This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the double collar lip. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass, cork-top style. Applied mouth, lip has double collar; wide upper and flared lower. Vertical bubble in bulbous neck. Long diagonal discolouration along neck. Body has ripples around it and no seams. Heel is thick, base is shallow, has bubbles and is very uneven on a flat surface.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, green glass bottle

The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disc, now known as the Henshall Button, between the worm and the shank. The disc prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disc is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. In its traditional form, a corkscrew is simply a steel screw attached to a perpendicular handle, made of wood or some other material. The user grips the handle and screws the metal point into the cork, until the helix is firmly embedded, then a vertical pull on the corkscrew extracts the cork from the bottle. The handle of the corkscrew allows for a commanding grip to ease removal of the cork. https://en.wikipedia.org/wiki/CorkscrewThis object is significant as an example of an item in common use since the late 17th century.Metal corkscrew with wooden handle that is partly broken. Has metal steel spike to create a starting point for the use of the corkscrew. Very rusty. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, corkscrew, beverages, kitchen equipment, bottle opener

The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disc, now known as the Henshall Button, between the worm and the shank. The disc prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disc is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. In its traditional form, a corkscrew is simply a steel screw attached to a perpendicular handle, made of wood or some other material. The user grips the handle and screws the metal point into the cork, until the helix is firmly embedded, then a vertical pull on the corkscrew extracts the cork from the bottle. The handle of the corkscrew allows for a commanding grip to ease removal of the cork. https://en.wikipedia.org/wiki/CorkscrewMetal corkscrew with wooden handle. Has metal steel spike to create a starting point for the use of the corkscrew. Very rusty.corkscrew, kitchen equipment, bottle opener

An E&B (or B&E) wooden flat-top tennis racquet, with a wedged head frame, and unique handle design, comprising of a spotted checker pattern along shaft, cork end-wrap, and metal butt cover. Materials: Wood, Lacquer, Glue, Metal, Gut, Corktennis

This refillable ink bottle would have been used extensively in the early 1900's before ballpoint pens were introduced.Ink bottles are rarely used today. This item is an example of early stationery equipment commonly used in schools, households and commercial enterprises.A clear glass ink bottle. It would have had a cork stopper. It is seamed on both sides and the shoulders are tiered.on front - 402 SWAN INK on base - indecipherable markingsink-bottle container glass-bottle

Canteen - Felt covered, khaki, leather straps, metal buckle and rivets, Cork top adhered to canteen by twine.passchendaele barracks trust, water canteen

Item used in offices earlier part of the 20th century, waste baskets were sold in great numbers with many differing designs from the 1830s most from this time were made of willow or bamboo. Later wire mesh and pressed steel were used.An early example of a wire mesh industrial type of waste basket used in office situations.Basket metal waste paper with wire mesh joined to iron ring at top and flat round cork base.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Footwarmer : Ceramic with Cork 23 cm x 14cm Previous label #133 Ex Mechanics Institute Eaglehawk

Faded yellow label with yellow writing. Small picture on label with a lemon on it Screw cork lid, with rubber sealSparkling lemon Preservatised this food contains not more than one grain of sulphur di____e to the pint Carbonated

Round clear glass bottle with cork stopper and remnant paper cover seal. Vestiges of a paper label on side.nil

Glass wound irrigating syringes were in general use from approximately 1915 to the beginning of the 1940s.Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920. She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993. Glass wound syringe, with wood cap at distal end and cork bung inside a glass barrel with tapered end. irrigation, midwifery

Earthenware cream and green port decanter (full) with cork and wax seal. Commemorates Welcome Home Parade 1987Australain vietnam Forces "Welcome Home Parade 87" commemorative "reunion"Tawny Portport decanter, welcome home parade 1987

Mother of pearl finish on pocket knife blade. Shoe button hook, cork screw, spike and small loop.knife, pocket knife tatura

ACME Thunderer Whistle with cork pea. Ring fitment at top to hang. Silver coloured base metal body.THE ACME / THUNDERER / MADE IN / ENGLANDacme thunderer, j. hudson & co, whistles

Tie shape preserver is made of cork and has a slight curve.Tie was placed over the preserver to stretch out the creases."With Compliments From Berryman & Bryant Tie Specialists Yarrawonga".tie, preserver, shape.

Photographs pasted on board with descriptions. (1) Kauri Pine (Agathis robusta)." (2) "Cork Oak (Quercus suber)." kauri pine, cork oak, trees, history

Army issue water bottle as made by GMHMade by GMH 1940Black metal water bottle with cork stopper in neck. Tan leather carry rack including shoulder strapmilitary, water bottle, leather holster

BHS CollectionDark green glass bottle half full. Small part of label left but unreadable. Cork in. Keep upright.

Boer War 1899 - 1900 Army issue water bottle. A variety of water bottle designs were used during the South African War & a member of the 4th Victorian Imperial Bushman carried this bottle.Water bottle. blue coloured, round, cork attached by metal chain, hanging leather strap & metal buckle.containers, military equipment - water, passchendaele barracks trust

A wooden racquet with a rippled throat, red whipping with parchment supports, and cork-inlaid handle. Inscription across the throat and stem of the obverse: BUSSEY/DEMON/DRIVER/1/EXTRA/LIGHT/GGB/BUSSEY'S/TENSIVE/GRIP. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Parchment, Corktennis

Number stamped on leather strapping around the bottle is “435891” This matches Flying Office Mervyn Albert Henry Schramm who enlisted 8/10/43 and was discharged 20/12/45 and was posted to RAF Station Gampston. The name written on the felt bottle cover possible “lowein” ?? Does not match any on the DVA rolls.Military Issued Water Bottle. Bottle in blue tin metal but is fully bound in brown felt material. Wrapped around felt is a leather strap that hooks over the shoulder. The water bottle is capped by a cork top with a metal hook into a wooden top on the cork. Lid is attached to the case by a piece of string. Written on the felt case cover in black pen a name appears to be "Denis Lowein". Stamped on leather strap No. “435891”, also on side strap "R.A.A.F K.W (over)194?"raaf, gampston

Webbing, Patten 37 with two ammunition pouches & a felt covered enamel water battle with cork attached. Khaki in colour.On belt: “MTK D [up arrow] D 1956 Normal” Handwritten: “Mangano 545125” On belt & underside right shoulder strap: “Hennequin 3203281”military equipment - kit bag - army, webbing, passchendaele barracks trust

This bottle was made in Scotland and recovered decades later from a shipwreck along the coast of Victoria. It may have been amongst the ship's cargo, its provisions or amongst a passenger's personal luggage. It is now part of the John Chance collection. Stoneware bottles similar to this one were in common use during the mid-to-late 19th century. They were used to store and transport. The bottles were handmade using either a potter's wheel or in moulds such as a plaster mould, which gave the bottles uniformity in size and shape. The bottle would then be fired and glazed in a hot kiln. Makers often identified their bottles with the impression of a small symbol or adding a colour to the mouth. The manufacturer usually stamped their bottles with their name and logo, and sometimes a message that the bottle remained their property and should be returned to them. The bottles could then be cleaned and refilled. DUNDAS POTTERY WORKS - The Dundas Pottery works were established in 1828 by William Johnstone in partnership with John Forsyth and John Mc Coll. Located where the Forth and Clyde Canal joined the Monkland Canal, North of Glasgow. Johnstone sold the pottery in 1835 to Robert Cochran and James Couper. Mc Coll was retained as manager until 1837 when in 1839 Cochran & Couper sold the pottery and purchased the St Rollex Glass Works. George Duncan took over briefly but died in 1841, with the pottery possibly being run by his widow Helen and a potter named Alexander Paul. James Miller was the manager at the time and he bought the pottery in 1856, in partnership with John Moody. Miller's long and careful stewardship of the pottery saw success from the export market which allowed him to purchase the North British pottery in 1867 until 1874 when it was sold. In 1875, Miller, in partnership with John Young, leased part of Caledonian Pottery, naming it Crown Pottery, however, it burned down in 1879. In the early 1880s, Young extended the pottery and named it Milton Pottery. Miller’s son, James W., became a partner in Milton pottery in 1905. James Miller Snr died in 1905 and the company continued as a limited liability company, being sold to the Borax Consolidation Ltd in 1929, but it was unsuccessful and Possil pottery purchased some of the company's equipment before it finally closed in 1932. From 1828 until the James Miller period of circa 1856, the pottery produced salt-glazed stoneware for the local industrial trade; mainly bottles and drain pipes. James Miller produced various bottles, whisky and acid jars, casks, butter crocks, jam jars and domestic wares in Bristol glaze. He streamlined the water filter manufacturing, which had become a speciality of the pottery, and a dedicated section of the pottery was created solely for their production, which was exported worldwide.This stoneware bottle is historically significant for its manufacture and use in the late 19th to the early 20th century. This bottle is historically significant for its connection with the well-known stoneware manufacturers, Dundas Pottery of Glasgow, Scotland. The bottle is also significant as it was recovered by John Chance, a diver, from a wreck on the coast of Victoria in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, salt glazed stoneware, beige, sealed with cork and wax, discolouration on upper part. Inscription stamped near base.Stamp: [symbol of concentric ovals], text within the symbol "PORT DUNDAS POTTERY COY." and "GLASGOW". Stamp:[Symbol - square with short vertical line in centre of base line]flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, shipwreck artefact, stoneware, ironstone pottery, bottle, port dundas pottery, glasgow, antique bottle, william johnstone

Brown Ceramic bottle with McWilliams cork. 25 cm high Previous label #134 Ex Mechanics Institute Eaglehawk

Ceramic port decanter in shape of a 7.62mm round. Rising Sun logo on front. Tip of round is removeable to house cork.History of 7.62mm round. 84, F4 on base.port decanter, 7.62mm round

8712.1 - Cast iron cork press with three differently sized indentations that in straight rows, the item is also fairly ornate.8712.1 - Kenrick Sons No. 6