A talking book player that allowed the user to change the tone and speed of cassettes played in it. Designed to handle both 4 track and 2 track cassettes, these players were the perfect solution to having both commercial (2 track) and recordings for the blind (4 track) materials without needing separate players. Tonal changes in particular were sometimes required by older listeners, as aging reduces the ability to distinguish high pitch sounds. Speed variability also allowed those who read faster to increase narration, and to slow down reading patterns for listeners with acquired brain injury or other conditions that affected cognitive processing of language.Blue plastic rectangular talking book player with buttons for navigational controls and 5 buttons.Model tbci serial no 8017. Machine number: 8157audio equipment, royal victorian institute for the blind

Metal slide rule type calculator, with scrolling graph. Has pencil/pen saddle and clip on left sideNavigational Computer Mk. IIIH Reg No. 68/250 Front. True Course, drift port Drift stbd Rear. I.C.A.N. Calibration, height correction, air speed correction

This book was owned by the late Dr Elizabeth Kerr and was donated to the Museum by the executor of her estate, Margaret Cameron. It was produced by English Vogue and contains knitting and crochet patterns for womens garments.VOGUE KNITTING / SPRING/SUMMER 1968 No. 4. / 3/- / LOOK / PRETTY / IN SPRING / KNITTING / 4 PATTERNS / EASY FOR / BEGINNERS / NEW / LINES IN / SEPARATES / SPECIAL / SPEED / KNITTING / FEATUREknitting crochet fashion, vogue - english, knitting, crochet, fashion

Set of two Colour slides, Kodak, white cardboard of trams of the construction of the Flinders St overpass over King St from the railway viaduct over Spencer St, looking east. Shows the temporary track on the south side of the bridge and the large car park under construction from the former cool stores on this site. Also shows the former track into Spencer St. Note the cross over at the base of the bridge. .1 - possibly 357 running a route 27 to Spencer St. Has the Great Southern Hotel on the left side. .2 - similar photo taken from the viaduct, further along - has the Bushels and Penfolds Wines signs in the background.Hand writing on rear in ink; .1 and .2 - "2-4-60 - Tracks - Flinders St Melbourne" Both slides have the speed and the f reading on the left hand side.trams, tramways, trackwork, flinders st, king st, track construction, bridges, w2 class, route 27, tram 357?

The HR model was released in April 1966 . Its design was similar to the HD model that it replaced, but with strip tail light cluster, and indicators put on the grille in front. The Motor was upgraded to the 161 ci and 186 ci and retaining the 2 speed Powerglide automaticReleased April 1966, an upgrade from the HD model that it replaced. Had protruding guards both front and rear and an upgraded engine of either 161, or 186 ci And different light assemblies Holden HR Premier sedan, blue duco with white roofHolden emblem grille , Premier rear roof pillar, 186 logo left hand boot lid, premier across boot lid. Registered number 63458-Hhr, holden, premier, sedan, car

An hourglass or sandglass is an instrument for measuring a defined time and can be used perpetually by simply turning it over immediately the top bulb empties. The clear blown glass is shaped into two equal sized bulbs with a narrow passage in the centre and contains uniform sized sand or glass particles in the lower bulb. The width of the neck regulates the constant flow of the particles. The glass is held in a stand with top and bottom of equal shape and size. Hourglasses can measure an infinite variety of time by gauging the size of the particles, the shape and size of the bulbs and the size of the passage between the bulbs, thus measuring hours or minutes or even seconds. Generally an hourglass sits between discs of wood at the ends, which are joined by long wooden spindles between the ends and tightened by screw caps. The length of time can be adjusted by adding or removing sand particles. The use of the marine sandglass (or hourglass) has been recorded in the 14th century in European shipping. A one minute sandglass was used in conjunction with the ship’s log for ‘dead reckoning’, (see below) that is, for measuring the ship’s speed through the water. They were also used to regulate ringing the ship’s timetable; for example a 4 hour sandglass was used for the length of the sailors’ watch, and a half hour timer for taking of readings for the ship’s log; the ship’s bell would be rung every half hour. It was usually the role of the cabin boy to watch and turn the sandglasses over at the exact time of them emptying their upper chambers and to ring the ship’s bell. Hourglasses have been used historically for many hundreds of years. Some have been used for timing church sermons, in cooking, in industry and at sea. Even today they are used for measuring the cooking time of eggs and timing a player’s turn in games such as Boggle and Pictionary. The sandglasses at sea were gradually replaced in the late 1700’s to early 1800’s by the more accurate chronometers (marine clocks) when they became reliable instruments. DEAD RECKONING (or Deduced Reckoning) Dead reckoning is the term used to describe the method of calculating the ship’s position from its speed and direction, used in early maritime travel, mostly in European waters. Both the (1) speed and the (2) direction of travel were recorded on a Traverse Board at half-hourly intervals during a helmsman’s watch of 4 hours. The navigator would record the readings in his ship’s log, plot them on his navigational chart and give his updated course directions to the next helmsman on watch, along with the cleared Traverse Board. This was a very approximate, but none-the-less helpful, method of navigation. The wooden Traverse Board was a simple pegboard with a diagram of a compass with eight peg holes along the radius to each of the compass points, plus a grid with ascending half hours in the left column and increasing ship’s speed in knots in a row across the column headings, with a peg hole in each of the intersecting cells. A number of wooden pegs were attached to strings on the board. By placing one peg consecutively in the direction’s radius hole, starting from the centre, and the speed holes when the half hourly reading was taken, a picture of speed and direction for the whole 4 hour watch was created. (1) To measure the ship’s speed a one minute hourglass timer was usually used to measure the ship’s speed through the water and help to calculate its longitude. A rope, with knots at regular standard intervals and a weight such as a log at the end, would be thrown overboard at the stern of the ship. At the same time the hourglass would be turned over and a seaman would start counting the number of knots on the rope that passed freely through his hands as the ship travelled. When the timer ran out the counting would be stopped. A timer of one minute (one-sixtieth of an hour), knots spaced one-sixtieth of a nautical mile apart, and simple arithmetic easily gave the speed of the ship in nautical miles per hour ("knots"). This would be recorded every half hour. The speed could however be inaccurate to the travel being affected by ocean currents and wind. (2) To calculate the ship’s direction a compass sighting would be recorded each half hour.Marine hourglasses or sandglasses were used from around the 14th to 19th century during the time of sailing ships. This hourglass is representative of that era, which is during the time of the colonisation of Australia. Hourglass or sandglass; an instrument used to measure time. Two equal sized clear glass bulbs joined with a narrow passage between them, containing equal sized particles of sand grains in lower bulb. Glass sits in a brass collar at each end, in a frame comprising 3 decorative brass columns or posts, each attached top and bottom, using round screw-on feet, to round brass discs. Disc have Roman numerals for the numbers 1 - 12 pressed into their inner surfaces and hieroglyphics on the outer surfaces. Roman numerals on inner surface of discs " I II III IV V VI VII VIII IX X XI XII " Hieroglyphics impressed on outer surface of discsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, horology, hourglass, hour glass, sandglass, sand glass, timing instrument, dead reckoning, deduced reckoning, finding latitude at sea, sandglass with hieroglyphics and roman numerals, hourglass with hieroglyphics and roman numerals, brass hourglass

On 2nd February 1918, Brighton experienced the most extreme cyclone to hit a major Australian city, as recorded by the Commonwealth Bureau of Meteorology. With wind speeds estimated at 320 km/h and resulting in the deaths of two people, the event caused tremendous destruction in Brighton.cyclone, brighton, methodist church, hawthorn road, grant's hay & corn store, wells street, wellington street, billilla, weatherly, halifax street, tornado, colonel kendall

Original instrument issued to Air Crew, Pilot, Navigator Geoff Bryan CallahanInstrument mounted in wooden carry box with felt lining. Description printed on one end and owner written on lidBox Ref No. GB/120 408104, CALLAHAN Sgt Instrument Various scales on the face. Serial No. 52510, W.G.PYE & Co. Ltd Course & Speed Calculator Ref No. GB/125 MK.IIA

The model has yellow cream deck on grey body and red bottom. It stands on greay base with texts "U.S. BATTLESHIP BB-62 NEW JERSEY". The ship has 3 turrets, 2 at the front, 1 at the back and a helicopter standing at the end.U.S. BATTLESHIP BB-62 NEW JERSEY LENGTH OVERALL 270.5m BEAM 32.95m DRAUGHT 116m DISPLACEMENT STANDARD 45000H DISPLACEMENT MAXIMUM 59000H POWER 212000HP SPEED 33KTmodel - combat ship, uss new jersey, uss forrest sherman

Electric fans were used for cooling rooms prior to air conditioning.This fan was used by S.E.C.V. office workers working on the Kiewa Hydro Electric Scheme. Small electric swivel fan. This heavy black metal fan has 4 curved 'wings' covered by protecting wire consisting of 2 wire rings joined by 6 curved pieces of wire covering the sides and front. Attached to the motor that can swivel and to the base is a black rubber covered electric cord. The base forms a stand with a control knob for speed and swivel options. On a plaque: Menominee / Fan Motor / 55182591 Serial No. 200 volts / ACC current 6 cycles / Menominee Electric Mfg. Co. / Menominee ..? Control knob: 0,1,2,3 along slotelectric fan; state electricity commission of victoria; kiewa hydro electric scheme; office furniture

Black and white photo - Panel van with High Speed Gas written on side Gas and fuel logo and the word service unit on door. 2 men standing at the front of the car looking at some papers. The van is parked in front a suburban house. At the right A flame is shooting up from a gas pipe. On the back the numbers 7-8-1152. Date and location unknown.organisation, industry, gas and fuel

A Wilson, Jack Kramer Speed Flo tennis racquet. Base of head features Wilson logo. Throat features decal head and neck illustration of Kramer. Shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Paint, Ribbon, Adhesive tapetennis

Instruction or Regulation - 4 foolscap pages, single sheet folded titled "Motor Car Act 1915 - Regulations", extracted from the Victorian Government Gazette of 27th March 1918. Includes details on size of motor vehicle, instructions, passing a tramcar, speed, stopping, number plates, lights, registration, licensing of drivers, transfer of sale and purchase. Two copies held.trams, tramways, victorian government, regulations, motor vehicles, tramways, driver training

Dial and four digit indicator to calculate revolutions of a moving part (such as an engine or shaft). In black box with red lining. Instructions sheets are includedProbator "Directions for Use/ Speed Indicator Record/ Applicable up to 6000 rpm/ for spindles rotating clockwise and anticlockwise/ tests up to 1000 rpm may be made by the steel tip the pointed/ rubber tip should be used for higher speeds/ to reset the counter one turn of the knurled knob will be sufficient/ Do not Reset whilst the counter is in motion/ The instrument is to be lubricated from time to time with a good/ neatsfoot oil" These instructions are repeated in other languages

Ship's log register or recorder, used to determine the distance a ship travels and the speed it is traveling. It would be fixed to the rail (taffrail) at stern of the ship and attached to the log rotor that would be towed behind the ship. The Cherub design was one of the first to have the register placed on the ship instead of with the rotor in the water.Ship's taffrail log register, recovered from the tug "Melbourne". Dial and bracket, brass. "Patented and made in England". Parts of words 'Walker's Cherub Log, Mark II" are visible. 2 dials marked in 100's and 10's "Patented and made in England". Parts of words "W" (Walker) "CH" (CHERUB) "Ma" (Mark III) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship's log register, log register, log dial, t walker, thomas walker, cherub log

An ergonomic keyboard designed for people who need to type with one hand. Typing speeds of 85 WPM are possible with this keyboard. The layout of the keyboard is designed for one handed users to type quickly and efficiently.The shape allows the natural movement of the hand. The company was formed in 1977 and this model was created in 1981. Single handed keyboard with grey and yellow buttons and power cord. Maltronkeyboard, maltron, disability, one handed keyboard, impaired aid, electronic

Rectangular calculating instrument with (1) 'hinged lid' fitted with circular rotating dial for setting/reading altitude, speed, distance and temperature, (2) notebook inside lid, (3) circular dial with perspex cover, beneath which is (4) graph chart, moveable up-and-down by means of rotating knob on side of device. Curved brackets and elasticized straps on back for strapping onto pilot's leg.R.A.A.F. Ident. No. G6B/145 Serial No. WG/2233 COMPUTER NAVIGATIONAL Mk. III D. (Other inscriptions including instructions for use and scales for various measurements) "AB" hand written on strap (owner's initials?)

The Thomas James Connelly collection. T. J. Connelly - Brassfounder, Coppersmith, Plumber and Gasfitter. Located in High St. Bendigo. Items of correspondence. Letter on blue paper headed: Echuca Lodge of Advancement Echuca 11th Feb. 1871. The letter is an invitation to the Installation Banquet, Masonic Hall, 2nd March. Signed M. Speed and Jos. Stubbs, stewards. On the opposite side is a written list.trades, plumbing, thomas james connelly, connelly, thomas james. plumbers

Haminex C Flashgun (code 14-009) in its original box. The flash Gun uses Flash Cubes (no sample) and can be fitted to camera via together with a short cord and plug to connect to the camera shutter. It has a exposure table for distance and film speed, and a lever to turn the cube around to one of its four surfaces. The unit uses a 15 Volt No.404 battery for the flash.Hanimex C 7 Exposure Tablephotography, cameras

Black and white photograph of MMTB B class No. 23 taken from a front verandah on its first trip at the corner of High St and Woodlands Ave 11-1-25 on the return trip from Burke Road to Kew Depot. A young lady is standing by the front fence. The tram is well loaded with passengers and possibly the conductor standing in the rear section of the tram, revelling at speed.On rear in ink "MMTB No. 23 taken from a front verandah on its first trip at the corner of High St and Woodlands Ave 11-1-25 on the return trip from Burke Road to Kew Depot."trams, tramways, high st kew, b class, opening, tram 23, mmtb

A recording of choral arrangements, performed by Diamond Valley Choral Society at Bundoora; no date is given. Songs include: Advance Australia Fair, Elizabethan serenade, Love is meant to make us glad, The kindly voice of Mother Nature (Mozart), Speed your journey (Verdi), I believe, Tumbling tumbleweeds.1 audio cassette in clear plastic caseHandwritten on cassette: "Choral arrangements, Bundoora"diamond valley choral society, bundoora

Staff exchanger hoop - Leather Bakelite and wooden prop staff. The hoop held the 'Staff’ giving authority for a locomotive or rail vehicle permission to travel over a specified section of track. The display shows the hand held type used from person to person. Hand held staffs were exchanged at low speeds or stationary. Automatic staff exchangers were also in use when a vehicle was not required to travel at low speed to exchange the staffs and were used by express trains. To exchange the 'Staff’ from the platform or signal box to the locomotive driver, the hoop was held up in the air by the person, and collected by the Drivers arm. The reverse occurred when the staff was being given by the Driver. Both exchanges may occur where one section of line ends and another commences.Historic - Railways - Staff exchanger hoop - used for person to person exchanging.Staff exchanger hoop made of Leather Bakelite and wooden prop staffpuffing billy, staff exchanger hoop

The Stinson L - 5 Sentinel was a World War 11- era liaison aircraft used by the United States Army Air Forces, U.S Army Ground Forces, U>S Marine Corps and the British Royal Air Force. It was produced by the Stinson Division of the Vultee Aircraft Company (Consolidated - Vultee from mid- 1943). Capable of operating from short unimproved airstrips the L - 5 Sentinel delivered personnel, intelligence, and supplies to the front line. On return flights it carried wounded soldiers who were evacuated to rear area field hospitals for treatment. The L - 5 carried a pilot and observer. It had a length of 24.1 feet, wingspan of 34 feet, It had a maximum speed of 130 mph, a cruise speed of 100 mph with a range of 375 miles.The L - 5 was a significant asset to the allied war effort.Wooden propeller from Lycoming engine, with photograph of aircraft. Stinson L 5 Sentinal reconnaissance plane used in Korea and Vietnam. Propeller displayed from a similar plane.

This item, which dates to 1988, is contained in the original supply packet and survives in good condition. It was commonly used by lightkeepers for both wet and dry bulb thermometers, with the muslin going into the bottom of the dry bulb where it was held in place by the wick and ‘end of the wick was then placed in a jar of deep water to keep the bulb cool’. The difference in temperatures between the dry and wet bulb thermometers could then be worked out to establish the dew point in the air.They were common in lightstations, but this intact item remains in the original packaging and is a fine representative example of its kind. It was acquired from the Bureau of Meteorology. Recording and communicating weather readings was an important facet of lightstation work and a number of different but related items of meteorological equipment survive at the six lightstations managed by parks Victoria. The Cape Nelson collection includes a pair of Australian-made thermometers in their original box, both in Fahrenheit, with one recording the minimum, the other the maximum temperature and a barometer table with instructions for correcting readings. Cape Otway has a Beaufort Scale, a table of wind forces which lists 12 types on a scale of 1 to 12, and provides associated speed in knots and travel time per minute or hour. Gabo Island has an anemometer, wind speed indicator and a wind speed recorder.Muslin and wick for a wet bulb thermomenter in unopened white paper packaging with directions for use printed on the package on the front.On front of package,"MUSLIN AND WICK FOR WET BULB THERMOMETER......."

This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"

The line throwing apparatus has been in use for several centuries, in a wide variety of forms. It initially started off as manually launched lines that had shorter ranges and were not very accurate. They faced problems on wind-powered boats and ships since they were dependent on wind speed, wind direction, and the operator accuracy.Modern-day line throwing apparatus are powered using rockets, pneumatic systems, or slingshot mechanisms. They fall under two main categories of propulsion- pyrotechnic, and pneumatic. Pyrotechnic systems make use of an ignition that is used to launch the line, whereas pneumatic systems make use of built-up pressure. Pyrotechnic systems are volatile and can be extremely dangerous due to accidental ignition. In response to growing concerns about the safety of pyrotechnic systems, pneumatic based launchers were invented and widely implemented in the late 20th century.Yellow line throwing device consisting of a canaster containing rolled rope and a firing mechanismPains-Wessex Speedline International. Pt No 5151-01/02speed line, line throwing, marine rescue, pyrotechnics

Document gives the data about scheduled speeds in miles per hour for General Electric GE-264 motors for stops per miles, gear ratios, and wheel sizes for form A and B motors. Has a table for truck or bogie data and weights. Enabled street car or tramway operators to select their equipment and motors. Demonstrates a GE data sheet to assist tramway engineers in their equipment selection.Data sheet typed on foolscap paper.tramways, tramcars, ge, general electric, motors, specifications

Provides information about a proposal "speed camera" style camera for use in Fairways to detect motorists who should have not have been using the lane. Proposed by the Minister for Transport Jim Kennan, opposed by the Opposition Transport spokesman Alan Brown. Gave some proposed locations. Article written by Rosanne Michie. Yields information about a proposal to monitor compliance of Fairways,Newspaper clipping - "Tramline 'eye' plan slammed" - The Sun 5-4-1989tramways, trams, melbourne, public transport, fairways

This piece of equipment was used to predict the flight path of an aircraft in order for anti-aircraft artillery to fire accurately at an approaching enemy airborne target. A crew of six operated the machine with information ready to be relayed to a gun within 50 seconds. The predictor was manufactured at the Commonwealth Government Ordnance Factory, Maribyrnong.The item is made primarily from metal, is square shaped and bolted to a wooden base. Numerous hand operated wheel dials attached to gauges which input information related to wind speed, bearings and elevation are visible. Each of the four sides has a specific task with three sides being labelled - Elevation Unit, Wind Calculator, Bearing Unit. The item is housed in a glass and wood display case. Attached to the front of the display case: 'VICKERS A.A. PREDICTOR No1 MK III MANUFACTURED BY ORDNANCE FACTORY MARIBYRNONG'pedictor, military equipment, ordnance, anti-aircraft guns