2 sheave wood block brass sheaves attached to rope painted green to topflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Black glass beaded bag, with woven rope-like handles and cream silk lining

84440.1 - Hessian bag with rope "drawstring", to which, at the bag opening, are attached metal "handles".

Sent from Germany to survivor of Kormoran POW Camp13Circular canvas bag with reinforced base. Metal eyelets around top, threaded with ropeW. Elmecher 985tatura, personal, effects, travel, goods

A line firing rifle used in rescue training by the lifeboat Queenscliffe crew from 1926 to 1976.A rare representation of old life saving line throwing mechanisms in use up to the 1970s. Metal breech loading gun with wooden stock and rope canaster for attaching rescue line Trade Marks, B.S.A., [three rifles leaning together].lifeboat, rescue, line firing, queenscliffe, rifle, bsa, birmingham small arms company

The line throwing apparatus has been in use for several centuries, in a wide variety of forms. It initially started off as manually launched lines that had shorter ranges and were not very accurate. They faced problems on wind-powered boats and ships since they were dependent on wind speed, wind direction, and the operator accuracy.Modern-day line throwing apparatus are powered using rockets, pneumatic systems, or slingshot mechanisms. They fall under two main categories of propulsion- pyrotechnic, and pneumatic. Pyrotechnic systems make use of an ignition that is used to launch the line, whereas pneumatic systems make use of built-up pressure. Pyrotechnic systems are volatile and can be extremely dangerous due to accidental ignition. In response to growing concerns about the safety of pyrotechnic systems, pneumatic based launchers were invented and widely implemented in the late 20th century.Yellow line throwing device consisting of a canaster containing rolled rope and a firing mechanismPains-Wessex Speedline International. Pt No 5151-01/02speed line, line throwing, marine rescue, pyrotechnics

A small coloured photograph of eight children in the school ground. One is playing with a skipping rope.schools, bulla primary school

wooden box with rope handles , metal brackets and a metal bracket to hold lid down.40 Grenades Aldershot Lot 548 7/58 Box No 4wark vc club, ces, ammunition

Skip token used by miners to identify which skips they had filled.833.1, 833.2: small brass diamond with rope attached through a hole in the top corner."5"

Large Legacy torch symbol on a yellow background. Legacy used gold/yellow as an official colour until the mid 1990s. This flag could be one that was flown at the Shrine flagpoles as it is labelled 'Legacy' on the top left corner and is about the size required for the Shrine's flagpoles. The maker was Evan Evans of Melbourne and the label said they supplied flags for the XVIth Olympiad - which was Melbourne in 1956; and the VIIIth Commonwealth Games which was 1966. The flag dates from about that time.A record that the Shrine flew the yellow Legacy flag at special Legacy events.Very large yellow Legacy flag with rope and metal attachments for flying on a flag pole.Makers label says "Evan Evans Flags, 300 Elizabeth St Melbourne. Official Flag Makers for XVIth Olympiad and VIIIth Commonwealth Games. 75% Nylon 25% Wool".legacy promotion, logos

Use in agriculture ca1900We believe it was imported by HOLDEN and FROST for agricultural use ca 1910Brass cylindrical bell, brass tubular clanger, circular finger holder with rope attachedagriculture, ca 1910

Issued to Norman Charles Stevens VX123648 2nd AIF. Initially enlisted as V59636. Enlisted 9.3.43 age 26 years. At discharge from the AIF on 28.6.46 he was a Pte in the Australian Army Catering Corps. Kit bag, khaki colour, sausage shape with brass eyelets at top for pull rope.“Stevens N.C VX123648”military-equipment, kit bags

Digital image of a newspaper cutting from a Melbourne paper, dated 21/10/1963, titled late 1960's or 1970. Notes the placement of an emergency rope, with a drawing of how it works, following the Union ban after the death of a driver in a fall from the roof. Has a sketch of tram 720 showing the rope arrangement, a man using the rope to position the trolley pole and the broken rope. Quote Clarrie O'Shea about the ban. See Reg Items 4361 for the Chairman Robert Risson on the roof of a tram and 4353 for a photograph of an actual event.trams, tramways, safety, trolley poles, emergency, accidents, drivers, tram 720

This is the tiller from the SS Stormbird which traded for the Orbost Shipping Company (1906-1915) between Marlo and Lakes Entrance. Mr Peter Nixon (Min. for Transport and for the Navy, 1970s) and Mr Arthur McMullen had the wheel and mast which had been recovered from the wreck of the SS Stormbird in New Guinea. Mr Nixon donated this wheel to the Orbost Historical Society in 1969.The S S Stormbird was an auxiliary-ketch which was owned by the Orbost Shipping Company (Henry James was the principal shareholder and manager of this company). It, along with the Coringle and the Wongrabelle were the main steamers owned by this company. These boats also carried sails. The significance of this item lies with its association with the shipping trade which serviced this region prior to the railway coming in 1915/16.A ship's tiller wheel, made of wood and faced with brass. The wood is painted black. It has eight spokes and handles to grip in order to steer a boat/ship. Two of the grips have strong rope or wire rope wrapped around them.ss stormbird orbost-shipping-company ship-fitting

Rudder from the tug boat YORK SYME, built in 1961 by ADELAIDE SHIP CONSTRUCTION INTERNATIONAL - PORT ADELAIDE, AUSTRALIA. It is sailing under the flag of the Cook Islands. Its gross tonnage is 149 tons. The rudder is believed to come from a lifeboat previously attached to the Tug. The tug York Syme operated in various ports in New Zealand until around 2011. It is believed this is when it went to the Cook Islands. The registered owner is unknown at this time.The rudder is from the 1961 Tug York Syme. Its size suggests it was from the tug's lifeboat or ancillary boat. It is an example of marine technology from the mid-20th century. Although small, it works on similar principles to 19th-century rudders from the large sailing ships. A comparison of size and construction can be made between the various rudders from different eras in our collection.Rudder; small blonde wooden rudder from a small boat. It has two brass fittings. A thin spliced rope has been passed through a hole near the rudder's neck. A stamped inscription is located just below the rope.Stamped in black; "YORK SYME"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, marine equipment, steering, navigation, rudder, adelaide ship construction international, tug boat, york syme, cook islands, marine technology, ship fitting

Bag has travelled at least twice between the Netherlands and Australia, possibly from Rotterdam. Only one owner's name. Based on the skillfully knotted ropes, it was probably owned by a sailor.Constant travel between the Netherlands and Australia. The Waterman was a migrant ship form 1951 until 1963.Canvas bag, off-white, 8 eyelets around top threaded through with rope ends tied together with splice and monkey's fist knot, threaded through a looped pitch-treated rope. Loop tied into uneven figure eight.Personal markings: On side of bag, done by hand, F. KORTLEVEN Underneath, WATERMAN MELBOURNE Further down bag, faint F. KORTLEVEN AUSTRALIE M/S BLIT..28, ....R'DAM FRE sailor's duffle bag.

Sepia photograph showing launching of the S S Gippsland at Paynesville. Hull complete. No superstructure. Bunting flying between masts, some people onboard. Small row boat in water in front of steamer. Young boys on small jetty on left. Raymond Island in background. Paynesville VictoriaThe launching of the Gippsland, built by Peter Tierney at Paynesville 1908 for Percy Dahlsen. The author foreground, with rope. ships and shipping, waterways, celebration, launching

Press Release - News - two A4 pages, stapled, titled "Melbourne Trams for Hong Kong", about the awarding of a $200m contract for a new light rail system in Hong Kong, Quotes the Transport Minister Tom Roper. Notes the number of competitors to the contract and the involvement of the MTA. Dated 16/7/1985.trams, tramways, hong kong, light railway, mta, contracts

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid with Horn body and wood top.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid with a wooden bulb on top metal body tapering to a point. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid, Metal and Wood top with brass ferrule between the two.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern fid's are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Wooden Fid with 3 rings around base of knob at the top of fid. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Long light brown duffle bag, used for carrying clothing and small to medium personal items. A rope threads through a series of brass eyelets around the top of the bag and when closed substitutes as a carry shoulder strap. The bag is missing the rope.Very faded inside markings - "J.T.D. D^D 1950"passchendaele barracks trust, equipment, duffle bag, personal

Murray Comrie Collection.Monochrome photograph of soldiers in uniform posed in a military camp. Subjects are residents of Tarnagulla and other towns in surrounding district. All subjects served in First World War, dating the image to circa 1914-1918. Accompanied by a note that gives the following names: (Left to Right) Back Row: 1. ______________ 2. _______________ 3. Bert Whimpey 4. Bill Langan 5. Will Kilgour 6. Claude Whimpey 7. _______________ 8. ________________ Front Row: 1. Perce Ison 2. Arthur Whimpey 3. Syd Akers 4. Dave Roper tarnagulla, war, military, service, soldiers, veterans, ww1, first world war, kilgour, whimpey, langan, ison, akers, roper

Black diving boots with orange stripe at base and top with rope laces (Items 192.3 & 192.4)

Flag is very delicate, frayed edgesSection of a wooden mast with a blue and white flag attached with rope used to signify "diver below"

Gold Medallion in Asian style with orange rope attached. Sitting in maroon box made of felt.On medallion "PMA 0277/1" on verso: some Asian characters on box "PMA 0277/2" "WMA 39"

Painted, wooden plaque with image of Viking ship at sea with blue background with gold, rope background."Voyager"