B Class Trophy (Cup) Donor: Deed of Gift: The trophy was originally donated for use by B class in 1929/30 then in 1968 for a short time was used for ‘off the beach’ classes. Following this, it was for a short time awarded to the IRC handicap winner of the G. E. Duncans Race to Mornington. In season 2009/10 it was once again changed. First Winner: Toogooloowoo II, W. S. Dagg 1929/30 b class, irc

Yields information about the delivery run of tram 18 to Borough of Sebastopol and how it was delivered using a tractor.Black and White copy photograph of a newspaper photograph taken by The Courier - photo taken 30/9/1971, published 1/10/1971 of No. 18 being towed by tractor along Albert St, Sebastopol on the way to Victory Park for display. See Reg Item 2909 for the actual Newspaper cutting and 6599 for colour slides of the move. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details. 3778.1 - Black and white photograph of the hand over from the SEC to the Borough at the resting place of the tram. Features Cr. N. F. Donald and Mr. I. F. Pellas at the handover. Photo shows the construction of the enclosure for the tram. .1 - Print of original photograph print added 14-3-2016 from the donation to the Museum by Karelyn Satter Feb. 2016.Has the Ballarat Courier stamp on the rear.tramways, trams, sebastopol, borough of sebastopol, victory park, transport, closure, tram 18

Exercise Report on exercise Mapex 78. The exercise was designed to test the Army Survey Regiment in an intensive production phase of 30 days duration.A4 soft covered booklet, printed map of part of the Kimberley region of Western Australia on front and back covers, staple boundTop right hand corner of front cover "File on 788-2-14"royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Grave of William J. Hall (died 1883) in Plot# G7 Greensborough Cemetery. Photograph taken by Noel Withers 30/07/2009.Greensborough Cemetery was created when land was given for the cemetery by Mr William Poulter, a local settler, about 1864. The cemetery holds the graves of many of the early settlers in the district. The cemetery holds approximately 250 grave sites with 350 people buried there. Digital copy of colour photograph of grave/headstone [damaged].william j hall, greensborough cemetery

The Grave of John McLaughlin (died 15/10/1933), and Rosalie Ellen McLaughlin (died 30/09/1953), St Helena Cemetery.St Helena Cemetery was originally the burial place of the Beale family and friends. The first burials took place in the 1850s. There are now over 200 burials.Digital copy of colour photograph st helena cemetery, john mclaughlin, rosalie mclaughlin

From 30 Sep and 27 Nov 1916, Bob and Harold Snape worked together in 2nd Division HQ, in the basement of Fricourt Château, snape collection

Newspaper advertisement: Leader Associated Newspapers, Eltham Centenary Supplement, March 30, 1971 Neville F. Emerson, Real Estate Agentmain road, property, businesses, neville f. emerson, real estate agent, lower plenty village, lower plenty

Newspaper advertisement: Leader Associated Newspapers, Eltham Centenary Supplement, March 30, 1971, p2 F.J. & R. Favier, Butcher & Delicatessenmain road, property, businesses, butcher, delicatessen, f.j. & r. favier, lower plenty shops

Three country-wide Moratoriums were held in Australian capital cities. This sticker advertises the third of these days of protest, 30 June 1971.Blue sticker with white writing and positioned across the bottom is an orange design symbolizing the moratorium campaign during the Vietnam conflict.Stop work to stop the War/ Moratorium/June 30thvietnam, protesters, moratorium, protest, anti-war, malicki

Also a black and white photograph of rear view of Woodbine Guest House Bulmer photograph 05232.1 20 x 30 cm in albumBlack and white photograph of Ward's Woodbine Guest House and bowling green with team of bowlers and other folk. The well known tankstand with Woodbine House advertised on it on left of picture Lakes Entrance VictoriaMrs G Wards Woodbine Guest House Lakes Entranceguesthouses, tourism, accommodation

The map was surveyed by ship compass, distances by estimation or rate of launch by officers of the Government ; supervised and compiled by J.B. Cameron, G.S. March 1893. This map was in the possession of Charles Carty Salmon (1860-1917), politician, born on 27 July 1860 at Amherst, Victoria. (http://adb.anu.edu.au/biography/salmon-charles-carty-8328 ) Although living in Melbourne Charles Carty Salmon kept property at Talbot. The property was leased, then purchased by the donor's family. A copy of "The Goulburn Weir and its Dependent System of Works" and this map (in a government envelope addressed to Salmon) were left at the property. See http://nla.gov.au/nla.map-rm1894-1 .1) Sketch map showing the rivers and an outline of the coast from Long. 144?30'E. to Long. 146?30'E. Gulf of Papua British New Guinea Scale [ca. 1:316,800]. .2) Large envelope addressed to The Hon Charles Carty Salmon M.P., Talbot, Victoria. The map was folded and stored in this envelope. Map extending from Port Bevan to Kaikavau Pt, showing rivers and notes on soil and vegetation. Relief shown by hachures and spot heights. Also available in an electronic version via the Internet at: http://nla.gov.au/nla.map-rm1894-1 .1) "Enclosure in Despatch No. 32 of 3rd May 1893 - Appendix G.". "Map no. 4 British New Guinea report 1892-93". .2) "This envelope can only be lawfully used by Government Officials on public business. Any use by Officials on private business, or by others under any circumstances, is punishable." "Commonwealth Celebrations. General Secretary's Office, Melbourne."carty salmon, charles carty salmon, new guinea, j.b. cameron

Set of three foolscap photocopied posters, hand written originally, produced at the time of the mooted budget cuts to the MTA - late 1985 produced by "Supporter's of ATMOEA" .1 - "Save Conductors", featuring an articulated bus, to keep conductors on routes 201 and 203, Garden City - City - Bullen - dated 30/10/1985. .2 - "Save Footscray - Moonee Ponds Trams!" - route 82, features an image of an articulated tram, dated 30/10/1985. .3 - "Save Prahran - Princess Bridge Chapel St. Trams!" - route 77, similar to the Footscray one, dated 4/11/85.trams, tramways, mta, atmoea, unions, closure, finances

This iron was used to press clothes prior to the spirit and electrical irons becoming available circa 1930s - 1950s. The main body of the iron was placed on a flat heated surface of a stove (wood, coal or gas fired). It was mainly used by women in their domestic role, ironing the family's clothes and linen. In the Kiewa Valley the supply of coal or gas was not available or too expensive than the locally cut hard wood trees. Ironing was time consuming as the iron had to be heated, used and then reheated to the required level of application. Kiewa Valley farmers' wives used these irons having heated their stoves with local timber from their farms. This iron is made of cast iron. The handle is a hollow cylinder and is 70 mm above the solid 30 mm base. Presumably the handle was wrapped and/or threaded with cloth to protect the hand from the heat of the iron. The iron would have been heated on the top of a stove.6 Metters KFB Victoriairon, laundry, domestic, antique, pressing clothes, household

This model was inspired by the Morgan barn on the Marlo Road, Orbost. It was built by Chris Hodge for the launch of the book, "Barns of the Snowy River" ( Reg. No.2138)The slatted barns are unique to the Orbost district.A wooden model of a three-storeyed slatted barn. The scale is approximately 30:1.The roof is corrugated cardboard painted silver. The waater tank is a tin can covered with corrugated cardboard. The down pipes are made from drinking straws. It stands on ply board.model handcraft woodwork barn

The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e

Information re Musicael 0f the Royal Historical Society of Victoria, Bendigo Branch 30/11/1980 - Soprano, Lorna Jones; Leila Accompaniste. Printed sheet of Programme of the Musicale. . Info re December 1989 - Poetry reading by Dr Roger Sworder.person, individual, lorna jones, royal historical society of victoria, dudley house.

Black and white photograph. View of Pall Mall looking SSW. Myer store Bendigo Arcade, National Bank, MLC Buildings, Beehive Stores and 3BO. Motor vehicles, Birney Tram No. 30, Peter's Ice Cream truck and Holden utility. Inscriptions:place, streetscape, pall mall

Eleven pages document titled: Anglican Church of Australia Parish-South east Bendigo. Christ Church 100 years (cnr Strickland road, Barr and Fox Streets) Special centenary service Sunday 21 September 1997 at 10-30 am.church, church of christ, centenary

Loan application from E. McGoldrick, McCrae St., Wood Contractor, to City Loan and Discount Co., for 5/-/- with weekly instalments of 5/-. Dated 30 November, 1888. light blue six pence stamp on a 5 pound cheque dated 30.11.1888business, legal, e. mcgoldrick, wood contractor, connelly, tatchell & dunlop, city loan and discount co., loans

Invoice No. 30 from John V. Schenck for 1 Wreath Cost £2.2.0. Ex Servicemans Carpet Bowls, c/o Mr Swatton. Dated 9-8-1963. Wreath for the Late Walter Little. Green 3d Duty Stamp attached.person, receipts, j w swatton, j w swatton collection, john v schenck, ex servicemans carpet bowls, walter little

Bendigo Advertiser "The way we were" from 1999. Meeting place: the Sandhurst Coffee Palace, Mitchell Street, Sandhurst (near the railway station) had reading, smoking and dining rooms, board and lodging from 25 to 30 shillings per week.newspaper, bendigo advertiser, the way we were

From Vine to Wine 'By an Orlando Grape'. Brown book with cloth cover, writing on the front cover is in gold. 30 pages, text one side and photos on the other. Book is by G. Gramp and Sons Ltd, recounting 100 years they've been in business.an Orlando Grapebooks, technical, wine making, cohn brothers.g. gramp and sons, orlando

Yields information about Ballarat's trams in Lydiard St North and the tram operations.Agfa blue/white mount, colour slide of trams 33 and 30 at the Lydiard St North terminus. Tram 33 has roof adverts for Eureka Tiles and Bliss Bombs and a Twin Lakes sign on the front. Both trams have the destination of Sebastopol."11-4-71" in ink.tramways, trams, lydiard st north, tram 33, tram 30

Yields information about the appearance of Bendigo trams early 1970's and the Charing Cross area.Black and White Photograph of SEC Bendigo 30, Birney en route to North Bendigo , possibly in McCrae St. Tram has the destination of North Bendigo. Note conductor at the front of the tram, talking to the driver. Photo Chris Wurr, early 1970's. "Photo by Chris Wurr" stamped on the rear.trams, tramways, bendigo, north bendigo, mccrae st, birney, tram 30