A forged steel fine tooth crosscut saw with no handles. There are four rivet bolts and two round handle holders at each end of the saw. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Murray Comrie Collection. Information written by Murray Comrie: Dr. Philip H. Donovan took up practice as resident surgeon at Tarnagulla in April 1894 following the death of Dr. Dickson. He took up residence at Joyce's and then moved to opposite the (current) Post Office in Commercial Rd. He later took up residence at 79 Commercial Road, next to Runtings hairdresser and sporting good store.. With Dr. Deravin he successfully operated for appendicitis on S. James. He died suddenly on Tuesday 8th September 1903 from an aneurism. He was unmarried and aged 38 years. He was so highly regarded that the people of Tarnagulla erected a monument over his grave at Tarnagulla Cemetery. On Sunday 11/9/1904 members of St. George Lodge of Freemasons, Dunolly made a pilgrimage to the grave to mark the anniversary of his death. Monochrome photograph depicting Dr. Philip H. Donovan seated with a small dog on his lap. This is a reasonable copy of an older original which appears to have been physically cut/modified. Copy probably made by Murray Comrie in the 1970s. tarnagulla, doctors, doctor, surgeon, medicine, health, donovan, dog, animals

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the jewellery polishing cloth has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Sarah Coventry Pty. Ltd. yellow jewellery polishing cloth in a light-coloured paper envelope with pink floral designs on the front and back, as well as text on the back. Oval cut out on the front surface to show the yellow polishing cloth."Sarah Coventry / Sarah Conventry, Inc. Newark, New York 14593 Copyright 1975 / A Care Cloth to keep your Sarah Coventry jewelry looking lovely. / A quick polishing will remove dust and fingerprints. / Enjoy Sarah Coventry at its finest."sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, jewellery polishing cloths

Roy Keith House (1895-1979) married Veronica Ruwoldt in 1917. Their children included sons, Roy Lewis (1920 - 1984) who married Dorothy Woolley in 1941 and Harold Keith (Keith) (1921 - ) who married Amy Jennings in 1943.Bendigo Advertiser ''The way we were'' from Saturday, December 6, 2003. Building an empire: Bendigo builders Keith House, Roy House and Roy House Senior cut a striking pose in this photograph, date unknown. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Arthur Edmund Tranter POW. Refer Cat No 7944 for his service history.Soft cardboard cover, black print on front, white background, front sepia half portrait photo of a soldier in uniform. 60 pages, cut, plain, white. Illustrated with black / white, sepia & colour photos, maps, diagrams, illustrations. Adhesive label on front end paper: “Handwritten signature” Adhesive label front end paper handwritten in blue ink: “Brenda M Tranter”book, 2/29th

This photograph depicts five of the Mission's Committee members: top (left to right) are standing Harold Kingston Vickery and Arthur T. Pitt, both Lay Readers. Seated (left to right) are Reverend William Forster Haire, Assistant Chaplain, Reverend Alfred Gurney Goldsmith, Chaplain, and Mr Charles A. Holmes, Honorary Lay Reader. The photograph was probably taken inside the Central Institute, Siddeley Street, between 1909 and 1911.An original frame with an image of a group of Mission office-bearers including Rev Gurney-Goldsmith who was Senior Chaplain over the significant early 20th Century period of Mission establishment in the Central Docklands area. Sepia photograph in a wood frame with group of five men in suits; ink inscription of five names on paper label adhered lwr front of frameFront on paper label: Revd W.F Haire, Revd A. G.Goldsmith; Mr C A Holmes (paper cut) / Mr H. K Vickery, Revd A.T. Pitt; Verso at lwr right crnr in pencil: PH- R14 reverend a. gurney-goldsmith, mr h.k. vickery, reverend a.t. pitt, reverend w. foster haire, charles a. holmes, charles arthur holmes (-1947), william foster haire, harold kingston vickery, chaplains, lay readers, staff, chaplains group

The people in the photo are: Mr & Mrs Gus Knight and Ray Knight (on the right). The names of the other three people are not known. The site of the house is where a later monument would stand (see inscription).Photo shows six people; three seated on a large log, two standing and one leaning on a tree stump; in front of a house."Mr & Mrs Gus Knight, Ray on right. -Where Monument will go. Ray just cut down tree - so it would not fall on house." written in biro on rear of photo. "Wannon" written in pencil on rear of photo.people, knight, buildings, tea rooms

A dowel is a cylindrical rod, usually made of wood. In its original manufactured form, a dowel is called a dowel rod. Dowel rods are often cut into short lengths called dowel pins.These are commonly used as structural reinforcements in cabinet making and in joining large timbers together. To make a dowel, a piece of wood is split or whittled to a size slightly bigger than desired and to place the stock into a vice then rotate past a fixed knife, or alternatively, to rotate the knife around the stock such as the subject tool was used. Machines based on this principle emerged in the 19th century. Frequently, these are small bench-mounted tools, prior to this time dowels had to be cut by hand. The tool is an example of early to late 19th century hand tool used to make timber dowels. It is not associated with an historical event, person or place, makers provenance is unable to be determined at this time. Many small American and British tool manufactures were taken over by Stanley tools after 1843 when the company was established and this item could have been made by one of these. However the subject item appears to be rare and would be regarded as a collector's item.An adjustable woodworking tool know as a Moot, used for making Trunnels or Treenails (Dowels) for fastening joints in timber. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, moot, trunnels, treenails, circular, dowels, woodworking tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

Three cut-throat razors, boed units in deteriorated condition: 22b - box marked Pittock,blade marked Bengall, manufacturers name on reverse side T. R. Cadman & Sons, Sheffield England 22c - red box has remains of Sheffield England marked on the smaller end of box. Blade is damaged and rusted. Blade black handle is notated with Bengall, while blade itself is etched Made Specially for A. Edments Pty. Ltd.; reverse notes manufacturer as T. R. Cadman & Sons, Sheffield England 22d - box has no discernible markings, but has minor taped repair on larger section. Black handle is unmarked, blade is marked Bengall, the reverse notes manufacturer as T. R. Cadman & Sons, Sheffield England. Items stored in Pittock coach builders box, reference 13000.

Part of a collection of photographs cut from old photo album with multiple photos per page. Margaret Webster donated the photographs. Margaret's parents were Sir Charles & Lady McGrath who lived near the RSL on Ventnor Road, Phillip Island.286-01 - Sepia photograph of the beach at Cape Woolamai, Phillip Island. 286-02 - Sepia photograph of The Sentinel, Cape Woolamai, Phillip Island. 286-03 - Sepia photograph of The Terrace, Cape Woolamai, Phillip Island. 286-04 - Sepia photograph of Pyramid Rock, Phillip Island. 286-05 - Sepia photograph of the cliffs at Cape Woolamai, Phillip Island.286-01 - "Beach Cape Woolamai Phillip Island" 286-02 - "The Sentinel Cape Woolamai Phillip Island" 286-03 - "The Terrace Cape Woolamai" 286-04 - "Pyramid Rock P.I." 286-05 - "Cliffs - Cape Woolamai"coastline cape woolamai, pyramid rock, the sentinel cape woolamai, the terrace cape woolamai, margaret webster

Dressmakers used patterns to make clothes. Companies included 'Simplicity, Butterick and Vogue etc. The packet would contain transparent paper shapes with printed lines and instructions. These were pinned onto the material, cut, then sewn together as per the lines and the included instructions.In the 1950s and 1960s women sewed the clothes for the family. In the Kiewa Valley dress shops were not available and a journey to the bigger cities was less frequent than it is today.Coloured pictures showing the finished garment. Patterns were in sizes. eg. size 10 1. Fashion - lady's dress 2. x3 Simplicity - lady's clothes 3. x3 Butterick lady's clothesdressmaker, simplicity butterick, ladies fashion

Part of the "Wagga collection". Made from squares of patchwork suiting, machine stitched with red diamond and rectangle motifs at strategic positions. The diamonds look like they have been inserted in the fabric pieces where a dart has been cut and opened out.Quilt made of squares of patchwork suiting and fabric offcuts, machine stitched with red diamond and rectangle motifs at strategic positions.quilting history, patchwork history, running stitch group, running stitch collection, quilting - history, patchwork - history

Came from the Station Master's House, Mitcham Railway Station. Shirley Jones mentioned them to Harold Bakes, Shirley helped put them on the board and fill up the holes. Mr Eric Sunderland helped cut them out, quite a jobSmall ceiling rose plaster mould from the Station Master's House, Mitcham Railway Stationbuildings, fittings

The photograph was taken from the rear of the Emu Bottom Homestead and its outbuildings. George Evans, one of the earliest European settlers in Sunbury, built Emu Bottom homestead in the 1830s. The original building was made from Silurian sandstone cut from the surrounding hills. A black and white landscape photograph with a cream border of farm buildings.homesteads, emu bottom, george evans, settlers, jackson creek

1. A female assists a boy cut his hot dog on a plate. 2. An elderly female and older man engage with each other, in black and white. 3. A young child looks at a brightly coloured book. 4. A Christmas gift exchanges hands.4 digital images originally printed on to oversize blocksvision australia, carols by candlelight, kodak

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal handle with spiral wrapped grip tape. String whipping around shoulders and string whipping and plastic reinforcement around base of throat. Leather end wrap and butt cap with faded racquet care instructions. On obverse and reverse, manufacturer's name is printed as decal across base of head. Obverse and reverse both feature model name and eagle symbol across shaft. On one side of shaft:'WRIGHT & DITSON/MAKERS/MADE IN U.S.A.' and on other side of shaft:'PAT. NO.1664466'. Shield design printed on plastic reinforcement on both obverse and reverse. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Leather, String, Plastictennis

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal handle with spiral wrapped grip tape. String whipping around shoulders and string whipping and plastic reinforcement around base of throat. Leather end wrap and butt cap with maker name and racquet care instructions. On obverse and reverse, manufacturer's name is printed as decal across base of head. Obverse and reverse both feature model name and eagle symbol across shaft. On one side of shaft:'WRIGHT & DITSON/MAKERS/MADE IN U.S.A.' and on other side of shaft:'PAT. NO.1664466'. Shield design printed on plastic reinforcement on both obverse and reverse. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, String, Plastic, Nylontennis

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Wooden section repainted red, with a synthetic handle grip wrapped around the lower handle. Materials: Wood, Metal, Glue, Lacquer, String, Paint, Synthetic materialtennis

A Hobbies' steel tennis racquet, with a vinyl handle grip winding up the tapering shaft to the open throat. Head of racquet is tension tightened, as can be seen by the screw, nut, and spring projecting from the base of the head. Racquet string is piano wire. Materials: Metal, Glue, Paint, String, Glue, Vinyl, Leather, Inktennis

A Dura-Fiber prototype tennis racquet, featuring open throat, handle grip wrapped in brown leather and plastic butt cap. Vinyl strings, blue spraypainted logo in centre of net. No other labelling. White shaft/shoulders. Materials: Wood, Metal, Lacquer, Glue, Paint, Leather, Adhesive tape, Vinyl, Plastictennis

A Head Professional squash racquet (.1), with racquet head cover (.2). Racquet primarily comprises of a frame made from a singular piece of tubular metal, secured by a plastic bridge across the throat, and the hardened plastic handle below. Materials: Metal, Plastic, Leather, Ink, Nylon, Vinyl, Synthetic material, Metal, Inktennis

A Wilson Future Star tennis racquet. Base of head features Wilson logo. Throat features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Wilson Chris Evert, Miss Chris tennis racquet. Base of head features Wilson logo. Throat features model name. Base of shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbontennis