This is a ship model of the famous galleon the "Golden Hind". About the “Golden Hind” The English galleon “Golden Hind”, a mid-16th century Elizabethan warship, was launched in 1577. It was formerly known as the “Pelican”. The Golden Hind was the flagship of Captain Sir Frances Drake, in which he became the first Englishman to circumnavigate the world 1577-1580. Tonnage 100-150 tons Displacement 300 tons [fully loaded] Speed 8-15 knots Armament 22 guns Crew 80 sailors, 10 officers Built Aldeburgh, Suffolk, then moved to Plymouth, Devon in 1576 Type of ship Galleon; multi-decked ship (5 decks), square rigged, 3 masted sailing ship Estimated size Length - 70 feet (21.3m); Breadth – 19 feet (5.8m); Depth – 9 feet (2.7m) The Pelican set sail in 1577 on an expedition sponsored partly by Queen Elizabeth and Sir Christopher Hatten (whose family crest was a golden hind). His companion ships were the Swan, Marigold, Benedict and the Elizabeth. During this voyage, in 1578, Drake renamed the Pelican as the Golden Hind in honour of is patron. Sir Francis Drake [1544 – 1596] brought the Golden Hind home from his circumnavigation of the globe with looted gold, percelain, jewels and cash worth 35,000,000 million pounds in today’s money. It was the largest treasure every captured at that date. Only two ships returned – the “Golden Hind” and the “Elizabeth”. The ship model of the Golden Hind captained by Sir Frances Drake represents the first English circumnavigation of the globe.Ship model of the16th century galleon "The Golden Hind", Sir Francis Drake’s flagship (not in a glass case.) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model, model ship, galleon golden hind 1577, galleon golden hinde 1577, galleon pelican 1577, 16th century galleon, 16th century warship, sir frances drake, captain frances drake, first englishman to circumnavigate the globe

A toasting fork is a three pronged fork designed to be used to toast things over an open fireplace. Classically, a toasting fork could be stuck into a piece of bread and used to hold the bread in the fire, with a periodic rotation for even browning. For advanced players, it's possible to use a toasting fork to make toasted cheese sandwiches and other hot sandwiches. A typical toasting fork is made of wire, and many modern ones are telescopic, allowing people to fold the fork up or slide the handle in when not in use. This makes toasting forks easier to store and transport, while allowing people to keep their hands well clear of the fire when the fork is in use. The three slender prongs can be of varying length, depending on the design; prongs which are too long will mangle the bread, while short prongs will allow the bread to slide off, so most designers try to strike a happy medium. Before the arrival of gas and electric cook stoves, households relied on heavy duty wood and coal fired cookers, or simply open fireplaces. Such stoves required a great deal of energy and maintenance to run, so when someone wanted a quick snack, toasting something over an open fire could be much more appealing than wrestling with the cooker. Some people also undoubtedly found the experience of toasting something over an open fire to be enjoyable. https://www.delightedcooking.com/what-is-a-toasting-fork.htmIn the old days, there were no electric toasters, so the toasting fork used near an open flame proved extremely effective.Fork with three prongs with hook design on the two outside prongs. Neck features decorative twisted design and there is more decorative work in the metal near the bone handle.None. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This is a ship model of the Golden Hind. About the “Golden Hind” The English galleon “Golden Hind”, a mid-16th century Elizabethan warship, was launched in 1577. It was formerly known as the “Pelican”. The Golden Hind was the flagship of Captain Sir Frances Drake, in which he became the first Englishman to circumnavigate the world 1577-1580. Tonnage 100-150 tons Displacement 300 tons [fully loaded] Speed 8-15 knots Armament 22 guns Crew 80 sailors, 10 officers Built Aldeburgh, Suffolk, then moved to Plymouth, Devon in 1576 Type of ship Galleon; multi-decked ship (5 decks), square rigged, 3 masted sailing ship Estimated size Length - 70 feet (21.3m); Breadth – 19 feet (5.8m); Depth – 9 feet (2.7m) The Pelican set sail in 1577 on an expedition sponsored partly by Queen Elizabeth and Sir Christopher Hatten (whose family crest was a golden hind). His companion ships were the Swan, Marigold, Benedict and the Elizabeth. During this voyage, in 1578, Drake renamed the Pelican as the Golden Hind in honour of is patron. Sir Francis Drake [1544 – 1596] brought the Golden Hind home from his circumnavigation of the globe with looted gold, percelain, jewels and cash worth 35,000,000 million pounds in today’s money. It was the largest treasure every captured at that date. Only two ships returned – the “Golden Hind” and the “Elizabeth”. This Ship model of the galleon Golden Hind, the flagship of Captain Sir Frances Drake, represents the first circumnavigation of the globe by an Englishman.Ship model, the galleon Golden Hind on timber stand. Square rigged with 2 masts each with a flag and crow's nest. 22 guns on decks. Brown hull with green stripes and decorative coloured trimmings. Nameplate "Sir Francis Drake - his ship / The Golden Hind - 1577-1580". Emblem with animal golden hind, Tudor Rose and lamp above. Nameplate "Sir Francis Drake - his ship / The Golden Hind - 1577 - 1580"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model, model ship, galleon golden hind 1577, galleon golden hinde 1577, galleon pelican 1577, 16th century galleon, 16th century warship, sir frances drake, captain frances drake, first englishman to circumnavigate the globe

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass replacement lens for a navigation side lamp of a ship. W.T.G (S) and 10x7 S.STR.ENGL.125warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

A hat pin is a decorative pin for holding a hat to the head, usually by the hair that was styled in a Chignon or French Roll style and usually worn in a pair. They are typically around 20 cm in length, with the pinhead being the most decorated part. The hatpin was invented to hold veils in place, and was handmade. Birmingham, England was the centre of production when demand eventually outgrew the number that could be supplied by hand-making and they also began to be imported from France. In 1832, an American machine was invented to manufacture the pins, and they became much more affordable. During the 1880s, bonnets gave way to hats, some of which were very large and the popularity of hatpins soared. In the Victorian era, when appearance was everything, it just wouldn't do for a fashionable lady's hat to blow off in the wind. They remained a standard women's' accessory through the 1910s and were produced in a vast range of materials and types. Hat pin holder boxes were also produced. One of the most well-known makers of hatpins is silversmith Charles Horner, of Halifax, whose turn of the century jewellery company became a leader in the market by creating a series of mass-produced pins that were still of exceptional quality. As a result, thousands of Horner's pins are still on the market and on display in museums worldwide. Women of the 1920’s used hat pins as decoration on their Cloche hats that fitted snugly to their heads. The women of the pioneer families liked to dress up in their best hand made dresses and fashionable hats for Church gatherings and special occasions as a relief from the daily chores of hand washing, ironing with flat irons and cooking over open fires.2 lady's long steel hat pins with sequents in a flower design on mauve material bonnets, hats, veils, scarves, moorabbin, bentleigh, brighton, cheltenham, early settlers, pioneers, clasps, hairdressing, combs, steel pins, jewellery

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass replacement lens for a navigation lamp of a ship. None warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass replacement lens for a navigation mast headlamp of a ship. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel round glass masthead replacement lens for a navigation lamp of a ship. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass lens for a ships masthead navigation lamp. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

A Fresnel lens is a type of composite compact lens developed by the French physicist Augustin-Jean Fresnel (1788–1827) for use primarily in lighthouses.  Made from high-quality glass Fresnel lenses were used originally in lighthouses and later for many other applications They were later being used for automobile headlamps, brake, parking, and turn signal lenses, and many other applications. Fresnel lenses used in lighthouses were considered state of the art from the late 19th through to the middle of the 20th century. The subject item is a Fresnel replacement lens used in a ships navigation light. For lighthouses, these lenses have now been replaced with much less expensive and more durable aerobeacons, which themselves often contain plastic Fresnel lenses. The lens design allows the construction of lenses of large aperture and short focal length without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. The simpler dioptric (purely refractive) form of the lens was first proposed by Count Buffon and independently reinvented by Fresnel. The catadioptric form of the lens, entirely invented by Fresnel, has outer elements that use total internal reflection as well as refraction; it can capture more oblique light from a light source making the light visible from greater distances.The subject item at this time cannot be associated with a historical event, person or place, provenance is unknown, the item is a replacement for a ships navigation light and it is believed to have been produced before 1950.Fresnel glass replacement lens for a navigation side lamp of a ship. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fresnel lens, maritime light, ships navigation light, augustin-jean fresnel, lighthouse lenses, lighthouse, navigation, warning light

8 NBH - Excursion Car (28) In Active Service - Belgrave Station Yard 8NBH - Excursion carriage. This car has been restored to original condition with white canvas weather blinds,Full carriage length side steps, timber tongue and groove boards,coupling centering springs and some pinch gas lighting equipment. NBH SECOND-CLASS EXCURSION CAR. The H was recognising their use for "Holiday" traffic. 15 of these cars were built in 1919 and numbered 1-15. Two more were built in 1981, and numbered 16 & 17. Two extended versions for wheelchair passengers were built in 1981 & 1983. These were numbered 51 & 52 - a separate number series due to the different type of vehicle. Six, numbered 18-23, were built in 1997-98. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 18NBH entered traffic 19/4/1997; 19NBH on 5/12/1997; 20NBH on 19/12/1997, the others added in 1998. VR Service History : *NBH 8.VA - 8/12/1919 NWS Built new - / 1/1929 - Modified AC Malco BO circa 1955 - Condemned Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Excursion Car 8NBH - Passenger Carriage - Excursion Car made of steel and timber8NBHpuffing billy, victorian railways, 8 nbh, passenger carriage, excursion car, narrow gauge

The Gallipoli Star and its ribbon were designed in 1917 by R K Peacock, but official approval from King George V for the proposed campaign medal was withdrawn after the ribbon, but not the medal, had been manufactured, because it was to have been presented only to Australians and New Zealanders, but not British or other Empire soldiers involved in the campaign. Some Anzac veterans are known to have been issued with lengths of ribbon during the war in anticipation of the medal's production. In 1990, Mr Ross Smith, a former Australian Army Warrant Officer and Vietnam veteran, arranged, at his own expense, for dies from the original design to be manufactured, and for A J Parkes & Co Pty Ltd, of Brisbane, to strike 1000 examples of the medal. 200 of these stars were presented to surviving Australian and New Zealand Gallipoli veterans to mark the 75th anniversary of the campaign. The remainder were sold to the public. A further 1000 were later struck for sale to collectors. The design features an eight pointed star, representing the states and territories of Australia (seven points) and New Zealand. The colours of the ribbon are blue, representing the ocean, gold, representing Australian Wattle, silver grey, representing New Zealand fern, and red for the colour of Australian gum blossom and the New Zealand Rata flower. This full size accurate replica was presented in the early 1990's to the remaining survivors of the 1915 Gallipoli landing. The Gallipoli Star Medal 1914-1915 was to be awarded to survivors of the Anzac landing but a political dispute of the exclusion of British Soldiers saw the idea withdrawn. Timber look frame containing medal on yellow/blue/red ribbon and paper with black writing on grey cardboard surround.gallipoli star, medal, 1914-1915

Wodonga Football Club’s first recorded match was against the Albury Football Club on Saturday, 6 July 1878 in Wodonga. Between 1878 and 1891, Wodonga played many intermittent friendly matches against other local clubs and towns, before organised fixtures and competitions were starting to be arranged from the early 1890s In 1899, the Wodonga Football Club "Starlights" Junior Club was formed and adopted the Club colours of blue, black and a white star. In 1903, 1904 and 1905, the Wodonga Football Club "Shamrocks" entered a team in the local Federal Junior Football Association. In April 1906, the Wodonga Football Club "Shamrocks" met and decided to become a Senior team and be known as just the Wodonga FC The Club, currently a member of the Ovens and Murray Football League, has participated in a variety of local leagues and competition since then, apart from the years of the First and Second World Wars when they went into recess. The support the club has shown to its members was evidenced around 1949, when the Wodonga FC set up a Provident Fund for injured players to be compensated if they were not able to work for a length of time. In 1981, Wodonga achieved the rare feat of winning football Premierships in the Firsts, Seconds and Thirds. No other team has done this. The club has played in the finals 33 of the 74 years, winning seven senior premiership flags. Wodonga Football Club was first established in 1878 and has played an important role in the community since that time. It has been successful not only on the sporting field, but has provided support and social connection to its members and their families. Several of its players have gone on to perform to at an elite standard in higher levels of competition.A Patron's pin and badge in maroon, white and gold colours. The main badge features a bulldog, the symbol of the Wodonga Football Club in the centre.On the pin "PATRON". Around the edge of the oval "WODONGA/ FOOTBALL CLUB"wodonga bulldogs, wodonga football club, country football, sport, wodonga

The ship building company E. & A. Sewall, from Bath, Maine, USA, built many ships that had wheels with the same decorative, starburst pattern on them as this particular wheel segment, including the Eric the Red. The wheel was manufactured by their local Bath foundry, Geo. Moulton & Co. and sold to the Sewall yard for $100, according to the construction accounts of the vessel. Eric the Red was a wooden, three masted clipper ship. She had 1,580 tons register and was the largest full-rigged ship built at Bath, Maine, USA in 1871. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, and was the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows that Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) - about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. On 4th September 1880 the ship had been sailing for an uneventful 85 days and the voyage was almost at its end. Eric the Red approached Cape Otway in a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. Captain Allen ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats, the mizzenmast fell, with all of its rigging, then the mainmast fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Cries were heard coming from out of the darkness. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts and bravery, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod, samples of wood and a medal for bravery. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Segment of a ship's wheel, or helm, from the wreck of the sailing ship Eric the Red. The wheel part is an arc shape from the outer rim of the wheel and is made up of three layers of timber. The centre layer is a dark, dense timber and is wider than the two outer layers, which are less dense and lighter in colour. The wheel segment has a vertically symmetrical, decorative copper plate inlaid on the front. The plate has a starburst pattern; six stars decorate it, each at a point where there is a metal fitting going through the three layers of timber to the rear side of the wheel. On the rear each of the six fittings has an individual copper star around it. The edges of the helm are rounded and bevelled, polished to a shine in a dark stain. Around each of the stars, front and back, the wood is a lighter colour, as though the metal in that area being polished frequently. The length of the segment suggests that it has probably come from a wheel or helm that had ten spokes. (Ref: F.H.M.M. 16th March 1994, 239.6.610.3.7. Artefact Reg No ER/1.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's-wheel, eric-the-red, helm, shei's wheel, ship's steering wheel

Examples of the harness used on WW1 horse drawn vehicles.There are 6 pieces of leather strappings, for hourse drawn with heavy metal fittings. .1 Leather strap 23 cm x 3 cm wide. 3 pieces of iron link fittings. .2 Leather strap large. 55 mm wide 77 cm long 5 metal links. A 23 cm smaller piece of leather strap is attached to the links. .3 Piece large leather strap. 77 cm long. One end has opened up. Links missing - other end has 31 cm x 3 cm strap sewn on. the smaller strap has stamped into it - E + A Noir it 1915. .4 Large leather strap 77 cm long width 5 cm. One end has 5 iron links. Other end has smaller strap sewn on. 48 cm long width 3.5 cm .5 + .6 Very large strap. Avg 12 cm wide - length 103. 4 sets iron couplings with smaller connections strap and irons at each end. .3) Stamped on smaller strap: 'E + A Noirit 1915'ww1 - horse harness, military equipment, transport - horse, trades - leatherwork

This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army

Floor length dress of royal blue silk fabric with a metallic thread forming a tinsel like pattern. There is a V neck at front with a high round neck at the back. The bodice front is made from two pieces with a centre seam. The bodice is attached to midriff panel of royal blue satin. At the front the bodice is gathered slightly onto the panel with a V shape at t centre front of the panel. At the hip line centre front the midriff panel narrows and then widens and the panel extends to the hem. The centre panel is divided and has a godet insert in the centre. Fifteen decorative fabric covered buttons with roulette loops are attached at centre of midriff panel. The back of the bodice is one piece is gathered slightly into a high waisted skirt made up of four gored pieces. The side opening (21 cm) at the waist on the LHS has three metal hooks with cotton loops and two press studs. The long sleeves are set in with lily point finish at the wrist. The underside of the sleeve at the wrist has ten decorative fabric covered buttons with roulette loops. Machine and hand stitched.costume, female daywear, blue silk dress

Clothing. Beautiful deep cream silk bodice, fully lined with cream tulle/net. Elbow length sleeves have a semi-circle of embroidered silk, and an embroidered tulle ''flounce'', edged with cream cord - 17 cms long. The bodice has seven pin-tucks, angled from the shoulder to the waistline on each side of the front and back. Between the pin-tucks at centre front panel is an extensive cream silk, floral embroidery. A rounded neckline at front and back, is in-filled with embroidered tulle - small 1 cm diameter flowers, in a 3 cm diameter circle, defined by 12 small (3mm) embroidered circles. The tulle infill extends to a 7 cm high stand-up collar-supported by seven plastic ''bones''. The collar also features the same, circular, floral embroidery, and is also edged at the throat with cream cording. The bodice while in good condition, has been cut at the hemline, and a 10.5 cm strip of fabric has been added but unfinished. 18 metal hooks, and hand-stitched loops fasten the back of the bodice. Sleeves are an extension of the bodice.costume, female, cream silk and tulle bodice

.A clear glass bottle with eight one centimetre wide vertical groves in most of its length. Painted on the bottle in white is, C.J.GLOVER ,TRADE MARK PROGRESS REGISTERED, which has a coat of arms over it, BENDIGO, BRITISH SYPHON CO, LTD LONDON, REGNO 762. The bottle is 10.5 centimetres diameter at its base and tapers to eight and a half diameter, in the next 20 centimetres, the next eight centimetres tapers to three and a half centimetres the last eight centimetres to two and a half centimetres, the next three centimetres it rounds off to three centimetres. There is a red metal cap on top which is three centimetres diameter for two centimetres then tapers for two centimetres to one and a half centimetres which continues for two and a half centimetres with a slight flair at the top There is a small wooden cap on the top and a four by one centimetre curved wooden handle is attached near the top. On the tapered part of the cap there is metal tube protruding down at a 45-degree angle and is four centimetres long and one centimetre diameter. The bottle has a small amount of liquid in it.bottle, c.j.glover, soda bottle

High waisted bodice, with centre front seam, back opening fastened with metal press-studs, and finished on the right side, with ball-shaped pearl buttons sewn in pairs - six groups of two. A placket extends into the skirt at back, and is fastened with metal press-studs. Bodice is gathered onto skirt at waistline, and defined with a 1.5cm wide tape. An 8.5cm wide cotton lace frill is gathered around the high neckline. The wrist-length sleeves are an extension of the bodice and have a 4cm band, and 4cm wide gathered frill at the wrist. The sleeves are shaped from the high waistline, and also at the cuff edge. The skirt has an overlay of fine lace, made up of six X 17cm wide bands of lace, with a scalloped edge. No shoulder seams. Back opening and centre front seam indicate the cutting out layout of fabric. A one cm wide ribbon finishes the neckline, and the lace frill is hand stitched to the ribbon. Some seams are hand neatened. A 2.5cm wide flat bow finishes the back neckline.costume, female, cream satin and lace wedding dress

Object. Rich royal blue grosgrain braid, 10 cms wide surrounds a rectangle of cream kid leather, 21 cm wide x 24 cms deep. On this rectangle is an embroidered wreath of foliage in gold and orange coloured thread, embellished with gold metal thread, which also outlines an embroidered bow, at the base of the wreath. In the centre of the wreath, a looped bow is embroidered in thread, and embellished with the gold metal thread. Two gold coloured metal decorative shapes are placed, one on each side of the lower edge of the leather. Two 5 cm wide tabs, adorned with a heavy lodge symbol, including 4 cm long brass metal chain, with ball decorative elements, hang from the waist, and fall to 3/4 length of the leather panel. A peaked flap 9 cm deep is attached from the waistband, and falls loosely over the leather panel. It is also adorned with a brass metal lodge symbol. Black elastic, 3 cm wide attaches at right hand side of waistband, and fastens into an oval metal loop at left hand side.Label on underside of front Vshaped panel 110 years of Service, P.Blashki & Sons 109-113 Swanson Street Melbourne,(and includes Lodge Symbol)organisation, masonic lodge, lodge regalia apron

Fine, soft silk, woven with a two mm spot, spaced at one cm all over the fabric.Above the wrist-length sleeves finished with a six cm wide black velvet cuff. Sleeves are gathered at the shoulder and the cuff. A 26cm long ''over -sleeve'' is gathered at the shoulder, and edged with two bands of black velvet-one of .8 of 1cm, and one 2cm wide. Bodice has a 6.5cm stand-up mandarin style collar, which is boned in three places. Three metal hooks, and embroidered eyelets fasten the collar - (2 damaged). The shoulder line has 12 pintucks, 20 cm long, and finishing to give fullness to the bustline. Six pintucks either side of back opening. Over the shoulders is a loose panel - 25cm wide at the shoulder, tapering to 7.5cm wide at the waistline - five bands of velvet taper from shoulder to waistline, emphasing a V shape, from shoulders to narrow waist. A 17cm deep panel of pintucking extends from shoulders at front and back. Six X 4cm deep tucks extend from the pintucks to the waistline.costume, female, victorian black silk and velvet bodice

The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. These include artefacts (wallpapers, textiles, carpet samples), furnishings, printed materials (catalogues, books, periodicals), and pictures (photographs).Part of a group of curtain furnishings which includes a curtain with original fittings, fringe and braid unpicked from other curtains, and these six curtain tie backs. The six curtain tie backs are identical, though one pair is shorter. The tie backs comprise a length of soft, loose (floss) silk cord, made of two thick strands twisted together (cable cord). An elaborate tassel is attached to the middle of each cord, to weight the tie back in an elegant loop, with the loose ends attached to hooks or pins on the window frame. Each tassel is formed of a turned wooden mould, covered with floss silk thread, and further decorated with knotted netting, applied braid, and glass beads. The end of the mould has a large flattened shape, from which hangs a ring of long, bullion metal fringe. This may be silver-gilt: untarnished parts are still true gold colour, while the majority of the fringing is tarnished black. These curtain decorations are truly luxurious; the original suite of curtains would have been very expensive, an eloquent item of conspicuous consumption of luxury goods.Attached handwritten note : "VA Th 7/6/2012 Ric Freeman (Nat Trust member) & Julie Freeman / re soft furnishings, tassels, trimmings, braid set / Jessie, Terry (and Chris St) to view, collect"decorative arts & design, interior decoration - history, curtain accessories, tassels

Annual Report by C. Bogue Luffmann, in the Department of Agriculture Annual Report 1900 pp 262-311. 2 copies This is a photocopy of the original report. The report is headed "Department of Agriculture, Victoria." At this time the Burnley School of Agriculture was under the jurisdiction of the Dept. of Agriculture. The report was prepared by the Principal C. Bogue Luffmann. It is 54 pages in length, contains an annual report and prospectus, an examination paper, eight essays on horticultural subjects, 4 of these by Mr Bogue Luffmann and the remainder by students. Essays contained in the Annual Report are: Profitable Branches of Agriculture for Victoria - C Bogue Luffmann (Principal) Trunks and Branches - C Bogue Luffmann Girdling Cincturing Lancing Bandaging & Hardening of Bark - C Bogue Luffmann Humus - Tessa Smith (2nd year student) An examination paper - I Higgins (2nd year student) The Requisite Qualifications of the Commercial Fruit Grower - M.W. Thompson (2nd year student) Fruit Tree Stocks - M.W. Thompson An Examination Paper - H.R. Ward (1st year student) and M. Thatcher (1st year student) charles bogue luffman, principal, student essays, c b luffmann essays, horticulture essays, 1900 horticulture writing, cincturing, girdling, lancing, bandaging horticulture, humus, fruit growing, horticulture turn of the century, horticulture school report, luffmann

This drum carder was purchase by Gill Stange at the Whittlesea Show in the late 1980s. The carder allowed Gill to spin fleece from her own Merino sheep. Merino is a difficult wool to spin when compared to other popular varieties, such as Corriedale or crossbred wool. The carder helped her to tease out the fleece, slightly separating the fibres before spinning. It also allowed for easier removal of foreign matters, such as seeds and mud. Little is known about the Kacoonda brand who produced the carder. They were Australian based and appear to have only operated throughout the 1980s.The carder has one large central roller with two smaller rollers on either side. The larger roller rotates in the inverse direction of the two smaller rollers. The carding cloth is a mint green in which closely spaced wire pins are embedded. The shape, length, diameter, and spacing of these wire pins is that of a standard carder. On one side of the carder a handle is found that is used to spin the three rollers. Additionally on this side is a sticker which reads “The Kacoonda Carder. Subject to Patent Action”. A Silver grip for the easy movement of the carder can also be found high on this side. On the opposite side of the carder, many nuts and plates can be found which hold the rollers in place. This is opposed to the other side of the carder, which has a brown plastic cover plate attached underneath the handle. The walls providing a path for the carded wool to follow when being carded, are made of wood. The carder comes complete with a teasing tool. This tool has the same mint green carding cloth as the carder’s rollers. It is attached to a simple wood handle for ease of use.Wording, green, printed. Sticker on side of carder. “The Kacoonda Carder / SUBJECT TO PATENT ACTION”whittlesea show, drum carder, textile production, carding wool, kacoonda

Ms. J. Caeli is the RDNS Medical Records Librarian and is visiting Ms.Val Douglas, the RDNS Social Worker, in her Office at RDNS Headquarters, 452 St. Kilda Road,Melbourne. Ms. Caeli is giving instruction to Ms. Douglas regarding statistics for Social Work. The Melbourne District Nursing Society (MDNS) were the first in Melbourne, in early 1928, to recognize some patients leaving the MDNS After-Care Home, and many at home, needed further social care. They set up ‘Almoners’ from their Committee to visit these patients and be intermediaries in getting them social assistance. It was late the following year before the first training of Almoners took place in Melbourne. In 1930 the Society employed a full time kindergarten teacher to visit poor children in their homes. In December 1934 the first full-time trained district Almoner, Miss Una Riall, was employed and carried out a great deal of work with the Society’s Midwifery patients. In 1935 she resigned as she felt the amount of work required needed more than one person. The Society were unable to obtain a replacement due to the shortage of trained Almoners so a Social Service Department was set up and a Social Service Officer, Sister Tupper, was employed at the After-Care Home; she successfully gained better housing from the Housing Commission for families living under unsuitable conditions. By 1941 conditions had improved with full employment of breadwinners and Sr. Tupper was appointed the Matron of the District Nursing Division of MDNS. In 1974, now as Royal District Nursing Service (RDNS), it was recognized the Service needed allied health workers and Ms. Val Douglas was employed as the RDNS first Social Worker.On the left of this black and white photograph is Royal District Nursing Service (RDNS), Ms. J. Caeli, who has collar length dark curled hair and is wearing a light and dark patterned and striped shirt style frock. She is standing with her left hand resting on a desk, and looking down at a pen in her right hand which is poised over a sheet of white paper held by Ms Val Douglas who is sitting to her right behind her desk. Ms Douglas is wearing dark rimmed glasses; has short wavy dark hair and is wearing a white with small grey oblong patterned dress. She is looking up at Ms. Caeli and is holding the piece of paper with her left hand. There is a large blotter, sheets of folded papers, a stapler and a small bottle of glue on the desk. In the left background is a low white cupboard with a vase of flowers and books, standing upright, on it. Behind this is white framed window.and an open long dark curtain. In the rear far right is part of a dark grey filing cabinet.Barry Sutton LY 64rdns, royal district nursing service, rdns medical records, rdns librarian, rdns social worker, mdns, melbourne district nursing society, ms j. caeli, ms val douglas

Sister Ellen Anderson is the Supervisor of the Royal District Nursing Service, (RDNS) Footscray Centre. She is wearing her RDNS uniform of a short sleeve white blouse under a royal blue V neck tunic style dress. Sr. Anderson is showing two Student nurses from Western General Hospital the map with the areas covered by Footscray Centre. The map had different colour pins to identify streets where patients lived who were currently receiving nursing care from RDNS Sisters working in these areas (districts).During their training, Student nurses from several hospitals either attended the Royal District Nursing Service (RDNS), Education Department, or, a RDNS Nurse Educator travelled to the appropriate hospital’s Education Department to educate the Trainees on District nursing through the RDNS Community Nursing Program. Following the lectures Students went to a RDNS Centre and each Student accompanied a Trained nurse (Sister) for a week observing and gaining knowledge of all facets of nursing care in the home. This gave them an insight into the home conditions and situations patients faced after discharge from hospital. During 1971 there were 584 Student nurses who received field experience with RDNS. From its inception as Melbourne District Nursing Society (MDNS), in 1885, their Trained nurses (Nurses) worked in specific areas, 'districts'. The first Nurse worked east and west, between Victoria Parade and Flinders Street and, north and south, between Spencer Street and Spring Street. When a second Nurse was employed they divided this area at Elizabeth Street so each Nurse could attend to patients in the same area giving continuity of care. As the Society expanded, becoming Melbourne District Nursing Service, then, with Royal patronage, Royal District Nursing Service (RDNS) many Centres were opened throughout the Melbourne Metropolitan area and outer suburbs. The District nurse's areas (districts) grew and were divided within Shire boundaries for e.g. Knox 1, Knox 2, Knox 3, Knox 4, within the area of the Shire of Knox. A map covering the Centre’s Districts was attached to a wall, and its different colour pins identified streets where patients lived who were currently receiving nursing care from the RDNS Trained nurses (Sisters) working in these areas (districts).On the left of this black and white photograph is Royal District Nursing Service (RDNS), Sister Ellen Anderson, who has short dark curly hair and is wearing her RDNS uniform of a short sleeve white blouse under a dark V neck tunic style frock. She is standing side-on, towards the right of the photograph, and with her left hand is pointing to an area on a large map attached to the wall in the background. To her right, is a Student nurse who is facing Sr. Anderson, and looking at the area on the map. Under her white nurses cap, she has her long dark hair drawn back, and is wearing her hospital uniform of a short sleeve checked dress with white collar and cuffs; a nursing watch is attached to its upper left; her hands are clasped in front of her. To her right, is a male Student nurse who has collar length straight dark hair, and is wearing white trousers and a short sleeve white top with pens in the left upper pocket. He is looking at the areas on the map.. Barry Sutton MA 77 informationroyal district nursing service, rdns, rdns education, rdns centre, rdns district map, sister ellen anderson

This afternoon dress was owned and first worn in 1875 by Alice (Henty) Hindson, the daughter of Francis Henty and Mary Ann (Lawrence) Henty. The outfit was worn in the same year as Alice's marriage to John Hindson at Trinity Church, East Melbourne, and may have formed part of her trousseau. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.Alice (Henty) Hindson's afternoon dress is a two-piece, two-toned pink ensemble made of silk taffeta. The detailing is done with fine knife-pleated trims piped in ivory satin and decorated with ivory silk moiré bows on the bodice and skirt. The panelled peplum jacket is boned and the front button closure has hand-embroidered buttonholes with handmade covered buttons. The gathered full buttoned skirt falls into a train. The skirt is decorated with rows of ivory tulle corded lace and the hemline is edged with crisp fluted organza and tatted lace. Measurements (mm): BODICE: Girth - Neck 355.6, Chest 863.6, Waist 685.8, Hip 787.4, Cuff 304.8, Hem circumference 1422.4. Vertical - From neck to hem 546.1, Front waist to hem 241.3, Back neck to hem 609.6, Back waist to hem 355.6, Sleeve length 330.2. Horizontal - Neck to sleeve head 60, Underarm to underarm 419.1. SKIRT Girth - Waist 558.8, Hip 1473.2, Hem circumference 3911.6. Vertical - Front waist to hem 1092.2, Back waist to hem 1524. fashion -- 1870s, afternoon dresses, alice (henty) hindson, women's clothing

This coat would have been part of a St Johns Brigade ambulance uniform. The buttons were made by A J Parkes, who manufactured buttons for the Australian Defence force. A J Parkes began manufacturing plastic injection moulded buttons from the early 1980's which suggests that the coat would have been made and worn during the late 20th century.This item is representative of a particular piece of uniform that would have been worn by a member of the St Johns Ambulance Brigade. It has historic significance as an item dating to the late 20th century which may have been used in the service of wounded military personnel. It also has some areas of staining which could have been coused by contact with blood. This could potentially be useful for scientific research purposes.Off white knee length coat with long sleeves. There is an epoulette on each shoulder and pointed collars. There is a deep waist pocket on either side of the coat. There is one silver plastic button at the top of each pocket. These have the St John Ambulance symbol on the front, which consists of an eight pointed cross, with two very small lions and two very small unicorns nestled in the corners of the cross. These motifs are surrounded by the words "THE ST JOHN AMBULANCE BRIGADE". The epoulettes are fastened with one identical button each. Underneath each epoulette there is also a clear plastic button attached the shoulder seam. Each sleeve has a 36mm long cuff which is fastened with one St John Ambulance Brigade button each. There are 10 clear plastic buttons that fasten the entire front of the coat. The back has two pleats commencing near the nape of the neck. The back of the collar on the interior seam has a label which has been cut and shows only a small amount of detail. Printed in faded blue on the label is: "E.R. TIMMINS".military, coat, st johns brigade, uniform, ambulance, st johns brigade ambulance, st johns