This coat would have been part of a St Johns Brigade ambulance uniform. The buttons were made by A J Parkes, who manufactured buttons for the Australian Defence force. A J Parkes began manufacturing plastic injection moulded buttons from the early 1980's which suggests that the coat would have been made and worn during the late 20th century.This item is representative of a particular piece of uniform that would have been worn by a member of the St Johns Ambulance Brigade. It has historic significance as an item dating to the late 20th century which may have been used in the service of wounded military personnel. It also has some areas of staining which could have been coused by contact with blood. This could potentially be useful for scientific research purposes.Off white knee length coat with long sleeves. There is an epoulette on each shoulder and pointed collars. There is a deep waist pocket on either side of the coat. There is one silver plastic button at the top of each pocket. These have the St John Ambulance symbol on the front, which consists of an eight pointed cross, with two very small lions and two very small unicorns nestled in the corners of the cross. These motifs are surrounded by the words "THE ST JOHN AMBULANCE BRIGADE". The epoulettes are fastened with one identical button each. Underneath each epoulette there is also a clear plastic button attached the shoulder seam. Each sleeve has a 36mm long cuff which is fastened with one St John Ambulance Brigade button each. There are 10 clear plastic buttons that fasten the entire front of the coat. The back has two pleats commencing near the nape of the neck. The back of the collar on the interior seam has a label which has been cut and shows only a small amount of detail. Printed in faded blue on the label is: "E.R. TIMMINS".military, coat, st johns brigade, uniform, ambulance, st johns brigade ambulance, st johns

THE JACKET This jacket has been tailored to flatter the wearer’s figure. It also has elements that keep it in good shape and condition, preserve it from soiling and give it a longer life: - the hooks and eyes that join the jacket to the skirt allow the outfit to be made in two pieces but fit close to the body without exposing undergarments - the seams for the metal stays have been cut and stitched to allow maximum movement of the wearer and still keep a trim figure - the discreet breast pocket allows the wearer to keep a handkerchief, coins or other small items close at hand - the lining includes removable padded shields to absorb underarm perspiration - the lining has two cotton loops attached for hanging up to air and freshen it - new cuffs have been attached over the original sleeves that have buttonholes but no buttons. The buttons may have been used to replace missing buttons on the front of the jacket or perhaps to repair worn cuffs The amber coloured satin jacket is fully lined, has turned-back cuffs, a band collar, and looped, coffee-coloured braid trim. A row of closely spaced, round bronze buttons with a floral motif form a decorative closure most of the way down the front of the jacket, below which are metal hooks and eyes that finish at the waist. Underneath the cuffs there is a closely fitted cuff with a row of three button holes but no buttons. The jacket lining has vertical metal stays spaced around the midriff, sides and back. There is an absorbent, removable pad hand-stitched to the underarm section of each sleeve opening. A small satin pocket is stitched discreetly onto the lining above the chest on the right-hand side. There are also two cotton loops sewn onto the lining. Several small metal rings are sewn at intervals around the inside of the waist A satin bow from the same fabric is attached at the centre back of the jacket at waist level. antique satin jacket, colonial evening jacket, ladies evening jacket, 19th century ladies satin jacket, evening outfit

1966 Vietnam conflictWinter wearing service dress.Corporal chevrons,4 front buttons, 2 breast buttons, red lanyard, Ordnanace Corp Badges (2), 1 Epaulete button (1 missing).

Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat.Four No. brass SEC buttons, small, used in caps to retain the cap band (plastic - See Reg Item 4451). Made with three parts, front pressing, base and loop. Front is the SEC logo, back has the manufacturers name stamped in, "Stokes Sons" (Stokes and Sons Melbourne).tramways, trams, sec, cap, uniforms, buttons

Double-Breasted lined jacket with 'wing' lapels. Left and Right pockets with cover flaps. Colour; Dark Navy. Petty Officer Badge (slightly faded) near shoulder of left sleeve.All Buttons Metal. Buttons Reverse; Stokes and Sons Melb. 6 Buttons on front; 23mm diameter. 2 Buttons on each sleeve cuff; 15mm diameter. All buttons show Crown and Anchor with 'Australia' beneath. Inside; 1 pocket on right side. 2 pockets on left side (i pocket small 'coin' or 'pocket watch' size). Inside neck; original fabric tag covered by 'Band-Aid ' sticker with the words 'G' or 'E' Cole per 13 Heeds'.

A Julius Marlow shoe box containing a variety of objects - feathers for hair decoration, 2 paper fans, black buttons, empty box, and 3 spectacles in their cases.lydia chancellor, collection, hair decoration, feathers, hair ornaments, fan, buttons, spectacles, glasses, objects, ephemera, costume accessories

Greatcoat (buttons/insignia removed). Motheaten & destroyed - Buttons kept as B360uniform, ww2, navy

Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Demonstrates uniform cap manufacture. Appears to be unworn.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "7". tramways, trams, uniforms, cap, buttons

Braces - straps worn over shoulders for holding up trousers http://en.wikipedia.org/wiki/Suspenders Suspenders (Am. English) or braces (British English) are fabric or leather straps worn over the shoulders to hold up trousers. Straps may be elasticated, either entirely or only at attachment ends and most straps are of woven cloth forming an X or Y shape at the back. Braces are typically attached to trousers with buttons using leather tabs at the ends or, incorrectly according to traditional protocol, clips.. HISTORY the modern type were first invented in 1822 by Albert Thurston and were once almost universally worn due to the high cut of mid-nineteenth and early twentieth century trousers, a cut that made a belt impractical. After losing popularity in the first World War, as men became accustomed to uniform belts, suspenders were still standard throughout the 1920s. TODAY http://www.fabsugar.co.uk/Love-Hate-Trousers-Braces-1585776 Androgynous fashion nearly always appears on the catwalk and trousers with braces made an appearance this season at Paul Smith...Grey Elastic braces forming a y shape at the back, with leather tabs to hold clips and braided loops to attach to buttons on trousers. trousers, braces, straps

Used by the MMTB as part of a tram crew or inspectors uniform .Demonstrates a MMTB uniform button.Set of two uniform buttons - two pressed metal sections provided with a lug or eye to sew the button onto a uniform jacked. The nickel-plated badge is stamped "Stokes & Sons Victoria" while the brass button is stamped "Stokes Australia". The brass button is missing the sewing eye or lug. tramways, mmtb, crews, drivers, conductors, uniforms, buttons

This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties. This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Leather Belt with 31 Badges and Buttons from WW1 attachedSee Mediaww1, world war 1, australian army, badges, button, belt, stable belt

Shin length long sleeved heavy woollen coat in khaki-green with double breasted fastening via three bakelite brown buttons. Two angled hip height pockets on the left and right hips with exterior flap, lined with cotton. Two red curved shoulder flashes on each shoulder embroidered with the words “ROYAL AUSTRALIAN/REGIMENT” in a cream thread with a cream border. Collar has two small buttons either side on the exterior and a hook and eye which fastens under the chin. Fabric epaulette on either shoulder with brown button to secure. Lower back of coat is secured by two buttons and a belt which attaches to left and right seam line and fastens via three buttons. Interior shoulder area is lined with short cotton lining which sits under the arms; sleeves lined in cotton. Pockets are cotton on interior with inscriptions; two labels on interior lower right. Labels reads “REGIMENTAL NO. 3/400922/NAME ROBINSON/GREAT COAT G.S. 1966 PATT/1951/[two lines of text overwritten with “83A” stamp]/A LANDAU VIC 1951”. Interior right pocket reads “11556/ROBERTSON/203 111051”. Shoulder lining has three stamps reading “83A” and one handwritten “83A”. Buttons read “AUSTRALIAN MILITARY FORCES”. Shoulder flashes read “ROYAL AUSTRALIAN/REGIMENT”robinson, robertson, world war ii, second world war, wwii, winter, uniform, military

The autoharp is a portable, stringed musical instrument. It is a member of the zither family but differs from the traditional zither in that chords can be easily played. The buttons on the chord bars of the autoharp can be pressed onto the strings to make different sounds. The labels on the autoharp denote the chords and the notes that the strings play. The instrument is played with the box resting on a flat surface such as a tabletop, with the left hand moving the chord buttons and the right hand strumming the strings, usually with a pick or plectrum . The autoharp was invented around the mid-1880s. There are models now available that have variations in the numbers of strings the instrument has, and differences in the sounds of the chords. Typically the autoharp has 36 strings.This autoharp is an example of musical instruments played at social gatherings and concerts in the late 1800s and early to mid 1900s. It was easily carried by the player. It is usually held in the crook of the left arm with the narrow end resting on the should and the left hand supporting the wider end, the hand pressing on the chord buttons. The right hand strums in a similar way to a playing a guitar, usually holding a soft pick or plectrum.Autoharp, painted dark brown with red rose flower decals. The portable stringed musical instrument is a member of the zither family. The autoharp is shaped like a hollow box with one corner cut off. Strings of various lengths are attached with equal spacing, parallel to the long edge of the box. A slotted board rests over the top of the strings at one end, and buttons on the slots can be pressed onto the felt-padded bars below them to produce chords. There are labels on the upper and lower boards that denote chords and musical notes.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, musical instrument, stringed instrument, harp, auto harp, zither, portable

A talking book player that allowed the user to change the tone and speed of cassettes played in it. Designed to handle both 4 track and 2 track cassettes, these players were the perfect solution to having both commercial (2 track) and recordings for the blind (4 track) materials without needing separate players. Tonal changes in particular were sometimes required by older listeners, as aging reduces the ability to distinguish high pitch sounds. Speed variability also allowed those who read faster to increase narration, and to slow down reading patterns for listeners with acquired brain injury or other conditions that affected cognitive processing of language.Blue plastic rectangular talking book player with buttons for navigational controls and 5 buttons.Model tbci serial no 8017. Machine number: 8157audio equipment, royal victorian institute for the blind

Bought at David Jones for $50. Original price $500.Maroon & cream weave Sports Jacket. 2 pockets. 3 buttons on front closing. 3 buttons on cuff of sleeves. 2 extra buttons on inside of jacket.Clement Exquisite. Made in Germany.costume, female

Suit mad by McPhersons of Numurkah for John McNamara and possibly worn for his wedding on 4-4-1953Navy three piece pin striped men's suit, vest - 5 buttons, trousers - 6 buttons & 2 buckles. Jacket, 2 buttons- 4 pocketsTailors, A. McPhersons Son Pty Ltd, Messer Numurkah J. McNamara 11/12/47nurmukah, mcnamara-john, wedding, mcphersons

Khaki woven kit containing cotton, buttons, safety pins and brass RAAF uniform Buttons.Handwritten in blue ink “ RAAF” second line unreadable.personnel equipment, military equipment, handcrafts needlecraft

Assorted uniform buttons

Cap Strap with Buttonsuniform, ww2, raaf

The insignia on the collar of this jacket indicates that its wearer was a Marine Technical Propulsion Petty Officer in the Royal Australian Navy.Double breasted jacket in dark navy colour with notched lapels, chest pocket on left side and two hip pockets. Eight gold buttons fasten the jacket in front, each bearing Navy insignia of a crown above an anchor above the word "AUSTRALIA". Sleeves each bear navy blue patch on upper shoulder with the word "AUSTRALIA" embroidered in gold thread. Cuff of sleeves carry three gold buttons as previously described. Lapel collar has an embroidered patch on both sides which includes an ornately embroidered crown, above a propeller, above a six-pointed star above a "P"; all insignia is embroidered with gold thread. Jacket contains two interior chest pockets and is lined with synthetic material. Buttons carry embossed text "STOKES/MELB" Shoulder badges read "AUSTRALIA" Interior chest label reads, "A.G.C.F./VIC. 1981/8405-66-100-2323/SIZE. 104P/MATCHING TRS/SIZE 99P/R.A.N./MADE IN/AUSTRALIA." Handwritten on this label are the annotations "5114247/BAUMGARTEN"chief petty officer stoker, royal australian navy

Uniform Gaiters belonged to Thomas Henry ISER V24933 and VX102660 2nd AIF. Refer Cat No 383.2 for his service details.Cloth Gaiters Khaki .1) Has dark brown Buttons .2) Has light brown Buttons.1) Hand written inside gaiter "Iser" stamped "?" and "RAM"gaiters uniform, military

This Easiplay 2 model was produced by CSI (Clarke & Smith Industries) using a combination of overseas and locally made parts; however demand for compact discs was increasing by this time and the players were not financially viable. After the death of John Clarke in 1997 and the subsequent loss of it's major contract with RNIB, the company was wound up in 2004.Plastic rectangular grey coloured audio player with buttons for navigational controls, power cord and 3 buttons Clarke + Smith Model 1322 Serial number 9701-0011audio equipment, clarke and smith

Circa 19th century. A pair of child's mid-brown leather leggings that extended over the child's knee. The leggings are lined with a soft napped fabric. They button-up down the outside of each leg, with leather covered buttons. An elastic strip is attached to the bottom of each legging and this passes under the child's boot and is buckled up to keep the legging in place.Circa 19th century. A pair of child's mid-brown leather leggings. The leggings extended over the child's knee. The leggings are line with a soft napped fabric. They button up down the outside of each leg, with leather covered buttons. An elastic strip is attached to the bottom of each legging and this passes under the child's boot and is buckled up to keep the legging in place. A metal button-hook trade marked Ezy Walking is also displayed.No maker's markearly settlers, market gardeners, bootmakers, moorabbin, bentleigh, cheltenham, clothing

Long dark trousers. Four buttons along the waist line, front and back. Five buttons along the front, only four are present. Leather on the inside of the trouser leg, front. Plastic Buttons trousers, long, dark blue, pants

T. Woolman, Volinteer Defence Corp.1. Gaiter - wool, khaki, 3 plastic buttons. 2. Gaiter - wool, Khaki, 3 metal buttons.gaiters, uniform, ww2, accesory