - Stokes - appears to have been used - dirt marks on rear and front of badge, brass/gold background. .8 - Bendigo - No. 106 - Stokes - appears not to have been used, brass/gold quite bright. .9 - Geelong - No. 111 - Stokes - appears to have been used, silver back - see image file btm1942i3. .10 - Bendigo - No. 123 - Stokes - may have been used - silver background. .11 - Provincial - No. 570 - AMOR MELB - has not been used brass/gold background. .12 - Provincial - No. 657 - AMOR MELB- has not been used, brass gold background.tramways, trams, employees pass, tickets, provincial tramways, badges

This box was crafted from a portion of one of the original oak trees in the Jarrahmond WW11 Avenue of Honour.The Avenue was planted in 1955 and linked the farms of the two servicemen from Jarrahmond who lost their lives in WWII. It consisted of English Oaks interspersed with flowering peaches and cherries. Wood for the box was collected in the early 1990's by Stan Weatherall following a windstorm. Stan had the timber rough-sawn into planks by local sawmiller Max Reynolds. The timber was stored for a number of years before being given to Don McLean.A hand-made oak box. The inside base is lined in green felt. The lid is single hinged. the front panel displays a radiating pattern in the grain of the oak wood that resembles the rising sun badge of the Australian Defence Forces. Two brass pins are symbols of Australian military regalia. Inside the box is an envelope with information and letters on the manufacture of the box and presentation to Orbost. The information concerns the Jarrahmond School and the Avenue of Honour.handcraft oak jarrahmond-avenue-of-honour container