Showing 2681 items
matching fly-wheel
-
Whitehorse Historical Society Inc.
Book, Pens, pots and pallets, 2002
A history of the Mitcham Arts Association.A history of the Mitcham Arts Association. A revision of the earlier 'The Pen, brush and potter's wheel'. The history covers the period from 1962 to the move to Silver Grove in 2002 and notes the change of name to Whitehorse Arts Association.A history of the Mitcham Arts Association. mitcham arts association, whitehorse arts association, mitcham writers group, humphreys avenue, nunawading, no 16, silver grove, nunawading -
Orbost & District Historical Society
ship's wheel, tiller, late 1800s
This is the tiller from the SS Stormbird which traded for the Orbost Shipping Company (1906-1915) between Marlo and Lakes Entrance. Mr Peter Nixon (Min. for Transport and for the Navy, 1970s) and Mr Arthur McMullen had the wheel and mast which had been recovered from the wreck of the SS Stormbird in New Guinea. Mr Nixon donated this wheel to the Orbost Historical Society in 1969.The S S Stormbird was an auxiliary-ketch which was owned by the Orbost Shipping Company (Henry James was the principal shareholder and manager of this company). It, along with the Coringle and the Wongrabelle were the main steamers owned by this company. These boats also carried sails. The significance of this item lies with its association with the shipping trade which serviced this region prior to the railway coming in 1915/16.A ship's tiller wheel, made of wood and faced with brass. The wood is painted black. It has eight spokes and handles to grip in order to steer a boat/ship. Two of the grips have strong rope or wire rope wrapped around them.ss stormbird orbost-shipping-company ship-fitting -
St Kilda Historical Society
Certificate, Mavis Covett, c. 1936
Mavis Covett at the wheel of the family Singer 11 at the Colac Gardensblack and white photograph good conditionI located this picture when sorting papers and must include it in my SCRAPBOOK� Memories of a wonderful journey with Dad, mother and Mavis� just over 600miles through Ballarat, Horsham, Mt Gambier, Portland, Camperdown, Warrnambool, Geelong back to Melbourne. Easter 1936. Mavis and I took turns at the wheel.. cost was unbelievable abour 7 pounds plus a few meals (bed and breakfast was 5/- only) petrol about //1/3d 1/2er gallon. Mavis Covett at wheel of our Singer 11 car. Mother is in back seat. Colac gardens. -
Melbourne Legacy
Document - Article, Increasing role of the legatees
An article from the Camberwell Free Press in 1987 of an interview with Legatee Dick Wheeler. He tells of the sense of wartime mateship that led him to join Legacy. He was one of 30 Legatees that worked with widows and children in Hawthorn/Camberwell area providing advice and financial and practical assistance with welfare, housing, education and personal development matters. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of a newspaper article about Legacy and Dick Wheeler, a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Photocopy of an article from the Camberwell Free Press Tuesday 25 August 1987 of an interview with Dick Wheeler.past presidents, dick wheeler -
Ringwood and District Historical Society
Painting - Oil, Charles Wheeler, Orchard In Wantirna Road - oil on board. Unsigned, reportedly by Charles Wheeler (1881-1977), c.1900
Charles Wheeler biography link http://www.portrait.gov.au/people/charles-wheeler-1881 Painted by a prominent artist. Refer to Sir Ronald East's history of the Greenwood family pp. 336-371, noteably page 343 that mentions about Henrietta Carr, only daughter on George F. Carr, who married AV Greenwood in 1896. Also reference to The Wattle Club pp. 356-7. Thus giving the connection of the Greenwood and Carr families, the subjects of Charles Wheeler's painting.Painting in glass-fronted frame.Typewritten notation behind the frame - "Greenwood oral family history says that this unsigned painting was done by Charles Wheeler as a demonstration for Rose Greenwood, (A.V. Greenwood's sister). They shared a studio at the Wattle Club Hall at Box Hill circa 1890s. The subject matter was said to be Grandfather Carr's orchard in Wantirna Road (Ringwood - Still standing in 2003). Source: Mary Greenwood, youngest Granddaughter of A.V. Greenwood." -
The Beechworth Burke Museum
Postcard, 1920
This postcard depicts the set-up of an abandoned gold mine. This includes a water wheel and other mining implements next to a creek. The postcard inscription indicates that this image is of the remains of the Wallaby Reef battery and water wheel. Wallaby Reef was discovered in 1864, and a prospecting claim established a four head battery and water wheel. Quartz was mined there, with gold also discovered at this location at a later date. By 1878 the mine was no longer resulting in rich deposits, this resulted in the miners moving their search for gold closer to the river where they were able to access more gold. This was in approximately 1879. In 1882 a rich deposit was found. In 1908 the battery was closed, and the mine finished. This photo was taken in 1920 and shows the deterioration of the site since its closure. Gold mining was crucial to the development of the Beechworth area. It has strong research and historical value because the clarity of the photo shows all the minute details of the mining equipment. The text on the back also indicates the mine is the Wallaby Mine, which was used for 45 years to find gold and quartz. Therefore, due to the location being quickly abandoned, this site is a rich location for historical study on gold mining during the 1900s. It can provide important information on the types of tools utilised and the impact of the mining on the environment.Black and white postcard photograph on card.8169 Be / Also near Wallaby Reef Workings / Relics of Rechabite Reef (locality) workings. / Shaft in bed of creek. Wheel used to drive sheadd (?) / stamp battery too I believe near B'worth 1920?beechworth, mining, gold mining, quartz mining, wallaby reef mine, mine battery head -
Churchill Island Heritage Farm
Functional object - Iron wheel rim
Iron wheel rim for wagon wheelchurchill island, farm machinery, wagon, wheel -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Trousers
Green Wool Tailored Button Flyuniform, army -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Trousers - Battledress
Woolen Trousers Khaki. Button Flyuniform, 1952, army -
Flagstaff Hill Maritime Museum and Village
Book - Birthday Book, Raphael Tuck & Sons et al, The Dickens Birthday Book, 1901-1910
Birthday books are used to record the names and birth dates of friends and relatives. This one has a quote from Charles Dickens for each day of the year .The Dickins Birthday book was chosen a a gift to Clara Skirrow, given on January 19th 1911 by Mr and Mrs B Watson. The artist, Pilford Fletcher Watson (1892-1907) was a well established and prominent artist. He was born in London and lived in Sydney, a foundation member of the Australian Academy of Arts in 1887. His works included local scenery, architecture and the interiors of historic buildings. Many of his works were bequeathed to the State Library of New South Wales. The firm Raphael Tuck & Sons Ltd,, was a printer and publisher that operated in London from 1866 to circa 1960s. Its logo is the artist's easel, palette and brush. In 1960 the firm amalgamated with others to become the British Printing Corporation c. 1960. The fly page states that Ralph Tuck & Sons, Ltd. were publishers to Their Majesties, the King and Queen, and Their Royal Highnesses, the Prince and Princess of Wales. This would mean that this book was published in the period when King Edward VII and Queen Alexandra, and Prince George and his wife Princess Mary were able to use these titles, that is, from 1901 to 1910. This early 20th-century Birthday Book is significant for containing quotes by the famous writer Charles Dickins. It is also significant for being illustrated by renowned artist Pilford Fletcher Watson. Ownership of a rare and beautifully presented book like this indicates the value placed on keeping in touch with friends and family in the early 1900s. Charles Dickins Birthday books were published by the same firm, with a similar layout.Book, The Dickens Birthday Book; with 6 illustrations in Colour by P. Fletcher-Watson Publisher: Raphael Tuck & Sons Ltd Printed in England 1901-1910 Artist: P. Fletcher-Watson This padded red leather hardcover book has embossed gold text on front cover and spine. . The six colour illustrations throughout the book were by artist P. Fletcher-Watson; one is a portrait of Dickins. Each date of the year has a quotes from Charles Dickens' works and blank lines below. The drawing on the fly page depicts a stone building with side pillars and a logo in the centre of the horizontal beam. It has a gift inscription for Clara Skirrow on January 19th, 1911. There are several handwritten entries with names and years.Handwritten in black ink: "From Mr & Mrs B. Watson / To Clara Skirrow / With Best wishes / January 19th 1911" Illustration on fly page: Logo [artist's palette, brush and easel] Handwritten entries of names and datesflagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, dickins birthday book, birthday book, p. fletcher-watson, raphael tuck & sons ltd, 1901-1910, charles dickins, dickins quotes, illustrated, 19-01-1911, mr & mrs b. watson, clara skirrow, red cover, british printing corporation, king and queen and trh prince and princess, king edward vii and queen alexandra, antique book, rare book -
Mont De Lancey
Decorative object - Small Wheel Lorry Model, Mr Chas W. Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a brown short two spoked wheeled wooden tray with low sides drawn by a cream coloured horse. The horse has reins and a simple noseband.There is a single seat and footrest at the front for the driver. The wooden shafts are to control the horse whilst working and they have a silver chain attached on each side. It has four replica brown wooden wine barrels with silver rims in the cart.replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts, lorries -
Federation University Art Collection
Ceramic, Marion Popplewell, [Bowl with handles] by Marion Popplewell, 1974
Marion POPPLEWELL (1912-1998) Born Yorkshire Marion Popplewell visited relatives in Ballarat in the early 1940s. She loved Ballarat so much she decided to stay. She worked at a bank in Lydiard Street, opposite the Art Gallery of Ballarat, and lived in rooms above the Lydiard Street Shops. Marion enrolled in some evening classes at the Ballarat Technical Art School (a predecessor institution of Federation University Australia) conducted by Neville Bunning. He was nor overly happy with her small colourful jugs and vases, wanting her to handbuild pots, rather than wheel throw them. Marion Popplewell continued making her small wheel thrown pots with fine handles, and made glazes herself from materials imported from England. Attending classes in Ceramics up until the mid 1970s, she also took some classes in Woodwork and Needlework. Her 'Pink Glazed Jug' 1945 won a prize at the Royal Melbourne Show in the late 1940s. She died in Melbourne on 26 September 1998. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Wheel thrown vessel with 2 handles and turned foot. Bronze like glaze with some feint pearlescence and slight crazing. Inscription on base reads "MP 74," sticker reads "2"art, artwork, marion popplewell, popplewell, ceramics, ballarat technical art school -
Melbourne Legacy
Slide, Operation Float, 1959
A colour slide a junior legatee at the steering wheel of a ship during Operation Float. It is believed to be in 1959 as other slides that year were in the same brand of slide mount. Operation Float was an event run by Melbourne Legacy to take Junior legatees on an outing. It could have been to naval boats such as HMAS Cerberus or to a Yacht club. It gave the junior legatees the opportunity to see a naval boat in action, spend time on the water or try sailing. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of outings being organised for children.Colour slide of junior legatee at a ship's steering wheel with a legatee in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. operation float, junior legatee outings -
Melbourne Legacy
Slide, Operation Firewood, 1960s
Two colour slides of a steering wheel, dashboard and speedometer. One shows 65 miles per hour and the second 70 miles per hour. It was during Operation Firewood. Legatees would organise collection of wood from the country and distribute it to widows in metropolitan Melbourne. Other slides show the cutting and loading of wood and delivery to widows in metropolitan Melbourne. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of Legacy helping widows by sourcing, supplying and delivering firewood. When open fires were the main source of heating, a load of firewood and help moving it, would have been very important to the widows.Colour slide x 2 of the steering wheel and speedometer during Operation Firewood in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. Hand written on front of one '65MPH Warming up' and on the other '70MPH just cruising' in blue pen. Printed on reverse in red ink 'Processed by Verycolor photo labs. Melbourne, Victoria'.operation firewood, cars -
Port of Echuca
Black & white photograph
Black & white photograph of 2 men, 1 girl and 1 boy on upper deck of P. S. Kelvin. In the background is a 3rd man, Hugh Price, at the wheel. Documented as being on mail run and at the Murray BridgeDemonstrates passenger transport and travel along the river as well as the delivery of mail services between rural communities.Black & white photograph of 2 men, 1 girl and 1 boy on upper deck of P. S. Kelvin. In background is a 3rd man, (Hugh Price) at wheel. Documented as being on mail run and at the Murray Bridge Echuca.In pencil on back : Kelvinp.s. kelvin, murray bridge, mail run, paddlesteamers, murray river, hugh price -
Orbost & District Historical Society
brace and bit, first half 20th century
This carpenter's clamp would have been used in confined spaces where a full turn of the brace cannot be achieved. It is fitted with a pawl mechanism - a hinged or pivoted device adapted to fit into a notch of a ratchet wheel to impart forward motion or prevent backward motion. This item would have been used on a rural property in constructing or maintaining infrastructure.This item is an example of a woodworking tool used in the first half of the 20th century prior to the widespread use of power tools.A metal ratchet brace with a wooden handle grip. It has a hinged mechanism device which fits into the notches of the ratchet wheel - a pawl. The drill bit is jammed and the chuck is rusted.woodworking tool brace-and-bit carpentry -
City of Greater Bendigo - Civic Collection
Medal, School of Mines Silver Jubilee 1873 - 1923, 1923
The Bendigo School of Mines was opened in 1873 following the first report of the Technological Commission in 1869 which recommended the establishment of schools of design and science to meet the scientific and technical needs of the mining industry on the local gold fields. Initially mining, chemistry, geology, metallurgy and art were taught while a separate school of design was established in c. 1870 but incorporated into the School of Mines around 1883 when it was renamed as the School of Mines and Industry. In 1904 The Mechanics Institute was liquidated and its assets and buildings acquired by the School of Mines. Around 1907 a Junior Technical School commenced to operate at the School of Mines and Industry but ceased operating in 1961 with that function being transferred to the White Hills and Kangaroo Flat Technical Schools.Obverse; Ornate relief design made up of a coat of arms with mining icons in each quarter flanked by flags on either side. Per varios usus artem experientia fecit written in scroll underneath. Translation: Practice has brought skill through different exercises. (Manilius) Reverse; Outer wheel Bendigo School of Mines and Industries. Inner; 1873 /Jubilee /1923Obverse; Per varios usus artem experientia fecit Reverse; Outer wheel Bendigo School of Mines and Industries. Inner; 1873 /Jubilee /1923city of greater bendigo education, bendigo school of mines -
Ballarat RSL Sub-Branch Inc.
Photo Framed, RAAFA
Fly Boat Museum, Lake Boga, RAAFAphoto/pictures, ballarat rsl, ballarat -
Trafalgar Holden Museum
Equipment - Brass fly Terret
imported and sold by Holden and Frost during the late 19th century and early 20th century for the purpose of equine accessorysold by Holden and Frost as a rider accessory brass fly terrets as used in riders accessoryequine, military, recreational, c1900, fly terret -
Melbourne Legacy
Document - Article, Legatee Richard Wheeler, President 1986
A cutting from from a Melbourne Legacy President's report showing a photo of Legatee Richard Norman Wheeler (President of Melbourne Legacy in 1986). It was collected to be a record of a photo of past presidents. During World War 2 Dick served as a pilot with the RAAF and the RAF in North Africa, Italy and Yugoslavia. He joined Melbourne Legacy in 1976. The newspaper cuttings of his death notice from September 1989. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee Dick Wheeler a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.An article with a black and white photo of Legatee Richard Wheeler - President 1986 and two newspaper cuttings of his death notice.past presidents, dick wheeler -
Ballarat Tramway Museum
Photograph - Geelong tram body being fitted with a truck or wheelset
Provides information on how a tramcar body was fitted with a wheelset or truck (Brill Radiax EB1 type). Lifted on the jacks after delivery by a horse drawn jinker from the Railway Station (See Reg Item 8321) The wheel set is being pushed under the tramcar by another tramcar. Once fitted the tramcar would have been towed back into the depot and the motors etc connected. Has the Blakiston & Co. building in the background. Yields information about how tramcar bodies were lifted outside the Geelong tram depot in Brougham St in order to be made operational. Copy photograph on black plastic type backing with black edges of a Pengelley Adelaide built tramcar body on jacks being fitted with a truck or wheel set.geelong, tramways, pengelley, tram bodies, brill radiax truck, brougham st, trams -
Whitehorse Historical Society Inc.
Clothing - Trousers Army, c1939
World War 2 Army uniform trousers worn by Captain Noel West.World War 2Khaki coloured Mens trousers with fly with 3 buttons, hook at top, 2 buttons at back and 22 either side of fly. Pocket either side.costume, male uniform, military -
Bendigo Historical Society Inc.
Slide - BENDIGO SHOW, Oct 1970
Slide. Bendigo Show. The Big Wheel Ferris Wheel.slide, bendigo, bendigo show., bendigo show. -
Flagstaff Hill Maritime Museum and Village
Equipment - Ship's Wheel, ca. 1975
This is the whip's wheel that was on display for 40 years on the vessel SS Rowitta, installed on the lake at the Flagstaff Hill Maritime Museum and Village as an educational display and attraction. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. The ship's wheel is an example of the equipment used on a steam ship for navigation. This wheel is connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Ship's wheel, light coloured wood, eight turned spokes, brass hub in centre with square hold. The wheel was part of the display of the vessel Rowitta at Flagstaff Hill.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, flagstaff hill, maritime village, maritime museum, ss rowitta, navigation, marine technology, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, tamar river, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance, ship's wheel, ship's steering wheel, ship's steering, direction -
Clunes Museum
Functional object - TIME CLOCK, INTERNATIONAL BUSINESS MASHINES CORP, 1924
THIS TIME CLOCK WAS USED IN THE INTERKNIT HOSIERY CO. KNITTING MILL FROM 1946 - 1977 TO RECORD EMPLOYEES TIME SHEET WHICH IS PLACED IN THE GLASS FRONTED CUPBOARD BEHIND BEHIND AND WHEEL.BROWN VARNISHED CUPBOARD WITH TIME CLOCK ON FRONT. A LEVER WITH PUNCH LIKE DEVICE TO RECORD TIME OF ARRIVAL AND DEPARTURE OF EMPLOYEES. A DOUBLE ROW OF HOLES ROUND THE EDGE OF A WHEEL NUMBERED 1 - 100, BEING EMPLOYEES NUMBERS. INTERNATIONAL TIME RECORDING CLOCK.local history, horology, chronometers, knitting mill interknit hosiery co. -
Flagstaff Hill Maritime Museum and Village
Functional object - Ship's Wheel, 1871 or earlier
The ship building company E. & A. Sewall, from Bath, Maine, USA, built many ships that had wheels with the same decorative, starburst pattern on them as this particular wheel segment, including the Eric the Red. The wheel was manufactured by their local Bath foundry, Geo. Moulton & Co. and sold to the Sewall yard for $100, according to the construction accounts of the vessel. Eric the Red was a wooden, three masted clipper ship. She had 1,580 tons register and was the largest full-rigged ship built at Bath, Maine, USA in 1871. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, and was the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows that Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) - about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. On 4th September 1880 the ship had been sailing for an uneventful 85 days and the voyage was almost at its end. Eric the Red approached Cape Otway in a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. Captain Allen ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats, the mizzenmast fell, with all of its rigging, then the mainmast fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Cries were heard coming from out of the darkness. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts and bravery, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod, samples of wood and a medal for bravery. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Segment of a ship's wheel, or helm, from the wreck of the sailing ship Eric the Red. The wheel part is an arc shape from the outer rim of the wheel and is made up of three layers of timber. The centre layer is a dark, dense timber and is wider than the two outer layers, which are less dense and lighter in colour. The wheel segment has a vertically symmetrical, decorative copper plate inlaid on the front. The plate has a starburst pattern; six stars decorate it, each at a point where there is a metal fitting going through the three layers of timber to the rear side of the wheel. On the rear each of the six fittings has an individual copper star around it. The edges of the helm are rounded and bevelled, polished to a shine in a dark stain. Around each of the stars, front and back, the wood is a lighter colour, as though the metal in that area being polished frequently. The length of the segment suggests that it has probably come from a wheel or helm that had ten spokes. (Ref: F.H.M.M. 16th March 1994, 239.6.610.3.7. Artefact Reg No ER/1.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's-wheel, eric-the-red, helm, shei's wheel, ship's steering wheel -
Great Stupa of Universal Compassion
Ceremonial object - Prayer wheel, hand-held
A prayer wheel is used in Tibetan Buddhism for personal worship. Tibetans believe that spinning the prayer wheel which as thousands or millions of mantras inside is equal to saying that many mantras, while being done in a fraction of the time. This helps accumulate merits, purify negative karma and obstacles on the path to enlightenment. This wheel has a hollow metal cylinder attached to a rod handle, made of ivory (with carved elephants), inlaid with coral and turquoise. Inside the cylinder is a tightly wound scroll printed with numerous mantras and wrapped around a spindle. The cylinder is embossed and decorated with inlaid coral and turquoise. A chain with a small weight at the end (made out of copper alloy) is affixed to the cylinder, allowing it to be spun by a slight rotation of the wrist. tibetan buddhism, holy objects, worship devices -
Ballarat Tramway Museum
Newspaper, Bacchus Marsh Telegraph, "Loved Tram changes diet", Sep. 1995
Newspaper clipping from "Bachchus Marsh Telegraph", 9/1995? about the relocation of ex MMTB W2 340 from the Hungry Jacks Restaurant Melton to Greendale and Mr. Robert Lilburn who attended the loading of the tram. Has a photo of Bob, holding a trolley wheel ex Geelong as well and some details of Bob as a tram enthusiast. Date: - Assumed to be 25/9 by notation on cutting and that the tram arrived in Melton in 1989 and was being moved six years later. No date on the cutting and on the rear page is an advertisement from KFC Bacchus Marsh opening in November 1995 and seeking staff.On cutting "Trolley Wheel Geelong 19", "Tram 340 25/9 Mon 9am) and "Bacchus Marsh Telegraph".geelong, tramcars, melton -
Whitehorse Historical Society Inc.
Machine - Chaff Cutter, c1890
Large caste iron wheel on which two knife cutters are fitted - hand rotated - material to be cut is fed through a canter-levered wooden box - reduction gears are used to ease the effort for the person operating it. All of this is mounted on a caste iron frame. Capable of cutting 'I/2 . 1/2 Chaff'|Similar one sold by Welch, Perrin & Co P/L in 1929 for 8 pound .The 'Bentall' Chaff Cutter moulded on the reduction gear cover. 'Bentall Improved (or Patented?) Chaff Cutter 913 Heybridge, Maldon, England' - on the body and wheel.rural industry, livestock -
Flagstaff Hill Maritime Museum and Village
Equipment - Ship's Wheel, 1922
This ship's wheel was hand made from wood and metal using a recycled cart wheel. It originally belonged to the "Reginald M", a 2 masted, flat bottomed, coastal trading ketch with single chine. The REGINALD M The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. The Reginald M’s purpose was to serve the coastal trade of South Australia, to carry cargo cheaply and efficiently. It is believed that the keel was in fact hewn from two telegraph poles! Its builder frequented all the salvage yards for materials and fittings. Reginald M had a very shallow draft and a flat bottom that enabled it to come close to shore and to sit high and dry at low tide or to be beached on sand. The flat bottom was also to make the ship able to skim over reefs. Wagons could load and unload direct from her side. Her cargo included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. On April 9th 1931Reginald M weathered a large storm in St Vincent Gulf, SA. The vessel suffered much damage; mast snapped and the crew laboured for four hours to free her by chopping off the past and rigging. The crew patched her up and slowly returned to Port Adelaide with only a portion of the insured cargo being damaged. Her crew members at the time were owner Mr John H Murch of Wells Street Largs Bay, Skipper Mr R Murch – John’s brother, Murray – son of Captain Murch and Seaman John Smith. Reg Webb purchased Carribie Station, at Marion in the Warooka District, south of Adelaide, in 1921. He cleared the land and farmed sheep and grain. In 1923 he shipped his own wool and grain from Marion Bay, having first carted 300 bags of the barley grain, 12 bags at a time, along the unmade track to the jetty. A photograph donated to Flagstaff Hill, dating about 1929 - 1942, shows two men on the Reginald M, holding between them their fishing catch of a large hammer shark. The photograph is stamped “GRENFELL STUDIO PORT LINCOLN PRINT” and titled “hammer shark caught on Reginald Emm”. The donor’s family lived on the Your Peninsular and despatched their grain from a chute at Gleeson’s Landing to the awaiting transport vessel. Reg knew the Murch Brothers from Port Adelaide. The brothers had been using their ketch REGINALD M to ship Guano from the Islands, led by Captain Richard Murch. Reg approached them in 1934 about shipping grain from Marion Bay. The brothers visited the bay and thought it was an ideal place. They showed Reg where to stack his grain and they measured up the cliffs. When Reg was ready, they brought down and installed a ninety foot wooden chute. The bags of grain were then individually sent down the chute, landing in a waiting small boat then rowed to REGINALD M, 14 bags at a time. After 10 hours REGINALD M would be fully loaded with 1300 bags of grain and shipped to waiting ports. At one time a wild storm destroyed the chute but it was rebuilt and strengthened. REGINALD M was involved in shipping the grain from there until 1938. In 1940 Able Seaman Allan H Lucas served on Reginald M between September and December, being engaged and discharged from Port of Adelaide. His Certificate of Discharge was signed by ship’s Master W S Murch. It seems that at some stage Reginald M was used as a Customs vessel, as one photograph in Flagstaff Hill’s collection shows “H.M.C. No. 3, Pt Adelaide” on the bow. In 1969 the last freight left Marion Bay on the ketch REGINALD M carrying grain, wool and explosives. In late 1970 she was sold to the Mt. Lyell Mining and Railway Company and was used by them as a barge to carry explosives. In 1972 the Navy League of Strahan, Tasmania, purchased her for use by the Strahan Sea Cadet Unit to use at Macquarie Harbour and renamed her T.S. Macquarie. However this plan for use of Reginald M did not come to pass. In 1974 Mr. Andrew Rennie, of East Brighton, Melbourne, bought her for a similar purpose. , paying $5,000 and donating a ‘Cadet of the Year” trophy to the Sea Cadets. He sailed her from Strahan to Melbourne, planning to use her for pleasure sailing. Also in 1975 Reginald M was sold to Melbourne Ferry Company at auction. Later in 1975 the Reginald M was bought by Flagstaff Maritime Museum for $20,000 . She has been restored and is now one of the exhibits in the Village lagoon or lake. It was restored in 2006 using funds from a $4,000 government grant. This ship's wheel is significant because of its association with the REGINALD M. REGNIALD M was a coastal trading ketch from South Australia built in 1922. It is one of very few sailing coastal trading vessels still extant, and its flat bottom, single chine shape illustrates a very simple but robust method of construction, compared to other round bilged examples of trading vessels. She is now listed on the Australian Register of Historic Vessels (ARHV Number: HV000562.)Ship’s wheel, also called a Helm, eight spoke design. Centre of wheel is handmade of wood and has iron rings around each side. The spokes are fitted into this wooden hub. The outer wheel has an iron ring on one side and sections of a wooden ring on the other. There are both original and modern bolt and screw fastenings. The wheel has remnants of black paint. This ship’s wheel was originally fitted to the ketch REGINALD M and removed during its restoration. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's wheel, hand made ship's wheel, coastal trader, reginald m, ketch, john murch, ch murch, reg webb, carribie station, mt lyell copper company, queenstown navy league, andrew rennie, melbourne ferry company, r.f. dale