Catalogue card reads, "Diesel engine No. 1157 involved in derailment at Wantirna Road Bridge". The Newsrail archives March 1969 Edition of 'Divisional Diary' (Newsrail's predecessor) had this article on page 10. The other image is from Ringwood Mail 5th February 1969.

Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. The Bulldog Engineering Company emerged around 1886. J Abraham began the operation building windmills and pumps. An employee, J F Osbourne, purchased the business when Abraham died in 1914. Windmills were still produced but Osbourne began to manufacture the "Bulldog" oil engine towards the end of the first world war. The Bulldog engine production was around 400. Of these there were 40 with wavy spokes. Some writer have been using Ballarat Bulldog as the brand name. This is incorrect, it was just Bulldog, made in Ballarat. Production ceased in the late 1920s.Coloured shield shaped decal design on white painted metal plate. Paper surround damaged.Bulldog Trade Mark. Manufactured by the Bulldog. Engineering Co Pty Ltd, Ballarat. Re No - 27,331zilles, bulldog engineering, ballarat, decal, j abraham, windmills, pumps, j f osbourne, bulldog oil engine, wavy spokes

Black and white photographs - 2 copiesTyped below photograph, "Boiler explosion at Ringwood station 20/6/1894. Heard in Box Hill". Article from newspapers:- Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 27 January 1894, page 21 Official enquiry. The Board of Enquiry appointed by the Railway Commissioners to enquire into the causes of the boiler explosion which shattered the locomotive at Ringwood on Saturday night, assembled at the Railway department on Wednesday to commence its deliberations, The board consisted of Mr R. Fulton, engineer, C. W. McLean; engineer to the Marine Board, and Mr Mephan Ferguson, iron-founder. There is some difficulty at the outset about the constitution of the board; It was suggested that the Apt of Parliament contemplated that boards of experts, after the manner of the present one, needed, to have their appointments confirmed by the Governor-in-Council. The point, however, was not considered sufficiently important to prevent the board from proceeding with evidence. Robert Greyford, stationmaster at Ringwood, was the first witness. He said he saw the explosion on Saturday night at about twenty minutes to 8. There was a rush to the engine to see what had happened, and the driver and fireman were both found on the platform of the engine. The driver seemed badly hurt, but the fireman, to all appearances, was not so badly injured. They were both attended to and sent up to Melbourne by the last suburban train. Witness had a look at the engine and found the dome and all the plates round the boiler blown clean, away. The springs were also blown clean away. The Chairman (Mr Fulton) : Did you measure the distance ? Witness: Yes; one of the plates was 209 yards away. A piece from the top of the boiler 15 pounds in weight he found driven into the hard beaten track 410 yards away. Several pieces of boiler plate were found scattered at various distances. The buildings roundabout were injured. The Chairman; Did you notice anything peculiar about either of the driver or the fireman ? — No ; nothing wrong, with either of them. If the engine was blowing off at all, it must have been very light. In your opinion, were they perfectly sober ? — Perfectly. In approaching the station, is there a down or an up grade? — A very slight down grade. How is the road from Healesville ? — Up and down all the way. It is down, grade for about 200 yards coming into Ringwood station. They shut off ; steam about a quarter of a mile away, and come in at a good pace. They generally put on 15 pounds of steam while they are in the station. Mr Ferguson : Had the driver the usual load on ? — Yes ; about the usual load. Witness added that he had known the driver personally for about 10 years, and he had always been a careful, steady, sober man. He did not know the fireman so well. John Palmer, porter at Ringwood station, also saw the explosion. He was attending to the train on its arrival. He was knocked down by the force of the explosion. When he got up he saw the engine driver being carried into the office covered in blood. He noticed nothing peculiar about the driver and fireman, nor about the engine. Mr McLean : How far were you from the engine when you were knocked down ? — From ten to fifteen yards. William Paul, the guard of the train to which the injured locomotive Was attached, said he was looking at the engine at the very moment the explosion occurred. It seemed to come from exactly under the dome. The force of it took him off his feet. He was about 15 yards from the tender. When he rose he tried to reach the engine, but could not do so on account of the steam and coal dust. He called out to know whether any of the passengers were injured, and got no response, so that he concluded they were all right. All the lamps but about half dozen were extinguished by the force of the explosion, although the glass was not broken. He could testify most distinctly that the driver and fireman were both sober. The driver was a man who never drank. The steam started to blow off about a minute and a half before the explosion took place. The last place at which the engine took water was Healesville. The Chairman : Do yon know anything of the quality of the water there ? Is it creek water ? — Yes ; it comes from the Graceburn River. You never heard of its quality ?— No. How long have you known this engine on the road— About 13 months. Hew long have you known the driver on this line ? — About six weeks. I have known the fireman several years. The driver was a strict teetotaller, and I never saw the fireman take anything to drink in his life. Mr T. H, Woodroffe, chief mechanical engineer of the Victorian Railways, produced a report he had written to the secretary, about this explosion. The document gave facts concerning the engine and the explosion. It stated that the rapture seemed to have occurred at the rim of the plates adjoining the fire box. The engine was built at the Phoenix Foundry, Ballarat, in 1883. It was repaired at various times, the last time being in July of last year when it was sent to the Port Melbourne shops, and was then tested to a cold water pressure of 195 and found all right. It was the custom to overhaul all locomotives about every five years. The Chairman : There were no very heavy repairs in July, 1893; were there? — Not to the boilers. The shop manager's report says that the plug and safety tap holes were repaired, five new copper studs put in firebox, ash-pan door repaired, tender cleaned and overhauled, and studs re-rivetted, and boiler tested to pressure of 195, cold water. Mr Woodroffe read the report of the repairs effected to the boiler in December, 1888. That would be the time the plate was put in the boiler. On that occasion three new plates were put in the bottom and the boiler tested up to 195. The Chairman: Do you keep a record of the water used ?— Yes, the water in this case, I think, came from the Maroondah scheme. Mr Woodroffe said boilers were examined front time to time in the running sheds. In his opinion every possible care had been taken to keep the engine in proper care. There might, however, be lessons learnt from this. The Chairman: No doubt. From his examination of the plates [the] witness did not think the state of them could have been detected from the outside. There were no signs of leakage or sweating or anything of that sort. The next witness- was Walter Stinton, workshop manager at Newport and he said that the injured engine had been repeatedly repaired under his charge. He gave a technical account of the repairs effected on various occasions. The testing of locomotives was under his special notice. They had a high pressure pipe running; round the works, and a pump set at 2001b. When the boiler was pumped full of water the pressure when applied up to 1951b. The board appointed by the department to inquire into the Ringwood locomotive boiler explosion sat again at Spencer street on 25th inst. Mr R. Fulton presided and the other members of the board were. Mr Mephan Ferguson and Mr C. W. McLean. Charles Grubb, foreman of the boiler-makers at the Newport workshops, said he had inspected the pieces of plate that had been blown out of the engine, and after examining them, pointed out to the Chief Mechanical Engineer the portion where the plate had started to burst. It was under the lap, on the right hand side of the boiler. The grooving might be accounted for by bad water. During the past twenty years he had examined all the boilers that came into the Williamstown workshops, and while some were hardly marked at all, others were very badly eaten away. The practice was to cut out the defective portions. In this case the boiler was repaired in a similar manner. The Chairman : Can you suggest any other way of repairing so as to prevent accident ? — No, unless by taking out a plate on one side from the joint, and carrying it further up so as to avoid the joints meeting, or by taking out the plate altogether. What would.be the cost .of putting in a new " plate I—Perhaps about double the price; but I wouldn't recommend that course. It would be putting a new plate against plates that have been in use ten years or so and that would not be advisable. I think the present system better. I consider the present system of repairing the best. This is the first we have had so bad like that, to my knowledge. You attributed this to bad water. Is there no other probable cause ? — Well; unless the iron be bad. This was Lowmoor iron. I think this accident was caused by the eating away of plates. This one was the worst I have seen, for the short time it had been running. We use three classes of iron — Lowmoor, Monkbridge and Bowling. By Mr Woodroffe (Chief Mechanical Engineer) ; There are engines still running that were repaired at the same time as this one, in 1888, and. in the same way. These are engines 339 and 333. They have been recently examined and are in splendid order. What in your experience, is the age of a boiler on the Victorian railways? — From 17 to 20 years our earlier boilers stood. The later boilers don't stand so well. How is that? — There is difference in construction, and the material is lighter. The old boilers had thicker plates. Have you been asked in any way to curtail boiler affairs? — No, sir; nor in any way. You have never hesitated to carry out any necessary repairs? — Never. Our orders have been to exercise every care in examining, repairing and renewing boilers. Witness said that his practice was when an engine came into the workshop to find out how long she had been running. If over five years, he informed the workshop manager, and they thought it necessary the tubes were taken nut. If everything was in good order witness reported to the manager. The cost of taking out the tubes and putting them in again was about L20. Mr Woodroffe : Have you ever hesitated to repair a boiler on the score of expense ? — No, never. Mr McLean : Hew do yon ascertain whether a boiler requires repairs?— I keep a record of every boiler examined. From every boiler that comes in I have the dome covers taken off, and when it is practical I get inside. l can almost tell from the top of a boiler what the bottom is like. If there is any doubt about it I have the tubes taken out. If I have suspicion of defective plate I cause to have bored a triangle in the plate at the point where there is the most wear. There is a travelling inspector who visits all the running sheds of the colony except Port Melbourne and tests the boilers. He reports to us and we note what he points out. Alfred Thompson, locomotive inspector of the eastern section, said he knew this engine, 297R. He read a list of her repairs. He heard of the accident on Saturday night and went up to Ringwood. The Chairman : Did you ever notice anything peculiar about the engine? — No, I considered her A1 and would not have hesitated to have put on 140lb pressure owing to the repairs she had undergone. Witness considered that the explosion was caused by the expansion and contraction of the plates ; and, no doubt, the plate had been eaten away through bad water. The other side of the boiler showed: signs of corrosion: By Mr Woodroffe ; Is every care taken with the boilers ? — Yes, every possible care is taken for the safety of boilers, Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 27 January 1894, page 7 EXPLOSION OF A LOCOMOTIVE BOILER, NARROW ESACPE FROM FATALITIES. THE DAMAGED ENGINE. [See drawing of loco – saved in “Railways” folder] The explosion of a locomotive boiler at Ringwood on Saturday evening, formed the subject of much discussion in railway circles on Monday. The Minister arrived at the office at an unusually early hour and immediately entered into a consultation with the acting chairman, Mr Kibble, and Mr Commissioner Murray. As the result of the interview it was resolved to ask three gentlemen of acknowledged engineering experience to sib as a board with the . object of inquiring into the cause of the accident and furnishing a report. Mr Richardson and the Commissioners are tally seized of the importance of having a searching investigation into the accident, and, with Mr Murray, the former went to Ringwood to inspect the scene of the disaster. They will he accompanied by Mr Woodroffe. During the morning no official report had come to hand from the driver or fireman of the engine in reference to the accident, but that is thought to be due to the circumstance that they have not sufficiently recovered to be able to give a circumstantial account of what occurred. The engine was one of the old R's, and, Mr Kibble pronounced them to be about the best class of engines used. So far nothing can be said as to the probable cause of the accident, as the broken plating of the engine has not been submitted to the inspection of experts. Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 27 January 1894, page 7 STATEMENT BY THE FIREMAN. This morning Thomas Miles, fireman on the engine the boiler of which exploded on Saturday night, is suffering from an injury to the spine, as well as a very severe shaking to the system. He states that he was fireman on the engine attached to the train which left Healesville on Saturday evening, at ten minutes to 8. Everything went all right until Ringwood was reached, when, .just as the train was about to continue its journey, a load explosion took place and Miles remembers nothing more until he was picked np on the platform ; and found himself suffering from a pain in the back, and an injury to his arm. He cannot think of any reason which could have caused the explosion, as there was plenty of water in the boiler, and everything seemed working all right. Mr R. Fulton, consulting engineer, of Queen street; Mr McLean, a member of the Marine Board ; and Mr Mephan Ferguson, engineer, have consented to act as a board to inquire into the cause of the engine boiler explosion at Ringwood on Saturday evening. The board has been appointed under section 117 of Act 1135, which provides that the Governor-in-Council may direct the taking of a such a step. Mr1 Fulton will act as chairman of the board, which met for the first time at the railway offices, Spencer street, this forenoon. Before separating the members of the Board paid a visit to the Prince's Bridge locomotive sheds in company with Mr Woodroffe, the chief mechanical engineer, for the purpose of inspecting the shattered boiler. It has been stated that the explosion is known to have been caused by a flaw in a plate which was put on the boiler about four years ago, but enquiries have tailed to elicit anything in support of that view. The engineers connected with the department are not inclined to say anything on the subject. Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 14 April 1894, page 20 The Ringwood Boiler Explosion, The Minister of Railways has received the supplementary report of the board appointed by him to investigate the circumstances connected with the explosion of a locomotive boiler at Ringwood. In their first report the board did not attach blame to anyone. Mr Richardson felt satisfied that the responsibility of having the engines properly inspected and overhauled periodically could be fixed if the inquiry were extended. He therefore referred the matter again to the Board, who took further evidence. In the report now furnished, the Board hold Loco. Inspector Thompson blameable, but point out as a mitigating circumstance that he had not received "written instructions" respecting inspections and overhauls. Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 7 July 1894, page 32 The Ringwood Boiler Explosion. The Minister of Railways takes exception to the tone of a paragraph appearing in a morning contemporary respecting the Ringwood boiler explosion. It makes it appear that Mr Richardson has referred the report of the board which considered the facts connected with the explosion to the Crown solicitor simply because he differed from the finding of the board. The Minister explains that when he received the report he found that the responsibility for having boilers properly inspected and overhauled had not been clearly fixed. He personally obtained farther evidence on that point, and arrived at a conclusion, from which the commissioners differed. As he did not like to take upon himself the responsibility of deciding upon the effect of the evidence, he submitted the matter to the Crown Solicitor, but that officer did not furnish him with the information sought. He has, therefore, referred the question to the Attorney-General, together with the draft of a regulation respecting boiler inspections and overhauls in the future. Mr Richardson says that his whole aim is to have the responsibility positively fixed. Weekly Times (Melbourne, Vic. : 1869 - 1954), Saturday 28 April 1894, page 23 The Minister of Railways has completed his consideration of the supplementary report received by him from the Ringwood Boiler Explosion Board. The report, it will be remembered, held Loco-Inspector Thompson blameable for the non-inspection of the boiler, but considered there was extenuating circumstances. There was a certain amount of doubt as to the absolute instructions given for overhauling engines periodically. Mr. Richardson is sending the report on to the Commissioners with instructions that the responsibility respecting inspection of boilers shall be made clear for the future.

The Moffat Virtue Company was founded by John Moffat (1841 – 1918) and William Virtue (1863 – 1926) in Sydney. Both men were born in Scotland, John Moffat was a mining entrepreneur who migrated to Queensland in 1861 and began mining in the far north of Queensland. William Virtue was a talented mechanical engineer who became acquainted with John Moffat through their mutual involvement with the New Jerusalem Church and the teachings of theologian Emanuel Swedenborg. Moffat invited Virtue to migrate to Queensland, which he did with his young family but they finally settled in Sydney. Moffat had become interested in shearing machines and Virtue’s engineering skills enabled the registration of several patents in 1891 – 1894. The Moffat Virtue alliance grew and prospered and by 1911 all the entrants in the first sheep shearing competition at the Sydney Royal Show chose the company’s machines. By 1914 Moffat Virtue was a household name in rural Australia due to manufacture of agricultural machinery and household appliances. The company began making petrol engines in 1920 at 205 Clarence Street, moved to 11 – 25 Palmer Street in 1929 and later moved to Rosebery. The petrol-kerosene engine was popular as the use of kerosene made it very cheap to run. The motor starts by using petrol and once the engine is warmed, the vaporiser is activated which enables the use of kerosene as the running fuel. The carburettor and cylinder head are designed to ensure thorough vaporisation and complete combustion of fuel, resulting in maximum horsepower at lowest fuel consumption The serial number indicates 1944 as the approximate date of manufacture.Green petrol engine with red trim and crank handle. Attached to green grain grinder“Moffat Virtue Petrol Kerosene Engine No. 9142 1000RPM 3HP Change oil every 90 working hours SAE 40 For severe service and in Summer SAE 30 Warranty void unless above instructions followed” farm, machinery, stationary engine, crank, belt driven, engine, churchill island

John Eric Wiles VX16067, refer Cat No 5410P for his service details.Drivers licence fold over grey buckram covers with page pasted on inside, cover has rising sun at top, inside form A.A.F.G.11 No 17347, details handwritten in of the driver, signed by the driver, all other print in black.Inside in black pen, "VX16067 Driver Wiles, John Eric AIF"licence, drivers, accessory, wiles

Another excursion train travels to Beech Forest in 1960. At Gellibrand railway yards engine G42 leads the train with driver L. Moore and fireman, Les Ogden.B/W. Locomotive G42 and an excursion train to Beech Forest, on track number one, in 1960. The fireman, Les Ogden, hangs from the engine. The other tracks are empty.gellibrand; railway; loco g42;

Murray Comrie Collection. Monochrome photograph depicting wooden building being moved by traction engine. This is probably the building built in the 1850s as the Welsh Church in Tarnagulla. In 1893 the church was sold and the building was removed to Llanelly, where it was remodeled and became St. David's Church of England and served as such for quite a number of years. It is probably this move which is depicted in this image. During the early 1970s, with the decline in population at Llanelly, it was necessary to close the church which was sold and removed to Bradford for a private amenities hall. This photograph is a reasonable copy from an older original. Copy probably made by Murray Comrie in the late 1960s. tarnagulla, llanelly, bradford, churches, welsh, religion, buildings, transport

Murray Comrie Collection. Monochrome photograph depicting wooden building being moved by traction engine. This is probably the building built in the 1850s as the Welsh Church in Tarnagulla. In 1893 the church was sold and the building was removed to Llanelly, where it was remodeled and became St. David's Church of England and served as such for quite a number of years. It is probably this move which is depicted in this image. During the early 1970s, with the decline in population at Llanelly, it was necessary to close the church which was sold and removed to Bradford for a private amenities hall. This photograph is a reasonable copy from an older original. Copy probably made by Murray Comrie in the late 1960s. tarnagulla, llanelly, bradford, churches, welsh, religion, buildings, transport

1912 Talbot ambulance, 12 horsepower Clement Talbot engine. Vehicle body chassis and engine are original. Rear body is a replica 1914-18 ambulance. The vehicle was used in the filming of "Anzacs" feature film.Four-wheeled motor vehicle used as ambulance. Body painted Khaki green. Canvas hood and Red Cross symbol on side of hood. No 10914 appears on the side of engine compartment.talbot, ambulance, motor vehicle, clement talbot engine, first world war

Tait collection: item 40 of 62 This document gives the details of the Will and Probate of Edward Jones, an engine driver who died in Warrnambool in January 1895 at the age of 69. He had previously been a resident of Port Fairy. He left real estate to the value of £640 and personal estate to the value of £187. The beneficiaries of the will were his daughters, Margaret and Mary Jones. The lawyers connected with this document were Ernest Chambers and the legal firm of Fletcher and Mackay. Ernest Chambers had legal offices in Port Fairy, Koroit and Warrnambool at the end of the 19th century and the beginning of the 20th century and the signatures of two of his law clerks, Thomas Goodall and John White are included in this document. James Fletcher had a legal office in Port Fairy and in Warrnambool in the 1870s and in Warrnambool in the 1880s (Koroit Street). In the late 1890s he commenced a partnership with George Mackay who had previously had his own practice in Warrnambool. In the 1920s the firm became known as Mackay and Taylor and later Mackay Taylor (Kepler Street). This document was in the possession of Ernest Chambers and was passed down to successive lawyers occupying the Kepler Street premises. It was located in 2014 with other documents in these premises last occupied by the firm of Mackay Taylor. This document is of some interest as it gives details of the Will and Probate of Edward Jones who had been a resident of Warrnambool in the late 19th century. It will be useful for researchers. This is a cream-coloured piece of parchment paper folded in two and containing handwritten material on three sides of the paper. It gives details of the Will and Probate of Edward Jones of Warrnambool who died in 1895. The pages have printed red lines on the edges of three pages. The written material is clean and readable.In the Supreme Court of the Colony of Victoria In its Probate Jurisdiction in the Will of Edward Jones late of Warrnambool and formerly of Belfast in the County of Villiers in the Colony of Victoria Engine driver deceasedfletcher and mackay, lawyers,, warrnambool, ernest chambers,, edward jones, tait collection

Cylindrical lawn mower with grass catcher. Green painted catcher and engine cover, orange petrol tank and handles. Pull start with engine control on RHS handle. Name prominantly printed on front of catcher "Qualcast / four stroke / Super 12". Sticker on engine "Stowmarket, SIP (in a red diamond background) Suffolk / Engine type 75G14 Model No. 25A / Made in Englsnd / Recommended Lubricants" followed by a table of lubricant makers and oil specification.machinery, lawn mowing

Robert Ashton Lister was born in England in 1845 into an industrial family. After attending the Paris Exhibition in 1867, Robert argued with his father and formed the R.A. Lister Company to produce agricultural machinery at his factory in Dursley, England. In 1889 he linked his machine with Pederson’s cream separator which now ran at a consistent speed due to a spinning centrifugal separator thus producing consistency of cream. It was marketed through the Commonwealth and Robert himself drove right across Alberta in Canada with horse and buggy to promote the machine. He also expanded the use of his machine to sheep shearing. In 1909 the Company acquired the rights to manufacture petrol driven engines. When World War 1 began in 1914 the Company focused on producing petrol engines, lighting plants and munitions for the War Department, the workforce was mainly female as the men enlisted and left for the Front. After the War, Robert Lister retired, and the Company was taken over by his grandsons Robert, Frank, George and Percy with A.E.Mellerup. Their father Charles represented the Company in North America and Europe. Foreign competition and over supply of second-hand ex-military engines and lighting sets saw profits drop but the Company managed to recover under the leadership of Managing Director Percy. In 1929 the Company designed the CS (cold start) diesel engine producing 6-7kW which became known as the Lister 9-1. The engines were all painted the same shade of Brunswick green. By 1936 Lister was producing a wide range of petrol and diesel engines most of which were small at 1.5 to 3 horsepower. These could be bought ‘stand-alone’ or powering a complementary range of pumps, churns, cream separators, auto-trucks, generating plant and sheep shearing equipment. The most successful was the D Type Lister introduced in 1937 most of which were rated at 1.5hp at 700rpm. More than 250,000 were sold up to 1964 and although RA Lister ceased production many years ago, hundreds of these engines are still in use today.Green Lister Stationary Petrol Engine Serial No. 16268. It is the smaller of two Lister engines in collection. It was made in 1924, Dursley, UK. The two engines in the collection are petrol engines from the 1920s predating the more numerous diesel engines manufactured from 1920 on.farm machinery, stationary engine, machine driven, belt driven

The 1982 Ford V6 engine, built at the Ford Essex Engine Plant at Windsor in Ontario Canada, was released by Ford for installation in a number of car and light truck models manufactured in Canada, United States, Mexico and Venezula. Production probably exceeded 7 million items. The Australian Gliding Museum’s exhibit was an engine converted for aircraft use that was bought for the Gliding Federation of Australia “Auto-Tug” program from Javelin Aircraft Company in Wichita in USA. “Auto-Tug” was an experimental program sponsored by the Gliding Federation of Australia to equip a glider – sailplane Piper Pawnee PA-25-150 tug with a water-cooled engine to alleviate the costs of running and maintaining the Lycoming engines fitted to Pawnee tugs in Australia. The program began in 1988 and was aimed at obtaining limited certification for converting dedicated glider – sailplane tow planes. The engine equipped with modified intake manifolds produced 198 hp for flight with the same propeller RPM for take-off as the original Lycoming 0-540 engine. However, fuel consumption was halved as the water cooling of the Ford engine enabled quicker descents with throttle closed following the release of the sailplane. Based on the results of GFA’s program, CASA concluded that engine was quite suitable for an aircraft installation and rated it more reliable than the equivalent Lycoming and Continental aircraft engine. The use of the 1982 Ford V6 engine type for Pawnee tug conversions was discontinued when the General Motors LS1 5.7 litre V8 became available. It is understood that a small number of conversions have been done using the LS1 engine. This brief history is based on information obtained from Mike Burns and David Sharples who were involved in the Auto-Tug program from 1988 to 1992. Technical information relating to the 1982 Ford V6 automotive engine is contained in a paper by D.L. Armstrong and G.F. Stirrat of the Engine Engineering Office at Ford. Indicative of technological experimentation in the sport of glidingFord auto engine mounted on mobile standaustralian gliding, glider, sailplane, auto-tug, pawnee, tug, auto, engine, motor, ford, gliding federation of australia, burns, sharples.

Sepia photo. Prince of Wales Mine, engine drivers and miners picnic. 32 men and boys in photo, one boy on bike. Drinks can be seen on the ground. Markings/Inscriptions: front; Prince of Wales Mines, Engine Drivers and Miners Picnic. Eaglehawk. Rear; John Lightfoot, Brazier St, Eaglehawk. Engine driver and miners. Prince of Wales Group of minesW H Robinsonorganization, business, prince of wales mine, w h robinson, photographer, mundy street, bendigo

Commonwealth Government Engine Works prior to demolitionAustralian Government Engine Works, Port Melbournecommonwealth government engine works

This book was part of the Ballarat School of Mines LibraryA deep red plain cover with John Wiley and Sons name near the bottom of the spine using gold colour. Includes beautiful line illustrations.Bookplate - " School of Mines Ballarat / No. 1253 / Date 28 / 92"ballarat school of mines, ballarat school of mines library, steam, steam engine, ballarat school of mines library book, bookplate, experimental engine